Performance script, available as management command

[ci skip]

.codecov.yml

@@ -1,7 +1,6 @@
-# https://docs.codecov.com/docs/codecovyml-reference#codecov
 codecov:
   require_ci_to_pass: true
-# https://docs.codecov.com/docs/components
+  # https://docs.codecov.com/docs/components
 component_management:
   individual_components:
     - component_id: backend
@@ -10,70 +9,26 @@ component_management:
     - component_id: frontend
       paths:
         - src-ui/**
-# https://docs.codecov.com/docs/flags#step-2-flag-management-in-yaml
-# https://docs.codecov.com/docs/carryforward-flags
-flags:
-  # Backend Python versions
-  backend-python-3.10:
-    paths:
-      - src/**
-    carryforward: true
-  backend-python-3.11:
-    paths:
-      - src/**
-    carryforward: true
-  backend-python-3.12:
-    paths:
-      - src/**
-    carryforward: true
-  # Frontend (shards merge into single flag)
-  frontend-node-24.x:
-    paths:
-      - src-ui/**
-    carryforward: true
+# https://docs.codecov.com/docs/pull-request-comments
 comment:
   layout: "header, diff, components, flags, files"
+  # https://docs.codecov.com/docs/javascript-bundle-analysis
   require_bundle_changes: true
   bundle_change_threshold: "50Kb"
 coverage:
-  # https://docs.codecov.com/docs/commit-status
   status:
     project:
-      backend:
-        flags:
-          - backend-python-3.10
-          - backend-python-3.11
-          - backend-python-3.12
-        paths:
-          - src/**
+      default:
         # https://docs.codecov.com/docs/commit-status#threshold
         threshold: 1%
-        removed_code_behavior: adjust_base
-      frontend:
-        flags:
-          - frontend-node-24.x
-        paths:
-          - src-ui/**
-        threshold: 1%
-        removed_code_behavior: adjust_base
     patch:
-      backend:
-        flags:
-          - backend-python-3.10
-          - backend-python-3.11
-          - backend-python-3.12
-        paths:
-          - src/**
-        target: 100%
-        threshold: 25%
-      frontend:
-        flags:
-          - frontend-node-24.x
-        paths:
-          - src-ui/**
+      default:
+        # For the changed lines only, target 100% covered, but
+        # allow as low as 75%
         target: 100%
         threshold: 25%
 # https://docs.codecov.com/docs/javascript-bundle-analysis
 bundle_analysis:
+  # Fail if the bundle size increases by more than 1MB
   warning_threshold: "1MB"
   status: true

.devcontainer/Dockerfile

@@ -1,6 +1,6 @@
 # syntax=docker/dockerfile:1
 
-FROM --platform=$BUILDPLATFORM docker.io/node:24-trixie-slim as main-app
+FROM --platform=$BUILDPLATFORM docker.io/node:20-trixie-slim as main-app
 
 ARG DEBIAN_FRONTEND=noninteractive
 

.devcontainer/README.md

@@ -89,18 +89,6 @@ Additional tasks are available for common maintenance operations:
 - **Migrate Database**: To apply database migrations.
 - **Create Superuser**: To create an admin user for the application.
 
-## Committing from the Host Machine
-
-The DevContainer automatically installs pre-commit hooks during setup. However, these hooks are configured for use inside the container.
-
-If you want to commit changes from your host machine (outside the DevContainer), you need to set up pre-commit on your host. This installs it as a standalone tool.
-
-```bash
-uv tool install pre-commit && pre-commit install
-```
-
-After this, you can commit either from inside the DevContainer or from your host machine.
-
 ## Let's Get Started!
 
 Follow the steps above to get your development environment up and running. Happy coding!

.devcontainer/devcontainer.json

@@ -3,30 +3,26 @@
     "dockerComposeFile": "docker-compose.devcontainer.sqlite-tika.yml",
     "service": "paperless-development",
     "workspaceFolder": "/usr/src/paperless/paperless-ngx",
-    "containerEnv": {
-        "UV_CACHE_DIR": "/usr/src/paperless/paperless-ngx/.uv-cache"
-    },
-    "postCreateCommand": "/bin/bash -c 'rm -rf .venv/.* && uv sync --group dev && uv run pre-commit install'",
+    "postCreateCommand": "/bin/bash -c 'rm -rf .venv/.*  && uv sync --group dev && uv run pre-commit install'",
     "customizations": {
         "vscode": {
-            "extensions": [
-                "mhutchie.git-graph",
-                "ms-python.python",
-                "ms-vscode.js-debug-nightly",
-                "eamodio.gitlens",
-                "yzhang.markdown-all-in-one",
-                "pnpm.pnpm"
-            ],
-            "settings": {
-                "python.defaultInterpreterPath": "/usr/src/paperless/paperless-ngx/.venv/bin/python",
-                "python.pythonPath": "/usr/src/paperless/paperless-ngx/.venv/bin/python",
-                "python.terminal.activateEnvInCurrentTerminal": true,
-                "editor.formatOnPaste": false,
-                "editor.formatOnSave": true,
-                "editor.formatOnType": true,
-                "files.trimTrailingWhitespace": true
-            }
+          "extensions": [
+            "mhutchie.git-graph",
+            "ms-python.python",
+            "ms-vscode.js-debug-nightly",
+            "eamodio.gitlens",
+            "yzhang.markdown-all-in-one"
+          ],
+          "settings": {
+            "python.defaultInterpreterPath": "/usr/src/paperless/paperless-ngx/.venv/bin/python",
+            "python.pythonPath": "/usr/src/paperless/paperless-ngx/.venv/bin/python",
+            "python.terminal.activateEnvInCurrentTerminal": true,
+            "editor.formatOnPaste": false,
+            "editor.formatOnSave": true,
+            "editor.formatOnType": true,
+            "files.trimTrailingWhitespace": true
+          }
         }
-    },
-    "remoteUser": "paperless"
-}
+      },
+      "remoteUser": "paperless"
+    }

.devcontainer/vscode/tasks.json

@@ -174,22 +174,12 @@
 		{
 			"label": "Maintenance: Install Frontend Dependencies",
 			"description": "Install frontend (pnpm) dependencies",
-			"type": "shell",
-			"command": "pnpm install",
+			"type": "pnpm",
+			"script": "install",
+			"path": "src-ui",
 			"group": "clean",
 			"problemMatcher": [],
-			"options": {
-				"cwd": "${workspaceFolder}/src-ui"
-			},
-			"presentation": {
-				"echo": true,
-				"reveal": "always",
-				"focus": true,
-				"panel": "shared",
-				"showReuseMessage": false,
-				"clear": true,
-				"revealProblems": "onProblem"
-			}
+			"detail": "install dependencies from package"
 		},
 		{
 			"description": "Clean install frontend dependencies and build the frontend for production",

.github/workflows/ci-backend.yml

@@ -1,101 +0,0 @@
-name: Backend Tests
-on:
-  push:
-    branches-ignore:
-      - 'translations**'
-    paths:
-      - 'src/**'
-      - 'pyproject.toml'
-      - 'uv.lock'
-      - 'docker/compose/docker-compose.ci-test.yml'
-      - '.github/workflows/ci-backend.yml'
-  pull_request:
-    branches-ignore:
-      - 'translations**'
-    paths:
-      - 'src/**'
-      - 'pyproject.toml'
-      - 'uv.lock'
-      - 'docker/compose/docker-compose.ci-test.yml'
-      - '.github/workflows/ci-backend.yml'
-  workflow_dispatch:
-concurrency:
-  group: backend-${{ github.event.pull_request.number || github.ref }}
-  cancel-in-progress: true
-env:
-  DEFAULT_UV_VERSION: "0.9.x"
-  NLTK_DATA: "/usr/share/nltk_data"
-jobs:
-  test:
-    name: "Python ${{ matrix.python-version }}"
-    runs-on: ubuntu-24.04
-    strategy:
-      matrix:
-        python-version: ['3.10', '3.11', '3.12']
-      fail-fast: false
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v6
-      - name: Start containers
-        run: |
-          docker compose --file docker/compose/docker-compose.ci-test.yml pull --quiet
-          docker compose --file docker/compose/docker-compose.ci-test.yml up --detach
-      - name: Set up Python
-        id: setup-python
-        uses: actions/setup-python@v6
-        with:
-          python-version: "${{ matrix.python-version }}"
-      - name: Install uv
-        uses: astral-sh/setup-uv@v7
-        with:
-          version: ${{ env.DEFAULT_UV_VERSION }}
-          enable-cache: true
-          python-version: ${{ steps.setup-python.outputs.python-version }}
-      - name: Install system dependencies
-        run: |
-          sudo apt-get update -qq
-          sudo apt-get install -qq --no-install-recommends \
-            unpaper tesseract-ocr imagemagick ghostscript libzbar0 poppler-utils
-      - name: Configure ImageMagick
-        run: |
-          sudo cp docker/rootfs/etc/ImageMagick-6/paperless-policy.xml /etc/ImageMagick-6/policy.xml
-      - name: Install Python dependencies
-        run: |
-          uv sync \
-            --python ${{ steps.setup-python.outputs.python-version }} \
-            --group testing \
-            --frozen
-      - name: List installed Python dependencies
-        run: |
-          uv pip list
-      - name: Install NLTK data
-        run: |
-          uv run python -m nltk.downloader punkt punkt_tab snowball_data stopwords -d ${{ env.NLTK_DATA }}
-      - name: Run tests
-        env:
-          NLTK_DATA: ${{ env.NLTK_DATA }}
-          PAPERLESS_CI_TEST: 1
-        run: |
-          uv run \
-            --python ${{ steps.setup-python.outputs.python-version }} \
-            --dev \
-            --frozen \
-            pytest
-      - name: Upload test results to Codecov
-        if: always()
-        uses: codecov/codecov-action@v5
-        with:
-          flags: backend-python-${{ matrix.python-version }}
-          files: junit.xml
-          report_type: test_results
-      - name: Upload coverage to Codecov
-        uses: codecov/codecov-action@v5
-        with:
-          flags: backend-python-${{ matrix.python-version }}
-          files: coverage.xml
-          report_type: coverage
-      - name: Stop containers
-        if: always()
-        run: |
-          docker compose --file docker/compose/docker-compose.ci-test.yml logs
-          docker compose --file docker/compose/docker-compose.ci-test.yml down

.github/workflows/ci-docker.yml

@@ -1,252 +0,0 @@
-name: Docker Build
-on:
-  push:
-    tags:
-      - 'v[0-9]+.[0-9]+.[0-9]+'
-      - 'v[0-9]+.[0-9]+.[0-9]+-beta.rc[0-9]+'
-    branches:
-      - dev
-      - beta
-  pull_request:
-    branches:
-      - dev
-      - main
-  workflow_dispatch:
-concurrency:
-  group: docker-${{ github.event.pull_request.number || github.ref }}
-  cancel-in-progress: true
-env:
-  REGISTRY: ghcr.io
-jobs:
-  build-arch:
-    name: Build ${{ matrix.arch }}
-    strategy:
-      fail-fast: false
-      matrix:
-        include:
-          - runner: ubuntu-24.04
-            arch: amd64
-            platform: linux/amd64
-          - runner: ubuntu-24.04-arm
-            arch: arm64
-            platform: linux/arm64
-    runs-on: ${{ matrix.runner }}
-    permissions:
-      contents: read
-      packages: write
-    outputs:
-      should-push: ${{ steps.check-push.outputs.should-push }}
-      push-external: ${{ steps.check-push.outputs.push-external }}
-      repository: ${{ steps.repo.outputs.name }}
-      ref-name: ${{ steps.ref.outputs.name }}
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v6.0.1
-      - name: Determine ref name
-        id: ref
-        run: |
-          ref_name="${GITHUB_HEAD_REF:-$GITHUB_REF_NAME}"
-          # Sanitize by replacing / with - for use in tags and cache keys
-          sanitized_ref="${ref_name//\//-}"
-
-          echo "ref_name=${ref_name}"
-          echo "sanitized_ref=${sanitized_ref}"
-
-          echo "name=${sanitized_ref}" >> $GITHUB_OUTPUT
-      - name: Check push permissions
-        id: check-push
-        env:
-          REF_NAME: ${{ steps.ref.outputs.name }}
-        run: |
-          # should-push: Should we push to GHCR?
-          # True for:
-          #   1. Pushes (tags/dev/beta) - filtered via the workflow triggers
-          #   2. Manual dispatch - always push to GHCR
-          #   3. Internal PRs where the branch name starts with 'feature-' or 'fix-'
-
-          should_push="false"
-          if [[ "${{ github.event_name }}" == "push" ]]; then
-            should_push="true"
-          elif [[ "${{ github.event_name }}" == "workflow_dispatch" ]]; then
-            should_push="true"
-          elif [[ "${{ github.event_name }}" == "pull_request" && "${{ github.event.pull_request.head.repo.full_name }}" == "${{ github.repository }}" ]]; then
-            if [[ "${REF_NAME}" == feature-* || "${REF_NAME}" == fix-* ]]; then
-              should_push="true"
-            fi
-          fi
-
-          echo "should-push=${should_push}"
-          echo "should-push=${should_push}" >> $GITHUB_OUTPUT
-
-          # push-external: Should we also push to Docker Hub and Quay.io?
-          # Only for main repo on dev/beta branches or version tags
-          push_external="false"
-          if [[ "${should_push}" == "true" && "${{ github.repository_owner }}" == "paperless-ngx" ]]; then
-            case "${REF_NAME}" in
-              dev|beta)
-                push_external="true"
-                ;;
-            esac
-            case "${{ github.ref }}" in
-              refs/tags/v*|*beta.rc*)
-                push_external="true"
-                ;;
-            esac
-          fi
-          echo "push-external=${push_external}"
-          echo "push-external=${push_external}" >> $GITHUB_OUTPUT
-      - name: Set repository name
-        id: repo
-        run: |
-          repo_name="${{ github.repository }}"
-          repo_name="${repo_name,,}"
-
-          echo "repository=${repo_name}"
-          echo "name=${repo_name}" >> $GITHUB_OUTPUT
-      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3.12.0
-      - name: Login to GitHub Container Registry
-        uses: docker/login-action@v3.6.0
-        with:
-          registry: ${{ env.REGISTRY }}
-          username: ${{ github.actor }}
-          password: ${{ secrets.GITHUB_TOKEN }}
-      - name: Maximize space
-        run: |
-          sudo rm -rf /usr/share/dotnet
-          sudo rm -rf /opt/ghc
-          sudo rm -rf /usr/local/share/boost
-          sudo rm -rf "$AGENT_TOOLSDIRECTORY"
-      - name: Docker metadata
-        id: docker-meta
-        uses: docker/metadata-action@v5.10.0
-        with:
-          images: |
-            ${{ env.REGISTRY }}/${{ steps.repo.outputs.name }}
-          tags: |
-            type=ref,event=branch
-            type=raw,value=${{ steps.ref.outputs.name }},enable=${{ github.event_name == 'pull_request' }}
-            type=semver,pattern={{version}}
-            type=semver,pattern={{major}}.{{minor}}
-      - name: Build and push by digest
-        id: build
-        uses: docker/build-push-action@v6.18.0
-        with:
-          context: .
-          file: ./Dockerfile
-          platforms: ${{ matrix.platform }}
-          labels: ${{ steps.docker-meta.outputs.labels }}
-          build-args: |
-            PNGX_TAG_VERSION=${{ steps.docker-meta.outputs.version }}
-          outputs: type=image,name=${{ env.REGISTRY }}/${{ steps.repo.outputs.name }},push-by-digest=true,name-canonical=true,push=${{ steps.check-push.outputs.should-push }}
-          cache-from: |
-            type=registry,ref=${{ env.REGISTRY }}/${{ steps.repo.outputs.name }}/cache/app:${{ steps.ref.outputs.name }}-${{ matrix.arch }}
-            type=registry,ref=${{ env.REGISTRY }}/${{ steps.repo.outputs.name }}/cache/app:dev-${{ matrix.arch }}
-          cache-to: ${{ steps.check-push.outputs.should-push == 'true' && format('type=registry,mode=max,ref={0}/{1}/cache/app:{2}-{3}', env.REGISTRY, steps.repo.outputs.name, steps.ref.outputs.name, matrix.arch) || '' }}
-      - name: Export digest
-        if: steps.check-push.outputs.should-push == 'true'
-        run: |
-          mkdir -p /tmp/digests
-          digest="${{ steps.build.outputs.digest }}"
-          echo "digest=${digest}"
-          touch "/tmp/digests/${digest#sha256:}"
-      - name: Upload digest
-        if: steps.check-push.outputs.should-push == 'true'
-        uses: actions/upload-artifact@v6.0.0
-        with:
-          name: digests-${{ matrix.arch }}
-          path: /tmp/digests/*
-          if-no-files-found: error
-          retention-days: 1
-  merge-and-push:
-    name: Merge and Push Manifest
-    runs-on: ubuntu-24.04
-    needs: build-arch
-    if: needs.build-arch.outputs.should-push == 'true'
-    permissions:
-      contents: read
-      packages: write
-    steps:
-      - name: Download digests
-        uses: actions/download-artifact@v7.0.0
-        with:
-          path: /tmp/digests
-          pattern: digests-*
-          merge-multiple: true
-      - name: List digests
-        run: |
-          echo "Downloaded digests:"
-          ls -la /tmp/digests/
-      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3.12.0
-      - name: Login to GitHub Container Registry
-        uses: docker/login-action@v3.6.0
-        with:
-          registry: ${{ env.REGISTRY }}
-          username: ${{ github.actor }}
-          password: ${{ secrets.GITHUB_TOKEN }}
-      - name: Login to Docker Hub
-        if: needs.build-arch.outputs.push-external == 'true'
-        uses: docker/login-action@v3.6.0
-        with:
-          username: ${{ secrets.DOCKERHUB_USERNAME }}
-          password: ${{ secrets.DOCKERHUB_TOKEN }}
-      - name: Login to Quay.io
-        if: needs.build-arch.outputs.push-external == 'true'
-        uses: docker/login-action@v3.6.0
-        with:
-          registry: quay.io
-          username: ${{ secrets.QUAY_USERNAME }}
-          password: ${{ secrets.QUAY_ROBOT_TOKEN }}
-      - name: Docker metadata
-        id: docker-meta
-        uses: docker/metadata-action@v5.10.0
-        with:
-          images: |
-            ${{ env.REGISTRY }}/${{ needs.build-arch.outputs.repository }}
-          tags: |
-            type=ref,event=branch
-            type=raw,value=${{ needs.build-arch.outputs.ref-name }},enable=${{ github.event_name == 'pull_request' }}
-            type=semver,pattern={{version}}
-            type=semver,pattern={{major}}.{{minor}}
-      - name: Create manifest list and push
-        working-directory: /tmp/digests
-        env:
-          REPOSITORY: ${{ needs.build-arch.outputs.repository }}
-        run: |
-          tags=$(jq -cr '.tags | map("-t " + .) | join(" ")' <<< "${DOCKER_METADATA_OUTPUT_JSON}")
-
-          digests=""
-          for digest in *; do
-            digests+="${{ env.REGISTRY }}/${REPOSITORY}@sha256:${digest} "
-          done
-
-          echo "Creating manifest with tags: ${tags}"
-          echo "From digests: ${digests}"
-
-          docker buildx imagetools create ${tags} ${digests}
-      - name: Inspect image
-        run: |
-          docker buildx imagetools inspect ${{ fromJSON(steps.docker-meta.outputs.json).tags[0] }}
-      - name: Copy to Docker Hub
-        if: needs.build-arch.outputs.push-external == 'true'
-        env:
-          TAGS: ${{ steps.docker-meta.outputs.tags }}
-          GHCR_REPO: ${{ env.REGISTRY }}/${{ needs.build-arch.outputs.repository }}
-        run: |
-          for tag in ${TAGS}; do
-            dockerhub_tag="${tag/${GHCR_REPO}/docker.io/paperlessngx/paperless-ngx}"
-            echo "Copying ${tag} to ${dockerhub_tag}"
-            skopeo copy --all "docker://${tag}" "docker://${dockerhub_tag}"
-          done
-      - name: Copy to Quay.io
-        if: needs.build-arch.outputs.push-external == 'true'
-        env:
-          TAGS: ${{ steps.docker-meta.outputs.tags }}
-          GHCR_REPO: ${{ env.REGISTRY }}/${{ needs.build-arch.outputs.repository }}
-        run: |
-          for tag in ${TAGS}; do
-            quay_tag="${tag/${GHCR_REPO}/quay.io/paperlessngx/paperless-ngx}"
-            echo "Copying ${tag} to ${quay_tag}"
-            skopeo copy --all "docker://${tag}" "docker://${quay_tag}"
-          done

.github/workflows/ci-docs.yml

@@ -1,88 +0,0 @@
-name: Documentation
-on:
-  push:
-    branches:
-      - main
-      - dev
-    paths:
-      - 'docs/**'
-      - 'mkdocs.yml'
-      - '.github/workflows/ci-docs.yml'
-  pull_request:
-    paths:
-      - 'docs/**'
-      - 'mkdocs.yml'
-      - '.github/workflows/ci-docs.yml'
-  workflow_dispatch:
-concurrency:
-  group: docs-${{ github.event.pull_request.number || github.ref }}
-  cancel-in-progress: true
-env:
-  DEFAULT_UV_VERSION: "0.9.x"
-  DEFAULT_PYTHON_VERSION: "3.11"
-jobs:
-  build:
-    name: Build Documentation
-    runs-on: ubuntu-24.04
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v6
-      - name: Set up Python
-        id: setup-python
-        uses: actions/setup-python@v6
-        with:
-          python-version: ${{ env.DEFAULT_PYTHON_VERSION }}
-      - name: Install uv
-        uses: astral-sh/setup-uv@v7
-        with:
-          version: ${{ env.DEFAULT_UV_VERSION }}
-          enable-cache: true
-          python-version: ${{ env.DEFAULT_PYTHON_VERSION }}
-      - name: Install Python dependencies
-        run: |
-          uv sync --python ${{ steps.setup-python.outputs.python-version }} --dev --frozen
-      - name: Build documentation
-        run: |
-          uv run \
-            --python ${{ steps.setup-python.outputs.python-version }} \
-            --dev \
-            --frozen \
-            mkdocs build --config-file ./mkdocs.yml
-      - name: Upload artifact
-        uses: actions/upload-artifact@v6
-        with:
-          name: documentation
-          path: site/
-          retention-days: 7
-  deploy:
-    name: Deploy Documentation
-    needs: build
-    if: github.event_name == 'push' && github.ref == 'refs/heads/main'
-    runs-on: ubuntu-24.04
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v6
-      - name: Set up Python
-        id: setup-python
-        uses: actions/setup-python@v6
-        with:
-          python-version: ${{ env.DEFAULT_PYTHON_VERSION }}
-      - name: Install uv
-        uses: astral-sh/setup-uv@v7
-        with:
-          version: ${{ env.DEFAULT_UV_VERSION }}
-          enable-cache: true
-          python-version: ${{ env.DEFAULT_PYTHON_VERSION }}
-      - name: Install Python dependencies
-        run: |
-          uv sync --python ${{ steps.setup-python.outputs.python-version }} --dev --frozen
-      - name: Deploy documentation
-        run: |
-          echo "docs.paperless-ngx.com" > "${{ github.workspace }}/docs/CNAME"
-          git config --global user.name "${{ github.actor }}"
-          git config --global user.email "${{ github.actor }}@users.noreply.github.com"
-          uv run \
-            --python ${{ steps.setup-python.outputs.python-version }} \
-            --dev \
-            --frozen \
-            mkdocs gh-deploy --force --no-history

.github/workflows/ci-frontend.yml

@@ -1,189 +0,0 @@
-name: Frontend Tests
-on:
-  push:
-    branches-ignore:
-      - 'translations**'
-    paths:
-      - 'src-ui/**'
-      - '.github/workflows/ci-frontend.yml'
-  pull_request:
-    branches-ignore:
-      - 'translations**'
-    paths:
-      - 'src-ui/**'
-      - '.github/workflows/ci-frontend.yml'
-  workflow_dispatch:
-concurrency:
-  group: frontend-${{ github.event.pull_request.number || github.ref }}
-  cancel-in-progress: true
-jobs:
-  install-dependencies:
-    name: Install Dependencies
-    runs-on: ubuntu-24.04
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v6
-      - name: Install pnpm
-        uses: pnpm/action-setup@v4
-        with:
-          version: 10
-      - name: Use Node.js 24
-        uses: actions/setup-node@v6
-        with:
-          node-version: 24.x
-          cache: 'pnpm'
-          cache-dependency-path: 'src-ui/pnpm-lock.yaml'
-      - name: Cache frontend dependencies
-        id: cache-frontend-deps
-        uses: actions/cache@v5
-        with:
-          path: |
-            ~/.pnpm-store
-            ~/.cache
-          key: ${{ runner.os }}-frontend-${{ hashFiles('src-ui/pnpm-lock.yaml') }}
-      - name: Install dependencies
-        run: cd src-ui && pnpm install
-  lint:
-    name: Lint
-    needs: install-dependencies
-    runs-on: ubuntu-24.04
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v6
-      - name: Install pnpm
-        uses: pnpm/action-setup@v4
-        with:
-          version: 10
-      - name: Use Node.js 24
-        uses: actions/setup-node@v6
-        with:
-          node-version: 24.x
-          cache: 'pnpm'
-          cache-dependency-path: 'src-ui/pnpm-lock.yaml'
-      - name: Cache frontend dependencies
-        uses: actions/cache@v5
-        with:
-          path: |
-            ~/.pnpm-store
-            ~/.cache
-          key: ${{ runner.os }}-frontend-${{ hashFiles('src-ui/pnpm-lock.yaml') }}
-      - name: Re-link Angular CLI
-        run: cd src-ui && pnpm link @angular/cli
-      - name: Run lint
-        run: cd src-ui && pnpm run lint
-  unit-tests:
-    name: "Unit Tests (${{ matrix.shard-index }}/${{ matrix.shard-count }})"
-    needs: install-dependencies
-    runs-on: ubuntu-24.04
-    strategy:
-      fail-fast: false
-      matrix:
-        node-version: [24.x]
-        shard-index: [1, 2, 3, 4]
-        shard-count: [4]
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v6
-      - name: Install pnpm
-        uses: pnpm/action-setup@v4
-        with:
-          version: 10
-      - name: Use Node.js 24
-        uses: actions/setup-node@v6
-        with:
-          node-version: 24.x
-          cache: 'pnpm'
-          cache-dependency-path: 'src-ui/pnpm-lock.yaml'
-      - name: Cache frontend dependencies
-        uses: actions/cache@v5
-        with:
-          path: |
-            ~/.pnpm-store
-            ~/.cache
-          key: ${{ runner.os }}-frontend-${{ hashFiles('src-ui/pnpm-lock.yaml') }}
-      - name: Re-link Angular CLI
-        run: cd src-ui && pnpm link @angular/cli
-      - name: Run Jest unit tests
-        run: cd src-ui && pnpm run test --max-workers=2 --shard=${{ matrix.shard-index }}/${{ matrix.shard-count }}
-      - name: Upload test results to Codecov
-        if: always()
-        uses: codecov/codecov-action@v5
-        with:
-          flags: frontend-node-${{ matrix.node-version }}
-          directory: src-ui/
-          report_type: test_results
-      - name: Upload coverage to Codecov
-        uses: codecov/codecov-action@v5
-        with:
-          flags: frontend-node-${{ matrix.node-version }}
-          directory: src-ui/coverage/
-  e2e-tests:
-    name: "E2E Tests (${{ matrix.shard-index }}/${{ matrix.shard-count }})"
-    needs: install-dependencies
-    runs-on: ubuntu-24.04
-    container: mcr.microsoft.com/playwright:v1.57.0-noble
-    env:
-      PLAYWRIGHT_BROWSERS_PATH: /ms-playwright
-      PLAYWRIGHT_SKIP_BROWSER_DOWNLOAD: 1
-    strategy:
-      fail-fast: false
-      matrix:
-        node-version: [24.x]
-        shard-index: [1, 2]
-        shard-count: [2]
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v6
-      - name: Install pnpm
-        uses: pnpm/action-setup@v4
-        with:
-          version: 10
-      - name: Use Node.js 24
-        uses: actions/setup-node@v6
-        with:
-          node-version: 24.x
-          cache: 'pnpm'
-          cache-dependency-path: 'src-ui/pnpm-lock.yaml'
-      - name: Cache frontend dependencies
-        uses: actions/cache@v5
-        with:
-          path: |
-            ~/.pnpm-store
-            ~/.cache
-          key: ${{ runner.os }}-frontend-${{ hashFiles('src-ui/pnpm-lock.yaml') }}
-      - name: Re-link Angular CLI
-        run: cd src-ui && pnpm link @angular/cli
-      - name: Install dependencies
-        run: cd src-ui && pnpm install --no-frozen-lockfile
-      - name: Run Playwright E2E tests
-        run: cd src-ui && pnpm exec playwright test --shard ${{ matrix.shard-index }}/${{ matrix.shard-count }}
-  bundle-analysis:
-    name: Bundle Analysis
-    needs: [unit-tests, e2e-tests]
-    runs-on: ubuntu-24.04
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v6
-      - name: Install pnpm
-        uses: pnpm/action-setup@v4
-        with:
-          version: 10
-      - name: Use Node.js 24
-        uses: actions/setup-node@v6
-        with:
-          node-version: 24.x
-          cache: 'pnpm'
-          cache-dependency-path: 'src-ui/pnpm-lock.yaml'
-      - name: Cache frontend dependencies
-        uses: actions/cache@v5
-        with:
-          path: |
-            ~/.pnpm-store
-            ~/.cache
-          key: ${{ runner.os }}-frontend-${{ hashFiles('src-ui/pnpm-lock.yaml') }}
-      - name: Re-link Angular CLI
-        run: cd src-ui && pnpm link @angular/cli
-      - name: Build and analyze
-        env:
-          CODECOV_TOKEN: ${{ secrets.CODECOV_TOKEN }}
-        run: cd src-ui && pnpm run build --configuration=production

