docker(deps): Bump astral-sh/uv (#9531)

Bumps [astral-sh/uv](https://github.com/astral-sh/uv) from 0.6.9-python3.12-bookworm-slim to 0.6.11-python3.12-bookworm-slim.
- [Release notes](https://github.com/astral-sh/uv/releases)
- [Changelog](https://github.com/astral-sh/uv/blob/main/CHANGELOG.md)
- [Commits](https://github.com/astral-sh/uv/compare/0.6.9...0.6.11)

---
updated-dependencies:
- dependency-name: astral-sh/uv
  dependency-version: 0.6.11-python3.12-bookworm-slim
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

.codecov.yml

@@ -1,18 +1,18 @@
 codecov:
   require_ci_to_pass: true
-# https://docs.codecov.com/docs/flags#recommended-automatic-flag-management
-# Require each flag to have 1 upload before notification
-flag_management:
-  individual_flags:
-    - name: backend
+  # https://docs.codecov.com/docs/components
+component_management:
+  individual_components:
+    - component_id: backend
       paths:
-        - src/
-    - name: frontend
+        - src/**
+    - component_id: frontend
       paths:
-        - src-ui/
+        - src-ui/**
 # https://docs.codecov.com/docs/pull-request-comments
 # codecov will only comment if coverage changes
 comment:
+  layout: "header, diff, components, flags, files"
   require_changes: true
   # https://docs.codecov.com/docs/javascript-bundle-analysis
   require_bundle_changes: true

.devcontainer/Dockerfile

@@ -76,18 +76,15 @@ RUN set -eux \
     && apt-get update \
     && apt-get install --yes --quiet --no-install-recommends ${RUNTIME_PACKAGES}
 
-ARG PYTHON_PACKAGES="\
-  python3 \
-  python3-pip \
-  python3-wheel \
-  pipenv \
-  ca-certificates"
+ARG PYTHON_PACKAGES="ca-certificates"
 
 RUN set -eux \
   echo "Installing python packages" \
     && apt-get update \
     && apt-get install --yes --quiet ${PYTHON_PACKAGES}
 
+COPY --from=ghcr.io/astral-sh/uv:0.6 /uv /bin/uv
+
 RUN set -eux \
   && echo "Installing pre-built updates" \
     && echo "Installing qpdf ${QPDF_VERSION}" \
@@ -123,13 +120,15 @@ RUN set -eux \
 WORKDIR /usr/src/paperless/src/docker/
 
 COPY [ \
-  "docker/imagemagick-policy.xml", \
+  "docker/rootfs/etc/ImageMagick-6/paperless-policy.xml", \
   "./" \
 ]
 
 RUN set -eux \
   && echo "Configuring ImageMagick" \
-    && mv imagemagick-policy.xml /etc/ImageMagick-6/policy.xml
+    && mv paperless-policy.xml /etc/ImageMagick-6/policy.xml
+
+COPY --from=ghcr.io/astral-sh/uv:0.6 /uv /bin/uv
 
 # Packages needed only for building a few quick Python
 # dependencies
@@ -140,18 +139,17 @@ ARG BUILD_PACKAGES="\
   libpq-dev \
   # https://github.com/PyMySQL/mysqlclient#linux
   default-libmysqlclient-dev \
-  pkg-config \
-  pre-commit"
+  pkg-config"
 
 # hadolint ignore=DL3042
-RUN --mount=type=cache,target=/root/.cache/pip/,id=pip-cache \
+RUN --mount=type=cache,target=/root/.cache/uv,id=pip-cache \
   set -eux \
   && echo "Installing build system packages" \
     && apt-get update \
     && apt-get install --yes --quiet ${BUILD_PACKAGES}
 
 RUN set -eux \
-  && npm update npm -g
+  && npm update -g pnpm
 
 # add users, setup scripts
 # Mount the compiled frontend to expected location
@@ -169,9 +167,6 @@ RUN set -eux \
     && mkdir --parents --verbose /usr/src/paperless/paperless-ngx/.venv \
   && echo "Adjusting all permissions" \
     && chown --from root:root --changes --recursive paperless:paperless /usr/src/paperless
-#  && echo "Collecting static files" \
-#    && gosu paperless python3 manage.py collectstatic --clear --no-input --link \
-#    && gosu paperless python3 manage.py compilemessages
 
 VOLUME ["/usr/src/paperless/paperless-ngx/data", \
         "/usr/src/paperless/paperless-ngx/media", \

.devcontainer/README.md

@@ -0,0 +1,117 @@
+# Paperless-ngx Development Environment
+
+## Overview
+
+Welcome to the Paperless-ngx development environment! This setup uses VSCode DevContainers to provide a consistent and seamless development experience.
+
+### What are DevContainers?
+
+DevContainers are a feature in VSCode that allows you to develop within a Docker container. This ensures that your development environment is consistent across different machines and setups. By defining a containerized environment, you can eliminate the "works on my machine" problem.
+
+### Advantages of DevContainers
+
+- **Consistency**: Same environment for all developers.
+- **Isolation**: Separate development environment from your local machine.
+- **Reproducibility**: Easily recreate the environment on any machine.
+- **Pre-configured Tools**: Include all necessary tools and dependencies in the container.
+
+## DevContainer Setup
+
+The DevContainer configuration provides up all the necessary services for Paperless-ngx, including:
+
+- Redis
+- Gotenberg
+- Tika
+
+Data is stored using Docker volumes to ensure persistence across container restarts.
+
+## Configuration Files
+
+The setup includes debugging configurations (`launch.json`) and tasks (`tasks.json`) to help you manage and debug various parts of the project:
+
+- **Backend Debugging:**
+  - `manage.py runserver`
+  - `manage.py document-consumer`
+  - `celery`
+- **Maintenance Tasks:**
+  - Create superuser
+  - Run migrations
+  - Recreate virtual environment (`.venv` with `uv`)
+  - Compile frontend assets
+
+## Getting Started
+
+### Step 1: Running the DevContainer
+
+To start the DevContainer:
+
+1. Open VSCode.
+2. Open the project folder.
+3. Open the command palette:
+   - **Windows/Linux**: `Ctrl+Shift+P`
+   - **Mac**: `Cmd+Shift+P`
+4. Type and select `Dev Containers: Rebuild and Reopen in Container`.
+
+VSCode will build and start the DevContainer environment.
+
+### Step 2: Initial Setup
+
+Once the DevContainer is up and running, perform the following steps:
+
+1. **Compile Frontend Assets**:
+
+   - Open the command palette:
+     - **Windows/Linux**: `Ctrl+Shift+P`
+     - **Mac**: `Cmd+Shift+P`
+   - Select `Tasks: Run Task`.
+   - Choose `Frontend Compile`.
+
+2. **Run Database Migrations**:
+
+   - Open the command palette:
+     - **Windows/Linux**: `Ctrl+Shift+P`
+     - **Mac**: `Cmd+Shift+P`
+   - Select `Tasks: Run Task`.
+   - Choose `Migrate Database`.
+
+3. **Create Superuser**:
+   - Open the command palette:
+     - **Windows/Linux**: `Ctrl+Shift+P`
+     - **Mac**: `Cmd+Shift+P`
+   - Select `Tasks: Run Task`.
+   - Choose `Create Superuser`.
+
+### Debugging and Running Services
+
+You can start and debug backend services either as debugging sessions via `launch.json` or as tasks.
+
+#### Using `launch.json`
+
+1. Press `F5` or go to the **Run and Debug** view in VSCode.
+2. Select the desired configuration:
+   - `Runserver`
+   - `Document Consumer`
+   - `Celery`
+
+#### Using Tasks
+
+1. Open the command palette:
+   - **Windows/Linux**: `Ctrl+Shift+P`
+   - **Mac**: `Cmd+Shift+P`
+2. Select `Tasks: Run Task`.
+3. Choose the desired task:
+   - `Runserver`
+   - `Document Consumer`
+   - `Celery`
+
+### Additional Maintenance Tasks
+
+Additional tasks are available for common maintenance operations:
+
+- **Recreate .venv**: For setting up the virtual environment using `uv`.
+- **Migrate Database**: To apply database migrations.
+- **Create Superuser**: To create an admin user for the application.
+
+## Let's Get Started!
+
+Follow the steps above to get your development environment up and running. Happy coding!

