.. _setup:

Setup
=====

Paperless isn't a very complicated app, but there are a few components, so some
basic documentation is in order.  If you follow along in this document and
still have trouble, please open an `issue on GitHub`_ so I can fill in the
gaps.

.. _issue on GitHub: https://github.com/danielquinn/paperless/issues


.. _setup-download:

Download
--------

The source is currently only available via GitHub, so grab it from there,
either by using ``git``:

.. code:: bash

    $ git clone https://github.com/danielquinn/paperless.git
    $ cd paperless

or just download the tarball and go that route:

.. code:: bash

    $ cd to the directory where you want to run Paperless
    $ wget https://github.com/danielquinn/paperless/archive/master.zip
    $ unzip master.zip
    $ cd paperless-master


.. _setup-installation:

Installation & Configuration
----------------------------

You can go multiple routes with setting up and running Paperless. The `Vagrant
route`_ is quick & easy, but means you're running a VM which comes with memory
consumption etc. We also `support Docker`_, which you can use natively under
Linux and in a VM with `Docker Machine`_ (this guide was written for native
Docker usage under Linux, you might have to adapt it for Docker Machine.)
Not to forget the virtualenv, this is similar to `bare metal`_ with the
exception that you have to activate the virtualenv first.
Last but not least, the standard `bare metal`_ approach is a little more
complicated, but worth it because it makes it easier should you want to
contribute some code back.

.. _Vagrant route: setup-installation-vagrant_
.. _support Docker: setup-installation-docker_
.. _bare metal: setup-installation-standard_
.. _Docker Machine: https://docs.docker.com/machine/


.. _setup-installation-standard:

Standard (Bare Metal)
.....................

1. Install the requirements as per the :ref:`requirements <requirements>` page.
2. Within the extract of master.zip go to the ``src`` directory.
3. Copy ``paperless.conf.example`` to ``/etc/paperless.conf`` also the virtual
   envrionment look there for it and open it in your favourite editor.
   Because this file contains passwords it should only be readable by user root
   and paperless !  Set the values for:

    * ``PAPERLESS_CONSUMPTION_DIR``: this is where your documents will be
      dumped to be consumed by Paperless.
    * ``PAPERLESS_PASSPHRASE``: this is the passphrase Paperless uses to
      encrypt/decrypt the original document.
    * ``PAPERLESS_OCR_THREADS``: this is the number of threads the OCR process
      will spawn to process document pages in parallel.

4. Initialise the SQLite database with ``./manage.py migrate``.
5. Create a user for your Paperless instance with
   ``./manage.py createsuperuser``. Follow the prompts to create your user.
6. Start the webserver with ``./manage.py runserver <IP>:<PORT>``.
   If no specifc IP or port are given, the default is ``127.0.0.1:8000``
   also known as http://localhost:8000/.
   You should now be able to visit your (empty) at `Paperless webserver`_ or
   whatever you chose before.  You can login with the user/pass you created in
   #5.
7. In a separate window, change to the ``src`` directory in this repo again,
   but this time, you should start the consumer script with
   ``./manage.py document_consumer``.
8. Scan something or put a file into the  ``CONSUMPTION_DIR``.
9. Wait a few minutes
10. Visit the document list on your webserver, and it should be there, indexed
    and downloadable.

.. _Paperless webserver: http://127.0.0.1:8000


.. _setup-installation-vagrant:

Vagrant Method
..............

1. Install `Vagrant`_.  How you do that is really between you and your OS.
2. Run ``vagrant up``.  An instance will start up for you.  When it's ready and
   provisioned...
3. Run ``vagrant ssh`` and once inside your new vagrant box, edit
   ``/etc/paperless.conf`` and set the values for:

    * ``PAPERLESS_CONSUMPTION_DIR``: this is where your documents will be
      dumped to be consumed by Paperless.
    * ``PAPERLESS_PASSPHRASE``: this is the passphrase Paperless uses to
      encrypt/decrypt the original document.
    * ``PAPERLESS_SHARED_SECRET``: this is the "magic word" used when consuming
      documents from mail or via the API.  If you don't use either, leaving it
      blank is just fine.