.github/workflows/ci-lint.yml

@@ -1,24 +0,0 @@
-name: Lint
-on:
-  push:
-    branches-ignore:
-      - 'translations**'
-  pull_request:
-    branches-ignore:
-      - 'translations**'
-concurrency:
-  group: lint-${{ github.event.pull_request.number || github.ref }}
-  cancel-in-progress: true
-jobs:
-  pre-commit:
-    name: Pre-commit Checks
-    runs-on: ubuntu-24.04
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v6
-      - name: Install Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: "3.11"
-      - name: Run pre-commit
-        uses: pre-commit/action@v3.0.1

.github/workflows/ci-release.yml

@@ -1,237 +0,0 @@
-name: Release
-on:
-  push:
-    tags:
-      - 'v[0-9]+.[0-9]+.[0-9]+'
-      - 'v[0-9]+.[0-9]+.[0-9]+-beta.rc[0-9]+'
-concurrency:
-  group: release-${{ github.ref }}
-  cancel-in-progress: false
-env:
-  DEFAULT_UV_VERSION: "0.9.x"
-  DEFAULT_PYTHON_VERSION: "3.11"
-jobs:
-  wait-for-docker:
-    name: Wait for Docker Build
-    runs-on: ubuntu-24.04
-    steps:
-      - name: Wait for Docker build
-        uses: lewagon/wait-on-check-action@v1.4.1
-        with:
-          ref: ${{ github.sha }}
-          check-name: 'Build Docker Image'
-          repo-token: ${{ secrets.GITHUB_TOKEN }}
-          wait-interval: 60
-  build-release:
-    name: Build Release
-    needs: wait-for-docker
-    runs-on: ubuntu-24.04
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v6
-      # ---- Frontend Build ----
-      - name: Install pnpm
-        uses: pnpm/action-setup@v4
-        with:
-          version: 10
-      - name: Use Node.js 24
-        uses: actions/setup-node@v6
-        with:
-          node-version: 24.x
-          cache: 'pnpm'
-          cache-dependency-path: 'src-ui/pnpm-lock.yaml'
-      - name: Install frontend dependencies
-        run: cd src-ui && pnpm install
-      - name: Build frontend
-        run: cd src-ui && pnpm run build --configuration production
-      # ---- Backend Setup ----
-      - name: Set up Python
-        id: setup-python
-        uses: actions/setup-python@v6
-        with:
-          python-version: ${{ env.DEFAULT_PYTHON_VERSION }}
-      - name: Install uv
-        uses: astral-sh/setup-uv@v7
-        with:
-          version: ${{ env.DEFAULT_UV_VERSION }}
-          enable-cache: true
-          python-version: ${{ steps.setup-python.outputs.python-version }}
-      - name: Install Python dependencies
-        run: |
-          uv sync --python ${{ steps.setup-python.outputs.python-version }} --dev --frozen
-      - name: Install system dependencies
-        run: |
-          sudo apt-get update -qq
-          sudo apt-get install -qq --no-install-recommends gettext liblept5
-      # ---- Build Documentation ----
-      - name: Build documentation
-        run: |
-          uv run \
-            --python ${{ steps.setup-python.outputs.python-version }} \
-            --dev \
-            --frozen \
-            mkdocs build --config-file ./mkdocs.yml
-      # ---- Prepare Release ----
-      - name: Generate requirements file
-        run: |
-          uv export --quiet --no-dev --all-extras --format requirements-txt --output-file requirements.txt
-      - name: Compile messages
-        run: |
-          cd src/
-          uv run \
-            --python ${{ steps.setup-python.outputs.python-version }} \
-            manage.py compilemessages
-      - name: Collect static files
-        run: |
-          cd src/
-          uv run \
-            --python ${{ steps.setup-python.outputs.python-version }} \
-            manage.py collectstatic --no-input --clear
-      - name: Assemble release package
-        run: |
-          mkdir -p dist/paperless-ngx/scripts
-
-          for file_name in .dockerignore \
-                          .env \
-                          Dockerfile \
-                          pyproject.toml \
-                          uv.lock \
-                          requirements.txt \
-                          LICENSE \
-                          README.md \
-                          paperless.conf.example
-          do
-            cp --verbose ${file_name} dist/paperless-ngx/
-          done
-          mv dist/paperless-ngx/paperless.conf.example dist/paperless-ngx/paperless.conf
-
-          cp --recursive docker/ dist/paperless-ngx/docker
-          cp scripts/*.service scripts/*.sh scripts/*.socket dist/paperless-ngx/scripts/
-          cp --recursive src/ dist/paperless-ngx/src
-          cp --recursive site/ dist/paperless-ngx/docs
-          mv static dist/paperless-ngx/
-
-          find dist/paperless-ngx -name "__pycache__" -type d -exec rm -rf {} +
-      - name: Create release archive
-        run: |
-          cd dist
-          sudo chown -R 1000:1000 paperless-ngx/
-          tar -cJf paperless-ngx.tar.xz paperless-ngx/
-      - name: Upload release artifact
-        uses: actions/upload-artifact@v6
-        with:
-          name: release
-          path: dist/paperless-ngx.tar.xz
-          retention-days: 7
-  publish-release:
-    name: Publish Release
-    needs: build-release
-    runs-on: ubuntu-24.04
-    outputs:
-      prerelease: ${{ steps.get-version.outputs.prerelease }}
-      changelog: ${{ steps.create-release.outputs.body }}
-      version: ${{ steps.get-version.outputs.version }}
-    steps:
-      - name: Download release artifact
-        uses: actions/download-artifact@v7
-        with:
-          name: release
-          path: ./
-      - name: Get version info
-        id: get-version
-        run: |
-          echo "version=${{ github.ref_name }}" >> $GITHUB_OUTPUT
-          if [[ "${{ github.ref_name }}" == *"-beta.rc"* ]]; then
-            echo "prerelease=true" >> $GITHUB_OUTPUT
-          else
-            echo "prerelease=false" >> $GITHUB_OUTPUT
-          fi
-      - name: Create release and changelog
-        id: create-release
-        uses: release-drafter/release-drafter@v6
-        with:
-          name: Paperless-ngx ${{ steps.get-version.outputs.version }}
-          tag: ${{ steps.get-version.outputs.version }}
-          version: ${{ steps.get-version.outputs.version }}
-          prerelease: ${{ steps.get-version.outputs.prerelease }}
-          publish: true
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-      - name: Upload release archive
-        uses: shogo82148/actions-upload-release-asset@v1
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          upload_url: ${{ steps.create-release.outputs.upload_url }}
-          asset_path: ./paperless-ngx.tar.xz
-          asset_name: paperless-ngx-${{ steps.get-version.outputs.version }}.tar.xz
-          asset_content_type: application/x-xz
-  # ---------------------------------------------------------------------------
-  # Append changelog to docs (only on non-prerelease)
-  # ---------------------------------------------------------------------------
-  append-changelog:
-    name: Append Changelog
-    needs: publish-release
-    if: needs.publish-release.outputs.prerelease == 'false'
-    runs-on: ubuntu-24.04
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v6
-        with:
-          ref: main
-      - name: Set up Python
-        id: setup-python
-        uses: actions/setup-python@v6
-        with:
-          python-version: ${{ env.DEFAULT_PYTHON_VERSION }}
-      - name: Install uv
-        uses: astral-sh/setup-uv@v7
-        with:
-          version: ${{ env.DEFAULT_UV_VERSION }}
-          enable-cache: true
-          python-version: ${{ env.DEFAULT_PYTHON_VERSION }}
-      - name: Update changelog
-        working-directory: docs
-        run: |
-          git branch ${{ needs.publish-release.outputs.version }}-changelog
-          git checkout ${{ needs.publish-release.outputs.version }}-changelog
-
-          echo -e "# Changelog\n\n${{ needs.publish-release.outputs.changelog }}\n" > changelog-new.md
-
-          echo "Manually linking usernames"
-          sed -i -r 's|@([a-zA-Z0-9_]+) \(\[#|[@\1](https://github.com/\1) ([#|g' changelog-new.md
-
-          echo "Removing unneeded comment tags"
-          sed -i -r 's|@<!---->|@|g' changelog-new.md
-
-          CURRENT_CHANGELOG=$(tail --lines +2 changelog.md)
-          echo -e "$CURRENT_CHANGELOG" >> changelog-new.md
-          mv changelog-new.md changelog.md
-
-          uv run \
-            --python ${{ steps.setup-python.outputs.python-version }} \
-            --dev \
-            pre-commit run --files changelog.md || true
-
-          git config --global user.name "github-actions"
-          git config --global user.email "41898282+github-actions[bot]@users.noreply.github.com"
-          git commit -am "Changelog ${{ needs.publish-release.outputs.version }} - GHA"
-          git push origin ${{ needs.publish-release.outputs.version }}-changelog
-      - name: Create pull request
-        uses: actions/github-script@v8
-        with:
-          script: |
-            const { repo, owner } = context.repo;
-            const result = await github.rest.pulls.create({
-              title: 'Documentation: Add ${{ needs.publish-release.outputs.version }} changelog',
-              owner,
-              repo,
-              head: '${{ needs.publish-release.outputs.version }}-changelog',
-              base: 'main',
-              body: 'This PR is auto-generated by CI.'
-            });
-            github.rest.issues.addLabels({
-              owner,
-              repo,
-              issue_number: result.data.number,
-              labels: ['documentation', 'skip-changelog']
-            });

.github/workflows/ci.yml

@@ -0,0 +1,694 @@
+name: ci
+on:
+  push:
+    tags:
+      # https://semver.org/#spec-item-2
+      - 'v[0-9]+.[0-9]+.[0-9]+'
+      # https://semver.org/#spec-item-9
+      - 'v[0-9]+.[0-9]+.[0-9]+-beta.rc[0-9]+'
+    branches-ignore:
+      - 'translations**'
+  pull_request:
+    branches-ignore:
+      - 'translations**'
+env:
+  DEFAULT_UV_VERSION: "0.9.x"
+  # This is the default version of Python to use in most steps which aren't specific
+  DEFAULT_PYTHON_VERSION: "3.11"
+  NLTK_DATA: "/usr/share/nltk_data"
+jobs:
+  detect-duplicate:
+    name: Detect Duplicate Run
+    runs-on: ubuntu-24.04
+    outputs:
+      should_run: ${{ steps.check.outputs.should_run }}
+    steps:
+      - name: Check if workflow should run
+        id: check
+        uses: actions/github-script@v8
+        with:
+          github-token: ${{ secrets.GITHUB_TOKEN }}
+          script: |
+            if (context.eventName !== 'push') {
+              core.info('Not a push event; running workflow.');
+              core.setOutput('should_run', 'true');
+              return;
+            }
+
+            const ref = context.ref || '';
+            if (!ref.startsWith('refs/heads/')) {
+              core.info('Push is not to a branch; running workflow.');
+              core.setOutput('should_run', 'true');
+              return;
+            }
+
+            const branch = ref.substring('refs/heads/'.length);
+            const { owner, repo } = context.repo;
+            const prs = await github.paginate(github.rest.pulls.list, {
+              owner,
+              repo,
+              state: 'open',
+              head: `${owner}:${branch}`,
+              per_page: 100,
+            });
+
+            if (prs.length === 0) {
+              core.info(`No open PR found for ${branch}; running workflow.`);
+              core.setOutput('should_run', 'true');
+            } else {
+              core.info(`Found ${prs.length} open PR(s) for ${branch}; skipping duplicate push run.`);
+              core.setOutput('should_run', 'false');
+            }
+  pre-commit:
+    needs:
+      - detect-duplicate
+    if: needs.detect-duplicate.outputs.should_run == 'true'
+    name: Linting Checks
+    runs-on: ubuntu-24.04
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@v6
+      - name: Install python
+        uses: actions/setup-python@v6
+        with:
+          python-version: ${{ env.DEFAULT_PYTHON_VERSION }}
+      - name: Check files
+        uses: pre-commit/action@v3.0.1
+  documentation:
+    name: "Build & Deploy Documentation"
+    runs-on: ubuntu-24.04
+    needs:
+      - pre-commit
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v6
+      - name: Set up Python
+        id: setup-python
+        uses: actions/setup-python@v6
+        with:
+          python-version: ${{ env.DEFAULT_PYTHON_VERSION }}
+      - name: Install uv
+        uses: astral-sh/setup-uv@v7
+        with:
+          version: ${{ env.DEFAULT_UV_VERSION }}
+          enable-cache: true
+          python-version: ${{ env.DEFAULT_PYTHON_VERSION }}
+      - name: Install Python dependencies
+        run: |
+          uv sync --python ${{ steps.setup-python.outputs.python-version }} --dev --frozen
+      - name: Make documentation
+        run: |
+          uv run \
+            --python ${{ steps.setup-python.outputs.python-version }} \
+            --dev \
+            --frozen \
+            mkdocs build --config-file ./mkdocs.yml
+      - name: Deploy documentation
+        if: github.event_name == 'push' && github.ref == 'refs/heads/main'
+        run: |
+          echo "docs.paperless-ngx.com" > "${{ github.workspace }}/docs/CNAME"
+          git config --global user.name "${{ github.actor }}"
+          git config --global user.email "${{ github.actor }}@users.noreply.github.com"
+          uv run \
+            --python ${{ steps.setup-python.outputs.python-version }} \
+            --dev \
+            --frozen \
+            mkdocs gh-deploy --force --no-history
+      - name: Upload artifact
+        uses: actions/upload-artifact@v5
+        with:
+          name: documentation
+          path: site/
+          retention-days: 7
+  tests-backend:
+    name: "Backend Tests (Python ${{ matrix.python-version }})"
+    runs-on: ubuntu-24.04
+    needs:
+      - pre-commit
+    strategy:
+      matrix:
+        python-version: ['3.10', '3.11', '3.12']
+      fail-fast: false
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v6
+      - name: Start containers
+        run: |
+          docker compose --file ${{ github.workspace }}/docker/compose/docker-compose.ci-test.yml pull --quiet
+          docker compose --file ${{ github.workspace }}/docker/compose/docker-compose.ci-test.yml up --detach
+      - name: Set up Python
+        id: setup-python
+        uses: actions/setup-python@v6
+        with:
+          python-version: "${{ matrix.python-version }}"
+      - name: Install uv
+        uses: astral-sh/setup-uv@v7
+        with:
+          version: ${{ env.DEFAULT_UV_VERSION }}
+          enable-cache: true
+          python-version: ${{ steps.setup-python.outputs.python-version }}
+      - name: Install system dependencies
+        run: |
+          sudo apt-get update -qq
+          sudo apt-get install -qq --no-install-recommends unpaper tesseract-ocr imagemagick ghostscript libzbar0 poppler-utils
+      - name: Configure ImageMagick
+        run: |
+          sudo cp docker/rootfs/etc/ImageMagick-6/paperless-policy.xml /etc/ImageMagick-6/policy.xml
+      - name: Install Python dependencies
+        run: |
+          uv sync \
+            --python ${{ steps.setup-python.outputs.python-version }} \
+            --group testing \
+            --frozen
+      - name: List installed Python dependencies
+        run: |
+          uv pip list
+      - name: Install or update NLTK dependencies
+        run: uv run python -m nltk.downloader punkt punkt_tab snowball_data stopwords -d ${{ env.NLTK_DATA }}
+      - name: Tests
+        env:
+          NLTK_DATA: ${{ env.NLTK_DATA }}
+          PAPERLESS_CI_TEST: 1
+          # Enable paperless_mail testing against real server
+          PAPERLESS_MAIL_TEST_HOST: ${{ secrets.TEST_MAIL_HOST }}
+          PAPERLESS_MAIL_TEST_USER: ${{ secrets.TEST_MAIL_USER }}
+          PAPERLESS_MAIL_TEST_PASSWD: ${{ secrets.TEST_MAIL_PASSWD }}
+        run: |
+          uv run \
+            --python ${{ steps.setup-python.outputs.python-version }} \
+            --dev \
+            --frozen \
+            pytest
+      - name: Upload backend test results to Codecov
+        if: always()
+        uses: codecov/codecov-action@v5
+        with:
+          flags: backend-python-${{ matrix.python-version }}
+          files: junit.xml
+          report_type: test_results
+      - name: Upload backend coverage to Codecov
+        uses: codecov/codecov-action@v5
+        with:
+          flags: backend-python-${{ matrix.python-version }}
+          files: coverage.xml
+      - name: Stop containers
+        if: always()
+        run: |
+          docker compose --file ${{ github.workspace }}/docker/compose/docker-compose.ci-test.yml logs
+          docker compose --file ${{ github.workspace }}/docker/compose/docker-compose.ci-test.yml down
+  install-frontend-dependencies:
+    name: "Install Frontend Dependencies"
+    runs-on: ubuntu-24.04
+    needs:
+      - pre-commit
+    steps:
+      - uses: actions/checkout@v6
+      - name: Install pnpm
+        uses: pnpm/action-setup@v4
+        with:
+          version: 10
+      - name: Use Node.js 20
+        uses: actions/setup-node@v6
+        with:
+          node-version: 20.x
+          cache: 'pnpm'
+          cache-dependency-path: 'src-ui/pnpm-lock.yaml'
+      - name: Cache frontend dependencies
+        id: cache-frontend-deps
+        uses: actions/cache@v4
+        with:
+          path: |
+            ~/.pnpm-store
+            ~/.cache
+          key: ${{ runner.os }}-frontenddeps-${{ hashFiles('src-ui/pnpm-lock.yaml') }}
+      - name: Install dependencies
+        run: cd src-ui && pnpm install
+  tests-frontend:
+    name: "Frontend Unit Tests (Node ${{ matrix.node-version }} - ${{ matrix.shard-index }}/${{ matrix.shard-count }})"
+    runs-on: ubuntu-24.04
+    needs:
+      - install-frontend-dependencies
+    strategy:
+      fail-fast: false
+      matrix:
+        node-version: [20.x]
+        shard-index: [1, 2, 3, 4]
+        shard-count: [4]
+    steps:
+      - uses: actions/checkout@v6
+      - name: Install pnpm
+        uses: pnpm/action-setup@v4
+        with:
+          version: 10
+      - name: Use Node.js 20
+        uses: actions/setup-node@v6
+        with:
+          node-version: 20.x
+          cache: 'pnpm'
+          cache-dependency-path: 'src-ui/pnpm-lock.yaml'
+      - name: Cache frontend dependencies
+        id: cache-frontend-deps
+        uses: actions/cache@v4
+        with:
+          path: |
+            ~/.pnpm-store
+            ~/.cache
+          key: ${{ runner.os }}-frontenddeps-${{ hashFiles('src-ui/pnpm-lock.yaml') }}
+      - name: Re-link Angular cli
+        run: cd src-ui && pnpm link @angular/cli
+      - name: Linting checks
+        run: cd src-ui && pnpm run lint
+      - name: Run Jest unit tests
+        run: cd src-ui && pnpm run test --max-workers=2 --shard=${{ matrix.shard-index }}/${{ matrix.shard-count }}
+      - name: Upload frontend test results to Codecov
+        if: always()
+        uses: codecov/codecov-action@v5
+        with:
+          flags: frontend-node-${{ matrix.node-version }}
+          directory: src-ui/
+          report_type: test_results
+      - name: Upload frontend coverage to Codecov
+        uses: codecov/codecov-action@v5
+        with:
+          flags: frontend-node-${{ matrix.node-version }}
+          directory: src-ui/coverage/
+  tests-frontend-e2e:
+    name: "Frontend E2E Tests (Node ${{ matrix.node-version }} - ${{ matrix.shard-index }}/${{ matrix.shard-count }})"
+    runs-on: ubuntu-24.04
+    container: mcr.microsoft.com/playwright:v1.57.0-noble
+    needs:
+      - install-frontend-dependencies
+    env:
+      PLAYWRIGHT_BROWSERS_PATH: /ms-playwright
+      PLAYWRIGHT_SKIP_BROWSER_DOWNLOAD: 1
+    strategy:
+      fail-fast: false
+      matrix:
+        node-version: [20.x]
+        shard-index: [1, 2]
+        shard-count: [2]
+    steps:
+      - uses: actions/checkout@v6
+      - name: Install pnpm
+        uses: pnpm/action-setup@v4
+        with:
+          version: 10
+      - name: Use Node.js 20
+        uses: actions/setup-node@v6
+        with:
+          node-version: 20.x
+          cache: 'pnpm'
+          cache-dependency-path: 'src-ui/pnpm-lock.yaml'
+      - name: Cache frontend dependencies
+        id: cache-frontend-deps
+        uses: actions/cache@v4
+        with:
+          path: |
+            ~/.pnpm-store
+            ~/.cache
+          key: ${{ runner.os }}-frontenddeps-${{ hashFiles('src-ui/pnpm-lock.yaml') }}
+      - name: Re-link Angular cli
+        run: cd src-ui && pnpm link @angular/cli
+      - name: Install dependencies
+        run: cd src-ui && pnpm install --no-frozen-lockfile
+      - name: Run Playwright e2e tests
+        run: cd src-ui && pnpm exec playwright test --shard ${{ matrix.shard-index }}/${{ matrix.shard-count }}
+  frontend-bundle-analysis:
+    name: "Frontend Bundle Analysis"
+    runs-on: ubuntu-24.04
+    needs:
+      - tests-frontend
+      - tests-frontend-e2e
+    steps:
+      - uses: actions/checkout@v6
+      - name: Install pnpm
+        uses: pnpm/action-setup@v4
+        with:
+          version: 10
+      - name: Use Node.js 20
+        uses: actions/setup-node@v6
+        with:
+          node-version: 20.x
+          cache: 'pnpm'
+          cache-dependency-path: 'src-ui/pnpm-lock.yaml'
+      - name: Cache frontend dependencies
+        id: cache-frontend-deps
+        uses: actions/cache@v4
+        with:
+          path: |
+            ~/.pnpm-store
+            ~/.cache
+          key: ${{ runner.os }}-frontenddeps-${{ hashFiles('src-ui/package-lock.json') }}
+      - name: Re-link Angular cli
+        run: cd src-ui && pnpm link @angular/cli
+      - name: Build frontend and upload analysis
+        env:
+          CODECOV_TOKEN: ${{ secrets.CODECOV_TOKEN }}
+        run: cd src-ui && pnpm run build --configuration=production
+  build-docker-image:
+    name: Build Docker image for ${{ github.event_name == 'pull_request' && github.head_ref || github.ref_name }}
+    runs-on: ubuntu-24.04
+    if: (github.event_name == 'push' && (startsWith(github.ref, 'refs/heads/feature-') || startsWith(github.ref, 'refs/heads/fix-') || github.ref == 'refs/heads/dev' || github.ref == 'refs/heads/beta' || contains(github.ref, 'beta.rc') || startsWith(github.ref, 'refs/tags/v') || startsWith(github.ref, 'refs/heads/l10n_'))) || (github.event_name == 'pull_request' && (startsWith(github.head_ref, 'feature-') || startsWith(github.head_ref, 'fix-') || github.head_ref == 'dev' || github.head_ref == 'beta' || contains(github.head_ref, 'beta.rc') || startsWith(github.head_ref, 'l10n_')))
+    concurrency:
+      group: ${{ github.workflow }}-build-docker-image-${{ github.ref_name }}
+      cancel-in-progress: true
+    needs:
+      - tests-backend
+      - tests-frontend
+      - tests-frontend-e2e
+    steps:
+      - name: Prepare build variables
+        id: build-vars
+        uses: actions/github-script@v8
+        with:
+          result-encoding: string
+          script: |
+            const isPR = context.eventName === 'pull_request';
+            const defaultRefName = context.ref.replace('refs/heads/', '');
+            const headRef = isPR ? context.payload.pull_request.head.ref : defaultRefName;
+            const buildRef = isPR ? `refs/heads/${headRef}` : context.ref;
+            const buildCacheKey = headRef.split('/').join('-');
+            const canPush = context.eventName === 'push' || (isPR && context.payload.pull_request.head.repo.full_name === `${context.repo.owner}/${context.repo.repo}`);
+
+            core.setOutput('build-ref', buildRef);
+            core.setOutput('build-ref-name', headRef);
+            core.setOutput('build-cache-key', buildCacheKey);
+            core.setOutput('can-push', canPush ? 'true' : 'false');
+      - name: Check pushing to Docker Hub
+        id: push-other-places
+        # Only push to Dockerhub from the main repo AND the ref is either:
+        #  main
+        #  dev
+        #  beta
+        #  a tag
+        # Otherwise forks would require a Docker Hub account and secrets setup
+        env:
+          BUILD_REF: ${{ steps.build-vars.outputs.build-ref }}
+          BUILD_REF_NAME: ${{ steps.build-vars.outputs.build-ref-name }}
+        run: |
+          if [[ ${{ github.repository_owner }} == "paperless-ngx" && ( "$BUILD_REF_NAME" == "dev" || "$BUILD_REF_NAME" == "beta" || $BUILD_REF == refs/tags/v* || $BUILD_REF == *beta.rc* ) ]] ; then
+            echo "Enabling DockerHub image push"
+            echo "enable=true" >> $GITHUB_OUTPUT
+          else
+            echo "Not pushing to DockerHub"
+            echo "enable=false" >> $GITHUB_OUTPUT
+          fi
+      - name: Set ghcr repository name
+        id: set-ghcr-repository
+        run: |
+          ghcr_name=$(echo "${{ github.repository }}" | awk '{ print tolower($0) }')
+          echo "Name is ${ghcr_name}"
+          echo "ghcr-repository=${ghcr_name}" >> $GITHUB_OUTPUT
+      - name: Gather Docker metadata
+        id: docker-meta
+        uses: docker/metadata-action@v5
+        with:
+          images: |
+            ghcr.io/${{ steps.set-ghcr-repository.outputs.ghcr-repository }}
+            name=paperlessngx/paperless-ngx,enable=${{ steps.push-other-places.outputs.enable }}
+            name=quay.io/paperlessngx/paperless-ngx,enable=${{ steps.push-other-places.outputs.enable }}
+          tags: |
+            # Tag branches with branch name
+            type=ref,event=branch
+            # Pull requests need a sanitized branch tag for pushing images
+            type=raw,value=${{ steps.build-vars.outputs.build-cache-key }},enable=${{ github.event_name == 'pull_request' }}
+            # Process semver tags
+            # For a tag x.y.z or vX.Y.Z, output an x.y.z and x.y image tag
+            type=semver,pattern={{version}}
+            type=semver,pattern={{major}}.{{minor}}
+      - name: Checkout
+        uses: actions/checkout@v6
+      # If https://github.com/docker/buildx/issues/1044 is resolved,
+      # the append input with a native arm64 arch could be used to
+      # significantly speed up building
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v3
+      - name: Set up QEMU
+        uses: docker/setup-qemu-action@v3
+        with:
+          platforms: arm64
+      - name: Login to GitHub Container Registry
+        uses: docker/login-action@v3
+        with:
+          registry: ghcr.io
+          username: ${{ github.actor }}
+          password: ${{ secrets.GITHUB_TOKEN }}
+      - name: Login to Docker Hub
+        uses: docker/login-action@v3
+        # Don't attempt to login if not pushing to Docker Hub
+        if: steps.push-other-places.outputs.enable == 'true'
+        with:
+          username: ${{ secrets.DOCKERHUB_USERNAME }}
+          password: ${{ secrets.DOCKERHUB_TOKEN }}
+      - name: Login to Quay.io
+        uses: docker/login-action@v3
+        # Don't attempt to login if not pushing to Quay.io
+        if: steps.push-other-places.outputs.enable == 'true'
+        with:
+          registry: quay.io
+          username: ${{ secrets.QUAY_USERNAME }}
+          password: ${{ secrets.QUAY_ROBOT_TOKEN }}
+      - name: Build and push
+        uses: docker/build-push-action@v6
+        with:
+          context: .
+          file: ./Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ steps.build-vars.outputs.can-push == 'true' }}
+          tags: ${{ steps.docker-meta.outputs.tags }}
+          labels: ${{ steps.docker-meta.outputs.labels }}
+          build-args: |
+            PNGX_TAG_VERSION=${{ steps.docker-meta.outputs.version }}
+          # Get cache layers from this branch, then dev
+          # This allows new branches to get at least some cache benefits, generally from dev
+          cache-from: |
+            type=registry,ref=ghcr.io/${{ steps.set-ghcr-repository.outputs.ghcr-repository }}/builder/cache/app:${{ steps.build-vars.outputs.build-cache-key }}
+            type=registry,ref=ghcr.io/${{ steps.set-ghcr-repository.outputs.ghcr-repository }}/builder/cache/app:dev
+          cache-to: ${{ steps.build-vars.outputs.can-push == 'true' && format('type=registry,mode=max,ref=ghcr.io/{0}/builder/cache/app:{1}', steps.set-ghcr-repository.outputs.ghcr-repository, steps.build-vars.outputs.build-cache-key) || '' }}
+      - name: Inspect image
+        if: steps.build-vars.outputs.can-push == 'true'
+        run: |
+          docker buildx imagetools inspect ${{ fromJSON(steps.docker-meta.outputs.json).tags[0] }}
+      - name: Export frontend artifact from docker
+        if: steps.build-vars.outputs.can-push == 'true'
+        run: |
+          docker create --name frontend-extract ${{ fromJSON(steps.docker-meta.outputs.json).tags[0] }}
+          docker cp frontend-extract:/usr/src/paperless/src/documents/static/frontend src/documents/static/frontend/
+      - name: Upload frontend artifact
+        if: steps.build-vars.outputs.can-push == 'true'
+        uses: actions/upload-artifact@v5
+        with:
+          name: frontend-compiled
+          path: src/documents/static/frontend/
+          retention-days: 7
+  build-release:
+    name: "Build Release"
+    needs:
+      - build-docker-image
+      - documentation
+    if: github.event_name == 'push'
+    runs-on: ubuntu-24.04
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v6
+      - name: Set up Python
+        id: setup-python
+        uses: actions/setup-python@v6
+        with:
+          python-version: ${{ env.DEFAULT_PYTHON_VERSION }}
+      - name: Install uv
+        uses: astral-sh/setup-uv@v7
+        with:
+          version: ${{ env.DEFAULT_UV_VERSION }}
+          enable-cache: true
+          python-version: ${{ steps.setup-python.outputs.python-version }}
+      - name: Install Python dependencies
+        run: |
+          uv sync --python ${{ steps.setup-python.outputs.python-version }} --dev --frozen
+      - name: Install system dependencies
+        run: |
+          sudo apt-get update -qq
+          sudo apt-get install -qq --no-install-recommends gettext liblept5
+      - name: Download frontend artifact
+        uses: actions/download-artifact@v6
+        with:
+          name: frontend-compiled
+          path: src/documents/static/frontend/
+      - name: Download documentation artifact
+        uses: actions/download-artifact@v6
+        with:
+          name: documentation
+          path: docs/_build/html/
+      - name: Generate requirements file
+        run: |
+          uv export --quiet --no-dev --all-extras --format requirements-txt --output-file requirements.txt
+      - name: Compile messages
+        run: |
+          cd src/
+          uv run \
+            --python ${{ steps.setup-python.outputs.python-version }} \
+            manage.py compilemessages
+      - name: Collect static files
+        run: |
+          cd src/
+          uv run \
+            --python ${{ steps.setup-python.outputs.python-version }} \
+            manage.py collectstatic --no-input
+      - name: Move files
+        run: |
+          echo "Making dist folders"
+          for directory in dist \
+                          dist/paperless-ngx \
+                          dist/paperless-ngx/scripts;
+          do
+            mkdir --verbose --parents ${directory}
+          done
+
+          echo "Copying basic files"
+          for file_name in .dockerignore \
+                          .env \
+                          Dockerfile \
+                          pyproject.toml \
+                          uv.lock \
+                          requirements.txt \
+                          LICENSE \
+                          README.md \
+                          paperless.conf.example
+          do
+            cp --verbose ${file_name} dist/paperless-ngx/
+          done
+          mv --verbose dist/paperless-ngx/paperless.conf.example dist/paperless-ngx/paperless.conf
+
+          echo "Copying Docker related files"
+          cp --recursive docker/ dist/paperless-ngx/docker
+
+          echo "Copying startup scripts"
+          cp --verbose scripts/*.service scripts/*.sh scripts/*.socket dist/paperless-ngx/scripts/
+
+          echo "Copying source files"
+          cp --recursive src/ dist/paperless-ngx/src
+          echo "Copying documentation"
+          cp --recursive docs/_build/html/ dist/paperless-ngx/docs
+
+          mv --verbose static dist/paperless-ngx
+      - name: Make release package
+        run: |
+          echo "Creating release archive"
+          cd dist
+          sudo chown -R 1000:1000 paperless-ngx/
+          tar -cJf paperless-ngx.tar.xz paperless-ngx/
+      - name: Upload release artifact
+        uses: actions/upload-artifact@v5
+        with:
+          name: release
+          path: dist/paperless-ngx.tar.xz
+          retention-days: 7
+  publish-release:
+    name: "Publish Release"
+    runs-on: ubuntu-24.04
+    outputs:
+      prerelease: ${{ steps.get_version.outputs.prerelease }}
+      changelog: ${{ steps.create-release.outputs.body }}
+      version: ${{ steps.get_version.outputs.version }}
+    needs:
+      - build-release
+    if: github.ref_type == 'tag' && (startsWith(github.ref_name, 'v') || contains(github.ref_name, '-beta.rc'))
+    steps:
+      - name: Download release artifact
+        uses: actions/download-artifact@v6
+        with:
+          name: release
+          path: ./
+      - name: Get version
+        id: get_version
+        run: |
+          echo "version=${{ github.ref_name }}" >> $GITHUB_OUTPUT
+          if [[ ${{ contains(github.ref_name, '-beta.rc') }} == 'true' ]]; then
+            echo "prerelease=true" >> $GITHUB_OUTPUT
+          else
+            echo "prerelease=false" >> $GITHUB_OUTPUT
+          fi
+      - name: Create Release and Changelog
+        id: create-release
+        uses: release-drafter/release-drafter@v6
+        with:
+          name: Paperless-ngx ${{ steps.get_version.outputs.version }}
+          tag: ${{ steps.get_version.outputs.version }}
+          version: ${{ steps.get_version.outputs.version }}
+          prerelease: ${{ steps.get_version.outputs.prerelease }}
+          publish: true # ensures release is not marked as draft
+          commitish: ${{ github.sha }}
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+      - name: Upload release archive
+        id: upload-release-asset
+        uses: shogo82148/actions-upload-release-asset@v1
+        with:
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          upload_url: ${{ steps.create-release.outputs.upload_url }}
+          asset_path: ./paperless-ngx.tar.xz
+          asset_name: paperless-ngx-${{ steps.get_version.outputs.version }}.tar.xz
+          asset_content_type: application/x-xz
+  append-changelog:
+    name: "Append Changelog"
+    runs-on: ubuntu-24.04
+    needs:
+      - publish-release
+    if: needs.publish-release.outputs.prerelease == 'false'
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v6
+        with:
+          ref: main
+      - name: Set up Python
+        id: setup-python
+        uses: actions/setup-python@v6
+        with:
+          python-version: ${{ env.DEFAULT_PYTHON_VERSION }}
+      - name: Install uv
+        uses: astral-sh/setup-uv@v7
+        with:
+          version: ${{ env.DEFAULT_UV_VERSION }}
+          enable-cache: true
+          python-version: ${{ env.DEFAULT_PYTHON_VERSION }}
+      - name: Append Changelog to docs
+        id: append-Changelog
+        working-directory: docs
+        run: |
+          git branch ${{ needs.publish-release.outputs.version }}-changelog
+          git checkout ${{ needs.publish-release.outputs.version }}-changelog
+          echo -e "# Changelog\n\n${{ needs.publish-release.outputs.changelog }}\n" > changelog-new.md
+          echo "Manually linking usernames"
+          sed -i -r 's|@([a-zA-Z0-9_]+) \(\[#|[@\1](https://github.com/\1) ([#|g' changelog-new.md
+          echo "Removing unneeded comment tags"
+          sed -i -r 's|@<!---->|@|g' changelog-new.md
+          CURRENT_CHANGELOG=`tail --lines +2 changelog.md`
+          echo -e "$CURRENT_CHANGELOG" >> changelog-new.md
+          mv changelog-new.md changelog.md
+          uv run \
+            --python ${{ steps.setup-python.outputs.python-version }} \
+            --dev \
+            pre-commit run --files changelog.md || true
+          git config --global user.name "github-actions"
+          git config --global user.email "41898282+github-actions[bot]@users.noreply.github.com"
+          git commit -am "Changelog ${{ needs.publish-release.outputs.version }} - GHA"
+          git push origin ${{ needs.publish-release.outputs.version }}-changelog
+      - name: Create Pull Request
+        uses: actions/github-script@v8
+        with:
+          script: |
+            const { repo, owner } = context.repo;
+            const result = await github.rest.pulls.create({
+              title: 'Documentation: Add ${{ needs.publish-release.outputs.version }} changelog',
+              owner,
+              repo,
+              head: '${{ needs.publish-release.outputs.version }}-changelog',
+              base: 'main',
+              body: 'This PR is auto-generated by CI.'
+            });
+            github.rest.issues.addLabels({
+              owner,
+              repo,
+              issue_number: result.data.number,
+              labels: ['documentation', 'skip-changelog']
+            });