.devcontainer/devcontainer.json

@@ -3,7 +3,7 @@
     "dockerComposeFile": "docker-compose.devcontainer.sqlite-tika.yml",
     "service": "paperless-development",
     "workspaceFolder": "/usr/src/paperless/paperless-ngx",
-    "postCreateCommand": "pipenv install --dev && pipenv run pre-commit install",
+    "postCreateCommand": "/bin/bash -c 'uv sync --group dev && uv run pre-commit install'",
     "customizations": {
         "vscode": {
           "extensions": [

.devcontainer/docker-compose.devcontainer.sqlite-tika.yml

@@ -43,7 +43,7 @@ services:
     volumes:
       - ..:/usr/src/paperless/paperless-ngx:delegated
       - ../.devcontainer/vscode:/usr/src/paperless/paperless-ngx/.vscode:delegated # VSCode config files
-      - pipenv:/usr/src/paperless/paperless-ngx/.venv
+      - virtualenv:/usr/src/paperless/paperless-ngx/.venv # Virtual environment persisted in volume
       - /usr/src/paperless/paperless-ngx/src/documents/static/frontend # Static frontend files exist only in container
       - /usr/src/paperless/paperless-ngx/src/.pytest_cache
       - /usr/src/paperless/paperless-ngx/.ruff_cache
@@ -65,7 +65,7 @@ services:
     command: /bin/sh -c "chown -R paperless:paperless /usr/src/paperless/paperless-ngx/src/documents/static/frontend && chown -R paperless:paperless /usr/src/paperless/paperless-ngx/.ruff_cache && while sleep 1000; do :; done"
 
   gotenberg:
-    image: docker.io/gotenberg/gotenberg:7.10
+    image: docker.io/gotenberg/gotenberg:8.17
     restart: unless-stopped
 
     # The Gotenberg Chromium route is used to convert .eml files. We do not
@@ -80,4 +80,7 @@ services:
     restart: unless-stopped
 
 volumes:
-  pipenv:
+  data:
+  media:
+  redisdata:
+  virtualenv:

.devcontainer/vscode/tasks.json

@@ -5,7 +5,7 @@
 			"label": "Start: Celery Worker",
 			"description": "Start the Celery Worker which processes background and consume tasks",
 			"type": "shell",
-			"command": "pipenv run celery --app paperless worker -l DEBUG",
+			"command": "uv run celery --app paperless worker -l DEBUG",
 			"isBackground": true,
 			"options": {
 				"cwd": "${workspaceFolder}/src"
@@ -33,7 +33,7 @@
 			"label": "Start: Frontend Angular",
 			"description": "Start the Frontend Angular Dev Server",
 			"type": "shell",
-			"command": "npm start",
+			"command": "pnpm start",
 			"isBackground": true,
 			"options": {
 				"cwd": "${workspaceFolder}/src-ui"
@@ -61,7 +61,7 @@
 			"label": "Start: Consumer Service (manage.py document_consumer)",
 			"description": "Start the Consumer Service which processes files from a directory",
 			"type": "shell",
-			"command": "pipenv run python manage.py document_consumer",
+			"command": "uv run python manage.py document_consumer",
 			"group": "build",
 			"presentation": {
 				"echo": true,
@@ -80,7 +80,7 @@
 			"label": "Start: Backend Server (manage.py runserver)",
 			"description": "Start the Backend Server which serves the Django API and the compiled Angular frontend",
 			"type": "shell",
-			"command": "pipenv run python manage.py runserver",
+			"command": "uv run python manage.py runserver",
 			"group": "build",
 			"presentation": {
 				"echo": true,
@@ -99,7 +99,7 @@
 			"label": "Maintenance: manage.py migrate",
 			"description": "Apply database migrations",
 			"type": "shell",
-			"command": "pipenv run python manage.py migrate",
+			"command": "uv run python manage.py migrate",
 			"group": "none",
 			"presentation": {
 				"echo": true,
@@ -118,7 +118,7 @@
 			"label": "Maintenance: Build Documentation",
 			"description": "Build the documentation with MkDocs",
 			"type": "shell",
-			"command": "pipenv run mkdocs build --config-file mkdocs.yml && pipenv run mkdocs serve",
+			"command": "uv run mkdocs build --config-file mkdocs.yml && uv run mkdocs serve",
 			"group": "none",
 			"presentation": {
 				"echo": true,
@@ -137,7 +137,7 @@
 			"label": "Maintenance: manage.py createsuperuser",
 			"description": "Create a superuser",
 			"type": "shell",
-			"command": "pipenv run python manage.py createsuperuser",
+			"command": "uv run python manage.py createsuperuser",
 			"group": "none",
 			"presentation": {
 				"echo": true,
@@ -156,7 +156,7 @@
 			"label": "Maintenance: recreate .venv",
 			"description": "Recreate the python virtual environment and install python dependencies",
 			"type": "shell",
-			"command": "rm -R -v .venv/* || pipenv install --dev",
+			"command": "rm -R -v .venv/* || uv install --dev",
 			"group": "none",
 			"presentation": {
 				"echo": true,
@@ -173,8 +173,8 @@
 		},
 		{
 			"label": "Maintenance: Install Frontend Dependencies",
-			"description": "Install frontend (npm) dependencies",
-			"type": "npm",
+			"description": "Install frontend (pnpm) dependencies",
+			"type": "pnpm",
 			"script": "install",
 			"path": "src-ui",
 			"group": "clean",
@@ -185,7 +185,7 @@
 			"description": "Clean install frontend dependencies and build the frontend for production",
 			"label": "Maintenance: Compile frontend for production",
 			"type": "shell",
-			"command": "npm ci && ./node_modules/.bin/ng build --configuration production",
+			"command": "pnpm install && ./node_modules/.bin/ng build --configuration production",
 			"group": "none",
 			"presentation": {
 				"echo": true,

.dockerignore

@@ -26,3 +26,5 @@
 ./dist
 ./scripts
 ./resources
+# Other stuff
+**/*.drawio.png

.editorconfig

@@ -27,9 +27,6 @@ indent_style = space
 [*.md]
 indent_style = space
 
-[Pipfile.lock]
-indent_style = space
-
 # Tests don't get a line width restriction.  It's still a good idea to follow
 # the 79 character rule, but in the interests of clarity, tests often need to
 # violate it.

.github/FUNDING.yml

@@ -0,0 +1 @@
+github: [shamoon, stumpylog]

.github/dependabot.yml

@@ -1,12 +1,15 @@
-# https://docs.github.com/en/code-security/supply-chain-security/keeping-your-dependencies-updated-automatically/configuration-options-for-dependency-updates#package-ecosystem
+# Please see the documentation for all configuration options:
+# https://docs.github.com/github/administering-a-repository/configuration-options-for-dependency-updates
 
 version: 2
+# Required for uv support for now
+enable-beta-ecosystems: true
 updates:
 
-  # Enable version updates for npm
+  # Enable version updates for pnpm
   - package-ecosystem: "npm"
     target-branch: "dev"
-    # Look for `package.json` and `lock` files in the `/src-ui` directory
+    # Look for `pnpm-lock.yaml` file in the `/src-ui` directory
     directory: "/src-ui"
     open-pull-requests-limit: 10
     schedule:
@@ -34,9 +37,8 @@ updates:
           - "eslint"
 
   # Enable version updates for Python
-  - package-ecosystem: "pip"
+  - package-ecosystem: "uv"
     target-branch: "dev"
-    # Look for a `Pipfile` in the `root` directory
     directory: "/"
     # Check for updates once a week
     schedule:
@@ -47,14 +49,13 @@ updates:
     # Add reviewers
     reviewers:
       - "paperless-ngx/backend"
-    ignore:
-      - dependency-name: "uvicorn"
     groups:
       development:
         patterns:
           - "*pytest*"
           - "ruff"
           - "mkdocs-material"
+          - "pre-commit*"
       django:
         patterns:
           - "*django*"
@@ -65,6 +66,10 @@ updates:
         update-types:
           - "minor"
           - "patch"
+      pre-built:
+        patterns:
+          - psycopg*
+          - zxing-cpp
 
   # Enable updates for GitHub Actions
   - package-ecosystem: "github-actions"
@@ -85,3 +90,50 @@ updates:
           - "major"
           - "minor"
           - "patch"
+
+  # Update Dockerfile in root directory
+  - package-ecosystem: "docker"
+    directory: "/"
+    schedule:
+      interval: "weekly"
+    open-pull-requests-limit: 5
+    reviewers:
+      - "paperless-ngx/ci-cd"
+    labels:
+      - "ci-cd"
+      - "dependencies"
+    commit-message:
+      prefix: "docker"
+      include: "scope"
+
+  # Update Docker Compose files in docker/compose directory
+  - package-ecosystem: "docker-compose"
+    directory: "/docker/compose/"
+    schedule:
+      interval: "weekly"
+    open-pull-requests-limit: 5
+    reviewers:
+      - "paperless-ngx/ci-cd"
+    labels:
+      - "ci-cd"
+      - "dependencies"
+    commit-message:
+      prefix: "docker-compose"
+      include: "scope"
+    groups:
+      # Individual groups for each image
+      gotenberg:
+        patterns:
+          - "docker.io/gotenberg/gotenberg*"
+      tika:
+        patterns:
+          - "docker.io/apache/tika*"
+      redis:
+        patterns:
+          - "docker.io/library/redis*"
+      mariadb:
+        patterns:
+          - "docker.io/library/mariadb*"
+      postgres:
+        patterns:
+          - "docker.io/library/postgres*"