4. Exit the vagrant box and re-enter it with ``vagrant ssh`` again.  This
   updates the environment to make use of the changes you made to the config
   file.
5. Initialise the database with ``/opt/paperless/src/manage.py migrate``.
6. Still inside your vagrant box, create a user for your Paperless instance
   with ``/opt/paperless/src/manage.py createsuperuser``. Follow the prompts to
   create your user.
7. Start the webserver with
   ``/opt/paperless/src/manage.py runserver 0.0.0.0:8000``. You should now be
   able to visit your (empty) `Paperless webserver`_ at ``172.28.128.4:8000``.
   You can login with the user/pass you created in #6.
8. In a separate window, run ``vagrant ssh`` again, but this time once inside
   your vagrant instance, you should start the consumer script with
   ``/opt/paperless/src/manage.py document_consumer``.
9. Scan something.  Put it in the ``CONSUMPTION_DIR``.
10. Wait a few minutes
11. Visit the document list on your webserver, and it should be there, indexed
    and downloadable.

.. _Vagrant: https://vagrantup.com/
.. _Paperless server: http://172.28.128.4:8000


.. _setup-installation-docker:

Docker Method
.............

1. Install `Docker`_.

   .. caution::

      As mentioned earlier, this guide assumes that you use Docker natively
      under Linux. If you are using `Docker Machine`_ under Mac OS X or
      Windows, you will have to adapt IP addresses, volume-mounting, command
      execution and maybe more.

2. Install `docker-compose`_. [#compose]_

   .. caution::

       If you want to use the included ``docker-compose.yml.example`` file, you
       need to have at least Docker version **1.10.0** and docker-compose
       version **1.6.0**.

       See the `Docker installation guide`_ on how to install the current
       version of Docker for your operating system or Linux distribution of
       choice. To get an up-to-date version of docker-compose, follow the
       `docker-compose installation guide`_ if your package repository doesn't
       include it.

       .. _Docker installation guide: https://docs.docker.com/engine/installation/
       .. _docker-compose installation guide: https://docs.docker.com/compose/install/

3. Create a copy of ``docker-compose.yml.example`` as ``docker-compose.yml``
   and a copy of ``docker-compose.env.example`` as ``docker-compose.env``.
   You'll be editing both these files: taking a copy ensures that you can
   ``git pull`` to receive updates without risking merge conflicts with your
   modified versions of the configuration files.
4. Modify ``docker-compose.yml`` to your preferences, following the
   instructions in comments in the file. The only change that is a hard
   requirement is to specify where the consumption directory should mount.
5. Modify ``docker-compose.env`` and adapt the following environment variables:

   ``PAPERLESS_PASSPHRASE``
     This is the passphrase Paperless uses to encrypt/decrypt the original
     document.

   ``PAPERLESS_OCR_THREADS``
     This is the number of threads the OCR process will spawn to process
     document pages in parallel. If the variable is not set, Python determines
     the core-count of your CPU and uses that value.

   ``PAPERLESS_OCR_LANGUAGES``
     If you want the OCR to recognize other languages in addition to the
     default English, set this parameter to a space separated list of
     three-letter language-codes after `ISO 639-2/T`_. For a list of available
     languages -- including their three letter codes -- see the
     `Debian packagelist`_.

   ``USERMAP_UID`` and ``USERMAP_GID``
     If you want to mount the consumption volume (directory ``/consume`` within
     the containers) to a host-directory -- which you probably want to do --
     access rights might be an issue. The default user and group ``paperless``
     in the containers have an id of 1000. The containers will enforce that the
     owning group of the consumption directory will be ``paperless`` to be able
     to delete consumed documents. If your host-system has a group with an ID
     of 1000 and you don't want this group to have access rights to the
     consumption directory, you can use ``USERMAP_GID`` to change the id in the
     container and thus the one of the consumption directory. Furthermore, you
     can change the id of the default user as well using ``USERMAP_UID``.