.github/workflows/repo-maintenance.yml

@@ -37,7 +37,7 @@ jobs:
     if: github.repository_owner == 'paperless-ngx'
     runs-on: ubuntu-24.04
     steps:
-      - uses: dessant/lock-threads@v6
+      - uses: dessant/lock-threads@v5
         with:
           issue-inactive-days: '30'
           pr-inactive-days: '30'

.github/workflows/translate-strings.yml

@@ -12,11 +12,9 @@ jobs:
     steps:
       - name: Checkout code
         uses: actions/checkout@v6
-        env:
-          GH_REF: ${{ github.ref }} # sonar rule:githubactions:S7630 - avoid injection
         with:
           token: ${{ secrets.PNGX_BOT_PAT }}
-          ref: ${{ env.GH_REF }}
+          ref: ${{ github.head_ref }}
       - name: Set up Python
         id: setup-python
         uses: actions/setup-python@v6
@@ -39,15 +37,15 @@ jobs:
         uses: pnpm/action-setup@v4
         with:
           version: 10
-      - name: Use Node.js 24
+      - name: Use Node.js 20
         uses: actions/setup-node@v6
         with:
-          node-version: 24.x
+          node-version: 20.x
           cache: 'pnpm'
           cache-dependency-path: 'src-ui/pnpm-lock.yaml'
       - name: Cache frontend dependencies
         id: cache-frontend-deps
-        uses: actions/cache@v5
+        uses: actions/cache@v4
         with:
           path: |
             ~/.pnpm-store

.gitignore

@@ -40,7 +40,6 @@ htmlcov/
 .coverage
 .coverage.*
 .cache
-.uv-cache
 nosetests.xml
 coverage.xml
 *,cover

.pre-commit-config.yaml

@@ -37,7 +37,7 @@ repos:
           - json
   # See https://github.com/prettier/prettier/issues/15742 for the fork reason
   - repo: https://github.com/rbubley/mirrors-prettier
-    rev: 'v3.8.1'
+    rev: 'v3.6.2'
     hooks:
       - id: prettier
         types_or:
@@ -49,7 +49,7 @@ repos:
           - 'prettier-plugin-organize-imports@4.1.0'
   # Python hooks
   - repo: https://github.com/astral-sh/ruff-pre-commit
-    rev: v0.14.14
+    rev: v0.14.5
     hooks:
       - id: ruff-check
       - id: ruff-format
@@ -76,7 +76,7 @@ repos:
     hooks:
       - id: shellcheck
   - repo: https://github.com/google/yamlfmt
-    rev: v0.21.0
+    rev: v0.20.0
     hooks:
       - id: yamlfmt
         exclude: "^src-ui/pnpm-lock.yaml"

Dockerfile

@@ -5,12 +5,14 @@
 # Purpose: Compiles the frontend
 # Notes:
 #  - Does PNPM stuff with Typescript and such
-FROM --platform=$BUILDPLATFORM docker.io/node:24-trixie-slim AS compile-frontend
+FROM --platform=$BUILDPLATFORM docker.io/node:20-trixie-slim AS compile-frontend
 
 COPY ./src-ui /src/src-ui
 
 WORKDIR /src/src-ui
 RUN set -eux \
+  && npm update -g pnpm \
+  && npm install -g corepack@latest \
   && corepack enable \
   && pnpm install
 
@@ -30,7 +32,7 @@ RUN set -eux \
 # Purpose: Installs s6-overlay and rootfs
 # Comments:
 #  - Don't leave anything extra in here either
-FROM ghcr.io/astral-sh/uv:0.9.26-python3.12-trixie-slim AS s6-overlay-base
+FROM ghcr.io/astral-sh/uv:0.9.15-python3.12-trixie-slim AS s6-overlay-base
 
 WORKDIR /usr/src/s6
 
@@ -108,7 +110,8 @@ ENV PYTHONDONTWRITEBYTECODE=1 \
     PYTHONWARNINGS="ignore:::django.http.response:517" \
     PNGX_CONTAINERIZED=1 \
     # https://docs.astral.sh/uv/reference/settings/#link-mode
-    UV_LINK_MODE=copy
+    UV_LINK_MODE=copy \
+    UV_CACHE_DIR=/cache/uv/
 
 #
 # Begin installation and configuration
@@ -190,17 +193,14 @@ ARG BUILD_PACKAGES="\
   pkg-config"
 
 # hadolint ignore=DL3042
-RUN set -eux \
+RUN --mount=type=cache,target=${UV_CACHE_DIR},id=python-cache \
+  set -eux \
   && echo "Installing build system packages" \
     && apt-get update \
     && apt-get install --yes --quiet --no-install-recommends ${BUILD_PACKAGES} \
   && echo "Installing Python requirements" \
     && uv export --quiet --no-dev --all-extras --format requirements-txt --output-file requirements.txt \
-    && uv pip install --no-cache --system --no-python-downloads --python-preference system \
-      --index https://pypi.org/simple \
-      --index https://download.pytorch.org/whl/cpu \
-      --index-strategy unsafe-best-match \
-      --requirements requirements.txt \
+    && uv pip install --system --no-python-downloads --python-preference system --requirements requirements.txt \
   && echo "Installing NLTK data" \
     && python3 -W ignore::RuntimeWarning -m nltk.downloader -d "/usr/share/nltk_data" snowball_data \
     && python3 -W ignore::RuntimeWarning -m nltk.downloader -d "/usr/share/nltk_data" stopwords \

docker/compose/docker-compose.ci-test.yml

@@ -23,24 +23,3 @@ services:
     container_name: tika
     network_mode: host
     restart: unless-stopped
-  greenmail:
-    image: greenmail/standalone:2.1.8
-    hostname: greenmail
-    container_name: greenmail
-    environment:
-      # Enable only IMAP for now (SMTP available via 3025 if needed later)
-      GREENMAIL_OPTS: >-
-        -Dgreenmail.setup.test.imap -Dgreenmail.users=test@localhost:test -Dgreenmail.users.login=test@localhost -Dgreenmail.verbose
-    ports:
-      - "3143:3143" # IMAP
-    restart: unless-stopped
-  nginx:
-    image: docker.io/nginx:1.29-alpine
-    hostname: nginx
-    container_name: nginx
-    ports:
-      - "8080:8080"
-    restart: unless-stopped
-    volumes:
-      - ../../docs/assets:/usr/share/nginx/html/assets:ro
-      - ./test-nginx.conf:/etc/nginx/conf.d/default.conf:ro

docker/compose/test-nginx.conf

@@ -1,14 +0,0 @@
-server {
-    listen 8080;
-    server_name localhost;
-
-    root /usr/share/nginx/html;
-
-    # Enable CORS for test requests
-    add_header 'Access-Control-Allow-Origin' '*' always;
-    add_header 'Access-Control-Allow-Methods' 'GET, HEAD, OPTIONS' always;
-
-    location / {
-        try_files $uri $uri/ =404;
-    }
-}

docker/install_management_commands.sh

@@ -4,13 +4,13 @@
 
 set -eu
 
-for command in document_archiver \
+for command in decrypt_documents \
+	document_archiver \
 	document_exporter \
 	document_importer \
 	mail_fetcher \
 	document_create_classifier \
 	document_index \
-	document_llmindex \
 	document_renamer \
 	document_retagger \
 	document_thumbnails \
@@ -19,7 +19,8 @@ for command in document_archiver \
 	manage_superuser \
 	convert_mariadb_uuid \
 	prune_audit_logs \
-	createsuperuser;
+	createsuperuser \
+	document_perf_benchmark;
 do
 	echo "installing $command..."
 	sed "s/management_command/$command/g" management_script.sh >"$PWD/rootfs/usr/local/bin/$command"

docker/management_script.sh

@@ -7,6 +7,11 @@ cd "${PAPERLESS_SRC_DIR}"
 
 if [[ -n "${USER_IS_NON_ROOT}" ]]; then
 	python3 manage.py management_command "$@"
-elif [[ $(id -un) == "paperless" ]]; then
+elif [[ $(id -u) == 0 ]]; then
 	s6-setuidgid paperless python3 manage.py management_command "$@"
+elif [[ $(id -un) == "paperless" ]]; then
+	python3 manage.py management_command "$@"
+else
+	echo "Unknown user."
+	exit 1
 fi

docker/rootfs/usr/local/bin/convert_mariadb_uuid

@@ -6,7 +6,12 @@ set -e
 cd "${PAPERLESS_SRC_DIR}"
 
 if [[ -n "${USER_IS_NON_ROOT}" ]]; then
-		python3 manage.py convert_mariadb_uuid "$@"
-elif [[ $(id -un) == "paperless" ]]; then
+	python3 manage.py convert_mariadb_uuid "$@"
+elif [[ $(id -u) == 0 ]]; then
 	s6-setuidgid paperless python3 manage.py convert_mariadb_uuid "$@"
+elif [[ $(id -un) == "paperless" ]]; then
+	python3 manage.py convert_mariadb_uuid "$@"
+else
+	echo "Unknown user."
+	exit 1
 fi

docker/rootfs/usr/local/bin/createsuperuser

@@ -6,7 +6,12 @@ set -e
 cd "${PAPERLESS_SRC_DIR}"
 
 if [[ -n "${USER_IS_NON_ROOT}" ]]; then
-		python3 manage.py createsuperuser "$@"
-elif [[ $(id -un) == "paperless" ]]; then
+	python3 manage.py createsuperuser "$@"
+elif [[ $(id -u) == 0 ]]; then
 	s6-setuidgid paperless python3 manage.py createsuperuser "$@"
+elif [[ $(id -un) == "paperless" ]]; then
+	python3 manage.py createsuperuser "$@"
+else
+	echo "Unknown user."
+	exit 1
 fi

docker/rootfs/usr/local/bin/decrypt_documents

@@ -0,0 +1,17 @@
+#!/command/with-contenv /usr/bin/bash
+# shellcheck shell=bash
+
+set -e
+
+cd "${PAPERLESS_SRC_DIR}"
+
+if [[ -n "${USER_IS_NON_ROOT}" ]]; then
+	python3 manage.py decrypt_documents "$@"
+elif [[ $(id -u) == 0 ]]; then
+	s6-setuidgid paperless python3 manage.py decrypt_documents "$@"
+elif [[ $(id -un) == "paperless" ]]; then
+	python3 manage.py decrypt_documents "$@"
+else
+	echo "Unknown user."
+	exit 1
+fi

docker/rootfs/usr/local/bin/document_archiver

@@ -6,7 +6,12 @@ set -e
 cd "${PAPERLESS_SRC_DIR}"
 
 if [[ -n "${USER_IS_NON_ROOT}" ]]; then
-		python3 manage.py document_archiver "$@"
-elif [[ $(id -un) == "paperless" ]]; then
+	python3 manage.py document_archiver "$@"
+elif [[ $(id -u) == 0 ]]; then
 	s6-setuidgid paperless python3 manage.py document_archiver "$@"
+elif [[ $(id -un) == "paperless" ]]; then
+	python3 manage.py document_archiver "$@"
+else
+	echo "Unknown user."
+	exit 1
 fi

docker/rootfs/usr/local/bin/document_create_classifier

@@ -6,7 +6,16 @@ set -e
 cd "${PAPERLESS_SRC_DIR}"
 
 if [[ -n "${USER_IS_NON_ROOT}" ]]; then
-		python3 manage.py document_create_classifier "$@"
+	python3 manage.py document_create_classifier "$@"
+elif [[ $(id -u) == 0 ]]; then
+	s6-setuidgid paperless python3 manage.py document_create_classifier "$@"
+elif [[ $(id -un) == "paperless" ]]; then
+	python3 manage.py document_create_classifier "$@"
+else
+	echo "Unknown user."
+	exit 1
+fi
+er "$@"
 elif [[ $(id -un) == "paperless" ]]; then
 	s6-setuidgid paperless python3 manage.py document_create_classifier "$@"
 fi

docker/rootfs/usr/local/bin/document_exporter

@@ -6,7 +6,12 @@ set -e
 cd "${PAPERLESS_SRC_DIR}"
 
 if [[ -n "${USER_IS_NON_ROOT}" ]]; then
-		python3 manage.py document_exporter "$@"
-elif [[ $(id -un) == "paperless" ]]; then
+	python3 manage.py document_exporter "$@"
+elif [[ $(id -u) == 0 ]]; then
 	s6-setuidgid paperless python3 manage.py document_exporter "$@"
+elif [[ $(id -un) == "paperless" ]]; then
+	python3 manage.py document_exporter "$@"
+else
+	echo "Unknown user."
+	exit 1
 fi

docker/rootfs/usr/local/bin/document_fuzzy_match

@@ -6,7 +6,12 @@ set -e
 cd "${PAPERLESS_SRC_DIR}"
 
 if [[ -n "${USER_IS_NON_ROOT}" ]]; then
-		python3 manage.py document_fuzzy_match "$@"
-elif [[ $(id -un) == "paperless" ]]; then
+	python3 manage.py document_fuzzy_match "$@"
+elif [[ $(id -u) == 0 ]]; then
 	s6-setuidgid paperless python3 manage.py document_fuzzy_match "$@"
+elif [[ $(id -un) == "paperless" ]]; then
+	python3 manage.py document_fuzzy_match "$@"
+else
+	echo "Unknown user."
+	exit 1
 fi

docker/rootfs/usr/local/bin/document_importer

@@ -6,7 +6,12 @@ set -e
 cd "${PAPERLESS_SRC_DIR}"
 
 if [[ -n "${USER_IS_NON_ROOT}" ]]; then
-		python3 manage.py document_importer "$@"
-elif [[ $(id -un) == "paperless" ]]; then
+	python3 manage.py document_importer "$@"
+elif [[ $(id -u) == 0 ]]; then
 	s6-setuidgid paperless python3 manage.py document_importer "$@"
+elif [[ $(id -un) == "paperless" ]]; then
+	python3 manage.py document_importer "$@"
+else
+	echo "Unknown user."
+	exit 1
 fi

docker/rootfs/usr/local/bin/document_index

@@ -6,7 +6,12 @@ set -e
 cd "${PAPERLESS_SRC_DIR}"
 
 if [[ -n "${USER_IS_NON_ROOT}" ]]; then
-		python3 manage.py document_index "$@"
-elif [[ $(id -un) == "paperless" ]]; then
+	python3 manage.py document_index "$@"
+elif [[ $(id -u) == 0 ]]; then
 	s6-setuidgid paperless python3 manage.py document_index "$@"
+elif [[ $(id -un) == "paperless" ]]; then
+	python3 manage.py document_index "$@"
+else
+	echo "Unknown user."
+	exit 1
 fi

docker/rootfs/usr/local/bin/document_llmindex

@@ -1,14 +0,0 @@
-#!/command/with-contenv /usr/bin/bash
-# shellcheck shell=bash
-
-set -e
-
-cd "${PAPERLESS_SRC_DIR}"
-
-if [[ $(id -u) == 0 ]]; then
-	s6-setuidgid paperless python3 manage.py document_llmindex "$@"
-elif [[ $(id -un) == "paperless" ]]; then
-	python3 manage.py document_llmindex "$@"
-else
-	echo "Unknown user."
-fi

docker/rootfs/usr/local/bin/document_perf_benchmark

@@ -0,0 +1,17 @@
+#!/command/with-contenv /usr/bin/bash
+# shellcheck shell=bash
+
+set -e
+
+cd "${PAPERLESS_SRC_DIR}"
+
+if [[ -n "${USER_IS_NON_ROOT}" ]]; then
+	python3 manage.py document_perf_benchmark "$@"
+elif [[ $(id -u) == 0 ]]; then
+	s6-setuidgid paperless python3 manage.py document_perf_benchmark "$@"
+elif [[ $(id -un) == "paperless" ]]; then
+	python3 manage.py document_perf_benchmark "$@"
+else
+	echo "Unknown user."
+	exit 1
+fi

docker/rootfs/usr/local/bin/document_renamer

@@ -6,7 +6,12 @@ set -e
 cd "${PAPERLESS_SRC_DIR}"
 
 if [[ -n "${USER_IS_NON_ROOT}" ]]; then
-		python3 manage.py document_renamer "$@"
-elif [[ $(id -un) == "paperless" ]]; then
+	python3 manage.py document_renamer "$@"
+elif [[ $(id -u) == 0 ]]; then
 	s6-setuidgid paperless python3 manage.py document_renamer "$@"
+elif [[ $(id -un) == "paperless" ]]; then
+	python3 manage.py document_renamer "$@"
+else
+	echo "Unknown user."
+	exit 1
 fi

docker/rootfs/usr/local/bin/document_retagger

@@ -6,7 +6,12 @@ set -e
 cd "${PAPERLESS_SRC_DIR}"
 
 if [[ -n "${USER_IS_NON_ROOT}" ]]; then
-		python3 manage.py document_retagger "$@"
-elif [[ $(id -un) == "paperless" ]]; then
+	python3 manage.py document_retagger "$@"
+elif [[ $(id -u) == 0 ]]; then
 	s6-setuidgid paperless python3 manage.py document_retagger "$@"
+elif [[ $(id -un) == "paperless" ]]; then
+	python3 manage.py document_retagger "$@"
+else
+	echo "Unknown user."
+	exit 1
 fi

docker/rootfs/usr/local/bin/document_sanity_checker

@@ -6,7 +6,12 @@ set -e
 cd "${PAPERLESS_SRC_DIR}"
 
 if [[ -n "${USER_IS_NON_ROOT}" ]]; then
-		python3 manage.py document_sanity_checker "$@"
-elif [[ $(id -un) == "paperless" ]]; then
+	python3 manage.py document_sanity_checker "$@"
+elif [[ $(id -u) == 0 ]]; then
 	s6-setuidgid paperless python3 manage.py document_sanity_checker "$@"
+elif [[ $(id -un) == "paperless" ]]; then
+	python3 manage.py document_sanity_checker "$@"
+else
+	echo "Unknown user."
+	exit 1
 fi

docker/rootfs/usr/local/bin/document_thumbnails

@@ -6,7 +6,12 @@ set -e
 cd "${PAPERLESS_SRC_DIR}"
 
 if [[ -n "${USER_IS_NON_ROOT}" ]]; then
-		python3 manage.py document_thumbnails "$@"
-elif [[ $(id -un) == "paperless" ]]; then
+	python3 manage.py document_thumbnails "$@"
+elif [[ $(id -u) == 0 ]]; then
 	s6-setuidgid paperless python3 manage.py document_thumbnails "$@"
+elif [[ $(id -un) == "paperless" ]]; then
+	python3 manage.py document_thumbnails "$@"
+else
+	echo "Unknown user."
+	exit 1
 fi

docker/rootfs/usr/local/bin/mail_fetcher

@@ -6,7 +6,12 @@ set -e
 cd "${PAPERLESS_SRC_DIR}"
 
 if [[ -n "${USER_IS_NON_ROOT}" ]]; then
-		python3 manage.py mail_fetcher "$@"
-elif [[ $(id -un) == "paperless" ]]; then
+	python3 manage.py mail_fetcher "$@"
+elif [[ $(id -u) == 0 ]]; then
 	s6-setuidgid paperless python3 manage.py mail_fetcher "$@"
+elif [[ $(id -un) == "paperless" ]]; then
+	python3 manage.py mail_fetcher "$@"
+else
+	echo "Unknown user."
+	exit 1
 fi

docker/rootfs/usr/local/bin/manage_superuser

@@ -6,7 +6,12 @@ set -e
 cd "${PAPERLESS_SRC_DIR}"
 
 if [[ -n "${USER_IS_NON_ROOT}" ]]; then
-		python3 manage.py manage_superuser "$@"
-elif [[ $(id -un) == "paperless" ]]; then
+	python3 manage.py manage_superuser "$@"
+elif [[ $(id -u) == 0 ]]; then
 	s6-setuidgid paperless python3 manage.py manage_superuser "$@"
+elif [[ $(id -un) == "paperless" ]]; then
+	python3 manage.py manage_superuser "$@"
+else
+	echo "Unknown user."
+	exit 1
 fi

docker/rootfs/usr/local/bin/prune_audit_logs

@@ -6,7 +6,12 @@ set -e
 cd "${PAPERLESS_SRC_DIR}"
 
 if [[ -n "${USER_IS_NON_ROOT}" ]]; then
-		python3 manage.py prune_audit_logs "$@"
-elif [[ $(id -un) == "paperless" ]]; then
+	python3 manage.py prune_audit_logs "$@"
+elif [[ $(id -u) == 0 ]]; then
 	s6-setuidgid paperless python3 manage.py prune_audit_logs "$@"
+elif [[ $(id -un) == "paperless" ]]; then
+	python3 manage.py prune_audit_logs "$@"
+else
+	echo "Unknown user."
+	exit 1
 fi

docs/administration.md

@@ -580,9 +580,39 @@ document.
     documents, such as encrypted PDF documents. The archiver will skip over
     these documents each time it sees them.
 
+### Managing encryption {#encryption}
+
+!!! warning
+
+    Encryption was removed in [paperless-ng 0.9](changelog.md#paperless-ng-090)
+    because it did not really provide any additional security, the passphrase
+    was stored in a configuration file on the same system as the documents.
+    Furthermore, the entire text content of the documents is stored plain in
+    the database, even if your documents are encrypted. Filenames are not
+    encrypted as well. Finally, the web server provides transparent access to
+    your encrypted documents.
+
+    Consider running paperless on an encrypted filesystem instead, which
+    will then at least provide security against physical hardware theft.
+
+#### Enabling encryption
+
+Enabling encryption is no longer supported.
+
+#### Disabling encryption
+
+Basic usage to disable encryption of your document store:
+
+(Note: If `PAPERLESS_PASSPHRASE` isn't set already, you need to specify
+it here)
+
+```
+decrypt_documents [--passphrase SECR3TP4SSPHRA$E]
+```
+
 ### Detecting duplicates {#fuzzy_duplicate}
 
-Paperless-ngx already catches and warns of exactly matching documents,
+Paperless already catches and prevents upload of exactly matching documents,
 however a new scan of an existing document may not produce an exact bit for bit
 duplicate. But the content should be exact or close, allowing detection.
 

docs/advanced_usage.md

@@ -501,7 +501,7 @@ The `datetime` filter formats a datetime string or datetime object using Python'
 See the [strftime format code documentation](https://docs.python.org/3.13/library/datetime.html#strftime-and-strptime-format-codes)
 for the possible codes and their meanings.
 