.github/workflows/ci.yml

@@ -14,9 +14,7 @@ on:
       - 'translations**'
 
 env:
-  # This is the version of pipenv all the steps will use
-  # If changing this, change Dockerfile
-  DEFAULT_PIP_ENV_VERSION: "2024.4.0"
+  DEFAULT_UV_VERSION: "0.6.x"
   # This is the default version of Python to use in most steps which aren't specific
   DEFAULT_PYTHON_VERSION: "3.11"
 
@@ -59,24 +57,25 @@ jobs:
         uses: actions/setup-python@v5
         with:
           python-version: ${{ env.DEFAULT_PYTHON_VERSION }}
-          cache: "pipenv"
-          cache-dependency-path: 'Pipfile.lock'
       -
-        name: Install pipenv
-        run: |
-          pip install --user pipenv==${{ env.DEFAULT_PIP_ENV_VERSION }}
+        name: Install uv
+        uses: astral-sh/setup-uv@v5
+        with:
+          version: ${{ env.DEFAULT_UV_VERSION }}
+          enable-cache: true
+          python-version: ${{ env.DEFAULT_PYTHON_VERSION }}
       -
-        name: Install dependencies
+        name: Install Python dependencies
         run: |
-          pipenv --python ${{ steps.setup-python.outputs.python-version }} sync --dev
-      -
-        name: List installed Python dependencies
-        run: |
-          pipenv --python ${{ steps.setup-python.outputs.python-version }} run pip list
+          uv sync --python ${{ steps.setup-python.outputs.python-version }} --dev --frozen
       -
         name: Make documentation
         run: |
-          pipenv --python ${{ steps.setup-python.outputs.python-version }} run mkdocs build --config-file ./mkdocs.yml
+          uv run \
+            --python ${{ steps.setup-python.outputs.python-version }} \
+            --dev \
+            --frozen \
+            mkdocs build --config-file ./mkdocs.yml
       -
         name: Deploy documentation
         if: github.event_name == 'push' && github.ref == 'refs/heads/main'
@@ -84,7 +83,11 @@ jobs:
           echo "docs.paperless-ngx.com" > "${{ github.workspace }}/docs/CNAME"
           git config --global user.name "${{ github.actor }}"
           git config --global user.email "${{ github.actor }}@users.noreply.github.com"
-          pipenv --python ${{ steps.setup-python.outputs.python-version }} run mkdocs gh-deploy --force --no-history
+          uv run \
+            --python ${{ steps.setup-python.outputs.python-version }} \
+            --dev \
+            --frozen \
+            mkdocs gh-deploy --force --no-history
       -
         name: Upload artifact
         uses: actions/upload-artifact@v4
@@ -117,12 +120,13 @@ jobs:
         uses: actions/setup-python@v5
         with:
           python-version: "${{ matrix.python-version }}"
-          cache: "pipenv"
-          cache-dependency-path: 'Pipfile.lock'
       -
-        name: Install pipenv
-        run: |
-          pip install --user pipenv==${{ env.DEFAULT_PIP_ENV_VERSION }}
+        name: Install uv
+        uses: astral-sh/setup-uv@v5
+        with:
+          version: ${{ env.DEFAULT_UV_VERSION }}
+          enable-cache: true
+          python-version: ${{ steps.setup-python.outputs.python-version }}
       -
         name: Install system dependencies
         run: |
@@ -131,16 +135,18 @@ jobs:
       -
         name: Configure ImageMagick
         run: |
-          sudo cp docker/imagemagick-policy.xml /etc/ImageMagick-6/policy.xml
+          sudo cp docker/rootfs/etc/ImageMagick-6/paperless-policy.xml /etc/ImageMagick-6/policy.xml
       -
         name: Install Python dependencies
         run: |
-          pipenv --python ${{ steps.setup-python.outputs.python-version }} run python --version
-          pipenv --python ${{ steps.setup-python.outputs.python-version }} sync --dev
+          uv sync \
+            --python ${{ steps.setup-python.outputs.python-version }} \
+            --group testing \
+            --frozen
       -
         name: List installed Python dependencies
         run: |
-          pipenv --python ${{ steps.setup-python.outputs.python-version }} run pip list
+          uv pip list
       -
         name: Tests
         env:
@@ -150,17 +156,26 @@ jobs:
           PAPERLESS_MAIL_TEST_USER: ${{ secrets.TEST_MAIL_USER }}
           PAPERLESS_MAIL_TEST_PASSWD: ${{ secrets.TEST_MAIL_PASSWD }}
         run: |
-          cd src/
-          pipenv --python ${{ steps.setup-python.outputs.python-version }} run pytest -ra
+          uv run \
+            --python ${{ steps.setup-python.outputs.python-version }} \
+            --dev \
+            --frozen \
+            pytest
       -
-        name: Upload coverage
-        if: ${{ matrix.python-version == env.DEFAULT_PYTHON_VERSION }}
-        uses: actions/upload-artifact@v4
+        name: Upload backend test results to Codecov
+        if: always()
+        uses: codecov/test-results-action@v1
         with:
-          name: backend-coverage-report
-          path: src/coverage.xml
-          retention-days: 7
-          if-no-files-found: warn
+          token: ${{ secrets.CODECOV_TOKEN }}
+          flags: backend-python-${{ matrix.python-version }}
+          files: junit.xml
+      -
+        name: Upload backend coverage to Codecov
+        uses: codecov/codecov-action@v5
+        with:
+          token: ${{ secrets.CODECOV_TOKEN }}
+          flags: backend-python-${{ matrix.python-version }}
+          files: coverage.xml
       -
         name: Stop containers
         if: always()
@@ -168,42 +183,46 @@ jobs:
           docker compose --file ${{ github.workspace }}/docker/compose/docker-compose.ci-test.yml logs
           docker compose --file ${{ github.workspace }}/docker/compose/docker-compose.ci-test.yml down
 
-  install-frontend-depedendencies:
+  install-frontend-dependencies:
     name: "Install Frontend Dependencies"
     runs-on: ubuntu-24.04
     needs:
       - pre-commit
     steps:
       - uses: actions/checkout@v4
+      - name: Install pnpm
+        uses: pnpm/action-setup@v4
+        with:
+          version: 10
       -
         name: Use Node.js 20
         uses: actions/setup-node@v4
         with:
           node-version: 20.x
-          cache: 'npm'
-          cache-dependency-path: 'src-ui/package-lock.json'
+          cache: 'pnpm'
+          cache-dependency-path: 'src-ui/pnpm-lock.yaml'
       - name: Cache frontend dependencies
         id: cache-frontend-deps
         uses: actions/cache@v4
         with:
           path: |
-            ~/.npm
+            ~/.pnpm-store
             ~/.cache
-          key: ${{ runner.os }}-frontenddeps-${{ hashFiles('src-ui/package-lock.json') }}
+          key: ${{ runner.os }}-frontenddeps-${{ hashFiles('src-ui/pnpm-lock.yaml') }}
       -
         name: Install dependencies
         if: steps.cache-frontend-deps.outputs.cache-hit != 'true'
-        run: cd src-ui && npm ci
+        run: cd src-ui && pnpm install
       -
         name: Install Playwright
         if: steps.cache-frontend-deps.outputs.cache-hit != 'true'
-        run: cd src-ui && npx playwright install --with-deps
+        run: cd src-ui && pnpm playwright install --with-deps
 