6. Run ``docker-compose up -d``. This will create and start the necessary
   containers.
7. To be able to login, you will need a super user. To create it, execute the
   following command:

   .. code-block:: shell-session

       $ docker-compose run --rm webserver createsuperuser

   This will prompt you to set a username (default ``paperless``), an optional
   e-mail address and finally a password.
8. The default ``docker-compose.yml`` exports the webserver on your local port
   8000. If you haven't adapted this, you should now be able to visit your
   `Paperless webserver`_ at ``http://127.0.0.1:8000``. You can login with the
   user and password you just created.
9. Add files to consumption directory the way you prefer to. Following are two
   possible options:

   1. Mount the consumption directory to a local host path by modifying your
      ``docker-compose.yml``:

      .. code-block:: diff

         diff --git a/docker-compose.yml b/docker-compose.yml
         --- a/docker-compose.yml
         +++ b/docker-compose.yml
         @@ -17,9 +18,8 @@ services:
                  volumes:
                      - paperless-data:/usr/src/paperless/data
                      - paperless-media:/usr/src/paperless/media
         -            - /consume
         +            - /local/path/you/choose:/consume

      .. danger::

          While the consumption container will ensure at startup that it can
          **delete** a consumed file from a host-mounted directory, it might
          not be able to **read** the document in the first place if the access
          rights to the file are incorrect.

          Make sure that the documents you put into the consumption directory
          will either be readable by everyone (``chmod o+r file.pdf``) or
          readable by the default user or group id 1000 (or the one you have
          set with ``USERMAP_UID`` or ``USERMAP_GID`` respectively).

   2. Use ``docker cp`` to copy your files directly into the container:

      .. code-block:: shell-session

         $ # Identify your containers
         $ docker-compose ps
                 Name                       Command                State     Ports
         -------------------------------------------------------------------------
         paperless_consumer_1    /sbin/docker-entrypoint.sh ...   Exit 0
         paperless_webserver_1   /sbin/docker-entrypoint.sh ...   Exit 0

         $ docker cp /path/to/your/file.pdf paperless_consumer_1:/consume

      ``docker cp`` is a one-shot-command, just like ``cp``. This means that
      every time you want to consume a new document, you will have to execute
      ``docker cp`` again. You can of course automate this process, but option
      1 is generally the preferred one.

      .. danger::

          ``docker cp`` will change the owning user and group of a copied file
          to the acting user at the destination, which will be ``root``.

          You therefore need to ensure that the documents you want to copy into
          the container are readable by everyone (``chmod o+r file.pdf``)
          before copying them.


.. _Docker: https://www.docker.com/
.. _docker-compose: https://docs.docker.com/compose/install/
.. _ISO 639-2/T: https://en.wikipedia.org/wiki/List_of_ISO_639-1_codes
.. _Debian packagelist: https://packages.debian.org/search?suite=jessie&searchon=names&keywords=tesseract-ocr-

.. [#compose] You of course don't have to use docker-compose, but it
   simplifies deployment immensely. If you know your way around Docker, feel
   free to tinker around without using compose!


.. _setup-permanent:

Making Things a Little more Permanent
-------------------------------------

Once you've tested things and are happy with the work flow, you can automate
the process of starting the webserver and consumer automatically.


.. _setup-permanent-standard-systemd:

Standard (Bare Metal, Systemd)
..............................

If you're running on a bare metal system that's using Systemd, you can use the
service unit files in the ``scripts`` directory to set this up.  You'll need to
create a user called ``paperless`` (without login (if not already done so #5))
and setup Paperless to be in a place that this new user can read and write to.
Be sure to edit the service  scripts to point to the proper location of your
paperless install, referencing the appropriate Python binary. For example:
``ExecStart=/path/to/python3 /path/to/paperless/src/manage.py document_consumer``.
If you don't want to make a new user, you can change the ``Group`` and ``User``
variables accordingly.

Then, as ``root`` (or using ``sudo``) you can just copy the ``.service`` files
to the Systemd directory and tell it to enable the two services::

    # cp /path/to/paperless/scripts/paperless-consumer.service /etc/systemd/system/
    # cp /path/to/paperless/scripts/paperless-webserver.service /etc/systemd/system/
    # systemctl enable paperless-consumer
    # systemctl enable paperless-webserver
    # systemctl start paperless-consumer
    # systemctl start paperless-webserver


.. _setup-permanent-standard-ubuntu14:

Ubuntu 14.04 (Bare Metal, Upstart)
..................................