-##### Date Localization {#date-localization}
+##### Date Localization
 
 The `localize_date` filter formats a date or datetime object into a localized string using Babel internationalization.
 This takes into account the provided locale for translation. Since this must be used on a date or datetime object,
@@ -851,8 +851,8 @@ followed by the even pages.
 
 It's important that the scan files get consumed in the correct order, and one at a time.
 You therefore need to make sure that Paperless is running while you upload the files into
-the directory; and if you're using polling, make sure that
-`CONSUMER_POLLING_INTERVAL` is set to a value lower than it takes for the second scan to appear,
+the directory; and if you're using [polling](configuration.md#polling), make sure that
+`CONSUMER_POLLING` is set to a value lower than it takes for the second scan to appear,
 like 5-10 or even lower.
 
 Another thing that might happen is that you start a double sided scan, but then forget

docs/api.md

@@ -8,7 +8,7 @@ Further documentation is provided here for some endpoints and features.
 
 ## Authorization
 
-The REST api provides five different forms of authentication.
+The REST api provides four different forms of authentication.
 
 1.  Basic authentication
 
@@ -52,14 +52,6 @@ The REST api provides five different forms of authentication.
     [configuration](configuration.md#PAPERLESS_ENABLE_HTTP_REMOTE_USER_API)),
     you can authenticate against the API using Remote User auth.
 
-5.  Headless OIDC via [`django-allauth`](https://codeberg.org/allauth/django-allauth)
-
-    `django-allauth` exposes API endpoints under `api/auth/` which enable tools
-    like third-party apps to authenticate with social accounts that are
-    configured. See
-    [here](advanced_usage.md#openid-connect-and-social-authentication) for more
-    information on social accounts.
-
 ## Searching for documents
 
 Full text searching is available on the `/api/documents/` endpoint. Two
@@ -302,13 +294,6 @@ The following methods are supported:
         -   `"delete_original": true` to delete the original documents after editing.
         -   `"update_document": true` to update the existing document with the edited PDF.
         -   `"include_metadata": true` to copy metadata from the original document to the edited document.
--   `remove_password`
-    -   Requires `parameters`:
-        -   `"password": "PASSWORD_STRING"` The password to remove from the PDF documents.
-    -   Optional `parameters`:
-        -   `"update_document": true` to replace the existing document with the password-less PDF.
-        -   `"delete_original": true` to delete the original document after editing.
-        -   `"include_metadata": true` to copy metadata from the original document to the new password-less document.
 -   `merge`
     -   No additional `parameters` required.
     -   The ordering of the merged document is determined by the list of IDs.

docs/changelog.md

@@ -1,60 +1,7 @@
 # Changelog
 
-## paperless-ngx 2.20.5
-
-### Bug Fixes
-
--   Fix: ensure horizontal scroll for long tag names in list, wrap tags without parent [@shamoon](https://github.com/shamoon) ([#11811](https://github.com/paperless-ngx/paperless-ngx/pull/11811))
--   Fix: use explicit order field for workflow actions [@shamoon](https://github.com/shamoon) [@stumpylog](https://github.com/stumpylog) ([#11781](https://github.com/paperless-ngx/paperless-ngx/pull/11781))
-
-### All App Changes
-
-<details>
-<summary>2 changes</summary>
-
--   Fix: ensure horizontal scroll for long tag names in list, wrap tags without parent [@shamoon](https://github.com/shamoon) ([#11811](https://github.com/paperless-ngx/paperless-ngx/pull/11811))
--   Fix: use explicit order field for workflow actions [@shamoon](https://github.com/shamoon) [@stumpylog](https://github.com/stumpylog) ([#11781](https://github.com/paperless-ngx/paperless-ngx/pull/11781))
-</details>
-
-## paperless-ngx 2.20.4
-
-### Security
-
--   Resolve [GHSA-28cf-xvcf-hw6m](https://github.com/paperless-ngx/paperless-ngx/security/advisories/GHSA-28cf-xvcf-hw6m)
-
-### Bug Fixes
-
--   Fix: propagate metadata override created value [@shamoon](https://github.com/shamoon) ([#11659](https://github.com/paperless-ngx/paperless-ngx/pull/11659))
--   Fix: support ordering by storage path name [@shamoon](https://github.com/shamoon) ([#11661](https://github.com/paperless-ngx/paperless-ngx/pull/11661))
--   Fix: validate cf integer values within PostgreSQL range [@shamoon](https://github.com/shamoon) ([#11666](https://github.com/paperless-ngx/paperless-ngx/pull/11666))
--   Fixhancement: add error handling and retry when opening index [@shamoon](https://github.com/shamoon) ([#11731](https://github.com/paperless-ngx/paperless-ngx/pull/11731))
--   Fix: fix recurring workflow to respect latest run time [@shamoon](https://github.com/shamoon) ([#11735](https://github.com/paperless-ngx/paperless-ngx/pull/11735))
-
-### All App Changes
-
-<details>
-<summary>5 changes</summary>
-
--   Fix: propagate metadata override created value [@shamoon](https://github.com/shamoon) ([#11659](https://github.com/paperless-ngx/paperless-ngx/pull/11659))
--   Fix: support ordering by storage path name [@shamoon](https://github.com/shamoon) ([#11661](https://github.com/paperless-ngx/paperless-ngx/pull/11661))
--   Fix: validate cf integer values within PostgreSQL range [@shamoon](https://github.com/shamoon) ([#11666](https://github.com/paperless-ngx/paperless-ngx/pull/11666))
--   Fixhancement: add error handling and retry when opening index [@shamoon](https://github.com/shamoon) ([#11731](https://github.com/paperless-ngx/paperless-ngx/pull/11731))
--   Fix: fix recurring workflow to respect latest run time [@shamoon](https://github.com/shamoon) ([#11735](https://github.com/paperless-ngx/paperless-ngx/pull/11735))
-</details>
-
-## paperless-ngx 2.20.3
-
-### Security
-
--   Resolve [GHSA-7cq3-mhxq-w946](https://github.com/paperless-ngx/paperless-ngx/security/advisories/GHSA-7cq3-mhxq-w946)
-
 ## paperless-ngx 2.20.2
 
-### Security
-
--   Resolve [GHSA-6653-vcx4-69mc](https://github.com/paperless-ngx/paperless-ngx/security/advisories/GHSA-6653-vcx4-69mc)
--   Resolve [GHSA-24x5-wp64-9fcc](https://github.com/paperless-ngx/paperless-ngx/security/advisories/GHSA-24x5-wp64-9fcc)
-
 ### Features / Enhancements
 
 -   Tweakhancement: dim inactive users in users-groups list [@shamoon](https://github.com/shamoon) ([#11537](https://github.com/paperless-ngx/paperless-ngx/pull/11537))

docs/configuration.md

@@ -170,18 +170,11 @@ Available options are `postgresql` and `mariadb`.
 
     !!! note
 
-        A pool of 8-10 connections per worker is typically sufficient.
-        If you encounter error messages such as `couldn't get a connection`
-        or database connection timeouts, you probably need to increase the pool size.
-
-    !!! warning
-        Make sure your PostgreSQL `max_connections` setting is large enough to handle the connection pools:
-        `(NB_PAPERLESS_WORKERS + NB_CELERY_WORKERS) × POOL_SIZE + SAFETY_MARGIN`. For example, with
-        4 Paperless workers and 2 Celery workers, and a pool size of 8:``(4 + 2) × 8 + 10 = 58`,
-        so `max_connections = 60` (or even more) is appropriate.
-
-        This assumes only Paperless-ngx connects to your PostgreSQL instance. If you have other applications,
-        you should increase `max_connections` accordingly.
+        A small pool is typically sufficient — for example, a size of 4.
+        Make sure your PostgreSQL server's max_connections setting is large enough to handle:
+        ```(Paperless workers + Celery workers) × pool size + safety margin```
+        For example, with 4 Paperless workers and 2 Celery workers, and a pool size of 4:
+        (4 + 2) × 4 + 10 = 34 connections required.
 
 #### [`PAPERLESS_DB_READ_CACHE_ENABLED=<bool>`](#PAPERLESS_DB_READ_CACHE_ENABLED) {#PAPERLESS_DB_READ_CACHE_ENABLED}
 
@@ -659,7 +652,7 @@ system. See the corresponding
 
 : Sync groups from the third party authentication system (e.g. OIDC) to Paperless-ngx. When enabled, users will be added or removed from groups based on their group membership in the third party authentication system. Groups must already exist in Paperless-ngx and have the same name as in the third party authentication system. Groups are updated upon logging in via the third party authentication system, see the corresponding [django-allauth documentation](https://docs.allauth.org/en/dev/socialaccount/signals.html).
 
-: In order to pass groups from the authentication system you will need to update your [PAPERLESS_SOCIALACCOUNT_PROVIDERS](#PAPERLESS_SOCIALACCOUNT_PROVIDERS) setting by adding a top-level "SCOPES" setting which includes "groups", or the custom groups claim configured in [`PAPERLESS_SOCIAL_ACCOUNT_SYNC_GROUPS_CLAIM`](#PAPERLESS_SOCIAL_ACCOUNT_SYNC_GROUPS_CLAIM) e.g.:
+: In order to pass groups from the authentication system you will need to update your [PAPERLESS_SOCIALACCOUNT_PROVIDERS](#PAPERLESS_SOCIALACCOUNT_PROVIDERS) setting by adding a top-level "SCOPES" setting which includes "groups", e.g.:
 
     ```json
     {"openid_connect":{"SCOPE": ["openid","profile","email","groups"]...
@@ -667,12 +660,6 @@ system. See the corresponding
 
     Defaults to False
 
-#### [`PAPERLESS_SOCIAL_ACCOUNT_SYNC_GROUPS_CLAIM=<str>`](#PAPERLESS_SOCIAL_ACCOUNT_SYNC_GROUPS_CLAIM) {#PAPERLESS_SOCIAL_ACCOUNT_SYNC_GROUPS_CLAIM}
-
-: Allows you to define a custom groups claim. See [PAPERLESS_SOCIAL_ACCOUNT_SYNC_GROUPS](#PAPERLESS_SOCIAL_ACCOUNT_SYNC_GROUPS) which is required for this setting to take effect.
-
-    Defaults to "groups"
-
 #### [`PAPERLESS_SOCIAL_ACCOUNT_DEFAULT_GROUPS=<comma-separated-list>`](#PAPERLESS_SOCIAL_ACCOUNT_DEFAULT_GROUPS) {#PAPERLESS_SOCIAL_ACCOUNT_DEFAULT_GROUPS}
 
 : A list of group names that users who signup via social accounts will be added to upon signup. Groups listed here must already exist.
@@ -1020,7 +1007,7 @@ still perform some basic text pre-processing before matching.
 
 : See also `PAPERLESS_NLTK_DIR`.
 
-    Defaults to true, enabling the feature.
+    Defaults to 1.
 
 #### [`PAPERLESS_DATE_PARSER_LANGUAGES=<lang>`](#PAPERLESS_DATE_PARSER_LANGUAGES) {#PAPERLESS_DATE_PARSER_LANGUAGES}
 
@@ -1087,7 +1074,7 @@ valid crontab(5) expression describing when to run.
 
 : Enables compression of the responses from the webserver.
 
-: Defaults to true, enabling compression.
+: Defaults to 1, enabling compression.
 
     !!! note
 
@@ -1152,9 +1139,8 @@ via the consumption directory, you can disable the consumer to save resources.
 
 #### [`PAPERLESS_CONSUMER_DELETE_DUPLICATES=<bool>`](#PAPERLESS_CONSUMER_DELETE_DUPLICATES) {#PAPERLESS_CONSUMER_DELETE_DUPLICATES}
 
-: As of version 3.0 Paperless-ngx allows duplicate documents to be consumed by default, _except_ when
-this setting is enabled. When enabled, Paperless will check if a document with the same hash already
-exists in the system and delete the duplicate file from the consumption directory without consuming it.
+: When the consumer detects a duplicate document, it will not touch
+the original document. This default behavior can be changed here.
 
     Defaults to false.
 
@@ -1182,45 +1168,21 @@ don't exist yet.
 
 #### [`PAPERLESS_CONSUMER_IGNORE_PATTERNS=<json>`](#PAPERLESS_CONSUMER_IGNORE_PATTERNS) {#PAPERLESS_CONSUMER_IGNORE_PATTERNS}
 
-: Additional regex patterns for files to ignore in the consumption directory. Patterns are matched against filenames only (not full paths)
-using Python's `re.match()`, which anchors at the start of the filename.
+: By default, paperless ignores certain files and folders in the
+consumption directory, such as system files created by the Mac OS
+or hidden folders some tools use to store data.
 
-    See the [watchfiles documentation](https://watchfiles.helpmanual.io/api/filters/#watchfiles.BaseFilter.ignore_entity_patterns)
+    This can be adjusted by configuring a custom json array with
+    patterns to exclude.
 
-    This setting is for additional patterns beyond the built-in defaults. Common system files and directories are already ignored automatically.
-    The patterns will be compiled via Python's standard `re` module.
+    For example, `.DS_STORE/*` will ignore any files found in a folder
+    named `.DS_STORE`, including `.DS_STORE/bar.pdf` and `foo/.DS_STORE/bar.pdf`
 
-    Example custom patterns:
+    A pattern like `._*` will ignore anything starting with `._`, including:
+    `._foo.pdf` and `._bar/foo.pdf`
 