   tests-frontend:
     name: "Frontend Tests (Node ${{ matrix.node-version }} - ${{ matrix.shard-index }}/${{ matrix.shard-count }})"
     runs-on: ubuntu-24.04
     needs:
-      - install-frontend-depedendencies
+      - install-frontend-dependencies
     strategy:
       fail-fast: false
       matrix:
@@ -212,124 +231,88 @@ jobs:
         shard-count: [4]
     steps:
       - uses: actions/checkout@v4
+      - name: Install pnpm
+        uses: pnpm/action-setup@v4
+        with:
+          version: 10
       -
         name: Use Node.js 20
         uses: actions/setup-node@v4
         with:
           node-version: 20.x
-          cache: 'npm'
-          cache-dependency-path: 'src-ui/package-lock.json'
+          cache: 'pnpm'
+          cache-dependency-path: 'src-ui/pnpm-lock.yaml'
       - name: Cache frontend dependencies
         id: cache-frontend-deps
         uses: actions/cache@v4
         with:
           path: |
-            ~/.npm
+            ~/.pnpm-store
             ~/.cache
-          key: ${{ runner.os }}-frontenddeps-${{ hashFiles('src-ui/package-lock.json') }}
+          key: ${{ runner.os }}-frontenddeps-${{ hashFiles('src-ui/pnpm-lock.yaml') }}
       - name: Re-link Angular cli
-        run: cd src-ui && npm link @angular/cli
+        run: cd src-ui && pnpm link @angular/cli
       -
         name: Linting checks
-        run: cd src-ui && npm run lint
+        run: cd src-ui && pnpm run lint
       -
         name: Run Jest unit tests
-        run: cd src-ui && npm run test -- --max-workers=2 --shard=${{ matrix.shard-index }}/${{ matrix.shard-count }}
-      -
-        name: Upload Jest coverage
-        if: always()
-        uses: actions/upload-artifact@v4
-        with:
-          name: jest-coverage-report-${{ matrix.shard-index }}
-          path: |
-            src-ui/coverage/coverage-final.json
-            src-ui/coverage/lcov.info
-            src-ui/coverage/clover.xml
-          retention-days: 7
-          if-no-files-found: warn
+        run: cd src-ui && pnpm run test --max-workers=2 --shard=${{ matrix.shard-index }}/${{ matrix.shard-count }}
       -
         name: Run Playwright e2e tests
-        run: cd src-ui && npx playwright test --shard ${{ matrix.shard-index }}/${{ matrix.shard-count }}
+        run: cd src-ui && pnpm exec playwright test --shard ${{ matrix.shard-index }}/${{ matrix.shard-count }}
       -
-        name: Upload Playwright test results
+        name: Upload frontend test results to Codecov
+        uses: codecov/test-results-action@v1
         if: always()
-        uses: actions/upload-artifact@v4
         with:
-          name: playwright-report-${{ matrix.shard-index }}
-          path: src-ui/playwright-report
-          retention-days: 7
-
-  tests-coverage-upload:
-    name: "Upload to Codecov"
-    runs-on: ubuntu-24.04
-    needs:
-      - tests-backend
-      - tests-frontend
-    steps:
-      -
-        uses: actions/checkout@v4
-      -
-        name: Download frontend jest coverage
-        uses: actions/download-artifact@v4
-        with:
-          path: src-ui/coverage/
-          pattern: jest-coverage-report-*
-      -
-        name: Download frontend playwright coverage
-        uses: actions/download-artifact@v4
-        with:
-          path: src-ui/coverage/
-          pattern: playwright-report-*
-          merge-multiple: true
+          token: ${{ secrets.CODECOV_TOKEN }}
+          flags: frontend-node-${{ matrix.node-version }}
+          directory: src-ui/
       -
         name: Upload frontend coverage to Codecov
         uses: codecov/codecov-action@v5
         with:
-          # not required for public repos, but intermittently fails otherwise
           token: ${{ secrets.CODECOV_TOKEN }}
-          flags: frontend
+          flags: frontend-node-${{ matrix.node-version }}
           directory: src-ui/coverage/
-          # dont include backend coverage files here
-          files: '!coverage.xml'
+
+  frontend-bundle-analysis:
+    name: "Frontend Bundle Analysis"
+    runs-on: ubuntu-24.04
+    needs:
+      - tests-frontend
+    steps:
+      - uses: actions/checkout@v4
       -
-        name: Download backend coverage
-        uses: actions/download-artifact@v4
+        name: Install pnpm
+        uses: pnpm/action-setup@v4
         with:
-          name: backend-coverage-report
-          path: src/
-      -
-        name: Upload coverage to Codecov
-        uses: codecov/codecov-action@v5
-        with:
-          # not required for public repos, but intermittently fails otherwise
-          token: ${{ secrets.CODECOV_TOKEN }}
-          # future expansion
-          flags: backend
-          directory: src/
+          version: 10
       -
         name: Use Node.js 20
         uses: actions/setup-node@v4
         with:
           node-version: 20.x
-          cache: 'npm'
-          cache-dependency-path: 'src-ui/package-lock.json'
+          cache: 'pnpm'
+          cache-dependency-path: 'src-ui/pnpm-lock.yaml'
       -
         name: Cache frontend dependencies
         id: cache-frontend-deps
         uses: actions/cache@v4
         with:
           path: |
-            ~/.npm
+            ~/.pnpm-store
             ~/.cache
           key: ${{ runner.os }}-frontenddeps-${{ hashFiles('src-ui/package-lock.json') }}
       -
         name: Re-link Angular cli
-        run: cd src-ui && npm link @angular/cli
+        run: cd src-ui && pnpm link @angular/cli
       -
         name: Build frontend and upload analysis
         env:
           CODECOV_TOKEN: ${{ secrets.CODECOV_TOKEN }}
-        run: cd src-ui && ng build --configuration=production
+        run: cd src-ui && pnpm run build --configuration=production
 
   build-docker-image:
     name: Build Docker image for ${{ github.ref_name }}
@@ -472,16 +455,17 @@ jobs:
         uses: actions/setup-python@v5
         with:
           python-version: ${{ env.DEFAULT_PYTHON_VERSION }}
-          cache: "pipenv"
-          cache-dependency-path: 'Pipfile.lock'
       -
-        name: Install pipenv + tools
-        run: |
-          pip install --upgrade --user pipenv==${{ env.DEFAULT_PIP_ENV_VERSION }} setuptools wheel
+        name: Install uv
+        uses: astral-sh/setup-uv@v5
+        with:
+          version: ${{ env.DEFAULT_UV_VERSION }}
+          enable-cache: true
+          python-version: ${{ steps.setup-python.outputs.python-version }}
       -
         name: Install Python dependencies
         run: |
-          pipenv --python ${{ steps.setup-python.outputs.python-version }} sync --dev
+          uv sync --python ${{ steps.setup-python.outputs.python-version }} --dev --frozen
       -
         name: Install system dependencies
         run: |
@@ -502,17 +486,21 @@ jobs:
       -
         name: Generate requirements file
         run: |
-          pipenv --python ${{ steps.setup-python.outputs.python-version }} requirements > requirements.txt
+           uv export --quiet --no-dev --all-extras --format requirements-txt --output-file requirements.txt
       -
         name: Compile messages
         run: |
           cd src/
-          pipenv --python ${{ steps.setup-python.outputs.python-version }} run python3 manage.py compilemessages
+          uv run \
+            --python ${{ steps.setup-python.outputs.python-version }} \
+            manage.py compilemessages
       -
         name: Collect static files
         run: |
           cd src/
-          pipenv --python ${{ steps.setup-python.outputs.python-version }} run python3 manage.py collectstatic --no-input
+          uv run \
+            --python ${{ steps.setup-python.outputs.python-version }} \
+            manage.py collectstatic --no-input
       -
         name: Move files
         run: |
@@ -528,13 +516,12 @@ jobs:
           for file_name in .dockerignore \
                           .env \
                           Dockerfile \
-                          Pipfile \
-                          Pipfile.lock \
+                          pyproject.toml \
+                          uv.lock \
                           requirements.txt \
                           LICENSE \
                           README.md \
-                          paperless.conf.example \
-                          gunicorn.conf.py
+                          paperless.conf.example
           do
             cp --verbose ${file_name} dist/paperless-ngx/
           done
@@ -631,15 +618,17 @@ jobs:
           ref: main
       -
         name: Set up Python
+        id: setup-python
         uses: actions/setup-python@v5
         with:
           python-version: ${{ env.DEFAULT_PYTHON_VERSION }}
-          cache: "pipenv"
-          cache-dependency-path: 'Pipfile.lock'
       -
-        name: Install pipenv + tools
-        run: |
-          pip install --upgrade --user pipenv==${{ env.DEFAULT_PIP_ENV_VERSION }} setuptools wheel
+        name: Install uv
+        uses: astral-sh/setup-uv@v5
+        with:
+          version: ${{ env.DEFAULT_UV_VERSION }}
+          enable-cache: true
+          python-version: ${{ env.DEFAULT_PYTHON_VERSION }}
       -
         name: Append Changelog to docs
         id: append-Changelog
@@ -655,7 +644,10 @@ jobs:
           CURRENT_CHANGELOG=`tail --lines +2 changelog.md`
           echo -e "$CURRENT_CHANGELOG" >> changelog-new.md
           mv changelog-new.md changelog.md
-          pipenv run pre-commit run --files changelog.md || true
+          uv run \
+            --python ${{ steps.setup-python.outputs.python-version }} \
+            --dev \
+            pre-commit run --files changelog.md || true
           git config --global user.name "github-actions"
           git config --global user.email "41898282+github-actions[bot]@users.noreply.github.com"
           git commit -am "Changelog ${{ needs.publish-release.outputs.version }} - GHA"