Ubuntu 14.04 and earlier use the `Upstart`_ init system to start services
during the boot process. To configure Upstart to run Paperless automatically
after restarting your system:

1. Change to the directory where Upstart's configuration files are kept:
   ``cd /etc/init``
2. Create a new file: ``sudo nano paperless-server.conf``
3. In the newly-created file enter::

    start on (local-filesystems and net-device-up IFACE=eth0)
    stop on shutdown

    respawn
    respawn limit 10 5

    script
      exec /srv/paperless/src/manage.py runserver 0.0.0.0:80
    end script

   Note that you'll need to replace ``/srv/paperless/src/manage.py`` with the
   path to the ``manage.py`` script in your installation directory.

  If you are using a network interface other than ``eth0``, you will have to
  change ``IFACE=eth0``. For example, if you are connected via WiFi, you will
  likely need to replace ``eth0`` above with ``wlan0``. To see all interfaces,
  run ``ifconfig -a``.

  Save the file.

4. Create a new file: ``sudo nano paperless-consumer.conf``

5. In the newly-created file enter::

    start on (local-filesystems and net-device-up IFACE=eth0)
    stop on shutdown

    respawn
    respawn limit 10 5

    script
      exec /srv/paperless/src/manage.py document_consumer
    end script

  Replace ``/srv/paperless/src/manage.py`` with the same values as in step 3
  above and replace ``eth0`` with the appropriate value, if necessary. Save the
  file.

These two configuration files together will start both the Paperless webserver
and document consumer processes when the file system and network interface
specified is available after boot. Furthermore, if either process ever exits
unexpectedly, Upstart will try to restart it a maximum of 10 times within a 5
second period.

.. _Upstart: http://upstart.ubuntu.com/


.. _setup-permanent-vagrant:


Using a Real Webserver
......................

The default is to use Django's development server, as that's easy and does the
job well enough on a home network.  However, if you want to do things right,
it's probably a good idea to use a webserver capable of handling more than one
thread. You will also have to let the webserver serve the static files (CSS,
JavaScript) from the directory configured in ``PAPERLESS_STATICDIR``. For that,
you need to run ``./manage.py collectstatic`` in the ``src`` directory.  The
default static files directory is ``../static``.

Apache
~~~~~~

This is a configuration supplied by `steckerhalter`_ on GitHub.  It uses Apache
and mod_wsgi, with a Paperless installation in /home/paperless/:

.. code:: apache

    <VirtualHost *:80>
        ServerName example.com

        Alias /static/ /home/paperless/paperless/static/
        <Directory /home/paperless/paperless/static>
            Require all granted
        </Directory>

        WSGIScriptAlias / /home/paperless/paperless/src/paperless/wsgi.py
        WSGIDaemonProcess example.com user=paperless group=paperless threads=5 python-path=/home/paperless/paperless/src:/home/paperless/.env/lib/python3.4/site-packages
        WSGIProcessGroup example.com

        <Directory /home/paperless/paperless/src/paperless>
            <Files wsgi.py>
                Require all granted
            </Files>
        </Directory>
    </VirtualHost>

.. _steckerhalter: https://github.com/steckerhalter


Nginx + Gunicorn
~~~~~~~~~~~~~~~~

If you're using Nginx, the most common setup is to combine it with a
Python-based server like Gunicorn so that Nginx is acting as a proxy.  Below is
a copy of a simple Nginx configuration fragment making use of SSL and IPv6 to
refer to a gunicorn instance listening on a local Unix socket:

.. code:: nginx

    upstream transfer_server {
      server unix:/run/example.com/gunicorn.sock fail_timeout=0;
    }

    # Redirect requests on port 80 to 443
    server {
      listen 80;
      listen [::]:80;
      server_name example.com;
      rewrite ^ https://$server_name$request_uri? permanent;
    }

    server {

      listen 443 ssl;
      listen [::]:443;
      client_max_body_size 4G;
      server_name example.com;
      keepalive_timeout 5;
      root /var/www/example.com;

      ssl on;

      ssl_certificate         /etc/letsencrypt/live/example.com/fullchain.pem;
      ssl_certificate_key     /etc/letsencrypt/live/example.com/privkey.pem;
      ssl_trusted_certificate /etc/letsencrypt/live/example.com/fullchain.pem;
      ssl_session_timeout 1d;
      ssl_session_cache shared:SSL:50m;