-    ```json
-    ["^temp_", "\\.bak$", "^~"]
-    ```
-
-    This would ignore:
-
-    - Files starting with `temp_` (e.g., `temp_scan.pdf`)
-    - Files ending with `.bak` (e.g., `document.pdf.bak`)
-    - Files starting with `~` (e.g., `~$document.docx`)
-
-    Defaults to `[]` (empty list, uses only built-in defaults).
-
-    The default ignores are `[.DS_Store, .DS_STORE, ._*, desktop.ini, Thumbs.db]` and cannot be overridden.
-
-#### [`PAPERLESS_CONSUMER_IGNORE_DIRS=<json>`](#PAPERLESS_CONSUMER_IGNORE_DIRS) {#PAPERLESS_CONSUMER_IGNORE_DIRS}
-
-: Additional directory names to ignore in the consumption directory. Directories matching these names (and all their contents) will be skipped.
-
-    This setting is for additional directories beyond the built-in defaults. Matching is done by directory name only, not full path.
-
-    Example:
-
-    ```json
-    ["temp", "incoming", ".hidden"]
-    ```
-
-    Defaults to `[]` (empty list, uses only built-in defaults).
-
-    The default ignores are `[.stfolder, .stversions, .localized, @eaDir, .Spotlight-V100, .Trashes, __MACOSX]` and cannot be overridden.
+    Defaults to
+    `[".DS_Store", ".DS_STORE", "._*", ".stfolder/*", ".stversions/*", ".localized/*", "desktop.ini", "@eaDir/*", "Thumbs.db"]`.
 
 #### [`PAPERLESS_CONSUMER_BARCODE_SCANNER=<string>`](#PAPERLESS_CONSUMER_BARCODE_SCANNER) {#PAPERLESS_CONSUMER_BARCODE_SCANNER}
 
@@ -1319,24 +1281,48 @@ within your documents.
 
     Defaults to false.
 
-#### [`PAPERLESS_CONSUMER_POLLING_INTERVAL=<num>`](#PAPERLESS_CONSUMER_POLLING_INTERVAL) {#PAPERLESS_CONSUMER_POLLING_INTERVAL}
+### Polling {#polling}
 
-: Configures how the consumer detects new files in the consumption directory.
+#### [`PAPERLESS_CONSUMER_POLLING=<num>`](#PAPERLESS_CONSUMER_POLLING) {#PAPERLESS_CONSUMER_POLLING}
 
-    When set to `0` (default), paperless uses native filesystem notifications for efficient, immediate detection of new files.
+: If paperless won't find documents added to your consume folder, it
+might not be able to automatically detect filesystem changes. In
+that case, specify a polling interval in seconds here, which will
+then cause paperless to periodically check your consumption
+directory for changes. This will also disable listening for file
+system changes with `inotify`.
 
-    When set to a positive number, paperless polls the consumption directory at that interval in seconds. Use polling for network filesystems (NFS, SMB/CIFS) where native notifications may not work reliably.
+    Defaults to 0, which disables polling and uses filesystem
+    notifications.
 
-    Defaults to 0.
+#### [`PAPERLESS_CONSUMER_POLLING_RETRY_COUNT=<num>`](#PAPERLESS_CONSUMER_POLLING_RETRY_COUNT) {#PAPERLESS_CONSUMER_POLLING_RETRY_COUNT}
 
-#### [`PAPERLESS_CONSUMER_STABILITY_DELAY=<num>`](#PAPERLESS_CONSUMER_STABILITY_DELAY) {#PAPERLESS_CONSUMER_STABILITY_DELAY}
+: If consumer polling is enabled, sets the maximum number of times
+paperless will check for a file to remain unmodified. If a file's
+modification time and size are identical for two consecutive checks, it
+will be consumed.
 
-: Sets the time in seconds that a file must remain unchanged (same size and modification time) before paperless will begin consuming it.
+    Defaults to 5.
 
-    Increase this value if you experience issues with files being consumed before they are fully written, particularly on slower network storage or
-    with certain scanner quirks
+#### [`PAPERLESS_CONSUMER_POLLING_DELAY=<num>`](#PAPERLESS_CONSUMER_POLLING_DELAY) {#PAPERLESS_CONSUMER_POLLING_DELAY}
 
-    Defaults to 5.0 seconds.
+: If consumer polling is enabled, sets the delay in seconds between
+each check (above) paperless will do while waiting for a file to
+remain unmodified.
+
+    Defaults to 5.
+
+### iNotify {#inotify}
+
+#### [`PAPERLESS_CONSUMER_INOTIFY_DELAY=<num>`](#PAPERLESS_CONSUMER_INOTIFY_DELAY) {#PAPERLESS_CONSUMER_INOTIFY_DELAY}
+
+: Sets the time in seconds the consumer will wait for additional
+events from inotify before the consumer will consider a file ready
+and begin consumption. Certain scanners or network setups may
+generate multiple events for a single file, leading to multiple
+consumers working on the same file. Configure this to prevent that.
+
+    Defaults to 0.5 seconds.
 
 ## Workflow webhooks
 
@@ -1617,16 +1603,6 @@ processing. This only has an effect if
 
     Defaults to `0 1 * * *`, once per day.
 
-## Share links
-
-#### [`PAPERLESS_SHARE_LINK_BUNDLE_CLEANUP_CRON=<cron expression>`](#PAPERLESS_SHARE_LINK_BUNDLE_CLEANUP_CRON) {#PAPERLESS_SHARE_LINK_BUNDLE_CLEANUP_CRON}
-
-: Controls how often Paperless-ngx removes expired share link bundles (and their generated ZIP archives).
-
-: If set to the string "disable", expired bundles are not cleaned up automatically.
-
-    Defaults to `0 2 * * *`, once per day at 02:00.
-
 ## Binaries
 
 There are a few external software packages that Paperless expects to
@@ -1828,87 +1804,3 @@ password. All of these options come from their similarly-named [Django settings]
 #### [`PAPERLESS_EMAIL_USE_SSL=<bool>`](#PAPERLESS_EMAIL_USE_SSL) {#PAPERLESS_EMAIL_USE_SSL}
 
 : Defaults to false.
-
-## Remote OCR
-
-#### [`PAPERLESS_REMOTE_OCR_ENGINE=<str>`](#PAPERLESS_REMOTE_OCR_ENGINE) {#PAPERLESS_REMOTE_OCR_ENGINE}
-
-: The remote OCR engine to use. Currently only Azure AI is supported as "azureai".
-
-    Defaults to None, which disables remote OCR.
-
-#### [`PAPERLESS_REMOTE_OCR_API_KEY=<str>`](#PAPERLESS_REMOTE_OCR_API_KEY) {#PAPERLESS_REMOTE_OCR_API_KEY}
-
-: The API key to use for the remote OCR engine.
-
-    Defaults to None.
-
-#### [`PAPERLESS_REMOTE_OCR_ENDPOINT=<str>`](#PAPERLESS_REMOTE_OCR_ENDPOINT) {#PAPERLESS_REMOTE_OCR_ENDPOINT}
-
-: The endpoint to use for the remote OCR engine. This is required for Azure AI.
-
-    Defaults to None.
-
-## AI {#ai}
-
-#### [`PAPERLESS_AI_ENABLED=<bool>`](#PAPERLESS_AI_ENABLED) {#PAPERLESS_AI_ENABLED}
-
-: Enables the AI features in Paperless. This includes the AI-based
-suggestions. This setting is required to be set to true in order to use the AI features.
-
-    Defaults to false.
-
-#### [`PAPERLESS_AI_LLM_EMBEDDING_BACKEND=<str>`](#PAPERLESS_AI_LLM_EMBEDDING_BACKEND) {#PAPERLESS_AI_LLM_EMBEDDING_BACKEND}
-
-: The embedding backend to use for RAG. This can be either "openai" or "huggingface".
-
-    Defaults to None.
-
-#### [`PAPERLESS_AI_LLM_EMBEDDING_MODEL=<str>`](#PAPERLESS_AI_LLM_EMBEDDING_MODEL) {#PAPERLESS_AI_LLM_EMBEDDING_MODEL}
-
-: The model to use for the embedding backend for RAG. This can be set to any of the embedding models supported by the current embedding backend. If not supplied, defaults to "text-embedding-3-small" for OpenAI and "sentence-transformers/all-MiniLM-L6-v2" for Huggingface.
-
-    Defaults to None.
-
-#### [`PAPERLESS_AI_LLM_BACKEND=<str>`](#PAPERLESS_AI_LLM_BACKEND) {#PAPERLESS_AI_LLM_BACKEND}
-
-: The AI backend to use. This can be either "openai" or "ollama". If set to "ollama", the AI
-features will be run locally on your machine. If set to "openai", the AI features will be run
-using the OpenAI API. This setting is required to be set to use the AI features.
-
-    Defaults to None.
-
-    !!! note
-
-        The OpenAI API is a paid service. You will need to set up an OpenAI account and
-        will be charged for usage incurred by Paperless-ngx features and your document data
-        will (of course) be sent to the OpenAI API. Paperless-ngx does not endorse the use of the
-        OpenAI API in any way.
-
-        Refer to the OpenAI terms of service, and use at your own risk.
-
-#### [`PAPERLESS_AI_LLM_MODEL=<str>`](#PAPERLESS_AI_LLM_MODEL) {#PAPERLESS_AI_LLM_MODEL}
-
-: The model to use for the AI backend, i.e. "gpt-3.5-turbo", "gpt-4" or any of the models supported by the
-current backend. If not supplied, defaults to "gpt-3.5-turbo" for OpenAI and "llama3.1" for Ollama.
-
-    Defaults to None.
-
-#### [`PAPERLESS_AI_LLM_API_KEY=<str>`](#PAPERLESS_AI_LLM_API_KEY) {#PAPERLESS_AI_LLM_API_KEY}
-
-: The API key to use for the AI backend. This is required for the OpenAI backend (optional for others).
-
-    Defaults to None.
-
-#### [`PAPERLESS_AI_LLM_ENDPOINT=<str>`](#PAPERLESS_AI_LLM_ENDPOINT) {#PAPERLESS_AI_LLM_ENDPOINT}
-
-: The endpoint / url to use for the AI backend. This is required for the Ollama backend (optional for others).
-
-    Defaults to None.
-
-#### [`PAPERLESS_AI_LLM_INDEX_TASK_CRON=<cron expression>`](#PAPERLESS_AI_LLM_INDEX_TASK_CRON) {#PAPERLESS_AI_LLM_INDEX_TASK_CRON}
-
-: Configures the schedule to update the AI embeddings of text content and metadata for all documents. Only performed if
-AI is enabled and the LLM embedding backend is set.
-
-    Defaults to `10 2 * * *`, once per day.

docs/development.md

@@ -175,7 +175,7 @@ To add a new development package `uv add --dev <package>`
 
 ## Front end development
 
-The front end is built using AngularJS. In order to get started, you need Node.js (version 24+) and
+The front end is built using AngularJS. In order to get started, you need Node.js (version 14.15+) and
 `pnpm`.
 
 !!! note

docs/index.md

@@ -25,13 +25,11 @@ physical documents into a searchable online archive so you can keep, well, _less
 ## Features
 
 -   **Organize and index** your scanned documents with tags, correspondents, types, and more.
--   _Your_ data is stored locally on _your_ server and is never transmitted or shared in any way, unless you explicitly choose to do so.
+-   _Your_ data is stored locally on _your_ server and is never transmitted or shared in any way.
 -   Performs **OCR** on your documents, adding searchable and selectable text, even to documents scanned with only images.
-    -   Utilizes the open-source Tesseract engine to recognize more than 100 languages.
-    -   _New!_ Supports remote OCR with Azure AI (opt-in).
+-   Utilizes the open-source Tesseract engine to recognize more than 100 languages.
 -   Documents are saved as PDF/A format which is designed for long term storage, alongside the unaltered originals.
 -   Uses machine-learning to automatically add tags, correspondents and document types to your documents.
--   **New**: Paperless-ngx can now leverage AI (Large Language Models or LLMs) for document suggestions. This is an optional feature that can be enabled (and is disabled by default).
 -   Supports PDF documents, images, plain text files, Office documents (Word, Excel, PowerPoint, and LibreOffice equivalents)[^1] and more.
 -   Paperless stores your documents plain on disk. Filenames and folders are managed by paperless and their format can be configured freely with different configurations assigned to different documents.
 -   **Beautiful, modern web application** that features:

docs/migration.md

@@ -1,25 +0,0 @@
-# v3 Migration Guide
-
-## Consumer Settings Changes
-
-The v3 consumer command uses a [different library](https://watchfiles.helpmanual.io/) to unify
-the watching for new files in the consume directory. For the user, this removes several configuration options related to delays and retries
-and replaces with a single unified setting. It also adjusts how the consumer ignore filtering happens, replaced `fnmatch` with `regex` and
-separating the directory ignore from the file ignore.
-
-### Summary
-
-| Old Setting                    | New Setting                                                                         | Notes                                                                                |
-| ------------------------------ | ----------------------------------------------------------------------------------- | ------------------------------------------------------------------------------------ |
-| `CONSUMER_POLLING`             | [`CONSUMER_POLLING_INTERVAL`](configuration.md#PAPERLESS_CONSUMER_POLLING_INTERVAL) | Renamed for clarity                                                                  |
-| `CONSUMER_INOTIFY_DELAY`       | [`CONSUMER_STABILITY_DELAY`](configuration.md#PAPERLESS_CONSUMER_STABILITY_DELAY)   | Unified for all modes                                                                |
-| `CONSUMER_POLLING_DELAY`       | _Removed_                                                                           | Use `CONSUMER_STABILITY_DELAY`                                                       |
-| `CONSUMER_POLLING_RETRY_COUNT` | _Removed_                                                                           | Automatic with stability tracking                                                    |
-| `CONSUMER_IGNORE_PATTERNS`     | [`CONSUMER_IGNORE_PATTERNS`](configuration.md#PAPERLESS_CONSUMER_IGNORE_PATTERNS)   | **Now regex, not fnmatch**; user patterns are added to (not replacing) default ones  |
-| _New_                          | [`CONSUMER_IGNORE_DIRS`](configuration.md#PAPERLESS_CONSUMER_IGNORE_DIRS)           | Additional directories to ignore; user entries are added to (not replacing) defaults |
-
-## Encryption Support
-
-Document and thumbnail encryption is no longer supported. This was previously deprecated in [paperless-ng 0.9.3](https://github.com/paperless-ngx/paperless-ngx/blob/dev/docs/changelog.md#paperless-ng-093)
-
-Users must decrypt their document using the `decrypt_documents` command before upgrading.

docs/setup.md

@@ -124,7 +124,8 @@ account. The script essentially automatically performs the steps described in [D
         system notifications with `inotify`. When storing the consumption
         directory on such a file system, paperless will not pick up new
         files with the default configuration. You will need to use
-        [`PAPERLESS_CONSUMER_POLLING_INTERVAL`](configuration.md#PAPERLESS_CONSUMER_POLLING_INTERVAL), which will disable inotify.
+        [`PAPERLESS_CONSUMER_POLLING`](configuration.md#PAPERLESS_CONSUMER_POLLING), which will disable inotify. See
+        [here](configuration.md#polling).
 
 5.  Run `docker compose pull`. This will pull the image from the GitHub container registry
     by default but you can change the image to pull from Docker Hub by changing the `image`

docs/troubleshooting.md

@@ -46,9 +46,9 @@ run:
 If you notice that the consumer will only pickup files in the
 consumption directory at startup, but won't find any other files added
 later, you will need to enable filesystem polling with the configuration
-option [`PAPERLESS_CONSUMER_POLLING_INTERVAL`](configuration.md#PAPERLESS_CONSUMER_POLLING_INTERVAL).
+option [`PAPERLESS_CONSUMER_POLLING`](configuration.md#PAPERLESS_CONSUMER_POLLING).
 
-This will disable automatic listening for filesystem changes and
+This will disable listening to filesystem changes with inotify and
 paperless will manually check the consumption directory for changes
 instead.
 
@@ -234,9 +234,47 @@ FileNotFoundError: [Errno 2] No such file or directory: '/tmp/ocrmypdf.io.yhk3zb
 
 This probably indicates paperless tried to consume the same file twice.
 This can happen for a number of reasons, depending on how documents are
-placed into the consume folder, such as how a scanner may modify a file multiple times as it scans.
-Try adjusting the
-[file stability delay](configuration.md#PAPERLESS_CONSUMER_STABILITY_DELAY) to a larger value.
+placed into the consume folder. If paperless is using inotify (the
+default) to check for documents, try adjusting the
+[inotify configuration](configuration.md#inotify). If polling is enabled, try adjusting the
+[polling configuration](configuration.md#polling).
+
+## Consumer fails waiting for file to remain unmodified.
+
+You might find messages like these in your log files:
+
+```
+[ERROR] [paperless.management.consumer] Timeout while waiting on file /usr/src/paperless/src/../consume/SCN_0001.pdf to remain unmodified.
+```
+
+This indicates paperless timed out while waiting for the file to be
+completely written to the consume folder. Adjusting
+[polling configuration](configuration.md#polling) values should resolve the issue.
+
+!!! note
+
+    The user will need to manually move the file out of the consume folder
+    and back in, for the initial failing file to be consumed.
+
+## Consumer fails reporting "OS reports file as busy still".
+
+You might find messages like these in your log files:
+
+```
+[WARNING] [paperless.management.consumer] Not consuming file /usr/src/paperless/src/../consume/SCN_0001.pdf: OS reports file as busy still
+```
+
+This indicates paperless was unable to open the file, as the OS reported
+the file as still being in use. To prevent a crash, paperless did not
+try to consume the file. If paperless is using inotify (the default) to
+check for documents, try adjusting the
+[inotify configuration](configuration.md#inotify). If polling is enabled, try adjusting the
+[polling configuration](configuration.md#polling).
+
+!!! note
+
+    The user will need to manually move the file out of the consume folder
+    and back in, for the initial failing file to be consumed.
 
 ## Log reports "Creating PaperlessTask failed".
 

docs/usage.md

@@ -278,28 +278,6 @@ Once setup, navigating to the email settings page in Paperless-ngx will allow yo
 You can also submit a document using the REST API, see [POSTing documents](api.md#file-uploads)
 for details.
 
-## Document Suggestions
-
-Paperless-ngx can suggest tags, correspondents, document types and storage paths for documents based on the content of the document. This is done using a (non-LLM) machine learning model that is trained on the documents in your database. The suggestions are shown in the document detail page and can be accepted or rejected by the user.
-
-## AI Features
-
-Paperless-ngx includes several features that use AI to enhance the document management experience. These features are optional and can be enabled or disabled in the settings. If you are using the AI features, you may want to also enable the "LLM index" feature, which supports Retrieval-Augmented Generation (RAG) designed to improve the quality of AI responses. The LLM index feature is not enabled by default and requires additional configuration.
-
-!!! warning
-
-    Remember that Paperless-ngx will send document content to the AI provider you have configured, so consider the privacy implications of using these features, especially if using a remote model (e.g. OpenAI), instead of the default local model.
-
-The AI features work by creating an embedding of the text content and metadata of documents, which is then used for various tasks such as similarity search and question answering. This uses the FAISS vector store.
-
-### AI-Enhanced Suggestions
-
-If enabled, Paperless-ngx can use an AI LLM model to suggest document titles, dates, tags, correspondents and document types for documents. This feature will always be "opt-in" and does not disable the existing classifier-based suggestion system. Currently, both remote (via the OpenAI API) and local (via Ollama) models are supported, see [configuration](configuration.md#ai) for details.
-
-### Document Chat
-
-Paperless-ngx can use an AI LLM model to answer questions about a document or across multiple documents. Again, this feature works best when RAG is enabled. The chat feature is available in the upper app toolbar and will switch between chatting across multiple documents or a single document based on the current view.
-
 ## Sharing documents from Paperless-ngx
 
 Paperless-ngx supports sharing documents with other users by assigning them [permissions](#object-permissions)
@@ -308,14 +286,12 @@ or using [email](#workflow-action-email) or [webhook](#workflow-action-webhook)
 
 ### Share Links
 
-"Share links" are public links to files (or an archive of files) and can be created and managed under the 'Send' button on the document detail screen or from the bulk editor.
+"Share links" are shareable public links to files and can be created and managed under the 'Send' button on the document detail screen.
 
--   Share links do not require a user to login and thus link directly to a file or bundled download.
+-   Share links do not require a user to login and thus link directly to a file.
 -   Links are unique and are of the form `{paperless-url}/share/{randomly-generated-slug}`.
 -   Links can optionally have an expiration time set.
 -   After a link expires or is deleted users will be redirected to the regular paperless-ngx login.
--   From the document detail screen you can create a share link for that single document.
--   From the bulk editor you can create a **share link bundle** for any selection. Paperless-ngx prepares a ZIP archive in the background and exposes a single share link. You can revisit the "Manage share link bundles" dialog to monitor progress, retry failed bundles, or delete links.
 
 !!! tip
 
@@ -567,7 +543,7 @@ This allows for complex logic to be used to generate the title, including [logic
 and [filters](https://jinja.palletsprojects.com/en/3.1.x/templates/#id11).
 The template is provided as a string.
 
-Using Jinja2 Templates is also useful for [Date localization](advanced_usage.md#date-localization) in the title.
+Using Jinja2 Templates is also useful for [Date localization](advanced_usage.md#Date-Localization) in the title.
 
 The available inputs differ depending on the type of workflow trigger.
 This is because at the time of consumption (when the text is to be set), no automatic tags etc. have been
@@ -599,7 +575,6 @@ The following placeholders are only available for "added" or "updated" triggers
 -   `{{created_day}}`: created day
 -   `{{created_time}}`: created time in HH:MM format
 -   `{{doc_url}}`: URL to the document in the web UI. Requires the `PAPERLESS_URL` setting to be set.
--   `{{doc_id}}`: Document ID
 
 ##### Examples
 
@@ -926,21 +901,6 @@ how regularly you intend to scan documents and use paperless.
     performed the task associated with the document, move it to the
     inbox.
 
-## Remote OCR
-
-!!! important
-
-    This feature is disabled by default and will always remain strictly "opt-in".
-
-Paperless-ngx supports performing OCR on documents using remote services. At the moment, this is limited to
-[Microsoft's Azure "Document Intelligence" service](https://azure.microsoft.com/en-us/products/ai-services/ai-document-intelligence).
-This is of course a paid service (with a free tier) which requires an Azure account and subscription. Azure AI is not affiliated with
-Paperless-ngx in any way. When enabled, Paperless-ngx will automatically send appropriate documents to Azure for OCR processing, bypassing
-the local OCR engine. See the [configuration](configuration.md#PAPERLESS_REMOTE_OCR_ENGINE) options for more details.
-
-Additionally, when using a commercial service with this feature, consider both potential costs as well as any associated file size
-or page limitations (e.g. with a free tier).
-
 ## Architecture
 
 Paperless-ngx consists of the following components:

mkdocs.yml

@@ -69,9 +69,8 @@ nav:
   - development.md
   - 'FAQs': faq.md
   - troubleshooting.md
-  - 'Migration to v3': migration.md
   - changelog.md
-copyright: Copyright © 2016 - 2026 Daniel Quinn, Jonas Winkler, and the Paperless-ngx team
+copyright: Copyright © 2016 - 2023 Daniel Quinn, Jonas Winkler, and the Paperless-ngx team
 extra:
   social:
     - icon: fontawesome/brands/github

paperless.conf.example

@@ -55,10 +55,10 @@
 #PAPERLESS_TASK_WORKERS=1
 #PAPERLESS_THREADS_PER_WORKER=1
 #PAPERLESS_TIME_ZONE=UTC
-#PAPERLESS_CONSUMER_POLLING_INTERVAL=10
+#PAPERLESS_CONSUMER_POLLING=10
 #PAPERLESS_CONSUMER_DELETE_DUPLICATES=false
 #PAPERLESS_CONSUMER_RECURSIVE=false
-#PAPERLESS_CONSUMER_IGNORE_PATTERNS=[]  # Defaults are built in; add filename regexes, e.g. ["^\\.DS_Store$", "^desktop\\.ini$"]
+#PAPERLESS_CONSUMER_IGNORE_PATTERNS=[".DS_STORE/*", "._*", ".stfolder/*", ".stversions/*", ".localized/*", "desktop.ini"]
 #PAPERLESS_CONSUMER_SUBDIRS_AS_TAGS=false
 #PAPERLESS_CONSUMER_ENABLE_BARCODES=false
 #PAPERLESS_CONSUMER_BARCODE_STRING=PATCHT

pyproject.toml

@@ -16,19 +16,18 @@ classifiers = [
 # This will allow testing to not install a webserver, mysql, etc
 
 dependencies = [
-  "azure-ai-documentintelligence>=1.0.2",
   "babel>=2.17",
   "bleach~=6.3.0",
-  "celery[redis]~=5.6.2",
+  "celery[redis]~=5.5.1",
   "channels~=4.2",
   "channels-redis~=4.2",
   "concurrent-log-handler~=0.9.25",
   "dateparser~=1.2",
   # WARNING: django does not use semver.
   #          Only patch versions are guaranteed to not introduce breaking changes.
-  "django~=5.2.10",
-  "django-allauth[mfa,socialaccount]~=65.13.1",
-  "django-auditlog~=3.4.1",
+  "django~=5.2.5",
+  "django-allauth[mfa,socialaccount]~=65.12.1",
+  "django-auditlog~=3.3.0",
   "django-cachalot~=2.8.0",
   "django-celery-results~=2.6.0",
   "django-compression-middleware~=0.5.0",
@@ -44,23 +43,16 @@ dependencies = [
   "drf-spectacular~=0.28",
   "drf-spectacular-sidecar~=2025.10.1",
   "drf-writable-nested~=0.7.1",
-  "faiss-cpu>=1.10",
   "filelock~=3.20.0",
   "flower~=2.0.1",
-  "gotenberg-client~=0.13.1",
+  "gotenberg-client~=0.12.0",
   "httpx-oauth~=0.16",
   "imap-tools~=1.11.0",
+  "inotifyrecursive~=0.3",
   "jinja2~=3.1.5",
   "langdetect~=1.0.9",
-  "llama-index-core>=0.14.12",
-  "llama-index-embeddings-huggingface>=0.6.1",
-  "llama-index-embeddings-openai>=0.5.1",
-  "llama-index-llms-ollama>=0.9.1",
-  "llama-index-llms-openai>=0.6.13",
-  "llama-index-vector-stores-faiss>=0.5.2",
   "nltk~=3.9.1",
-  "ocrmypdf~=16.13.0",
-  "openai>=1.76",
+  "ocrmypdf~=16.12.0",
   "pathvalidate~=3.3.1",
   "pdf2image~=1.17.0",
   "python-dateutil~=2.9.0",
@@ -73,13 +65,11 @@ dependencies = [
   "redis[hiredis]~=5.2.1",
   "regex>=2025.9.18",
   "scikit-learn~=1.7.0",
-  "sentence-transformers>=4.1",
   "setproctitle~=1.3.4",
   "tika-client~=0.10.0",
-  "torch~=2.9.1",
   "tqdm~=4.67.1",
-  "watchfiles>=1.1.1",
-  "whitenoise~=6.11",
+  "watchdog~=6.0",
+  "whitenoise~=6.9",
   "whoosh-reloaded>=2.7.5",
   "zxing-cpp~=2.3.0",
 ]
@@ -88,13 +78,13 @@ optional-dependencies.mariadb = [
   "mysqlclient~=2.2.7",
 ]
 optional-dependencies.postgres = [
-  "psycopg[c,pool]==3.3",
+  "psycopg[c,pool]==3.2.12",
   # Direct dependency for proper resolution of the pre-built wheels
-  "psycopg-c==3.3",
-  "psycopg-pool==3.3",
+  "psycopg-c==3.2.12",
+  "psycopg-pool==3.2.7",
 ]
 optional-dependencies.webserver = [
-  "granian[uvloop]~=2.6.0",
+  "granian[uvloop]~=2.5.1",
 ]
 
 [dependency-groups]
@@ -114,20 +104,19 @@ testing = [
   "daphne",
   "factory-boy~=3.3.1",
   "imagehash",
-  "pytest~=9.0.0",
+  "pytest~=8.4.1",
   "pytest-cov~=7.0.0",
   "pytest-django~=4.11.1",
-  "pytest-env~=1.2.0",
+  "pytest-env",
   "pytest-httpx",
-  "pytest-mock~=3.15.1",
-  #"pytest-randomly~=4.0.1",
-  "pytest-rerunfailures~=16.1",
+  "pytest-mock",
+  "pytest-rerunfailures",
   "pytest-sugar",
-  "pytest-xdist~=3.8.0",
+  "pytest-xdist",
 ]
 
 lint = [
-  "pre-commit~=4.5.1",
+  "pre-commit~=4.4.0",
   "pre-commit-uv~=4.2.0",
   "ruff~=0.14.0",
 ]
@@ -152,7 +141,7 @@ typing = [
 ]
 
 [tool.uv]
-required-version = ">=0.9.0"
+required-version = ">=0.5.14"
 package = false
 environments = [
   "sys_platform == 'darwin'",
@@ -162,23 +151,14 @@ environments = [
 [tool.uv.sources]
 # Markers are chosen to select these almost exclusively when building the Docker image
 psycopg-c = [
-  { url = "https://github.com/paperless-ngx/builder/releases/download/psycopg-trixie-3.3.0/psycopg_c-3.3.0-cp312-cp312-linux_x86_64.whl", marker = "sys_platform == 'linux' and platform_machine == 'x86_64' and python_version == '3.12'" },
-  { url = "https://github.com/paperless-ngx/builder/releases/download/psycopg-trixie-3.3.0/psycopg_c-3.3.0-cp312-cp312-linux_aarch64.whl", marker = "sys_platform == 'linux' and platform_machine == 'aarch64' and python_version == '3.12'" },
+  { url = "https://github.com/paperless-ngx/builder/releases/download/psycopg-bookworm-3.2.12/psycopg_c-3.2.12-cp312-cp312-linux_x86_64.whl", marker = "sys_platform == 'linux' and platform_machine == 'x86_64' and python_version == '3.12'" },
+  { url = "https://github.com/paperless-ngx/builder/releases/download/psycopg-bookworm-3.2.12/psycopg_c-3.2.12-cp312-cp312-linux_aarch64.whl", marker = "sys_platform == 'linux' and platform_machine == 'aarch64' and python_version == '3.12'" },
 ]
 zxing-cpp = [
   { url = "https://github.com/paperless-ngx/builder/releases/download/zxing-2.3.0/zxing_cpp-2.3.0-cp312-cp312-linux_x86_64.whl", marker = "sys_platform == 'linux' and platform_machine == 'x86_64' and python_version == '3.12'" },
   { url = "https://github.com/paperless-ngx/builder/releases/download/zxing-2.3.0/zxing_cpp-2.3.0-cp312-cp312-linux_aarch64.whl", marker = "sys_platform == 'linux' and platform_machine == 'aarch64' and python_version == '3.12'" },
 ]
 
-torch = [
-  { index = "pytorch-cpu" },
-]
-
-[[tool.uv.index]]
-name = "pytorch-cpu"
-url = "https://download.pytorch.org/whl/cpu"
-explicit = true
-
 [tool.ruff]
 target-version = "py310"
 line-length = 88
@@ -261,15 +241,11 @@ write-changes = true
 ignore-words-list = "criterias,afterall,valeu,ureue,equest,ure,assertIn,Oktober,commitish"
 skip = "src-ui/src/locale/*,src-ui/pnpm-lock.yaml,src-ui/e2e/*,src/paperless_mail/tests/samples/*,src/documents/tests/samples/*,*.po,*.json"
 
-[tool.pytest]
-minversion = "9.0"
-pythonpath = [ "src" ]
-
-strict_config = true
-strict_markers = true
-strict_parametrization_ids = true
-strict_xfail = true
-
+[tool.pytest.ini_options]
+minversion = "8.0"
+pythonpath = [
+  "src",
+]
 testpaths = [
   "src/documents/tests/",
   "src/paperless/tests/",
@@ -277,10 +253,7 @@ testpaths = [
   "src/paperless_tesseract/tests/",
   "src/paperless_tika/tests",
   "src/paperless_text/tests/",
-  "src/paperless_remote/tests/",
-  "src/paperless_ai/tests",
 ]
-
 addopts = [
   "--pythonwarnings=all",
   "--cov",
@@ -288,27 +261,15 @@ addopts = [
   "--cov-report=xml",
   "--numprocesses=auto",
   "--maxprocesses=16",
-  "--dist=loadscope",
+  "--quiet",
   "--durations=50",
-  "--durations-min=0.5",
   "--junitxml=junit.xml",
-  "-o",
-  "junit_family=legacy",
+  "-o junit_family=legacy",
 ]
-
 norecursedirs = [ "src/locale/", ".venv/", "src-ui/" ]
 
 DJANGO_SETTINGS_MODULE = "paperless.settings"
 
-markers = [
-  "live: Integration tests requiring external services (Gotenberg, Tika, nginx, etc)",
-  "nginx: Tests that make HTTP requests to the local nginx service",
-  "gotenberg: Tests requiring Gotenberg service",
-  "tika: Tests requiring Tika service",
-  "greenmail: Tests requiring Greenmail service",
-  "date_parsing: Tests which cover date parsing from content or filename",
-]
-
 [tool.pytest_env]
 PAPERLESS_DISABLE_DBHANDLER = "true"
 PAPERLESS_CACHE_BACKEND = "django.core.cache.backends.locmem.LocMemCache"
@@ -333,10 +294,6 @@ exclude_also = [
 
 [tool.mypy]
 mypy_path = "src"
-files = [
-  "src/documents/plugins/date_parsing",
-  "src/documents/tests/date_parsing",
-]
 plugins = [
   "mypy_django_plugin.main",
   "mypy_drf_plugin.main",
@@ -348,28 +305,5 @@ disallow_untyped_defs = true
 warn_redundant_casts = true
 warn_unused_ignores = true
 
-# This prevents errors from imports, but allows type-checking logic to work
-follow_imports = "silent"
-
-[[tool.mypy.overrides]]
-module = [
-  "documents.*",
-  "paperless.*",
-  "paperless_ai.*",
-  "paperless_mail.*",
-  "paperless_tesseract.*",
-  "paperless_remote.*",
-  "paperless_text.*",
-  "paperless_tika.*",
-]
-ignore_errors = true
-
-[[tool.mypy.overrides]]
-module = [
-  "documents.plugins.date_parsing.*",
-  "documents.tests.date_parsing.*",
-]
-ignore_errors = false
-
 [tool.django-stubs]
 django_settings_module = "paperless.settings"

src-ui/angular.json

@@ -31,7 +31,6 @@
           "fi-FI": "src/locale/messages.fi_FI.xlf",
           "fr-FR": "src/locale/messages.fr_FR.xlf",
           "hu-HU": "src/locale/messages.hu_HU.xlf",