.github/workflows/cleanup-tags.yml

@@ -33,7 +33,7 @@ jobs:
       -
         name: Clean temporary images
         if: "${{ env.TOKEN != '' }}"
-        uses: stumpylog/image-cleaner-action/ephemeral@v0.9.0
+        uses: stumpylog/image-cleaner-action/ephemeral@v0.10.0
         with:
           token: "${{ env.TOKEN }}"
           owner: "${{ github.repository_owner }}"
@@ -61,7 +61,7 @@ jobs:
       -
         name: Clean untagged images
         if: "${{ env.TOKEN != '' }}"
-        uses: stumpylog/image-cleaner-action/untagged@v0.9.0
+        uses: stumpylog/image-cleaner-action/untagged@v0.10.0
         with:
           token: "${{ env.TOKEN }}"
           owner: "${{ github.repository_owner }}"

.gitignore

@@ -44,6 +44,7 @@ nosetests.xml
 coverage.xml
 *,cover
 .pytest_cache
+junit.xml
 
 # Translations
 *.mo

.pre-commit-config.yaml

@@ -29,10 +29,10 @@ repos:
       - id: check-case-conflict
       - id: detect-private-key
   - repo: https://github.com/codespell-project/codespell
-    rev: v2.3.0
+    rev: v2.4.0
     hooks:
       - id: codespell
-        exclude: "(^src-ui/src/locale/)|(^src-ui/e2e/)|(^src/paperless_mail/tests/samples/)"
+        exclude: "(^src-ui/src/locale/)|(^src-ui/pnpm-lock.yaml)|(^src-ui/e2e/)|(^src/paperless_mail/tests/samples/)"
         exclude_types:
           - pofile
           - json
@@ -45,16 +45,19 @@ repos:
           - javascript
           - ts
           - markdown
-        exclude: "(^Pipfile\\.lock$)"
         additional_dependencies:
           - prettier@3.3.3
           - 'prettier-plugin-organize-imports@4.1.0'
   # Python hooks
   - repo: https://github.com/astral-sh/ruff-pre-commit
-    rev: v0.9.2
+    rev: v0.9.9
     hooks:
       - id: ruff
       - id: ruff-format
+  - repo: https://github.com/tox-dev/pyproject-fmt
+    rev: "v2.5.1"
+    hooks:
+      - id: pyproject-fmt
   # Dockerfile hooks
   - repo: https://github.com/AleksaC/hadolint-py
     rev: v2.12.0.3

.python-version

@@ -1 +0,0 @@
-3.10.15

.ruff.toml

@@ -1,85 +0,0 @@
-fix = true
-line-length = 88
-respect-gitignore = true
-src = ["src"]
-target-version = "py310"
-output-format = "grouped"
-show-fixes = true
-
-# https://docs.astral.sh/ruff/settings/
-# https://docs.astral.sh/ruff/rules/
-[lint]
-extend-select = [
-  "W",     # https://docs.astral.sh/ruff/rules/#pycodestyle-e-w
-  "I",     # https://docs.astral.sh/ruff/rules/#isort-i
-  "UP",    # https://docs.astral.sh/ruff/rules/#pyupgrade-up
-  "COM",   # https://docs.astral.sh/ruff/rules/#flake8-commas-com
-  "DJ",    # https://docs.astral.sh/ruff/rules/#flake8-django-dj
-  "EXE",   # https://docs.astral.sh/ruff/rules/#flake8-executable-exe
-  "ISC",   # https://docs.astral.sh/ruff/rules/#flake8-implicit-str-concat-isc
-  "ICN",   # https://docs.astral.sh/ruff/rules/#flake8-import-conventions-icn
-  "G201",  # https://docs.astral.sh/ruff/rules/#flake8-logging-format-g
-  "INP",   # https://docs.astral.sh/ruff/rules/#flake8-no-pep420-inp
-  "PIE",   # https://docs.astral.sh/ruff/rules/#flake8-pie-pie
-  "Q",     # https://docs.astral.sh/ruff/rules/#flake8-quotes-q
-  "RSE",   # https://docs.astral.sh/ruff/rules/#flake8-raise-rse
-  "T20",   # https://docs.astral.sh/ruff/rules/#flake8-print-t20
-  "SIM",   # https://docs.astral.sh/ruff/rules/#flake8-simplify-sim
-  "TID",   # https://docs.astral.sh/ruff/rules/#flake8-tidy-imports-tid
-  "TCH",   # https://docs.astral.sh/ruff/rules/#flake8-type-checking-tch
-  "PLC",   # https://docs.astral.sh/ruff/rules/#pylint-pl
-  "PLE",   # https://docs.astral.sh/ruff/rules/#pylint-pl
-  "RUF",   # https://docs.astral.sh/ruff/rules/#ruff-specific-rules-ruf
-  "FLY",   # https://docs.astral.sh/ruff/rules/#flynt-fly
-  "PTH",   # https://docs.astral.sh/ruff/rules/#flake8-use-pathlib-pth
-]
-ignore = ["DJ001", "SIM105", "RUF012"]
-
-[lint.per-file-ignores]
-".github/scripts/*.py" = ["E501", "INP001", "SIM117"]
-"docker/wait-for-redis.py" = ["INP001", "T201"]
-"src/documents/consumer.py" = ["PTH"]  # TODO Enable & remove
-"src/documents/file_handling.py" = ["PTH"]  # TODO Enable & remove
-"src/documents/management/commands/document_consumer.py" = ["PTH"]  # TODO Enable & remove
-"src/documents/management/commands/document_exporter.py" = ["PTH"]  # TODO Enable & remove
-"src/documents/migrations/0012_auto_20160305_0040.py" = ["PTH"]  # TODO Enable & remove
-"src/documents/migrations/0014_document_checksum.py" = ["PTH"]  # TODO Enable & remove
-"src/documents/migrations/1003_mime_types.py" = ["PTH"]  # TODO Enable & remove
-"src/documents/migrations/1012_fix_archive_files.py" = ["PTH"]  # TODO Enable & remove
-"src/documents/models.py" = ["SIM115", "PTH"]  # TODO PTH Enable & remove
-"src/documents/parsers.py" = ["PTH"]  # TODO Enable & remove
-"src/documents/signals/handlers.py" = ["PTH"]  # TODO Enable & remove
-"src/documents/tasks.py" = ["PTH"]  # TODO Enable & remove
-"src/documents/tests/test_api_app_config.py" = ["PTH"]  # TODO Enable & remove
-"src/documents/tests/test_api_bulk_download.py" = ["PTH"]  # TODO Enable & remove
-"src/documents/tests/test_api_documents.py" = ["PTH"]  # TODO Enable & remove
-"src/documents/tests/test_classifier.py" = ["PTH"]  # TODO Enable & remove
-"src/documents/tests/test_consumer.py" = ["PTH"]  # TODO Enable & remove
-"src/documents/tests/test_file_handling.py" = ["PTH"]  # TODO Enable & remove
-"src/documents/tests/test_management.py" = ["PTH"]  # TODO Enable & remove
-"src/documents/tests/test_management_consumer.py" = ["PTH"]  # TODO Enable & remove
-"src/documents/tests/test_management_exporter.py" = ["PTH"]  # TODO Enable & remove
-"src/documents/tests/test_management_thumbnails.py" = ["PTH"]  # TODO Enable & remove
-"src/documents/tests/test_migration_archive_files.py" = ["PTH"]  # TODO Enable & remove
-"src/documents/tests/test_migration_document_pages_count.py" = ["PTH"]  # TODO Enable & remove
-"src/documents/tests/test_migration_mime_type.py" = ["PTH"]  # TODO Enable & remove
-"src/documents/tests/test_sanity_check.py" = ["PTH"]  # TODO Enable & remove
-"src/documents/tests/test_tasks.py" = ["PTH"]  # TODO Enable & remove
-"src/documents/tests/test_views.py" = ["PTH"]  # TODO Enable & remove
-"src/documents/views.py" = ["PTH"]  # TODO Enable & remove
-"src/paperless/checks.py" = ["PTH"]  # TODO Enable & remove
-"src/paperless/settings.py" = ["PTH"]  # TODO Enable & remove
-"src/paperless/tests/test_checks.py" = ["PTH"]  # TODO Enable & remove
-"src/paperless/urls.py" = ["PTH"]  # TODO Enable & remove
-"src/paperless/views.py" = ["PTH"]  # TODO Enable & remove
-"src/paperless_mail/mail.py" = ["PTH"]  # TODO Enable & remove
-"src/paperless_mail/preprocessor.py" = ["PTH"]  # TODO Enable & remove
-"src/paperless_tesseract/parsers.py" = ["PTH"]  # TODO Enable & remove
-"src/paperless_tesseract/tests/test_parser.py" = ["RUF001", "PTH"]  # TODO PTH Enable & remove
-"src/paperless_tika/tests/test_live_tika.py" = ["PTH"]  # TODO Enable & remove
-"src/paperless_tika/tests/test_tika_parser.py" = ["PTH"]  # TODO Enable & remove
-"*/tests/*.py" = ["E501", "SIM117"]
-"*/migrations/*.py" = ["E501", "SIM", "T201"]
-
-[lint.isort]
-force-single-line = true