      # Diffie-Hellman parameter for DHE ciphersuites, recommended 2048 bits
      # Generate with:
      #   openssl dhparam -out /etc/nginx/dhparam.pem 2048
      ssl_dhparam /etc/nginx/dhparam.pem;

      # What Mozilla calls "Intermediate configuration"
      # Copied from https://mozilla.github.io/server-side-tls/ssl-config-generator/
      ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
      ssl_ciphers 'ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS';
      ssl_prefer_server_ciphers on;

      add_header Strict-Transport-Security max-age=15768000;

      ssl_stapling on;
      ssl_stapling_verify on;

      access_log /var/log/nginx/example.com.log main;
      error_log /var/log/nginx/example.com.err info;

      location / {
        try_files $uri @proxy_to_app;
      }

      location @proxy_to_app {
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        proxy_set_header X-Forwarded-Proto https;
        proxy_set_header Host $host;
        proxy_redirect off;
        proxy_pass http://transfer_server;
      }

    }

Once you've got Nginx configured, you'll want to have a configuration file for
your gunicorn instance.  This should do the trick:

.. code:: python

    import os

    bind = 'unix:/run/example.com/gunicorn.sock'
    backlog = 2048
    workers = 6
    worker_class = 'sync'
    worker_connections = 1000
    timeout = 30
    keepalive = 2
    debug = False
    spew = False
    daemon = False
    pidfile = None
    umask = 0
    user = None
    group = None
    tmp_upload_dir = None
    errorlog = '/var/log/example.com/gunicorn.err'
    loglevel = 'warning'
    accesslog = '/var/log/example.com/gunicorn.log'
    proc_name = None

    def post_fork(server, worker):
        server.log.info("Worker spawned (pid: %s)", worker.pid)

    def pre_fork(server, worker):
        pass

    def pre_exec(server):
        server.log.info("Forked child, re-executing.")

    def when_ready(server):
        server.log.info("Server is ready. Spawning workers")

    def worker_int(worker):
        worker.log.info("worker received INT or QUIT signal")

        ## get traceback info
        import threading, sys, traceback
        id2name = dict([(th.ident, th.name) for th in threading.enumerate()])
        code = []
        for threadId, stack in sys._current_frames().items():
            code.append("\n# Thread: %s(%d)" % (id2name.get(threadId,""),
                threadId))
            for filename, lineno, name, line in traceback.extract_stack(stack):
                code.append('File: "%s", line %d, in %s' % (filename,
                    lineno, name))
                if line:
                    code.append("  %s" % (line.strip()))
        worker.log.debug("\n".join(code))

    def worker_abort(worker):
        worker.log.info("worker received SIGABRT signal")

Vagrant
.......

You may use the Ubuntu explanation above. Replace ``(local-filesystems and net-device-up IFACE=eth0)`` with ``vagrant-mounted``.

.. _setup-permanent-docker:

Docker
......

If you're using Docker, you can set a restart-policy_ in the
``docker-compose.yml`` to have the containers automatically start with the
Docker daemon.

.. _restart-policy: https://docs.docker.com/engine/reference/commandline/run/#restart-policies-restart


.. _setup-subdirectory

Hosting Paperless in a Subdirectory
-----------------------------------

Paperless was designed to run off the root of the hosting domain,
(ie: ``https://example.com/``) but with a few changes, you can configure
it to run in a subdirectory on your server
(ie: ``https://example.com/paperless/``).

Thanks to the efforts of `maphy-psd`_ on `Github`_, running Paperless in a
subdirectory is now as easy as setting a config variable.  Simply set
``PAPERLESS_FORCE_SCRIPT_NAME`` in your environment or
``/etc/paperless.conf`` to the path you want Paperless hosted at, configure
Nginx/Apache for your needs and you're done.  So, if you want Paperless to live
at ``https://example.com/arbitrary/path/to/paperless`` then you just set
``PAPERLESS_FORCE_SCRIPT_NAME`` to ``/arbitrary/path/to/paperless``.  Note the
leading ``/`` there.

As to how to configure Nginx or Apache for this, that's on you :-)

.. _maphy-psd: https://github.com/maphy-psd
.. _Github: https://github.com/danielquinn/paperless/pull/255