-          "id-ID": "src/locale/messages.id_ID.xlf",
           "it-IT": "src/locale/messages.it_IT.xlf",
           "ja-JP": "src/locale/messages.ja_JP.xlf",
           "lb-LU": "src/locale/messages.lb_LU.xlf",
@@ -156,7 +155,16 @@
           "builder": "@angular-builders/jest:run",
           "options": {
             "tsConfig": "tsconfig.spec.json",
-            "zoneless": false
+            "assets": [
+              "src/favicon.ico",
+              "src/apple-touch-icon.png",
+              "src/assets",
+              "src/manifest.webmanifest"
+            ],
+            "styles": [
+              "src/styles.scss"
+            ],
+            "scripts": []
           }
         },
         "lint": {

src-ui/jest.config.js

@@ -1,23 +1,5 @@
-const { createEsmPreset } = require('jest-preset-angular/presets')
-
-const esmPreset = createEsmPreset({
-  tsconfig: '<rootDir>/tsconfig.spec.json',
-  stringifyContentPathRegex: '\\.(html|svg)$',
-})
-
 module.exports = {
-  ...esmPreset,
-  transform: {
-    ...esmPreset.transform,
-    '^.+\\.(ts|js|mjs|html|svg)$': [
-      'jest-preset-angular',
-      {
-        tsconfig: '<rootDir>/tsconfig.spec.json',
-        stringifyContentPathRegex: '\\.(html|svg)$',
-        useESM: true,
-      },
-    ],
-  },
+  preset: 'jest-preset-angular',
   setupFilesAfterEnv: ['<rootDir>/setup-jest.ts'],
   testPathIgnorePatterns: [
     '/node_modules/',
@@ -26,10 +8,9 @@ module.exports = {
     'abstract-paperless-service',
   ],
   transformIgnorePatterns: [
-    'node_modules/(?!.*(\\.mjs$|tslib|lodash-es|@angular/common/locales/.*\\.js$))',
+    `<rootDir>/node_modules/.pnpm/(?!.*\\.mjs$|lodash-es|@angular\\+common.*locales)`,
   ],
   moduleNameMapper: {
-    ...esmPreset.moduleNameMapper,
     '^src/(.*)': '<rootDir>/src/$1',
   },
   workerIdleMemoryLimit: '512MB',

src-ui/package.json

@@ -11,17 +11,17 @@
   },
   "private": true,
   "dependencies": {
-    "@angular/cdk": "^21.0.6",
-    "@angular/common": "~21.0.8",
-    "@angular/compiler": "~21.0.8",
-    "@angular/core": "~21.0.8",
-    "@angular/forms": "~21.0.8",
-    "@angular/localize": "~21.0.8",
-    "@angular/platform-browser": "~21.0.8",
-    "@angular/platform-browser-dynamic": "~21.0.8",
-    "@angular/router": "~21.0.8",
-    "@ng-bootstrap/ng-bootstrap": "^20.0.0",
-    "@ng-select/ng-select": "^21.1.4",
+    "@angular/cdk": "^20.2.13",
+    "@angular/common": "~20.3.15",
+    "@angular/compiler": "~20.3.15",
+    "@angular/core": "~20.3.15",
+    "@angular/forms": "~20.3.15",
+    "@angular/localize": "~20.3.15",
+    "@angular/platform-browser": "~20.3.15",
+    "@angular/platform-browser-dynamic": "~20.3.15",
+    "@angular/router": "~20.3.15",
+    "@ng-bootstrap/ng-bootstrap": "^19.0.1",
+    "@ng-select/ng-select": "^20.7.0",
     "@ngneat/dirty-check-forms": "^3.0.3",
     "@popperjs/core": "^2.11.8",
     "bootstrap": "^5.3.8",
@@ -30,8 +30,8 @@
     "ng2-pdf-viewer": "^10.4.0",
     "ngx-bootstrap-icons": "^1.9.3",
     "ngx-color": "^10.1.0",
-    "ngx-cookie-service": "^21.1.0",
-    "ngx-device-detector": "^11.0.0",
+    "ngx-cookie-service": "^20.1.1",
+    "ngx-device-detector": "^10.1.0",
     "ngx-ui-tour-ng-bootstrap": "^17.0.1",
     "rxjs": "^7.8.2",
     "tslib": "^2.8.1",
@@ -40,18 +40,18 @@
     "zone.js": "^0.15.1"
   },
   "devDependencies": {
-    "@angular-builders/custom-webpack": "^21.0.0-beta.1",
-    "@angular-builders/jest": "^21.0.0-beta.1",
-    "@angular-devkit/core": "^21.0.5",
-    "@angular-devkit/schematics": "^21.0.5",
-    "@angular-eslint/builder": "21.1.0",
-    "@angular-eslint/eslint-plugin": "21.1.0",
-    "@angular-eslint/eslint-plugin-template": "21.1.0",
-    "@angular-eslint/schematics": "21.1.0",
-    "@angular-eslint/template-parser": "21.1.0",
-    "@angular/build": "^21.0.5",
-    "@angular/cli": "~21.0.5",
-    "@angular/compiler-cli": "~21.0.8",
+    "@angular-builders/custom-webpack": "^20.0.0",
+    "@angular-builders/jest": "^20.0.0",
+    "@angular-devkit/core": "^20.3.13",
+    "@angular-devkit/schematics": "^20.3.13",
+    "@angular-eslint/builder": "20.6.0",
+    "@angular-eslint/eslint-plugin": "20.6.0",
+    "@angular-eslint/eslint-plugin-template": "20.6.0",
+    "@angular-eslint/schematics": "20.6.0",
+    "@angular-eslint/template-parser": "20.6.0",
+    "@angular/build": "^20.3.13",
+    "@angular/cli": "~20.3.13",
+    "@angular/compiler-cli": "~20.3.15",
     "@codecov/webpack-plugin": "^1.9.1",
     "@playwright/test": "^1.57.0",
     "@types/jest": "^30.0.0",
@@ -63,11 +63,11 @@
     "jest": "30.2.0",
     "jest-environment-jsdom": "^30.2.0",
     "jest-junit": "^16.0.0",
-    "jest-preset-angular": "^16.0.0",
+    "jest-preset-angular": "^15.0.3",
     "jest-websocket-mock": "^2.5.0",
     "prettier-plugin-organize-imports": "^4.3.0",
     "ts-node": "~10.9.1",
-    "typescript": "^5.9.3",
+    "typescript": "^5.8.3",
     "webpack": "^5.103.0"
   },
   "packageManager": "pnpm@10.17.1",

src-ui/setup-jest.ts

@@ -28,7 +28,6 @@ import localeFa from '@angular/common/locales/fa'
 import localeFi from '@angular/common/locales/fi'
 import localeFr from '@angular/common/locales/fr'
 import localeHu from '@angular/common/locales/hu'
-import localeId from '@angular/common/locales/id'
 import localeIt from '@angular/common/locales/it'
 import localeJa from '@angular/common/locales/ja'
 import localeKo from '@angular/common/locales/ko'
@@ -64,7 +63,6 @@ registerLocaleData(localeFa)
 registerLocaleData(localeFi)
 registerLocaleData(localeFr)
 registerLocaleData(localeHu)
-registerLocaleData(localeId)
 registerLocaleData(localeIt)
 registerLocaleData(localeJa)
 registerLocaleData(localeKo)

src-ui/src/app/components/admin/config/config.component.html

@@ -35,12 +35,8 @@
                                                     @case (ConfigOptionType.String) { <pngx-input-text [formControlName]="option.key" [error]="errors[option.key]"></pngx-input-text> }
                                                     @case (ConfigOptionType.JSON) { <pngx-input-text [formControlName]="option.key" [error]="errors[option.key]"></pngx-input-text> }
                                                     @case (ConfigOptionType.File) { <pngx-input-file [formControlName]="option.key" (upload)="uploadFile($event, option.key)" [error]="errors[option.key]"></pngx-input-file> }
-                                                    @case (ConfigOptionType.Password) { <pngx-input-password [formControlName]="option.key" [error]="errors[option.key]"></pngx-input-password> }
                                                 }
                                             </div>
-                                            @if (option.note) {
-                                                <div class="form-text fst-italic">{{option.note}}</div>
-                                            }
                                         </div>
                                     </div>
                                 </div>

src-ui/src/app/components/admin/config/config.component.ts

@@ -29,7 +29,6 @@ import { SettingsService } from 'src/app/services/settings.service'
 import { ToastService } from 'src/app/services/toast.service'
 import { FileComponent } from '../../common/input/file/file.component'
 import { NumberComponent } from '../../common/input/number/number.component'
-import { PasswordComponent } from '../../common/input/password/password.component'
 import { SelectComponent } from '../../common/input/select/select.component'
 import { SwitchComponent } from '../../common/input/switch/switch.component'
 import { TextComponent } from '../../common/input/text/text.component'
@@ -47,7 +46,6 @@ import { LoadingComponentWithPermissions } from '../../loading-component/loading
     TextComponent,
     NumberComponent,
     FileComponent,
-    PasswordComponent,
     AsyncPipe,
     NgbNavModule,
     FormsModule,

src-ui/src/app/components/admin/settings/settings.component.html

@@ -103,6 +103,22 @@
             </div>
 
             <div class="row mb-3">
+              <div class="col-md-3 col-form-label pt-0">
+                <span i18n>Items per page</span>
+              </div>
+              <div class="col">
+
+                <select class="form-select" formControlName="documentListItemPerPage">
+                  <option [ngValue]="10">10</option>
+                  <option [ngValue]="25">25</option>
+                  <option [ngValue]="50">50</option>
+                  <option [ngValue]="100">100</option>
+                </select>
+
+              </div>
+            </div>
+
+            <div class="row">
               <div class="col-md-3 col-form-label pt-0">
                 <span i18n>Sidebar</span>
               </div>
@@ -137,28 +153,8 @@
                 </button>
               </div>
             </div>
-          </div>
-          <div class="col-xl-6 ps-xl-5">
-            <h5 class="mt-3 mt-md-0" i18n>Global search</h5>
-            <div class="row">
-              <div class="col">
-                <pngx-input-check i18n-title title="Do not include advanced search results" formControlName="searchDbOnly"></pngx-input-check>
-              </div>
-            </div>
 
-            <div class="row mb-3">
-              <div class="col-md-3 col-form-label pt-0">
-                <span i18n>Full search links to</span>
-              </div>
-              <div class="col mb-3">
-                <select class="form-select" formControlName="searchLink">
-                  <option [ngValue]="GlobalSearchType.TITLE_CONTENT" i18n>Title and content search</option>
-                  <option [ngValue]="GlobalSearchType.ADVANCED" i18n>Advanced search</option>
-                </select>
-              </div>
-            </div>
-
-            <h5 class="mt-3 mt-md-0" id="update-checking" i18n>Update checking</h5>
+            <h5 class="mt-3" id="update-checking" i18n>Update checking</h5>
             <div class="row mb-3">
               <div class="col d-flex flex-row align-items-start">
                 <pngx-input-check i18n-title title="Enable update checking" formControlName="updateCheckingEnabled"></pngx-input-check>
@@ -183,33 +179,11 @@
                 <pngx-input-check i18n-title title="Show document counts in sidebar saved views" formControlName="sidebarViewsShowCount"></pngx-input-check>
               </div>
             </div>
+
           </div>
-        </div>
+          <div class="col-xl-6 ps-xl-5">
+            <h5 class="mt-3 mt-md-0" i18n>Document editing</h5>
 
-      </ng-template>
-    </li>
-
-    <li [ngbNavItem]="SettingsNavIDs.Documents">
-      <a ngbNavLink i18n>Documents</a>
-      <ng-template ngbNavContent>
-        <div class="row">
-          <div class="col-xl-6 pe-xl-5">
-            <h5 i18n>Documents</h5>
-            <div class="row mb-3">
-              <div class="col-md-3 col-form-label pt-0">
-                <span i18n>Items per page</span>
-              </div>
-              <div class="col">
-                <select class="form-select" formControlName="documentListItemPerPage">
-                  <option [ngValue]="10">10</option>
-                  <option [ngValue]="25">25</option>
-                  <option [ngValue]="50">50</option>
-                  <option [ngValue]="100">100</option>
-                </select>
-              </div>
-            </div>
-
-            <h5 class="mt-3" i18n>Document editing</h5>
             <div class="row">
               <div class="col">
                 <pngx-input-check i18n-title title="Use PDF viewer provided by the browser" i18n-hint hint="This is usually faster for displaying large PDF documents, but it might not work on some browsers." formControlName="useNativePdfViewer"></pngx-input-check>
@@ -235,32 +209,31 @@
               </div>
             </div>
 
-            <div class="row">
+            <div class="row mb-3">
               <div class="col">
                 <pngx-input-check i18n-title title="Show document thumbnail during loading" formControlName="documentEditingOverlayThumbnail"></pngx-input-check>
               </div>
             </div>
 
-            <div class="row mb-3">
+            <h5 class="mt-3" i18n>Global search</h5>
+            <div class="row">
               <div class="col">
-                <p class="mb-2" i18n>Built-in fields to show:</p>
-                @for (option of documentDetailFieldOptions; track option.id) {
-                  <div class="form-check ms-3">
-                    <input class="form-check-input" type="checkbox"
-                      [id]="'documentDetailField-' + option.id"
-                      [checked]="isDocumentDetailFieldShown(option.id)"
-                      (change)="toggleDocumentDetailField(option.id, $event.target.checked)" />
-                    <label class="form-check-label" [for]="'documentDetailField-' + option.id">
-                      {{ option.label }}
-                    </label>
-                  </div>
-                }
-                <p class="small text-muted mt-1" i18n>Uncheck fields to hide them on the document details page.</p>
+                <pngx-input-check i18n-title title="Do not include advanced search results" formControlName="searchDbOnly"></pngx-input-check>
+              </div>
+            </div>
+
+            <div class="row mb-3">
+              <div class="col-md-3 col-form-label pt-0">
+                <span i18n>Full search links to</span>
+              </div>
+              <div class="col mb-3">
+                <select class="form-select" formControlName="searchLink">
+                  <option [ngValue]="GlobalSearchType.TITLE_CONTENT" i18n>Title and content search</option>
+                  <option [ngValue]="GlobalSearchType.ADVANCED" i18n>Advanced search</option>
+                </select>
               </div>
             </div>
-          </div>
 
-          <div class="col-xl-6 ps-xl-5">
             <h5 class="mt-3" i18n>Bulk editing</h5>
             <div class="row mb-3">
               <div class="col">
@@ -269,27 +242,16 @@
               </div>
             </div>
 
-            <h5 class="mt-3" i18n>PDF Editor</h5>
-            <div class="row">
-              <div class="col-md-3 col-form-label pt-0">
-                <span i18n>Default editing mode</span>
-              </div>
-              <div class="col">
-                <select class="form-select" formControlName="pdfEditorDefaultEditMode">
-                  <option [ngValue]="PdfEditorEditMode.Create" i18n>Create new document(s)</option>
-                  <option [ngValue]="PdfEditorEditMode.Update" i18n>Update existing document</option>
-                </select>
-              </div>
-            </div>
-
             <h5 class="mt-3" i18n>Notes</h5>
             <div class="row mb-3">
               <div class="col">
                 <pngx-input-check i18n-title title="Enable notes" formControlName="notesEnabled"></pngx-input-check>
               </div>
             </div>
+
           </div>
         </div>
+
       </ng-template>
     </li>
 

src-ui/src/app/components/admin/settings/settings.component.spec.ts

@@ -91,9 +91,6 @@ const status: SystemStatus = {
     sanity_check_status: SystemStatusItemStatus.ERROR,
     sanity_check_last_run: new Date().toISOString(),
     sanity_check_error: 'Error running sanity check.',
-    llmindex_status: SystemStatusItemStatus.DISABLED,
-    llmindex_last_modified: new Date().toISOString(),
-    llmindex_error: null,
   },
 }
 
@@ -201,9 +198,9 @@ describe('SettingsComponent', () => {
     const navigateSpy = jest.spyOn(router, 'navigate')
     const tabButtons = fixture.debugElement.queryAll(By.directive(NgbNavLink))
     tabButtons[1].nativeElement.dispatchEvent(new MouseEvent('click'))
-    expect(navigateSpy).toHaveBeenCalledWith(['settings', 'documents'])
-    tabButtons[2].nativeElement.dispatchEvent(new MouseEvent('click'))
     expect(navigateSpy).toHaveBeenCalledWith(['settings', 'permissions'])
+    tabButtons[2].nativeElement.dispatchEvent(new MouseEvent('click'))
+    expect(navigateSpy).toHaveBeenCalledWith(['settings', 'notifications'])
 
     const initSpy = jest.spyOn(component, 'initialize')
     component.isDirty = true // mock dirty
@@ -213,8 +210,8 @@ describe('SettingsComponent', () => {
     expect(initSpy).not.toHaveBeenCalled()
 
     navigateSpy.mockResolvedValueOnce(true) // nav accepted even though dirty
-    tabButtons[2].nativeElement.dispatchEvent(new MouseEvent('click'))
-    expect(navigateSpy).toHaveBeenCalledWith(['settings', 'permissions'])
+    tabButtons[1].nativeElement.dispatchEvent(new MouseEvent('click'))
+    expect(navigateSpy).toHaveBeenCalledWith(['settings', 'notifications'])
     expect(initSpy).toHaveBeenCalled()
   })
 
@@ -226,7 +223,7 @@ describe('SettingsComponent', () => {
     activatedRoute.snapshot.fragment = '#notifications'
     const scrollSpy = jest.spyOn(viewportScroller, 'scrollToAnchor')
     component.ngOnInit()
-    expect(component.activeNavID).toEqual(4) // Notifications
+    expect(component.activeNavID).toEqual(3) // Notifications
     component.ngAfterViewInit()
     expect(scrollSpy).toHaveBeenCalledWith('#notifications')
   })
@@ -251,7 +248,7 @@ describe('SettingsComponent', () => {
     expect(toastErrorSpy).toHaveBeenCalled()
     expect(storeSpy).toHaveBeenCalled()
     expect(appearanceSettingsSpy).not.toHaveBeenCalled()
-    expect(setSpy).toHaveBeenCalledTimes(32)
+    expect(setSpy).toHaveBeenCalledTimes(30)
 
     // succeed
     storeSpy.mockReturnValueOnce(of(true))
@@ -366,22 +363,4 @@ describe('SettingsComponent', () => {
     settingsService.settingsSaved.emit(true)
     expect(maybeRefreshSpy).toHaveBeenCalled()
   })
-
-  it('should support toggling document detail fields', () => {
-    completeSetup()
-    const field = 'storage_path'
-    expect(
-      component.settingsForm.get('documentDetailsHiddenFields').value.length
-    ).toEqual(0)
-    component.toggleDocumentDetailField(field, false)
-    expect(
-      component.settingsForm.get('documentDetailsHiddenFields').value.length
-    ).toEqual(1)
-    expect(component.isDocumentDetailFieldShown(field)).toBeFalsy()
-    component.toggleDocumentDetailField(field, true)
-    expect(
-      component.settingsForm.get('documentDetailsHiddenFields').value.length
-    ).toEqual(0)
-    expect(component.isDocumentDetailFieldShown(field)).toBeTruthy()
-  })
 })

src-ui/src/app/components/admin/settings/settings.component.ts

@@ -64,16 +64,15 @@ import { PermissionsGroupComponent } from '../../common/input/permissions/permis
 import { PermissionsUserComponent } from '../../common/input/permissions/permissions-user/permissions-user.component'
 import { SelectComponent } from '../../common/input/select/select.component'
 import { PageHeaderComponent } from '../../common/page-header/page-header.component'
-import { PdfEditorEditMode } from '../../common/pdf-editor/pdf-editor-edit-mode'
 import { SystemStatusDialogComponent } from '../../common/system-status-dialog/system-status-dialog.component'
-import { ZoomSetting } from '../../document-detail/zoom-setting'
+import { ZoomSetting } from '../../document-detail/document-detail.component'
 import { ComponentWithPermissions } from '../../with-permissions/with-permissions.component'
 
 enum SettingsNavIDs {
   General = 1,
-  Documents = 2,
-  Permissions = 3,
-  Notifications = 4,
+  Permissions = 2,
+  Notifications = 3,
+  SavedViews = 4,
 }
 
 const systemLanguage = { code: '', name: $localize`Use system language` }
@@ -82,25 +81,6 @@ const systemDateFormat = {
   name: $localize`Use date format of display language`,
 }
 
-export enum DocumentDetailFieldID {
-  ArchiveSerialNumber = 'archive_serial_number',
-  Correspondent = 'correspondent',
-  DocumentType = 'document_type',
-  StoragePath = 'storage_path',
-  Tags = 'tags',
-}
-
-const documentDetailFieldOptions = [
-  {
-    id: DocumentDetailFieldID.ArchiveSerialNumber,
-    label: $localize`Archive serial number`,
-  },
-  { id: DocumentDetailFieldID.Correspondent, label: $localize`Correspondent` },
-  { id: DocumentDetailFieldID.DocumentType, label: $localize`Document type` },
-  { id: DocumentDetailFieldID.StoragePath, label: $localize`Storage path` },
-  { id: DocumentDetailFieldID.Tags, label: $localize`Tags` },
-]
-
 @Component({
   selector: 'pngx-settings',
   templateUrl: './settings.component.html',
@@ -164,10 +144,8 @@ export class SettingsComponent
     defaultPermsEditGroups: new FormControl(null),
     useNativePdfViewer: new FormControl(null),
     pdfViewerDefaultZoom: new FormControl(null),
-    pdfEditorDefaultEditMode: new FormControl(null),
     documentEditingRemoveInboxTags: new FormControl(null),
     documentEditingOverlayThumbnail: new FormControl(null),
-    documentDetailsHiddenFields: new FormControl([]),
     searchDbOnly: new FormControl(null),
     searchLink: new FormControl(null),
 
@@ -198,10 +176,6 @@ export class SettingsComponent
 
   public readonly ZoomSetting = ZoomSetting
 
-  public readonly PdfEditorEditMode = PdfEditorEditMode
-
-  public readonly documentDetailFieldOptions = documentDetailFieldOptions
-
   get systemStatusHasErrors(): boolean {
     return (
       this.systemStatus.database.status === SystemStatusItemStatus.ERROR ||
@@ -318,9 +292,6 @@ export class SettingsComponent
       pdfViewerDefaultZoom: this.settings.get(
         SETTINGS_KEYS.PDF_VIEWER_ZOOM_SETTING
       ),
-      pdfEditorDefaultEditMode: this.settings.get(
-        SETTINGS_KEYS.PDF_EDITOR_DEFAULT_EDIT_MODE
-      ),
       displayLanguage: this.settings.getLanguage(),
       dateLocale: this.settings.get(SETTINGS_KEYS.DATE_LOCALE),
       dateFormat: this.settings.get(SETTINGS_KEYS.DATE_FORMAT),
@@ -365,9 +336,6 @@ export class SettingsComponent
       documentEditingOverlayThumbnail: this.settings.get(
         SETTINGS_KEYS.DOCUMENT_EDITING_OVERLAY_THUMBNAIL
       ),
-      documentDetailsHiddenFields: this.settings.get(
-        SETTINGS_KEYS.DOCUMENT_DETAILS_HIDDEN_FIELDS
-      ),
       searchDbOnly: this.settings.get(SETTINGS_KEYS.SEARCH_DB_ONLY),
       searchLink: this.settings.get(SETTINGS_KEYS.SEARCH_FULL_TYPE),
     }
@@ -490,10 +458,6 @@ export class SettingsComponent
       SETTINGS_KEYS.PDF_VIEWER_ZOOM_SETTING,
       this.settingsForm.value.pdfViewerDefaultZoom
     )
-    this.settings.set(
-      SETTINGS_KEYS.PDF_EDITOR_DEFAULT_EDIT_MODE,
-      this.settingsForm.value.pdfEditorDefaultEditMode
-    )
     this.settings.set(
       SETTINGS_KEYS.DATE_LOCALE,
       this.settingsForm.value.dateLocale
@@ -562,10 +526,6 @@ export class SettingsComponent
       SETTINGS_KEYS.DOCUMENT_EDITING_OVERLAY_THUMBNAIL,
       this.settingsForm.value.documentEditingOverlayThumbnail
     )
-    this.settings.set(
-      SETTINGS_KEYS.DOCUMENT_DETAILS_HIDDEN_FIELDS,
-      this.settingsForm.value.documentDetailsHiddenFields
-    )
     this.settings.set(
       SETTINGS_KEYS.SEARCH_DB_ONLY,
       this.settingsForm.value.searchDbOnly
@@ -627,26 +587,6 @@ export class SettingsComponent
     this.settingsForm.get('themeColor').patchValue('')
   }
 
-  isDocumentDetailFieldShown(fieldId: string): boolean {
-    const hiddenFields =
-      this.settingsForm.value.documentDetailsHiddenFields || []
-    return !hiddenFields.includes(fieldId)
-  }
-
-  toggleDocumentDetailField(fieldId: string, checked: boolean) {
-    const hiddenFields = new Set(
-      this.settingsForm.value.documentDetailsHiddenFields || []
-    )
-    if (checked) {
-      hiddenFields.delete(fieldId)
-    } else {
-      hiddenFields.add(fieldId)
-    }
-    this.settingsForm
-      .get('documentDetailsHiddenFields')
-      .setValue(Array.from(hiddenFields))
-  }
-
   showSystemStatus() {
     const modal: NgbModalRef = this.modalService.open(
       SystemStatusDialogComponent,

src-ui/src/app/components/admin/tasks/tasks.component.html

@@ -97,12 +97,6 @@
                   <br/><em>(<ng-container i18n>click for full output</ng-container>)</em>
                 }
               </ng-template>
-              @if (task.duplicate_documents?.length > 0) {
-                <div class="small text-warning-emphasis d-flex align-items-center gap-1">
-                  <i-bs class="lh-1" width="1em" height="1em" name="exclamation-triangle"></i-bs>
-                  <span i18n>Duplicate(s) detected</span>
-                </div>
-              }
             </td>
           }
           <td class="d-lg-none">

src-ui/src/app/components/app-frame/app-frame.component.html

@@ -30,9 +30,6 @@
     </div>
   </div>
   <ul ngbNav class="order-sm-3">
-    @if (aiEnabled) {
-      <pngx-chat></pngx-chat>
-    }
     <pngx-toasts-dropdown></pngx-toasts-dropdown>
     <li ngbDropdown class="nav-item dropdown">
       <button class="btn ps-1 border-0" id="userDropdown" ngbDropdownToggle>

src-ui/src/app/components/app-frame/app-frame.component.scss

@@ -248,7 +248,7 @@ main {
   }
 }
 
-@media screen and (min-width: 376px) and (max-width: 768px) {
+@media screen and (min-width: 366px) and (max-width: 768px) {
   .navbar-toggler {
     // compensate for 2 buttons on the right
     margin-right: 45px;

src-ui/src/app/components/app-frame/app-frame.component.ts

@@ -44,7 +44,6 @@ import { SettingsService } from 'src/app/services/settings.service'
 import { TasksService } from 'src/app/services/tasks.service'
 import { ToastService } from 'src/app/services/toast.service'
 import { environment } from 'src/environments/environment'
-import { ChatComponent } from '../chat/chat/chat.component'
 import { ProfileEditDialogComponent } from '../common/profile-edit-dialog/profile-edit-dialog.component'
 import { DocumentDetailComponent } from '../document-detail/document-detail.component'
 import { ComponentWithPermissions } from '../with-permissions/with-permissions.component'
@@ -60,7 +59,6 @@ import { ToastsDropdownComponent } from './toasts-dropdown/toasts-dropdown.compo
     DocumentTitlePipe,
     IfPermissionsDirective,
     ToastsDropdownComponent,
-    ChatComponent,
     RouterModule,
     NgClass,
     NgbDropdownModule,
@@ -186,10 +184,6 @@ export class AppFrameComponent
       })
   }
 
-  get aiEnabled(): boolean {
-    return this.settingsService.get(SETTINGS_KEYS.AI_ENABLED)
-  }
-
   closeMenu() {
     this.isMenuCollapsed = true
   }

src-ui/src/app/components/app-frame/toasts-dropdown/toasts-dropdown.component.html

@@ -1,5 +1,5 @@
 
-<li ngbDropdown class="nav-item mx-1" (openChange)="onOpenChange($event)">
+<li ngbDropdown class="nav-item" (openChange)="onOpenChange($event)">
   @if (toasts.length) {
     <span class="badge rounded-pill z-3 pe-none bg-secondary me-2 position-absolute top-0 left-0">{{ toasts.length }}</span>
   }

src-ui/src/app/components/chat/chat/chat.component.html

@@ -1,35 +0,0 @@
-
-<li ngbDropdown class="nav-item me-n2" (openChange)="onOpenChange($event)">
-  <button class="btn border-0" id="chatDropdown" ngbDropdownToggle>
-    <i-bs width="1.3em" height="1.3em" name="chatSquareDots"></i-bs>
-  </button>
-  <div ngbDropdownMenu class="dropdown-menu-end shadow p-3" aria-labelledby="chatDropdown">
-    <div class="chat-container bg-light p-2">
-      <div class="chat-messages font-monospace small">
-        @for (message of messages; track message) {
-          <div class="message d-flex flex-row small" [class.justify-content-end]="message.role === 'user'">
-            <span class="p-2 m-2" [class.bg-dark]="message.role === 'user'">
-              {{ message.content }}
-              @if (message.isStreaming) { <span class="blinking-cursor">|</span> }
-            </span>
-          </div>
-        }
-        <div #scrollAnchor></div>
-      </div>
-
-      <form class="chat-input">
-        <div class="input-group">
-          <input
-            #chatInput
-            class="form-control form-control-sm" name="chatInput" type="text"
-            [placeholder]="placeholder"
-            [disabled]="loading"
-            [(ngModel)]="input"
-            (keydown)="searchInputKeyDown($event)"
-            />
-          <button class="btn btn-sm btn-secondary" type="button" (click)="sendMessage()" [disabled]="loading">Send</button>
-        </div>
-      </form>
-    </div>
-  </div>
-</li>

src-ui/src/app/components/chat/chat/chat.component.scss

@@ -1,37 +0,0 @@
-.dropdown-menu {
-  width: var(--pngx-toast-max-width);
-}
-
-.chat-messages {
-  max-height: 350px;
-  overflow-y: auto;
-}
-
-.dropdown-toggle::after {
-  display: none;
-}
-
-.dropdown-item {
-  white-space: initial;
-}
-
-@media screen and (max-width: 400px) {
-  :host ::ng-deep .dropdown-menu-end {
-    right: -3rem;
-  }
-}
-
-.blinking-cursor {
-  font-weight: bold;
-  font-size: 1.2em;
-  animation: blink 1s step-end infinite;
-}
-
-@keyframes blink {
-  from, to {
-    opacity: 0;
-  }
-  50% {
-    opacity: 1;
-  }
-}

src-ui/src/app/components/chat/chat/chat.component.spec.ts

@@ -1,132 +0,0 @@
-import { provideHttpClient, withInterceptorsFromDi } from '@angular/common/http'
-import { provideHttpClientTesting } from '@angular/common/http/testing'
-import { ElementRef } from '@angular/core'
-import { ComponentFixture, TestBed } from '@angular/core/testing'
-import { NavigationEnd, Router } from '@angular/router'
-import { allIcons, NgxBootstrapIconsModule } from 'ngx-bootstrap-icons'
-import { Subject } from 'rxjs'
-import { ChatService } from 'src/app/services/chat.service'
-import { ChatComponent } from './chat.component'
-
-describe('ChatComponent', () => {
-  let component: ChatComponent
-  let fixture: ComponentFixture<ChatComponent>
-  let chatService: ChatService
-  let router: Router
-  let routerEvents$: Subject<NavigationEnd>
-  let mockStream$: Subject<string>
-
-  beforeEach(async () => {
-    TestBed.configureTestingModule({
-      imports: [NgxBootstrapIconsModule.pick(allIcons), ChatComponent],
-      providers: [
-        provideHttpClient(withInterceptorsFromDi()),
-        provideHttpClientTesting(),
-      ],
-    }).compileComponents()
-
-    fixture = TestBed.createComponent(ChatComponent)
-    router = TestBed.inject(Router)
-    routerEvents$ = new Subject<any>()
-    jest
-      .spyOn(router, 'events', 'get')
-      .mockReturnValue(routerEvents$.asObservable())
-    chatService = TestBed.inject(ChatService)
-    mockStream$ = new Subject<string>()
-    jest
-      .spyOn(chatService, 'streamChat')
-      .mockReturnValue(mockStream$.asObservable())
-    component = fixture.componentInstance
-
-    jest.useFakeTimers()
-
-    fixture.detectChanges()
-
-    component.scrollAnchor.nativeElement.scrollIntoView = jest.fn()
-  })
-
-  it('should update documentId on initialization', () => {
-    jest.spyOn(router, 'url', 'get').mockReturnValue('/documents/123')
-    component.ngOnInit()
-    expect(component.documentId).toBe(123)
-  })
-
-  it('should update documentId on navigation', () => {
-    component.ngOnInit()
-    routerEvents$.next(new NavigationEnd(1, '/documents/456', '/documents/456'))
-    expect(component.documentId).toBe(456)
-  })
-
-  it('should return correct placeholder based on documentId', () => {
-    component.documentId = 123
-    expect(component.placeholder).toBe('Ask a question about this document...')
-    component.documentId = undefined
-    expect(component.placeholder).toBe('Ask a question about a document...')
-  })
-
-  it('should send a message and handle streaming response', () => {
-    component.input = 'Hello'
-    component.sendMessage()
-
-    expect(component.messages.length).toBe(2)
-    expect(component.messages[0].content).toBe('Hello')
-    expect(component.loading).toBe(true)
-
-    mockStream$.next('Hi')
-    expect(component.messages[1].content).toBe('H')
-    mockStream$.next('Hi there')