CODEOWNERS

@@ -5,5 +5,6 @@
 /src-ui/ @paperless-ngx/frontend
 
 /src/ @paperless-ngx/backend
-Pipfile* @paperless-ngx/backend
+pyproject.toml @paperless-ngx/backend
+uv.lock @paperless-ngx/backend
 *.py @paperless-ngx/backend

Dockerfile

@@ -4,15 +4,17 @@
 # Stage: compile-frontend
 # Purpose: Compiles the frontend
 # Notes:
-#  - Does NPM stuff with Typescript and such
+#  - Does PNPM stuff with Typescript and such
 FROM --platform=$BUILDPLATFORM docker.io/node:20-bookworm-slim AS compile-frontend
 
 COPY ./src-ui /src/src-ui
 
 WORKDIR /src/src-ui
 RUN set -eux \
-  && npm update npm -g \
-  && npm ci
+  && npm update -g pnpm \
+  && npm install -g corepack@latest \
+  && corepack enable \
+  && pnpm install
 
 ARG PNGX_TAG_VERSION=
 # Add the tag to the environment file if its a tagged dev build
@@ -26,28 +28,66 @@ esac
 RUN set -eux \
   && ./node_modules/.bin/ng build --configuration production
 
-# Stage: pipenv-base
-# Purpose: Generates a requirements.txt file for building
+# Stage: s6-overlay-base
+# Purpose: Installs s6-overlay and rootfs
 # Comments:
-#  - pipenv dependencies are not left in the final image
-#  - pipenv can't touch the final image somehow
-FROM --platform=$BUILDPLATFORM docker.io/python:3.12-alpine AS pipenv-base
+#  - Don't leave anything extra in here either
+FROM ghcr.io/astral-sh/uv:0.6.11-python3.12-bookworm-slim AS s6-overlay-base
 
-WORKDIR /usr/src/pipenv
+WORKDIR /usr/src/s6
 
-COPY Pipfile* ./
+# https://github.com/just-containers/s6-overlay#customizing-s6-overlay-behaviour
+ENV \
+    S6_BEHAVIOUR_IF_STAGE2_FAILS=2 \
+    S6_CMD_WAIT_FOR_SERVICES_MAXTIME=0 \
+    S6_VERBOSITY=1 \
+    PATH=/command:$PATH
+
+# Buildx provided, must be defined to use though
+ARG TARGETARCH
+ARG TARGETVARIANT
+# Lock this version
+ARG S6_OVERLAY_VERSION=3.2.0.2
+
+ARG S6_BUILD_TIME_PKGS="curl \
+                        xz-utils"
 
 RUN set -eux \
-  && echo "Installing pipenv" \
-    && python3 -m pip install --no-cache-dir --upgrade pipenv==2024.4.0 \
-  && echo "Generating requirement.txt" \
-    && pipenv requirements > requirements.txt
+    && echo "Installing build time packages" \
+      && apt-get update \
+      && apt-get install --yes --quiet --no-install-recommends ${S6_BUILD_TIME_PKGS} \
+    && echo "Determining arch" \
+      && S6_ARCH="" \
+      && if [ "${TARGETARCH}${TARGETVARIANT}" = "amd64" ]; then S6_ARCH="x86_64"; \
+      elif [ "${TARGETARCH}${TARGETVARIANT}" = "arm64" ]; then S6_ARCH="aarch64"; fi\
+      && if [ -z "${S6_ARCH}" ]; then { echo "Error: Not able to determine arch"; exit 1; }; fi \
+    && echo "Installing s6-overlay for ${S6_ARCH}" \
+      && curl --fail --silent --no-progress-meter --show-error --location --remote-name-all --parallel --parallel-max 4 \
+        "https://github.com/just-containers/s6-overlay/releases/download/v${S6_OVERLAY_VERSION}/s6-overlay-noarch.tar.xz" \
+        "https://github.com/just-containers/s6-overlay/releases/download/v${S6_OVERLAY_VERSION}/s6-overlay-noarch.tar.xz.sha256" \
+        "https://github.com/just-containers/s6-overlay/releases/download/v${S6_OVERLAY_VERSION}/s6-overlay-${S6_ARCH}.tar.xz" \
+        "https://github.com/just-containers/s6-overlay/releases/download/v${S6_OVERLAY_VERSION}/s6-overlay-${S6_ARCH}.tar.xz.sha256" \
+      && echo "Validating s6-archive checksums" \
+        && sha256sum --check ./*.sha256 \
+      && echo "Unpacking archives" \
+        && tar --directory / -Jxpf s6-overlay-noarch.tar.xz \
+        && tar --directory / -Jxpf s6-overlay-${S6_ARCH}.tar.xz \
+      && echo "Removing downloaded archives" \
+        && rm ./*.tar.xz \
+        && rm ./*.sha256 \
+    && echo "Cleaning up image" \
+      && apt-get --yes purge ${S6_BUILD_TIME_PKGS} \
+      && apt-get --yes autoremove --purge \
+      && rm -rf /var/lib/apt/lists/*
+
+# Copy our service defs and filesystem
+COPY ./docker/rootfs /
 
 # Stage: main-app
 # Purpose: The final image
 # Comments:
 #  - Don't leave anything extra in here
-FROM docker.io/python:3.12-slim-bookworm AS main-app
+FROM s6-overlay-base AS main-app
 
 LABEL org.opencontainers.image.authors="paperless-ngx team <hello@paperless-ngx.com>"
 LABEL org.opencontainers.image.documentation="https://docs.paperless-ngx.com/"
@@ -61,16 +101,19 @@ ARG DEBIAN_FRONTEND=noninteractive
 ARG TARGETARCH
 
 # Can be workflow provided, defaults set for manual building
-ARG JBIG2ENC_VERSION=0.29
+ARG JBIG2ENC_VERSION=0.30
 ARG QPDF_VERSION=11.9.0
 ARG GS_VERSION=10.03.1
 
 # Set Python environment variables
 ENV PYTHONDONTWRITEBYTECODE=1 \
     PYTHONUNBUFFERED=1 \
-    # Ignore warning from Whitenoise
+    # Ignore warning from Whitenoise about async iterators
     PYTHONWARNINGS="ignore:::django.http.response:517" \
-    PNGX_CONTAINERIZED=1
+    PNGX_CONTAINERIZED=1 \
+    # https://docs.astral.sh/uv/reference/settings/#link-mode
+    UV_LINK_MODE=copy \
+    UV_CACHE_DIR=/cache/uv/
 