-    // advance time to process the typewriter effect
-    jest.advanceTimersByTime(1000)
-    expect(component.messages[1].content).toBe('Hi there')
-
-    mockStream$.complete()
-    expect(component.loading).toBe(false)
-    expect(component.messages[1].isStreaming).toBe(false)
-  })
-
-  it('should handle errors during streaming', () => {
-    component.input = 'Hello'
-    component.sendMessage()
-
-    mockStream$.error('Error')
-    expect(component.messages[1].content).toContain(
-      '⚠️ Error receiving response.'
-    )
-    expect(component.loading).toBe(false)
-  })
-
-  it('should enqueue typewriter chunks correctly', () => {
-    const message = { content: '', role: 'assistant', isStreaming: true }
-    component.enqueueTypewriter(null, message as any) // coverage for null
-    component.enqueueTypewriter('Hello', message as any)
-    expect(component['typewriterBuffer'].length).toBe(4)
-  })
-
-  it('should scroll to bottom after sending a message', () => {
-    const scrollSpy = jest.spyOn(
-      ChatComponent.prototype as any,
-      'scrollToBottom'
-    )
-    component.input = 'Test'
-    component.sendMessage()
-    expect(scrollSpy).toHaveBeenCalled()
-  })
-
-  it('should focus chat input when dropdown is opened', () => {
-    const focus = jest.fn()
-    component.chatInput = {
-      nativeElement: { focus: focus },
-    } as unknown as ElementRef<HTMLInputElement>
-
-    component.onOpenChange(true)
-    jest.advanceTimersByTime(15)
-    expect(focus).toHaveBeenCalled()
-  })
-
-  it('should send message on Enter key press', () => {
-    jest.spyOn(component, 'sendMessage')
-    const event = new KeyboardEvent('keydown', { key: 'Enter' })
-    component.searchInputKeyDown(event)
-    expect(component.sendMessage).toHaveBeenCalled()
-  })
-})

src-ui/src/app/components/chat/chat/chat.component.ts

@@ -1,140 +0,0 @@
-import { Component, ElementRef, inject, OnInit, ViewChild } from '@angular/core'
-import { FormsModule, ReactiveFormsModule } from '@angular/forms'
-import { NavigationEnd, Router } from '@angular/router'
-import { NgbDropdownModule } from '@ng-bootstrap/ng-bootstrap'
-import { NgxBootstrapIconsModule } from 'ngx-bootstrap-icons'
-import { filter, map } from 'rxjs'
-import { ChatMessage, ChatService } from 'src/app/services/chat.service'
-
-@Component({
-  selector: 'pngx-chat',
-  imports: [
-    FormsModule,
-    ReactiveFormsModule,
-    NgxBootstrapIconsModule,
-    NgbDropdownModule,
-  ],
-  templateUrl: './chat.component.html',
-  styleUrl: './chat.component.scss',
-})
-export class ChatComponent implements OnInit {
-  public messages: ChatMessage[] = []
-  public loading = false
-  public input: string = ''
-  public documentId!: number
-
-  private chatService: ChatService = inject(ChatService)
-  private router: Router = inject(Router)
-
-  @ViewChild('scrollAnchor') scrollAnchor!: ElementRef<HTMLDivElement>
-  @ViewChild('chatInput') chatInput!: ElementRef<HTMLInputElement>
-
-  private typewriterBuffer: string[] = []
-  private typewriterActive = false
-
-  public get placeholder(): string {
-    return this.documentId
-      ? $localize`Ask a question about this document...`
-      : $localize`Ask a question about a document...`
-  }
-
-  ngOnInit(): void {
-    this.updateDocumentId(this.router.url)
-    this.router.events
-      .pipe(
-        filter((event) => event instanceof NavigationEnd),
-        map((event) => (event as NavigationEnd).url)
-      )
-      .subscribe((url) => {
-        this.updateDocumentId(url)
-      })
-  }
-
-  private updateDocumentId(url: string): void {
-    const docIdRe = url.match(/^\/documents\/(\d+)/)
-    this.documentId = docIdRe ? +docIdRe[1] : undefined
-  }
-
-  sendMessage(): void {
-    if (!this.input.trim()) return
-
-    const userMessage: ChatMessage = { role: 'user', content: this.input }
-    this.messages.push(userMessage)
-    this.scrollToBottom()
-
-    const assistantMessage: ChatMessage = {
-      role: 'assistant',
-      content: '',
-      isStreaming: true,
-    }
-    this.messages.push(assistantMessage)
-    this.loading = true
-
-    let lastPartialLength = 0
-
-    this.chatService.streamChat(this.documentId, this.input).subscribe({
-      next: (chunk) => {
-        const delta = chunk.substring(lastPartialLength)
-        lastPartialLength = chunk.length
-        this.enqueueTypewriter(delta, assistantMessage)
-      },
-      error: () => {
-        assistantMessage.content += '\n\n⚠️ Error receiving response.'
-        assistantMessage.isStreaming = false
-        this.loading = false
-      },
-      complete: () => {
-        assistantMessage.isStreaming = false
-        this.loading = false
-        this.scrollToBottom()
-      },
-    })
-
-    this.input = ''
-  }
-
-  enqueueTypewriter(chunk: string, message: ChatMessage): void {
-    if (!chunk) return
-
-    this.typewriterBuffer.push(...chunk.split(''))
-
-    if (!this.typewriterActive) {
-      this.typewriterActive = true
-      this.playTypewriter(message)
-    }
-  }
-
-  playTypewriter(message: ChatMessage): void {
-    if (this.typewriterBuffer.length === 0) {
-      this.typewriterActive = false
-      return
-    }
-
-    const nextChar = this.typewriterBuffer.shift()
-    message.content += nextChar
-    this.scrollToBottom()
-
-    setTimeout(() => this.playTypewriter(message), 10) // 10ms per character
-  }
-
-  private scrollToBottom(): void {
-    setTimeout(() => {
-      this.scrollAnchor?.nativeElement?.scrollIntoView({ behavior: 'smooth' })
-    }, 50)
-  }
-
-  public onOpenChange(open: boolean): void {
-    if (open) {
-      setTimeout(() => {
-        this.chatInput.nativeElement.focus()
-      }, 10)
-    }
-  }
-
-  public searchInputKeyDown(event: KeyboardEvent) {
-    if (event.key === 'Enter') {
-      event.preventDefault()
-      this.sendMessage()
-    }
-  }
-}

src-ui/src/app/components/common/confirm-dialog/password-removal-confirm-dialog/password-removal-confirm-dialog.component.html

@@ -1,75 +0,0 @@
-<div class="modal-header">
-  <h4 class="modal-title" id="modal-basic-title">{{title}}</h4>
-  <button type="button" class="btn-close" aria-label="Close" (click)="cancel()">
-  </button>
-</div>
-<div class="modal-body">
-  @if (message) {
-    <p class="mb-3" [innerHTML]="message"></p>
-  }
-  <div class="btn-group mb-3" role="group">
-    <input
-      type="radio"
-      class="btn-check"
-      name="passwordRemoveMode"
-      id="removeReplace"
-      [(ngModel)]="updateDocument"
-      [value]="true"
-      (ngModelChange)="onUpdateDocumentChange($event)"
-    />
-    <label class="btn btn-outline-primary btn-sm" for="removeReplace">
-      <i-bs name="pencil"></i-bs>
-      <span class="ms-2" i18n>Replace current document</span>
-    </label>
-    <input
-      type="radio"
-      class="btn-check"
-      name="passwordRemoveMode"
-      id="removeCreate"
-      [(ngModel)]="updateDocument"
-      [value]="false"
-      (ngModelChange)="onUpdateDocumentChange($event)"
-    />
-    <label class="btn btn-outline-primary btn-sm" for="removeCreate">
-      <i-bs name="plus"></i-bs>
-      <span class="ms-2" i18n>Create new document</span>
-    </label>
-  </div>
-  @if (!updateDocument) {
-    <div class="d-flex flex-column flex-md-row w-100 gap-3 align-items-center">
-      <div class="form-group d-flex">
-        <div class="form-check">
-          <input class="form-check-input" type="checkbox" id="copyMetaRemove" [(ngModel)]="includeMetadata" />
-          <label class="form-check-label" for="copyMetaRemove" i18n> Copy metadata
-          </label>
-        </div>
-        <div class="form-check ms-3">
-          <input class="form-check-input" type="checkbox" id="deleteOriginalRemove" [(ngModel)]="deleteOriginal" />
-          <label class="form-check-label" for="deleteOriginalRemove" i18n> Delete original</label>
-        </div>
-      </div>
-    </div>
-  }
-</div>
-<div class="modal-footer flex-nowrap gap-2">
-  <button
-    type="button"
-    class="btn"
-    [class]="cancelBtnClass"
-    (click)="cancel()"
-    [disabled]="!buttonsEnabled"
-  >
-    <span class="d-inline-block" style="padding-bottom: 1px;">
-      {{cancelBtnCaption}}
-    </span>
-  </button>
-  <button
-    type="button"
-    class="btn"
-    [class]="btnClass"
-    (click)="confirm()"
-    [disabled]="!confirmButtonEnabled || !buttonsEnabled"
-  >
-    {{btnCaption}}
-  </button>
-</div>

src-ui/src/app/components/common/confirm-dialog/password-removal-confirm-dialog/password-removal-confirm-dialog.component.spec.ts

@@ -1,53 +0,0 @@
-import { ComponentFixture, TestBed } from '@angular/core/testing'
-import { By } from '@angular/platform-browser'
-import { NgbActiveModal } from '@ng-bootstrap/ng-bootstrap'
-import { NgxBootstrapIconsModule, allIcons } from 'ngx-bootstrap-icons'
-import { PasswordRemovalConfirmDialogComponent } from './password-removal-confirm-dialog.component'
-
-describe('PasswordRemovalConfirmDialogComponent', () => {
-  let component: PasswordRemovalConfirmDialogComponent
-  let fixture: ComponentFixture<PasswordRemovalConfirmDialogComponent>
-
-  beforeEach(async () => {
-    await TestBed.configureTestingModule({
-      providers: [NgbActiveModal],
-      imports: [
-        NgxBootstrapIconsModule.pick(allIcons),
-        PasswordRemovalConfirmDialogComponent,
-      ],
-    }).compileComponents()
-
-    fixture = TestBed.createComponent(PasswordRemovalConfirmDialogComponent)
-    component = fixture.componentInstance
-    fixture.detectChanges()
-  })
-
-  it('should default to replacing the document', () => {
-    expect(component.updateDocument).toBe(true)
-    expect(
-      fixture.debugElement.query(By.css('#removeReplace')).nativeElement.checked
-    ).toBe(true)
-  })
-
-  it('should allow creating a new document with metadata and delete toggle', () => {
-    component.onUpdateDocumentChange(false)
-    fixture.detectChanges()
-
-    expect(component.updateDocument).toBe(false)
-    expect(fixture.debugElement.query(By.css('#copyMetaRemove'))).not.toBeNull()
-
-    component.includeMetadata = false
-    component.deleteOriginal = true
-    component.onUpdateDocumentChange(true)
-    expect(component.updateDocument).toBe(true)
-    expect(component.includeMetadata).toBe(true)
-    expect(component.deleteOriginal).toBe(false)
-  })
-
-  it('should emit confirm when confirmed', () => {
-    let confirmed = false
-    component.confirmClicked.subscribe(() => (confirmed = true))
-    component.confirm()
-    expect(confirmed).toBe(true)
-  })
-})

src-ui/src/app/components/common/confirm-dialog/password-removal-confirm-dialog/password-removal-confirm-dialog.component.ts

@@ -1,38 +0,0 @@
-import { Component, Input } from '@angular/core'
-import { FormsModule } from '@angular/forms'
-import { NgxBootstrapIconsModule } from 'ngx-bootstrap-icons'
-import { ConfirmDialogComponent } from '../confirm-dialog.component'
-
-@Component({
-  selector: 'pngx-password-removal-confirm-dialog',
-  templateUrl: './password-removal-confirm-dialog.component.html',
-  styleUrls: ['./password-removal-confirm-dialog.component.scss'],
-  imports: [FormsModule, NgxBootstrapIconsModule],
-})
-export class PasswordRemovalConfirmDialogComponent extends ConfirmDialogComponent {
-  updateDocument: boolean = true
-  includeMetadata: boolean = true
-  deleteOriginal: boolean = false
-
-  @Input()
-  override title = $localize`Remove password protection`
-
-  @Input()
-  override message =
-    $localize`Create an unprotected copy or replace the existing file.`
-
-  @Input()
-  override btnCaption = $localize`Start`
-
-  constructor() {
-    super()
-  }
-
-  onUpdateDocumentChange(updateDocument: boolean) {
-    this.updateDocument = updateDocument
-    if (this.updateDocument) {
-      this.deleteOriginal = false
-      this.includeMetadata = true
-    }
-  }
-}

src-ui/src/app/components/common/custom-fields-dropdown/custom-fields-dropdown.component.html

@@ -1,7 +1,7 @@
-<div ngbDropdown #fieldDropdown="ngbDropdown" (openChange)="onOpenClose($event)" [popperOptions]="popperOptions">
-    <button type="button" class="btn btn-sm btn-outline-primary" id="customFieldsDropdown" [disabled]="disabled" ngbDropdownToggle>
+<div ngbDropdown #fieldDropdown="ngbDropdown" (openChange)="onOpenClose($event)" [popperOptions]="popperOptions" placement="bottom-end">
+    <button class="btn btn-sm btn-outline-primary" id="customFieldsDropdown" [disabled]="disabled" ngbDropdownToggle>
       <i-bs name="ui-radios"></i-bs>
-      <div class="d-none d-lg-inline">&nbsp;<ng-container i18n>Custom Fields</ng-container></div>
+      <div class="d-none d-sm-inline">&nbsp;<ng-container i18n>Custom Fields</ng-container></div>
     </button>
     <div ngbDropdownMenu aria-labelledby="customFieldsDropdown" class="shadow custom-fields-dropdown">
         <div class="list-group list-group-flush" (keydown)="listKeyDown($event)">

src-ui/src/app/components/common/dates-dropdown/dates-dropdown.component.html

@@ -164,11 +164,9 @@
     {{ item.name }}
     <span class="ms-auto text-muted small">
       @if (item.dateEnd) {
-        {{ item.date | customDate:'mediumDate' }} &ndash; {{ item.dateEnd | customDate:'mediumDate' }}
-      } @else if (item.dateTilNow) {
-        {{ item.dateTilNow | customDate:'mediumDate' }} &ndash; <ng-container i18n>now</ng-container>
+        {{ item.date | customDate:'MMM d' }} &ndash; {{ item.dateEnd | customDate:'mediumDate' }}
       } @else {
-        {{ item.date | customDate:'mediumDate' }}
+        {{ item.date | customDate:'mediumDate' }} &ndash; <ng-container i18n>now</ng-container>
       }
     </span>
   </div>

src-ui/src/app/components/common/dates-dropdown/dates-dropdown.component.ts

@@ -79,34 +79,32 @@ export class DatesDropdownComponent implements OnInit, OnDestroy {
     {
       id: RelativeDate.WITHIN_1_WEEK,
       name: $localize`Within 1 week`,
-      dateTilNow: new Date().setDate(new Date().getDate() - 7),
+      date: new Date().setDate(new Date().getDate() - 7),
     },
     {
       id: RelativeDate.WITHIN_1_MONTH,
       name: $localize`Within 1 month`,
-      dateTilNow: new Date().setMonth(new Date().getMonth() - 1),
+      date: new Date().setMonth(new Date().getMonth() - 1),
     },
     {
       id: RelativeDate.WITHIN_3_MONTHS,
       name: $localize`Within 3 months`,
-      dateTilNow: new Date().setMonth(new Date().getMonth() - 3),
+      date: new Date().setMonth(new Date().getMonth() - 3),
     },
     {
       id: RelativeDate.WITHIN_1_YEAR,
       name: $localize`Within 1 year`,
-      dateTilNow: new Date().setFullYear(new Date().getFullYear() - 1),
+      date: new Date().setFullYear(new Date().getFullYear() - 1),
     },
     {
       id: RelativeDate.THIS_YEAR,
       name: $localize`This year`,
       date: new Date('1/1/' + new Date().getFullYear()),
-      dateEnd: new Date('12/31/' + new Date().getFullYear()),
     },
     {
       id: RelativeDate.THIS_MONTH,
       name: $localize`This month`,
       date: new Date().setDate(1),
-      dateEnd: new Date(new Date().getFullYear(), new Date().getMonth() + 1, 0),
     },
     {
       id: RelativeDate.TODAY,

src-ui/src/app/components/common/edit-dialog/workflow-edit-dialog/workflow-edit-dialog.component.spec.ts

@@ -412,9 +412,6 @@ describe('WorkflowEditDialogComponent', () => {
       return newFilter
     }
 
-    const correspondentAny = addFilterOfType(TriggerFilterType.CorrespondentAny)
-    correspondentAny.get('values').setValue([11])
-
     const correspondentIs = addFilterOfType(TriggerFilterType.CorrespondentIs)
     correspondentIs.get('values').setValue(1)
 
@@ -424,18 +421,12 @@ describe('WorkflowEditDialogComponent', () => {
     const documentTypeIs = addFilterOfType(TriggerFilterType.DocumentTypeIs)
     documentTypeIs.get('values').setValue(1)
 
-    const documentTypeAny = addFilterOfType(TriggerFilterType.DocumentTypeAny)
-    documentTypeAny.get('values').setValue([12])
-
     const documentTypeNot = addFilterOfType(TriggerFilterType.DocumentTypeNot)
     documentTypeNot.get('values').setValue([1])
 
     const storagePathIs = addFilterOfType(TriggerFilterType.StoragePathIs)
     storagePathIs.get('values').setValue(1)
 
-    const storagePathAny = addFilterOfType(TriggerFilterType.StoragePathAny)
-    storagePathAny.get('values').setValue([13])
-
     const storagePathNot = addFilterOfType(TriggerFilterType.StoragePathNot)
     storagePathNot.get('values').setValue([1])
 
@@ -450,13 +441,10 @@ describe('WorkflowEditDialogComponent', () => {
     expect(formValues.triggers[0].filter_has_tags).toEqual([1])
     expect(formValues.triggers[0].filter_has_all_tags).toEqual([2, 3])
     expect(formValues.triggers[0].filter_has_not_tags).toEqual([4])
-    expect(formValues.triggers[0].filter_has_any_correspondents).toEqual([11])
     expect(formValues.triggers[0].filter_has_correspondent).toEqual(1)
     expect(formValues.triggers[0].filter_has_not_correspondents).toEqual([1])
-    expect(formValues.triggers[0].filter_has_any_document_types).toEqual([12])
     expect(formValues.triggers[0].filter_has_document_type).toEqual(1)
     expect(formValues.triggers[0].filter_has_not_document_types).toEqual([1])
-    expect(formValues.triggers[0].filter_has_any_storage_paths).toEqual([13])
     expect(formValues.triggers[0].filter_has_storage_path).toEqual(1)
     expect(formValues.triggers[0].filter_has_not_storage_paths).toEqual([1])
     expect(formValues.triggers[0].filter_custom_field_query).toEqual(
@@ -519,22 +507,16 @@ describe('WorkflowEditDialogComponent', () => {
 
     setFilter(TriggerFilterType.TagsAll, 11)
     setFilter(TriggerFilterType.TagsNone, 12)
-    setFilter(TriggerFilterType.CorrespondentAny, 16)
     setFilter(TriggerFilterType.CorrespondentNot, 13)
-    setFilter(TriggerFilterType.DocumentTypeAny, 17)
     setFilter(TriggerFilterType.DocumentTypeNot, 14)
-    setFilter(TriggerFilterType.StoragePathAny, 18)
     setFilter(TriggerFilterType.StoragePathNot, 15)
 
     const formValues = component['getFormValues']()
 
     expect(formValues.triggers[0].filter_has_all_tags).toEqual([11])
     expect(formValues.triggers[0].filter_has_not_tags).toEqual([12])
-    expect(formValues.triggers[0].filter_has_any_correspondents).toEqual([16])
     expect(formValues.triggers[0].filter_has_not_correspondents).toEqual([13])
-    expect(formValues.triggers[0].filter_has_any_document_types).toEqual([17])
     expect(formValues.triggers[0].filter_has_not_document_types).toEqual([14])
-    expect(formValues.triggers[0].filter_has_any_storage_paths).toEqual([18])
     expect(formValues.triggers[0].filter_has_not_storage_paths).toEqual([15])
   })
 
@@ -658,11 +640,8 @@ describe('WorkflowEditDialogComponent', () => {
       filter_has_tags: [],
       filter_has_all_tags: [],
       filter_has_not_tags: [],
-      filter_has_any_correspondents: [],
       filter_has_not_correspondents: [],
-      filter_has_any_document_types: [],
       filter_has_not_document_types: [],
-      filter_has_any_storage_paths: [],
       filter_has_not_storage_paths: [],
       filter_has_correspondent: null,
       filter_has_document_type: null,
@@ -720,14 +699,11 @@ describe('WorkflowEditDialogComponent', () => {
     trigger.filter_has_tags = [1]
     trigger.filter_has_all_tags = [2, 3]
     trigger.filter_has_not_tags = [4]
-    trigger.filter_has_any_correspondents = [10] as any
     trigger.filter_has_correspondent = 5 as any
     trigger.filter_has_not_correspondents = [6] as any
     trigger.filter_has_document_type = 7 as any
-    trigger.filter_has_any_document_types = [11] as any
     trigger.filter_has_not_document_types = [8] as any
     trigger.filter_has_storage_path = 9 as any
-    trigger.filter_has_any_storage_paths = [12] as any
     trigger.filter_has_not_storage_paths = [10] as any
     trigger.filter_custom_field_query = JSON.stringify([
       'AND',
@@ -738,8 +714,8 @@ describe('WorkflowEditDialogComponent', () => {
     component.ngOnInit()
     const triggerGroup = component.triggerFields.at(0) as FormGroup
     const filters = component.getFiltersFormArray(triggerGroup)
-    expect(filters.length).toBe(13)
-    const customFieldFilter = filters.at(12) as FormGroup
+    expect(filters.length).toBe(10)
+    const customFieldFilter = filters.at(9) as FormGroup
     expect(customFieldFilter.get('type').value).toBe(
       TriggerFilterType.CustomFieldQuery
     )
@@ -748,27 +724,12 @@ describe('WorkflowEditDialogComponent', () => {
   })
 
   it('should expose select metadata helpers', () => {
-    expect(component.isSelectMultiple(TriggerFilterType.CorrespondentAny)).toBe(
-      true
-    )
     expect(component.isSelectMultiple(TriggerFilterType.CorrespondentNot)).toBe(
       true
     )
     expect(component.isSelectMultiple(TriggerFilterType.CorrespondentIs)).toBe(
       false
     )
-    expect(component.isSelectMultiple(TriggerFilterType.DocumentTypeAny)).toBe(
-      true
-    )
-    expect(component.isSelectMultiple(TriggerFilterType.DocumentTypeIs)).toBe(
-      false
-    )
-    expect(component.isSelectMultiple(TriggerFilterType.StoragePathAny)).toBe(
-      true
-    )
-    expect(component.isSelectMultiple(TriggerFilterType.StoragePathIs)).toBe(
-      false
-    )
 
     component.correspondents = [{ id: 1, name: 'C1' } as any]
     component.documentTypes = [{ id: 2, name: 'DT' } as any]
@@ -780,15 +741,9 @@ describe('WorkflowEditDialogComponent', () => {
     expect(
       component.getFilterSelectItems(TriggerFilterType.DocumentTypeIs)
     ).toEqual(component.documentTypes)
-    expect(
-      component.getFilterSelectItems(TriggerFilterType.DocumentTypeAny)
-    ).toEqual(component.documentTypes)
     expect(
       component.getFilterSelectItems(TriggerFilterType.StoragePathIs)
     ).toEqual(component.storagePaths)
-    expect(
-      component.getFilterSelectItems(TriggerFilterType.StoragePathAny)
-    ).toEqual(component.storagePaths)
     expect(component.getFilterSelectItems(TriggerFilterType.TagsAll)).toEqual(
       []
     )

src-ui/src/app/components/common/edit-dialog/workflow-edit-dialog/workflow-edit-dialog.component.ts

@@ -145,13 +145,10 @@ export enum TriggerFilterType {
   TagsAny = 'tags_any',
   TagsAll = 'tags_all',
   TagsNone = 'tags_none',
-  CorrespondentAny = 'correspondent_any',
   CorrespondentIs = 'correspondent_is',
   CorrespondentNot = 'correspondent_not',
-  DocumentTypeAny = 'document_type_any',
   DocumentTypeIs = 'document_type_is',
   DocumentTypeNot = 'document_type_not',
-  StoragePathAny = 'storage_path_any',
   StoragePathIs = 'storage_path_is',
   StoragePathNot = 'storage_path_not',
   CustomFieldQuery = 'custom_field_query',
@@ -175,11 +172,8 @@ type TriggerFilterAggregate = {
   filter_has_tags: number[]
   filter_has_all_tags: number[]
   filter_has_not_tags: number[]
-  filter_has_any_correspondents: number[]
   filter_has_not_correspondents: number[]
-  filter_has_any_document_types: number[]
   filter_has_not_document_types: number[]
-  filter_has_any_storage_paths: number[]
   filter_has_not_storage_paths: number[]
   filter_has_correspondent: number | null
   filter_has_document_type: number | null
@@ -225,14 +219,6 @@ const TRIGGER_FILTER_DEFINITIONS: TriggerFilterDefinition[] = [
     allowMultipleEntries: false,
     allowMultipleValues: true,
   },
-  {
-    id: TriggerFilterType.CorrespondentAny,
-    name: $localize`Has any of these correspondents`,
-    inputType: 'select',
-    allowMultipleEntries: false,
-    allowMultipleValues: true,
-    selectItems: 'correspondents',
-  },
   {
     id: TriggerFilterType.CorrespondentIs,
     name: $localize`Has correspondent`,
@@ -257,14 +243,6 @@ const TRIGGER_FILTER_DEFINITIONS: TriggerFilterDefinition[] = [
     allowMultipleValues: false,
     selectItems: 'documentTypes',
   },
-  {
-    id: TriggerFilterType.DocumentTypeAny,
-    name: $localize`Has any of these document types`,
-    inputType: 'select',
-    allowMultipleEntries: false,
-    allowMultipleValues: true,
-    selectItems: 'documentTypes',
-  },
   {
     id: TriggerFilterType.DocumentTypeNot,
     name: $localize`Does not have document types`,
@@ -281,14 +259,6 @@ const TRIGGER_FILTER_DEFINITIONS: TriggerFilterDefinition[] = [
     allowMultipleValues: false,
     selectItems: 'storagePaths',
   },
-  {
-    id: TriggerFilterType.StoragePathAny,
-    name: $localize`Has any of these storage paths`,
-    inputType: 'select',
-    allowMultipleEntries: false,
-    allowMultipleValues: true,
-    selectItems: 'storagePaths',
-  },
   {
     id: TriggerFilterType.StoragePathNot,
     name: $localize`Does not have storage paths`,
@@ -336,15 +306,6 @@ const FILTER_HANDLERS: Record<TriggerFilterType, FilterHandler> = {
     extract: (trigger) => trigger.filter_has_not_tags,
     hasValue: (value) => Array.isArray(value) && value.length > 0,
   },
-  [TriggerFilterType.CorrespondentAny]: {
-    apply: (aggregate, values) => {
-      aggregate.filter_has_any_correspondents = Array.isArray(values)
-        ? [...values]
-        : [values]
-    },
-    extract: (trigger) => trigger.filter_has_any_correspondents,
-    hasValue: (value) => Array.isArray(value) && value.length > 0,
-  },
   [TriggerFilterType.CorrespondentIs]: {
     apply: (aggregate, values) => {
       aggregate.filter_has_correspondent = Array.isArray(values)
@@ -372,15 +333,6 @@ const FILTER_HANDLERS: Record<TriggerFilterType, FilterHandler> = {
     extract: (trigger) => trigger.filter_has_document_type,
     hasValue: (value) => value !== null && value !== undefined,
   },
-  [TriggerFilterType.DocumentTypeAny]: {
-    apply: (aggregate, values) => {
-      aggregate.filter_has_any_document_types = Array.isArray(values)
-        ? [...values]
-        : [values]
-    },
-    extract: (trigger) => trigger.filter_has_any_document_types,
-    hasValue: (value) => Array.isArray(value) && value.length > 0,
-  },
   [TriggerFilterType.DocumentTypeNot]: {
     apply: (aggregate, values) => {
       aggregate.filter_has_not_document_types = Array.isArray(values)
@@ -399,15 +351,6 @@ const FILTER_HANDLERS: Record<TriggerFilterType, FilterHandler> = {
     extract: (trigger) => trigger.filter_has_storage_path,
     hasValue: (value) => value !== null && value !== undefined,
   },
-  [TriggerFilterType.StoragePathAny]: {
-    apply: (aggregate, values) => {
-      aggregate.filter_has_any_storage_paths = Array.isArray(values)
-        ? [...values]
-        : [values]
-    },
-    extract: (trigger) => trigger.filter_has_any_storage_paths,
-    hasValue: (value) => Array.isArray(value) && value.length > 0,
-  },
   [TriggerFilterType.StoragePathNot]: {
     apply: (aggregate, values) => {
       aggregate.filter_has_not_storage_paths = Array.isArray(values)
@@ -699,11 +642,8 @@ export class WorkflowEditDialogComponent
             filter_has_tags: [],
             filter_has_all_tags: [],
             filter_has_not_tags: [],
-            filter_has_any_correspondents: [],
             filter_has_not_correspondents: [],
-            filter_has_any_document_types: [],
             filter_has_not_document_types: [],
-            filter_has_any_storage_paths: [],
             filter_has_not_storage_paths: [],
             filter_has_correspondent: null,
             filter_has_document_type: null,
@@ -730,16 +670,10 @@ export class WorkflowEditDialogComponent
           trigger.filter_has_tags = aggregate.filter_has_tags
           trigger.filter_has_all_tags = aggregate.filter_has_all_tags
           trigger.filter_has_not_tags = aggregate.filter_has_not_tags
-          trigger.filter_has_any_correspondents =
-            aggregate.filter_has_any_correspondents
           trigger.filter_has_not_correspondents =
             aggregate.filter_has_not_correspondents
-          trigger.filter_has_any_document_types =
-            aggregate.filter_has_any_document_types
           trigger.filter_has_not_document_types =
             aggregate.filter_has_not_document_types
-          trigger.filter_has_any_storage_paths =
-            aggregate.filter_has_any_storage_paths
           trigger.filter_has_not_storage_paths =
             aggregate.filter_has_not_storage_paths
           trigger.filter_has_correspondent =
@@ -922,11 +856,8 @@ export class WorkflowEditDialogComponent
       case TriggerFilterType.TagsAny:
       case TriggerFilterType.TagsAll:
       case TriggerFilterType.TagsNone:
-      case TriggerFilterType.CorrespondentAny:
       case TriggerFilterType.CorrespondentNot:
-      case TriggerFilterType.DocumentTypeAny:
       case TriggerFilterType.DocumentTypeNot:
-      case TriggerFilterType.StoragePathAny:
       case TriggerFilterType.StoragePathNot:
         return true
       default:
@@ -1248,11 +1179,8 @@ export class WorkflowEditDialogComponent
       filter_has_tags: [],
       filter_has_all_tags: [],
       filter_has_not_tags: [],
-      filter_has_any_correspondents: [],
       filter_has_not_correspondents: [],
-      filter_has_any_document_types: [],
       filter_has_not_document_types: [],
-      filter_has_any_storage_paths: [],
       filter_has_not_storage_paths: [],
       filter_custom_field_query: null,
       filter_has_correspondent: null,

src-ui/src/app/components/common/input/password/password.component.html

@@ -1,24 +1,17 @@
-<div class="mb-3" [class.pb-3]="error">
-  <div class="row">
-    <div class="d-flex align-items-center position-relative hidden-button-container" [class.col-md-3]="horizontal">
-      @if (title) {
-        <label class="form-label" [class.mb-md-0]="horizontal" [for]="inputId">{{title}}</label>
-      }
-    </div>
-  <div class="position-relative" [class.col-md-9]="horizontal">
-    <div class="input-group" [class.is-invalid]="error">
-      <input #inputField [type]="showReveal && textVisible ? 'text' : 'password'" class="form-control" [class.is-invalid]="error" [id]="inputId" [(ngModel)]="value" (focus)="onFocus()" (focusout)="onFocusOut()" (change)="onChange(value)" [disabled]="disabled" [autocomplete]="autocomplete">
-      @if (showReveal) {
-        <button type="button" class="btn btn-outline-secondary" (click)="toggleVisibility()" i18n-title title="Show password" [disabled]="disabled || disableRevealToggle">
-          <i-bs name="eye"></i-bs>
-        </button>
-      }
-    </div>
-    <div class="invalid-feedback">
-      {{error}}
-    </div>
-    @if (hint) {
-      <small class="form-text text-muted" [innerHTML]="hint"></small>
+<div class="mb-3">
+  <label class="form-label" [for]="inputId">{{title}}</label>
+  <div class="input-group" [class.is-invalid]="error">
+    <input #inputField [type]="showReveal && textVisible ? 'text' : 'password'" class="form-control" [class.is-invalid]="error" [id]="inputId" [(ngModel)]="value" (focus)="onFocus()" (focusout)="onFocusOut()" (change)="onChange(value)" [disabled]="disabled" [autocomplete]="autocomplete">
+    @if (showReveal) {
+      <button type="button" class="btn btn-outline-secondary" (click)="toggleVisibility()" i18n-title title="Show password" [disabled]="disabled || disableRevealToggle">
+        <i-bs name="eye"></i-bs>
+      </button>
     }
   </div>
+  <div class="invalid-feedback">
+    {{error}}
+  </div>
+  @if (hint) {
+    <small class="form-text text-muted" [innerHTML]="hint"></small>
+  }
 </div>

src-ui/src/app/components/common/input/text/text.component.html

@@ -15,12 +15,6 @@
         @if (hint) {
           <small class="form-text text-muted" [innerHTML]="hint"></small>
         }
-        @if (getSuggestion()?.length > 0) {
-          <small>
-            <span i18n>Suggestion:</span>&nbsp;
-            <a (click)="applySuggestion(s)" [routerLink]="[]">{{getSuggestion()}}</a>&nbsp;
-          </small>
-        }
         <div class="invalid-feedback position-absolute top-100">
           {{error}}
         </div>

src-ui/src/app/components/common/input/text/text.component.spec.ts

@@ -26,20 +26,10 @@ describe('TextComponent', () => {
 
   it('should support use of input field', () => {
     expect(component.value).toBeUndefined()
-    input.value = 'foo'
-    input.dispatchEvent(new Event('input'))
-    fixture.detectChanges()
-    expect(component.value).toBe('foo')
-  })
-
-  it('should support suggestion', () => {
-    component.value = 'foo'
-    component.suggestion = 'foo'
-    expect(component.getSuggestion()).toBe('')
-    component.value = 'bar'
-    expect(component.getSuggestion()).toBe('foo')
-    component.applySuggestion()
-    fixture.detectChanges()
-    expect(component.value).toBe('foo')
+    // TODO: why doesn't this work?
+    // input.value = 'foo'
+    // input.dispatchEvent(new Event('change'))
+    // fixture.detectChanges()
+    // expect(component.value).toEqual('foo')
   })
 })

src-ui/src/app/components/common/input/text/text.component.ts

@@ -4,7 +4,6 @@ import {
   NG_VALUE_ACCESSOR,
   ReactiveFormsModule,
 } from '@angular/forms'
-import { RouterLink } from '@angular/router'
 import { NgxBootstrapIconsModule } from 'ngx-bootstrap-icons'
 import { AbstractInputComponent } from '../abstract-input'
 
@@ -19,12 +18,7 @@ import { AbstractInputComponent } from '../abstract-input'
   selector: 'pngx-input-text',
   templateUrl: './text.component.html',
   styleUrls: ['./text.component.scss'],
-  imports: [
-    FormsModule,
-    ReactiveFormsModule,
-    NgxBootstrapIconsModule,
-    RouterLink,
-  ],
+  imports: [FormsModule, ReactiveFormsModule, NgxBootstrapIconsModule],
 })
 export class TextComponent extends AbstractInputComponent<string> {
   @Input()
@@ -33,19 +27,7 @@ export class TextComponent extends AbstractInputComponent<string> {
   @Input()
   placeholder: string = ''
 
-  @Input()
-  suggestion: string = ''
-
   constructor() {
     super()
   }
-
-  getSuggestion() {
-    return this.value !== this.suggestion ? this.suggestion : ''
-  }
-
-  applySuggestion() {
-    this.value = this.suggestion
-    this.onChange(this.value)
-  }
 }

src-ui/src/app/components/common/page-header/page-header.component.html

@@ -1,18 +1,9 @@
 <div class="row pt-3 pb-3 pb-md-2 align-items-center">
   <div class="col-md text-truncate">
-    <h3 class="d-flex align-items-center mb-1" style="line-height: 1.4">
-      <span class="text-truncate">{{title}}</span>
-      @if (id) {
-        <span class="badge bg-primary text-primary-text-contrast ms-3 small fs-normal cursor-pointer" (click)="copyID()">
-          @if (copied) {
-            <i-bs width="1em" height="1em" name="clipboard-check"></i-bs>&nbsp;<ng-container i18n>Copied!</ng-container>
-          } @else {
-            ID: {{id}}
-          }
-        </span>
-      }
+    <h3 class="text-truncate" style="line-height: 1.4">
+      {{title}}
       @if (subTitle) {
-        <span class="h6 mb-0 mt-1 d-block d-md-inline fw-normal ms-md-3 text-truncate" style="line-height: 1.4">{{subTitle}}</span>
+        <span class="h6 mb-0 d-block d-md-inline fw-normal ms-md-3 text-truncate" style="line-height: 1.4">{{subTitle}}</span>
       }
       @if (info) {
         <button class="btn btn-sm btn-link text-muted me-auto p-0 p-md-2" title="What's this?" i18n-title type="button" [ngbPopover]="infoPopover" [autoClose]="true">

src-ui/src/app/components/common/page-header/page-header.component.scss

@@ -1,10 +1,5 @@
 h3 {
     min-height: calc(1.325rem + 0.9vw);
-
-    .badge {
-        font-size: 0.65rem;
-        line-height: 1;
-    }
 }
 
 @media (min-width: 1200px) {

src-ui/src/app/components/common/page-header/page-header.component.spec.ts

@@ -1,4 +1,3 @@
-import { Clipboard } from '@angular/cdk/clipboard'
 import { ComponentFixture, TestBed } from '@angular/core/testing'
 import { Title } from '@angular/platform-browser'
 import { environment } from 'src/environments/environment'
@@ -8,7 +7,6 @@ describe('PageHeaderComponent', () => {
   let component: PageHeaderComponent
   let fixture: ComponentFixture<PageHeaderComponent>
   let titleService: Title
-  let clipboard: Clipboard
 
   beforeEach(async () => {
     TestBed.configureTestingModule({
@@ -17,7 +15,6 @@ describe('PageHeaderComponent', () => {
     }).compileComponents()
 
     titleService = TestBed.inject(Title)
-    clipboard = TestBed.inject(Clipboard)
     fixture = TestBed.createComponent(PageHeaderComponent)
     component = fixture.componentInstance
     fixture.detectChanges()
@@ -27,8 +24,7 @@ describe('PageHeaderComponent', () => {
     component.title = 'Foo'
     component.subTitle = 'Bar'
     fixture.detectChanges()
-    expect(fixture.nativeElement.textContent).toContain('Foo')
-    expect(fixture.nativeElement.textContent).toContain('Bar')
+    expect(fixture.nativeElement.textContent).toContain('Foo Bar')
   })
 
   it('should set html title', () => {
@@ -36,16 +32,4 @@ describe('PageHeaderComponent', () => {
     component.title = 'Foo Bar'
     expect(titleSpy).toHaveBeenCalledWith(`Foo Bar - ${environment.appTitle}`)
   })
-
-  it('should copy id to clipboard, reset after 3 seconds', () => {
-    jest.useFakeTimers()
-    component.id = 42 as any
-    jest.spyOn(clipboard, 'copy').mockReturnValue(true)
-    component.copyID()
-    expect(clipboard.copy).toHaveBeenCalledWith('42')
-    expect(component.copied).toBe(true)
-
-    jest.advanceTimersByTime(3000)
-    expect(component.copied).toBe(false)
-  })
 })

src-ui/src/app/components/common/page-header/page-header.component.ts

@@ -1,4 +1,3 @@
-import { Clipboard } from '@angular/cdk/clipboard'
 import { Component, Input, inject } from '@angular/core'
 import { Title } from '@angular/platform-browser'
 import { NgbPopoverModule } from '@ng-bootstrap/ng-bootstrap'
@@ -14,11 +13,8 @@ import { environment } from 'src/environments/environment'
 })
 export class PageHeaderComponent {
   private titleService = inject(Title)
-  private clipboard = inject(Clipboard)
 
-  private _title = ''
-  public copied: boolean = false
-  private copyTimeout: any
+  _title = ''
 
   @Input()
   set title(title: string) {
@@ -30,9 +26,6 @@ export class PageHeaderComponent {
     return this._title
   }
 
-  @Input()
-  id: number
-
   @Input()
   subTitle: string = ''
 
@@ -41,12 +34,4 @@ export class PageHeaderComponent {
 
   @Input()
   infoLink: string
-
-  public copyID() {
-    this.copied = this.clipboard.copy(this.id.toString())
-    clearTimeout(this.copyTimeout)
-    this.copyTimeout = setTimeout(() => {
-      this.copied = false
-    }, 3000)
-  }
 }

src-ui/src/app/components/common/pdf-editor/pdf-editor-edit-mode.ts

@@ -1,4 +0,0 @@
-export enum PdfEditorEditMode {
-  Update = 'update',
-  Create = 'create',
-}

src-ui/src/app/components/common/pdf-editor/pdf-editor.component.ts

@@ -8,11 +8,8 @@ import { FormsModule } from '@angular/forms'
 import { NgbActiveModal } from '@ng-bootstrap/ng-bootstrap'
 import { PDFDocumentProxy, PdfViewerModule } from 'ng2-pdf-viewer'
 import { NgxBootstrapIconsModule } from 'ngx-bootstrap-icons'
-import { SETTINGS_KEYS } from 'src/app/data/ui-settings'
 import { DocumentService } from 'src/app/services/rest/document.service'
-import { SettingsService } from 'src/app/services/settings.service'
 import { ConfirmDialogComponent } from '../confirm-dialog/confirm-dialog.component'
-import { PdfEditorEditMode } from './pdf-editor-edit-mode'
 
 interface PageOperation {
   page: number
@@ -22,6 +19,11 @@ interface PageOperation {
   loaded?: boolean
 }
 
+export enum PdfEditorEditMode {
+  Update = 'update',
+  Create = 'create',
+}
+
 @Component({
   selector: 'pngx-pdf-editor',
   templateUrl: './pdf-editor.component.html',
@@ -37,15 +39,12 @@ export class PDFEditorComponent extends ConfirmDialogComponent {
   public PdfEditorEditMode = PdfEditorEditMode
 
   private documentService = inject(DocumentService)
-  private readonly settingsService = inject(SettingsService)
   activeModal: NgbActiveModal = inject(NgbActiveModal)
 
   documentID: number
   pages: PageOperation[] = []
   totalPages = 0
-  editMode: PdfEditorEditMode = this.settingsService.get(
-    SETTINGS_KEYS.PDF_EDITOR_DEFAULT_EDIT_MODE
-  )
+  editMode: PdfEditorEditMode = PdfEditorEditMode.Create
   deleteOriginal: boolean = false
   includeMetadata: boolean = true
 

src-ui/src/app/components/common/preview-popup/preview-popup.component.html

@@ -14,7 +14,7 @@
         @if (previewText) {
           <div class="bg-light p-3 overflow-auto whitespace-preserve" width="100%">{{previewText}}</div>
         } @else {
-          <object [data]="previewUrl | safeUrl" width="100%" class="bg-light" [class.p-2]="!isPdf"></object>
+          <object [data]="previewURL | safeUrl" width="100%" class="bg-light" [class.p-2]="!isPdf"></object>
         }
       } @else {
         @if (requiresPassword) {
@@ -24,7 +24,7 @@
         }
         @if (!requiresPassword) {
           <pdf-viewer
-            [src]="previewUrl"
+            [src]="previewURL"
             [original-size]="false"
             [show-borders]="false"
             [show-all]="true"

src-ui/src/app/components/common/preview-popup/preview-popup.component.ts

@@ -71,7 +71,7 @@ export class PreviewPopupComponent implements OnDestroy {
     return (this.isPdf && this.useNativePdfViewer) || !this.isPdf
   }
 
-  get previewUrl() {
+  get previewURL() {
     return this.documentService.getPreviewUrl(this.document.id)
   }
 
@@ -93,7 +93,7 @@ export class PreviewPopupComponent implements OnDestroy {
   init() {
     if (this.document.mime_type?.includes('text')) {
       this.http
-        .get(this.previewUrl, { responseType: 'text' })
+        .get(this.previewURL, { responseType: 'text' })
         .pipe(first(), takeUntil(this.unsubscribeNotifier))
         .subscribe({
           next: (res) => {
@@ -126,6 +126,10 @@ export class PreviewPopupComponent implements OnDestroy {
     }
   }
 
+  get previewUrl() {
+    return this.documentService.getPreviewUrl(this.document.id)
+  }
+
   mouseEnterPreview() {
     this.mouseOnPreview = true
     if (!this.popover.isOpen()) {

src-ui/src/app/components/common/share-link-bundle-dialog/share-link-bundle-dialog.component.html

@@ -1,129 +0,0 @@
-<div class="modal-header">
-  <h4 class="modal-title">{{ title }}</h4>
-  <button type="button" class="btn-close" aria-label="Close" (click)="cancel()"></button>
-</div>
-<div class="modal-body">
-  @if (!createdBundle) {
-    <form [formGroup]="form" class="d-flex flex-column gap-3">
-      <div>
-        <p class="mb-1">
-          <ng-container i18n>Selected documents:</ng-container>
-          {{ selectionCount }}
-        </p>
-        @if (documentPreview.length > 0) {
-          <ul class="list-unstyled small mb-0">
-            @for (doc of documentPreview; track doc.id) {
-              <li>
-                <strong>{{ doc.title | documentTitle }}</strong>
-              </li>
-            }
-            @if (selectionCount > documentPreview.length) {
-              <li>
-                <ng-container i18n>+ {{ selectionCount - documentPreview.length }} more…</ng-container>
-              </li>
-            }
-          </ul>
-        }
-      </div>
-
-      <div class="d-flex align-items-center justify-content-between">
-        <div class="input-group">
-          <label class="input-group-text" for="expirationDays"><ng-container i18n>Expires</ng-container>:</label>
-          <select class="form-select" id="expirationDays" formControlName="expirationDays">
-            @for (option of expirationOptions; track option.value) {
-              <option [ngValue]="option.value">{{ option.label }}</option>
-            }
-          </select>
-        </div>
-        <div class="form-check form-switch w-100 ms-3">
-          <input
-            class="form-check-input"
-            type="checkbox"
-            role="switch"
-            id="shareArchiveSwitch"
-            formControlName="shareArchiveVersion"
-            aria-checked="{{ shareArchiveVersion }}"
-          />
-          <label class="form-check-label" for="shareArchiveSwitch" i18n>Share archive version (if available)</label>
-        </div>
-      </div>
-    </form>
-  } @else {
-    <div class="d-flex flex-column gap-3">
-      <div class="alert alert-success mb-0" role="status">
-        <h6 class="alert-heading mb-1" i18n>Share link bundle requested</h6>
-        <p class="mb-0 small" i18n>
-          You can copy the share link below or open the manager to monitor progress. The link will start working once the bundle is ready.
-        </p>
-      </div>
-      <dl class="row mb-0 small">
-        <dt class="col-sm-4" i18n>Status</dt>
-        <dd class="col-sm-8">
-          <span class="badge text-bg-secondary text-uppercase">{{ statusLabel(createdBundle.status) }}</span>
-        </dd>
-        <dt class="col-sm-4" i18n>Slug</dt>
-        <dd class="col-sm-8"><code>{{ createdBundle.slug }}</code></dd>
-        <dt class="col-sm-4" i18n>Link</dt>
-        <dd class="col-sm-8">
-          <div class="input-group input-group-sm">
-            <input class="form-control" type="text" [value]="getShareUrl(createdBundle)" readonly>
-            <button
-              class="btn btn-outline-primary"
-              type="button"
-              (click)="copy(createdBundle)"
-            >
-              @if (copied) {
-                <i-bs name="clipboard-check"></i-bs>
-              }
-              @if (!copied) {
-                <i-bs name="clipboard"></i-bs>
-              }
-              <span class="visually-hidden" i18n>Copy link</span>
-            </button>
-          </div>
-        </dd>
-        <dt class="col-sm-4" i18n>Documents</dt>
-        <dd class="col-sm-8">{{ createdBundle.document_count }}</dd>
-        <dt class="col-sm-4" i18n>Expires</dt>
-        <dd class="col-sm-8">
-          @if (createdBundle.expiration) {
-            {{ createdBundle.expiration | date: 'short' }}
-          }
-          @if (!createdBundle.expiration) {
-            <span i18n>Never</span>
-          }
-        </dd>
-        <dt class="col-sm-4" i18n>File version</dt>
-        <dd class="col-sm-8">{{ fileVersionLabel(createdBundle.file_version) }}</dd>
-        @if (createdBundle.size_bytes !== undefined && createdBundle.size_bytes !== null) {
-          <dt class="col-sm-4" i18n>Size</dt>
-          <dd class="col-sm-8">{{ createdBundle.size_bytes | fileSize }}</dd>
-        }
-      </dl>
-    </div>
-  }
-</div>
-<div class="modal-footer">
-  <div class="d-flex align-items-center gap-2 w-100">
-    <div class="text-light fst-italic small">
-      <ng-container i18n>A zip file containing the selected documents will be created for this share link bundle. This process happens in the background and may take some time, especially for large bundles.</ng-container>
-    </div>
-    <button type="button" class="btn btn-outline-secondary btn-sm ms-auto" (click)="cancel()">{{ cancelBtnCaption }}</button>
-    @if (createdBundle) {
-      <button type="button" class="btn btn-outline-secondary btn-sm text-nowrap" (click)="openManage()" i18n>Manage share link bundles</button>
-    }
-
-    @if (!createdBundle) {
-      <button
-        type="button"
-        class="btn btn-primary btn-sm d-inline-flex align-items-center gap-2 text-nowrap"
-        (click)="submit()"
-        [disabled]="loading || !buttonsEnabled">
-        @if (loading) {
-          <span class="spinner-border spinner-border-sm" role="status" aria-hidden="true"></span>
-        }
-        {{ btnCaption }}
-      </button>
-    }
-  </div>
-</div>

src-ui/src/app/components/common/share-link-bundle-dialog/share-link-bundle-dialog.component.spec.ts

@@ -1,161 +0,0 @@
-import { Clipboard } from '@angular/cdk/clipboard'
-import {
-  ComponentFixture,
-  TestBed,
-  fakeAsync,
-  tick,
-} from '@angular/core/testing'
-import { NgbActiveModal } from '@ng-bootstrap/ng-bootstrap'
-import { NgxBootstrapIconsModule, allIcons } from 'ngx-bootstrap-icons'
-import { FileVersion } from 'src/app/data/share-link'
-import {
-  ShareLinkBundleStatus,
-  ShareLinkBundleSummary,
-} from 'src/app/data/share-link-bundle'
-import { ToastService } from 'src/app/services/toast.service'
-import { environment } from 'src/environments/environment'
-import { ShareLinkBundleDialogComponent } from './share-link-bundle-dialog.component'
-
-class MockToastService {
-  showInfo = jest.fn()
-  showError = jest.fn()
-}
-
-describe('ShareLinkBundleDialogComponent', () => {
-  let component: ShareLinkBundleDialogComponent
-  let fixture: ComponentFixture<ShareLinkBundleDialogComponent>
-  let clipboard: Clipboard
-  let toastService: MockToastService
-  let activeModal: NgbActiveModal
-  let originalApiBaseUrl: string
-
-  beforeEach(() => {
-    originalApiBaseUrl = environment.apiBaseUrl
-    toastService = new MockToastService()
-
-    TestBed.configureTestingModule({
-      imports: [
-        ShareLinkBundleDialogComponent,
-        NgxBootstrapIconsModule.pick(allIcons),
-      ],
-      providers: [
-        NgbActiveModal,
-        { provide: ToastService, useValue: toastService },
-      ],
-    })
-
-    fixture = TestBed.createComponent(ShareLinkBundleDialogComponent)
-    component = fixture.componentInstance
-    clipboard = TestBed.inject(Clipboard)
-    activeModal = TestBed.inject(NgbActiveModal)
-    fixture.detectChanges()
-  })
-
-  afterEach(() => {
-    jest.clearAllTimers()
-    environment.apiBaseUrl = originalApiBaseUrl
-  })
-
-  it('builds payload and emits confirm on submit', () => {
-    const confirmSpy = jest.spyOn(component.confirmClicked, 'emit')
-    component.documents = [
-      { id: 1, title: 'Doc 1' } as any,
-      { id: 2, title: 'Doc 2' } as any,
-    ]
-    component.form.setValue({
-      shareArchiveVersion: false,
-      expirationDays: 3,
-    })
-
-    component.submit()
-
-    expect(component.payload).toEqual({
-      document_ids: [1, 2],
-      file_version: FileVersion.Original,
-      expiration_days: 3,
-    })
-    expect(component.buttonsEnabled).toBe(false)
-    expect(confirmSpy).toHaveBeenCalled()
-
-    component.form.setValue({
-      shareArchiveVersion: true,
-      expirationDays: 7,
-    })
-    component.submit()
-
-    expect(component.payload).toEqual({
-      document_ids: [1, 2],
-      file_version: FileVersion.Archive,
-      expiration_days: 7,
-    })
-  })
-
-  it('ignores submit when bundle already created', () => {
-    component.createdBundle = { id: 1 } as ShareLinkBundleSummary
-    const confirmSpy = jest.spyOn(component, 'confirm')
-    component.submit()
-    expect(confirmSpy).not.toHaveBeenCalled()
-  })
-
-  it('limits preview to ten documents', () => {
-    const docs = Array.from({ length: 12 }).map((_, index) => ({
-      id: index + 1,
-    }))
-    component.documents = docs as any
-
-    expect(component.selectionCount).toBe(12)
-    expect(component.documentPreview).toHaveLength(10)
-    expect(component.documentPreview[0].id).toBe(1)
-  })
-
-  it('copies share link and resets state after timeout', fakeAsync(() => {
-    const copySpy = jest.spyOn(clipboard, 'copy').mockReturnValue(true)
-    const bundle = {
-      slug: 'bundle-slug',
-      status: ShareLinkBundleStatus.Ready,
-    } as ShareLinkBundleSummary
-
-    component.copy(bundle)
-
-    expect(copySpy).toHaveBeenCalledWith(component.getShareUrl(bundle))
-    expect(component.copied).toBe(true)
-    expect(toastService.showInfo).toHaveBeenCalled()
-
-    tick(3000)
-    expect(component.copied).toBe(false)
-  }))
-
-  it('generates share URLs based on API base URL', () => {
-    environment.apiBaseUrl = 'https://example.com/api/'
-    expect(
-      component.getShareUrl({ slug: 'abc' } as ShareLinkBundleSummary)
-    ).toBe('https://example.com/share/abc')
-  })
-
-  it('opens manage dialog when callback provided', () => {
-    const manageSpy = jest.fn()
-    component.onOpenManage = manageSpy
-    component.openManage()
-    expect(manageSpy).toHaveBeenCalled()
-  })
-
-  it('falls back to cancel when manage callback missing', () => {
-    const cancelSpy = jest.spyOn(component, 'cancel')
-    component.onOpenManage = undefined
-    component.openManage()
-    expect(cancelSpy).toHaveBeenCalled()
-  })
-
-  it('maps status and file version labels', () => {
-    expect(component.statusLabel(ShareLinkBundleStatus.Processing)).toContain(
-      'Processing'
-    )
-    expect(component.fileVersionLabel(FileVersion.Archive)).toContain('Archive')
-  })
-
-  it('closes dialog when cancel invoked', () => {
-    const closeSpy = jest.spyOn(activeModal, 'close')
-    component.cancel()
-    expect(closeSpy).toHaveBeenCalled()
-  })
-})

src-ui/src/app/components/common/share-link-bundle-dialog/share-link-bundle-dialog.component.ts

@@ -1,118 +0,0 @@
-import { Clipboard } from '@angular/cdk/clipboard'
-import { CommonModule } from '@angular/common'
-import { Component, Input, inject } from '@angular/core'
-import { FormBuilder, FormGroup, ReactiveFormsModule } from '@angular/forms'
-import { NgxBootstrapIconsModule } from 'ngx-bootstrap-icons'
-import { Document } from 'src/app/data/document'
-import {
-  FileVersion,
-  SHARE_LINK_EXPIRATION_OPTIONS,
-} from 'src/app/data/share-link'
-import {
-  SHARE_LINK_BUNDLE_FILE_VERSION_LABELS,
-  SHARE_LINK_BUNDLE_STATUS_LABELS,
-  ShareLinkBundleCreatePayload,
-  ShareLinkBundleStatus,
-  ShareLinkBundleSummary,
-} from 'src/app/data/share-link-bundle'
-import { DocumentTitlePipe } from 'src/app/pipes/document-title.pipe'
-import { FileSizePipe } from 'src/app/pipes/file-size.pipe'
-import { ToastService } from 'src/app/services/toast.service'
-import { environment } from 'src/environments/environment'
-import { ConfirmDialogComponent } from '../confirm-dialog/confirm-dialog.component'
-
-@Component({
-  selector: 'pngx-share-link-bundle-dialog',
-  templateUrl: './share-link-bundle-dialog.component.html',
-  imports: [
-    CommonModule,
-    ReactiveFormsModule,
-    NgxBootstrapIconsModule,
-    FileSizePipe,
-    DocumentTitlePipe,
-  ],
-  providers: [],
-})
-export class ShareLinkBundleDialogComponent extends ConfirmDialogComponent {
-  private readonly formBuilder = inject(FormBuilder)
-  private readonly clipboard = inject(Clipboard)
-  private readonly toastService = inject(ToastService)
-
-  private _documents: Document[] = []
-
-  selectionCount = 0
-  documentPreview: Document[] = []
-  form: FormGroup = this.formBuilder.group({
-    shareArchiveVersion: true,
-    expirationDays: [7],
-  })
-  payload: ShareLinkBundleCreatePayload | null = null
-
-  readonly expirationOptions = SHARE_LINK_EXPIRATION_OPTIONS
-
-  createdBundle: ShareLinkBundleSummary | null = null
-  copied = false
-  onOpenManage?: () => void
-  readonly statuses = ShareLinkBundleStatus
-
-  constructor() {
-    super()
-    this.loading = false
-    this.title = $localize`Create share link bundle`
-    this.btnCaption = $localize`Create link`
-  }
-
-  @Input()
-  set documents(docs: Document[]) {
-    this._documents = docs.concat()
-    this.selectionCount = this._documents.length
-    this.documentPreview = this._documents.slice(0, 10)
-  }
-
-  submit() {
-    if (this.createdBundle) return
-    this.payload = {
-      document_ids: this._documents.map((doc) => doc.id),
-      file_version: this.form.value.shareArchiveVersion
-        ? FileVersion.Archive
-        : FileVersion.Original,
-      expiration_days: this.form.value.expirationDays,
-    }
-    this.buttonsEnabled = false
-    super.confirm()
-  }
-
-  getShareUrl(bundle: ShareLinkBundleSummary): string {
-    const apiURL = new URL(environment.apiBaseUrl)
-    return `${apiURL.origin}${apiURL.pathname.replace(/\/api\/$/, '/share/')}${
-      bundle.slug
-    }`
-  }
-
-  copy(bundle: ShareLinkBundleSummary): void {
-    const success = this.clipboard.copy(this.getShareUrl(bundle))
-    if (success) {
-      this.copied = true
-      this.toastService.showInfo($localize`Share link copied to clipboard.`)
-      setTimeout(() => {
-        this.copied = false
-      }, 3000)
-    }
-  }
-
-  openManage(): void {
-    if (this.onOpenManage) {
-      this.onOpenManage()
-    } else {
-      this.cancel()
-    }
-  }
-
-  statusLabel(status: ShareLinkBundleSummary['status']): string {
-    return SHARE_LINK_BUNDLE_STATUS_LABELS[status] ?? status
-  }
-
-  fileVersionLabel(version: FileVersion): string {
-    return SHARE_LINK_BUNDLE_FILE_VERSION_LABELS[version] ?? version
-  }
-}

src-ui/src/app/components/common/share-link-bundle-manage-dialog/share-link-bundle-manage-dialog.component.html

@@ -1,156 +0,0 @@
-<div class="modal-header">
-  <h4 class="modal-title">{{ title }}</h4>
-  <button type="button" class="btn-close" aria-label="Close" (click)="close()"></button>
-</div>
-
-<div class="modal-body">
-  @if (loading) {
-    <div class="d-flex align-items-center gap-2">
-      <div class="spinner-border spinner-border-sm" role="status"></div>
-      <span i18n>Loading share link bundles…</span>
-    </div>
-  }
-  @if (!loading && error) {
-    <div class="alert alert-danger mb-0" role="alert">
-      {{ error }}
-    </div>
-  }
-  @if (!loading && !error) {
-    <div class="d-flex justify-content-between align-items-center mb-2">
-      <p class="mb-0 text-muted small">
-        <ng-container i18n>Status updates every few seconds while bundles are being prepared.</ng-container>
-      </p>
-    </div>
-    @if (bundles.length === 0) {
-      <p class="mb-0 text-muted fst-italic" i18n>No share link bundles currently exist.</p>
-    }
-    @if (bundles.length > 0) {
-      <div class="table-responsive">
-        <table class="table table-sm align-middle mb-0">
-          <thead>
-            <tr>
-              <th scope="col" i18n>Created</th>
-              <th scope="col" i18n>Status</th>
-              <th scope="col" i18n>Size</th>
-              <th scope="col" i18n>Expires</th>
-              <th scope="col" i18n>Documents</th>
-              <th scope="col" i18n>File version</th>
-              <th scope="col" class="text-end" i18n>Actions</th>
-            </tr>
-          </thead>
-          <tbody>
-            @for (bundle of bundles; track bundle.id) {
-              <tr>
-                <td>
-                  <div>{{ bundle.created | date: 'short' }}</div>
-                  @if (bundle.built_at) {
-                    <div class="small text-muted">
-                      <ng-container i18n>Built:</ng-container> {{ bundle.built_at | date: 'short' }}
-                    </div>
-                  }
-                </td>
-                <td>
-                  <div class="d-flex align-items-center gap-2">
-                    @if (bundle.status === statuses.Failed && bundle.last_error) {
-                      <button
-                        type="button"
-                        class="btn btn-link p-0 text-danger"
-                        [ngbPopover]="errorDetail"
-                        popoverClass="popover-sm"
-                        triggers="mouseover:mouseleave"
-                        placement="auto"
-                        aria-label="View error details"
-                        i18n-aria-label
-                      >
-                        <span class="badge text-bg-warning text-uppercase me-2">{{ statusLabel(bundle.status) }}</span>
-                        <i-bs name="exclamation-triangle-fill" class="text-warning"></i-bs>
-                      </button>
-                      <ng-template #errorDetail>
-                        @if (bundle.last_error.timestamp) {
-                          <div class="text-muted small mb-1">
-                            {{ bundle.last_error.timestamp | date: 'short' }}
-                          </div>
-                        }
-                        <h6>{{ bundle.last_error.exception_type || ($localize`Unknown error`) }}</h6>
-                        @if (bundle.last_error.message) {
-                          <pre class="text-muted small"><code>{{ bundle.last_error.message }}</code></pre>
-                        }
-                      </ng-template>
-                    }
-                    @if (bundle.status === statuses.Processing || bundle.status === statuses.Pending) {
-                      <span class="spinner-border spinner-border-sm" role="status"></span>
-                    }
-                    @if (bundle.status !== statuses.Failed) {
-                      <span class="badge text-bg-secondary text-uppercase">{{ statusLabel(bundle.status) }}</span>
-                    }
-                  </div>
-                </td>
-                <td>
-                  @if (bundle.size_bytes !== undefined && bundle.size_bytes !== null) {
-                    {{ bundle.size_bytes | fileSize }}
-                  }
-                  @if (bundle.size_bytes === undefined || bundle.size_bytes === null) {
-                    <span class="text-muted">&mdash;</span>
-                  }
-                </td>
-                <td>
-                  @if (bundle.expiration) {
-                    {{ bundle.expiration | date: 'short' }}
-                  }
-                  @if (!bundle.expiration) {
-                    <span i18n>Never</span>
-                  }
-                </td>
-                <td>{{ bundle.document_count }}</td>
-                <td>{{ fileVersionLabel(bundle.file_version) }}</td>
-                <td class="text-end">
-                  <div class="btn-group btn-group-sm">
-                    <button
-                      type="button"
-                      class="btn btn-outline-primary"
-                      [disabled]="bundle.status !== statuses.Ready"
-                      (click)="copy(bundle)"
-                      title="Copy share link"
-                      i18n-title
-                    >
-                      @if (copiedSlug === bundle.slug) {
-                        <i-bs name="clipboard-check"></i-bs>
-                      }
-                      @if (copiedSlug !== bundle.slug) {
-                        <i-bs name="clipboard"></i-bs>
-                      }
-                      <span class="visually-hidden" i18n>Copy share link</span>
-                    </button>
-                    @if (bundle.status === statuses.Failed) {
-                      <button
-                        type="button"
-                        class="btn btn-outline-warning"
-                        [disabled]="loading"
-                        (click)="retry(bundle)"
-                      >
-                        <i-bs name="arrow-clockwise"></i-bs>
-                        <span class="visually-hidden" i18n>Retry</span>
-                      </button>
-                    }
-                    <pngx-confirm-button
-                      buttonClasses="btn btn-sm btn-outline-danger"
-                      [disabled]="loading"
-                      (confirm)="delete(bundle)"
-                      iconName="trash"
-                    >
-                      <span class="visually-hidden" i18n>Delete share link bundle</span>
-                    </pngx-confirm-button>
-                  </div>
-                </td>
-              </tr>
-            }
-          </tbody>
-        </table>
-      </div>
-    }
-  }
-</div>
-
-<div class="modal-footer">
-  <button type="button" class="btn btn-outline-secondary btn-sm" (click)="close()" i18n>Close</button>
-</div>

src-ui/src/app/components/common/share-link-bundle-manage-dialog/share-link-bundle-manage-dialog.component.scss

@@ -1,4 +0,0 @@
-:host ::ng-deep .popover {
-  min-width: 300px;
-  max-width: 400px;
- }