 #
 # Begin installation and configuration
@@ -127,118 +170,51 @@ RUN set -eux \
     && apt-get update \
     && apt-get install --yes --quiet --no-install-recommends ${RUNTIME_PACKAGES} \
     && echo "Installing pre-built updates" \
+      && curl --fail --silent --no-progress-meter --show-error --location --remote-name-all --parallel --parallel-max 4 \
+        https://github.com/paperless-ngx/builder/releases/download/qpdf-${QPDF_VERSION}/libqpdf29_${QPDF_VERSION}-1_${TARGETARCH}.deb \
+        https://github.com/paperless-ngx/builder/releases/download/qpdf-${QPDF_VERSION}/qpdf_${QPDF_VERSION}-1_${TARGETARCH}.deb \
+        https://github.com/paperless-ngx/builder/releases/download/ghostscript-${GS_VERSION}/libgs10_${GS_VERSION}.dfsg-1_${TARGETARCH}.deb \
+        https://github.com/paperless-ngx/builder/releases/download/ghostscript-${GS_VERSION}/ghostscript_${GS_VERSION}.dfsg-1_${TARGETARCH}.deb \
+        https://github.com/paperless-ngx/builder/releases/download/ghostscript-${GS_VERSION}/libgs10-common_${GS_VERSION}.dfsg-1_all.deb \
+        https://github.com/paperless-ngx/builder/releases/download/jbig2enc-${JBIG2ENC_VERSION}/jbig2enc_${JBIG2ENC_VERSION}-1_${TARGETARCH}.deb \
       && echo "Installing qpdf ${QPDF_VERSION}" \
-        && curl --fail --silent --show-error --location \
-          --output libqpdf29_${QPDF_VERSION}-1_${TARGETARCH}.deb \
-          https://github.com/paperless-ngx/builder/releases/download/qpdf-${QPDF_VERSION}/libqpdf29_${QPDF_VERSION}-1_${TARGETARCH}.deb \
-        && curl --fail --silent --show-error --location \
-          --output qpdf_${QPDF_VERSION}-1_${TARGETARCH}.deb \
-          https://github.com/paperless-ngx/builder/releases/download/qpdf-${QPDF_VERSION}/qpdf_${QPDF_VERSION}-1_${TARGETARCH}.deb \
         && dpkg --install ./libqpdf29_${QPDF_VERSION}-1_${TARGETARCH}.deb \
         && dpkg --install ./qpdf_${QPDF_VERSION}-1_${TARGETARCH}.deb \
       && echo "Installing Ghostscript ${GS_VERSION}" \
-        && curl --fail --silent --show-error --location \
-          --output libgs10_${GS_VERSION}.dfsg-1_${TARGETARCH}.deb \
-          https://github.com/paperless-ngx/builder/releases/download/ghostscript-${GS_VERSION}/libgs10_${GS_VERSION}.dfsg-1_${TARGETARCH}.deb \
-        && curl --fail --silent --show-error --location \
-          --output ghostscript_${GS_VERSION}.dfsg-1_${TARGETARCH}.deb \
-          https://github.com/paperless-ngx/builder/releases/download/ghostscript-${GS_VERSION}/ghostscript_${GS_VERSION}.dfsg-1_${TARGETARCH}.deb \
-        && curl --fail --silent --show-error --location \
-          --output libgs10-common_${GS_VERSION}.dfsg-1_all.deb \
-          https://github.com/paperless-ngx/builder/releases/download/ghostscript-${GS_VERSION}/libgs10-common_${GS_VERSION}.dfsg-1_all.deb \
         && dpkg --install ./libgs10-common_${GS_VERSION}.dfsg-1_all.deb \
         && dpkg --install ./libgs10_${GS_VERSION}.dfsg-1_${TARGETARCH}.deb \
         && dpkg --install ./ghostscript_${GS_VERSION}.dfsg-1_${TARGETARCH}.deb \
       && echo "Installing jbig2enc" \
-        && curl --fail --silent --show-error --location \
-          --output jbig2enc_${JBIG2ENC_VERSION}-1_${TARGETARCH}.deb \
-          https://github.com/paperless-ngx/builder/releases/download/jbig2enc-${JBIG2ENC_VERSION}/jbig2enc_${JBIG2ENC_VERSION}-1_${TARGETARCH}.deb \
         && dpkg --install ./jbig2enc_${JBIG2ENC_VERSION}-1_${TARGETARCH}.deb \
+      && echo "Configuring imagemagick" \
+        && cp /etc/ImageMagick-6/paperless-policy.xml /etc/ImageMagick-6/policy.xml \
       && echo "Cleaning up image layer" \
         && rm --force --verbose *.deb \
-    && rm --recursive --force --verbose /var/lib/apt/lists/* \
-  && echo "Installing supervisor" \
-    && python3 -m pip install --default-timeout=1000 --upgrade --no-cache-dir supervisor==4.2.5
-
-# Copy gunicorn config
-# Changes very infrequently
-WORKDIR /usr/src/paperless/
-
-COPY gunicorn.conf.py .
-
-# setup docker-specific things
-# These change sometimes, but rarely
-WORKDIR /usr/src/paperless/src/docker/
-
-COPY [ \
-  "docker/imagemagick-policy.xml", \
-  "docker/supervisord.conf", \
-  "docker/docker-entrypoint.sh", \
-  "docker/docker-prepare.sh", \
-  "docker/paperless_cmd.sh", \
-  "docker/wait-for-redis.py", \
-  "docker/env-from-file.sh", \
-  "docker/management_script.sh", \
-  "docker/flower-conditional.sh", \
-  "docker/install_management_commands.sh", \
-  "/usr/src/paperless/src/docker/" \
-]
-
-RUN set -eux \
-  && echo "Configuring ImageMagick" \
-    && mv imagemagick-policy.xml /etc/ImageMagick-6/policy.xml \
-  && echo "Configuring supervisord" \
-    && mkdir /var/log/supervisord /var/run/supervisord \
-    && mv supervisord.conf /etc/supervisord.conf \
-  && echo "Setting up Docker scripts" \
-    && mv docker-entrypoint.sh /sbin/docker-entrypoint.sh \
-    && chmod 755 /sbin/docker-entrypoint.sh \
-    && mv docker-prepare.sh /sbin/docker-prepare.sh \
-    && chmod 755 /sbin/docker-prepare.sh \
-    && mv wait-for-redis.py /sbin/wait-for-redis.py \
-    && chmod 755 /sbin/wait-for-redis.py \
-    && mv env-from-file.sh /sbin/env-from-file.sh \
-    && chmod 755 /sbin/env-from-file.sh \
-    && mv paperless_cmd.sh /usr/local/bin/paperless_cmd.sh \
-    && chmod 755 /usr/local/bin/paperless_cmd.sh \
-    && mv flower-conditional.sh /usr/local/bin/flower-conditional.sh \
-    && chmod 755 /usr/local/bin/flower-conditional.sh \
-  && echo "Installing management commands" \
-    && chmod +x install_management_commands.sh \
-    && ./install_management_commands.sh
+    && rm --recursive --force --verbose /var/lib/apt/lists/*
 
 WORKDIR /usr/src/paperless/src/
 
 # Python dependencies
 # Change pretty frequently
-COPY --from=pipenv-base /usr/src/pipenv/requirements.txt ./
+COPY --chown=1000:1000 ["pyproject.toml", "uv.lock", "/usr/src/paperless/src/"]
 
 # Packages needed only for building a few quick Python
 # dependencies
 ARG BUILD_PACKAGES="\
   build-essential \
-  git \
-  # https://www.psycopg.org/docs/install.html#prerequisites
-  libpq-dev \
   # https://github.com/PyMySQL/mysqlclient#linux
   default-libmysqlclient-dev \
   pkg-config"
 
 # hadolint ignore=DL3042
-RUN --mount=type=cache,target=/root/.cache/pip/,id=pip-cache \
+RUN --mount=type=cache,target=${UV_CACHE_DIR},id=python-cache \
   set -eux \
   && echo "Installing build system packages" \
     && apt-get update \
     && apt-get install --yes --quiet --no-install-recommends ${BUILD_PACKAGES} \
-    && python3 -m pip install --no-cache-dir --upgrade wheel \
   && echo "Installing Python requirements" \
-    && curl --fail --silent --show-error --location \
-    --output psycopg_c-3.2.3-cp312-cp312-linux_x86_64.whl \
-    https://github.com/paperless-ngx/builder/releases/download/psycopg-3.2.3/psycopg_c-3.2.3-cp312-cp312-linux_x86_64.whl \
-    && curl --fail --silent --show-error --location \
-    --output psycopg_c-3.2.3-cp312-cp312-linux_aarch64.whl  \
-    https://github.com/paperless-ngx/builder/releases/download/psycopg-3.2.3/psycopg_c-3.2.3-cp312-cp312-linux_aarch64.whl \
-    && python3 -m pip install --default-timeout=1000 --find-links . --requirement requirements.txt \
+    && uv export --quiet --no-dev --all-extras --format requirements-txt --output-file requirements.txt \
+    && uv pip install --system --no-python-downloads --python-preference system --requirements requirements.txt \
   && echo "Installing NLTK data" \
     && python3 -W ignore::RuntimeWarning -m nltk.downloader -d "/usr/share/nltk_data" snowball_data \
     && python3 -W ignore::RuntimeWarning -m nltk.downloader -d "/usr/share/nltk_data" stopwords \
@@ -263,6 +239,7 @@ COPY --from=compile-frontend --chown=1000:1000 /src/src/documents/static/fronten
 # add users, setup scripts
 # Mount the compiled frontend to expected location
 RUN set -eux \
+  && sed -i '1s|^#!/usr/bin/env python3|#!/command/with-contenv python3|' manage.py \
   && echo "Setting up user/group" \
     && addgroup --gid 1000 paperless \
     && useradd --uid 1000 --gid paperless --home-dir /usr/src/paperless paperless \
@@ -276,18 +253,16 @@ RUN set -eux \
   && echo "Adjusting all permissions" \
     && chown --from root:root --changes --recursive paperless:paperless /usr/src/paperless \
   && echo "Collecting static files" \
-    && gosu paperless python3 manage.py collectstatic --clear --no-input --link \
-    && gosu paperless python3 manage.py compilemessages
+    && s6-setuidgid paperless python3 manage.py collectstatic --clear --no-input --link \
+    && s6-setuidgid paperless python3 manage.py compilemessages
 
 VOLUME ["/usr/src/paperless/data", \
         "/usr/src/paperless/media", \
         "/usr/src/paperless/consume", \
         "/usr/src/paperless/export"]
 
-ENTRYPOINT ["/sbin/docker-entrypoint.sh"]
+ENTRYPOINT ["/init"]
 
 EXPOSE 8000
 
-CMD ["/usr/local/bin/paperless_cmd.sh"]
-
 HEALTHCHECK --interval=30s --timeout=10s --retries=5 CMD [ "curl", "-fs", "-S", "--max-time", "2", "http://localhost:8000" ]

Pipfile

@@ -1,100 +0,0 @@
-[[source]]
-url = "https://pypi.python.org/simple"
-verify_ssl = true
-name = "pypi"
-
-[packages]
-dateparser = "~=1.2"
-# WARNING: django does not use semver.
-#          Only patch versions are guaranteed to not introduce breaking changes.
-django = "~=5.1.5"
-django-allauth = {extras = ["mfa", "socialaccount"], version = "*"}
-django-auditlog = "*"
-django-celery-results = "*"
-django-compression-middleware = "*"
-django-cors-headers = "*"
-django-extensions = "*"
-django-filter = "~=24.3"
-django-guardian = "*"
-django-multiselectfield = "*"
-django-soft-delete = "*"
-djangorestframework = "~=3.15.2"
-djangorestframework-guardian = "*"
-drf-writable-nested = "*"
-bleach = "*"
-celery = {extras = ["redis"], version = "*"}
-channels = "~=4.2"
-channels-redis = "*"
-concurrent-log-handler = "*"
-filelock = "*"
-flower = "*"
-gotenberg-client = "*"
-gunicorn = "*"
-httpx-oauth = "*"
-imap-tools = "*"
-inotifyrecursive = "~=0.3"
-jinja2 = "~=3.1"
-langdetect = "*"
-mysqlclient = "*"
-nltk = "*"
-ocrmypdf = "~=16.8"
-pathvalidate = "*"
-pdf2image = "*"
-psycopg = {version = "*", extras = ["c"]}
-python-dateutil = "*"
-python-dotenv = "*"
-python-gnupg = "*"
-python-ipware = "*"
-python-magic = "*"
-pyzbar = "*"
-rapidfuzz = "*"
-redis = {extras = ["hiredis"], version = "*"}
-scikit-learn = "~=1.6"
-setproctitle = "*"
-tika-client = "*"
-tqdm = "*"
-# See https://github.com/paperless-ngx/paperless-ngx/issues/5494
-uvicorn = {extras = ["standard"], version = "==0.25.0"}
-watchdog = "~=6.0"
-whitenoise = "~=6.8"
-whoosh = "~=2.7"
-zxing-cpp = {version = "*", platform_machine = "== 'x86_64'"}
-
-
-[dev-packages]
-# Linting
-pre-commit = "*"
-ruff = "*"
-factory-boy = "*"
-# Testing
-pytest = "*"
-pytest-cov = "*"
-pytest-django = "*"
-pytest-httpx = "*"
-pytest-env = "*"
-pytest-sugar = "*"
-pytest-xdist = "*"
-pytest-mock = "*"
-pytest-rerunfailures = "*"
-imagehash = "*"
-daphne = "*"
-# Documentation
-mkdocs-material = "*"
-mkdocs-glightbox = "*"
-
-[typing-dev]
-mypy = "*"
-types-Pillow = "*"
-django-filter-stubs = "*"
-types-python-dateutil = "*"
-djangorestframework-stubs = {extras= ["compatible-mypy"], version="*"}
-celery-types = "*"
-django-stubs = {extras= ["compatible-mypy"], version="*"}
-types-dateparser = "*"
-types-bleach = "*"
-types-redis = "*"
-types-tqdm = "*"
-types-Markdown = "*"
-types-Pygments = "*"
-types-colorama = "*"
-types-setuptools = "*"

docker/compose/docker-compose.ci-test.yml

@@ -5,7 +5,7 @@
 
 services:
   gotenberg:
-    image: docker.io/gotenberg/gotenberg:8.7
+    image: docker.io/gotenberg/gotenberg:8.17
     hostname: gotenberg
     container_name: gotenberg
     network_mode: host

docker/compose/docker-compose.mariadb-tika.yml

@@ -24,8 +24,8 @@
 # - Copy this file as 'docker-compose.yml' and the files 'docker-compose.env'
 #   and '.env' into a folder.
 # - Run 'docker compose pull'.
-# - Run 'docker compose run --rm webserver createsuperuser' to create a user.
 # - Run 'docker compose up -d'.
+
 #
 # For more extensive installation and update instructions, refer to the
 # documentation.
@@ -77,7 +77,7 @@ services:
       PAPERLESS_TIKA_ENDPOINT: http://tika:9998
 
   gotenberg:
-    image: docker.io/gotenberg/gotenberg:8.7
+    image: docker.io/gotenberg/gotenberg:8.17
     restart: unless-stopped
     # The gotenberg chromium route is used to convert .eml files. We do not
     # want to allow external content like tracking pixels or even javascript.

docker/compose/docker-compose.mariadb.yml

@@ -20,7 +20,6 @@
 # - Copy this file as 'docker-compose.yml' and the files 'docker-compose.env'
 #   and '.env' into a folder.
 # - Run 'docker compose pull'.
-# - Run 'docker compose run --rm webserver createsuperuser' to create a user.
 # - Run 'docker compose up -d'.
 #
 # For more extensive installation and update instructions, refer to the

docker/compose/docker-compose.portainer.yml

@@ -22,10 +22,6 @@
 # - Upload 'docker-compose.env' by clicking on 'Load variables from .env file'
 # - Modify the environment variables as needed
 # - Click 'Deploy the stack' and wait for it to be deployed
-# - Open the list of containers, select paperless_webserver_1
-# - Click 'Console' and then 'Connect' to open the command line inside the container
-# - Run 'python3 manage.py createsuperuser' to create a user
-# - Exit the console
 #
 # For more extensive installation and update instructions, refer to the
 # documentation.
@@ -38,7 +34,7 @@ services:
       - redisdata:/data
 
   db:
-    image: docker.io/library/postgres:16
+    image: docker.io/library/postgres:17
     restart: unless-stopped
     volumes:
       - pgdata:/var/lib/postgresql/data

docker/compose/docker-compose.postgres-tika.yml

@@ -24,7 +24,6 @@
 # - Copy this file as 'docker-compose.yml' and the files 'docker-compose.env'
 #   and '.env' into a folder.
 # - Run 'docker compose pull'.
-# - Run 'docker compose run --rm webserver createsuperuser' to create a user.
 # - Run 'docker compose up -d'.
 #
 # For more extensive installation and update instructions, refer to the
@@ -38,7 +37,7 @@ services:
       - redisdata:/data
 
   db:
-    image: docker.io/library/postgres:16
+    image: docker.io/library/postgres:17
     restart: unless-stopped
     volumes:
       - pgdata:/var/lib/postgresql/data
@@ -71,7 +70,7 @@ services:
       PAPERLESS_TIKA_ENDPOINT: http://tika:9998
 
   gotenberg:
-    image: docker.io/gotenberg/gotenberg:8.7
+    image: docker.io/gotenberg/gotenberg:8.17
     restart: unless-stopped
 
     # The gotenberg chromium route is used to convert .eml files. We do not

docker/compose/docker-compose.postgres.yml

@@ -20,7 +20,6 @@
 # - Copy this file as 'docker-compose.yml' and the files 'docker-compose.env'
 #   and '.env' into a folder.
 # - Run 'docker compose pull'.
-# - Run 'docker compose run --rm webserver createsuperuser' to create a user.
 # - Run 'docker compose up -d'.
 #
 # For more extensive installation and update instructions, refer to the
@@ -34,7 +33,7 @@ services:
       - redisdata:/data
 
   db:
-    image: docker.io/library/postgres:16
+    image: docker.io/library/postgres:17
     restart: unless-stopped
     volumes:
       - pgdata:/var/lib/postgresql/data

docker/compose/docker-compose.sqlite-tika.yml

@@ -24,7 +24,6 @@
 # - Copy this file as 'docker-compose.yml' and the files 'docker-compose.env'
 #   and '.env' into a folder.
 # - Run 'docker compose pull'.
-# - Run 'docker compose run --rm webserver createsuperuser' to create a user.
 # - Run 'docker compose up -d'.
 #
 # For more extensive installation and update instructions, refer to the
@@ -59,7 +58,7 @@ services:
       PAPERLESS_TIKA_ENDPOINT: http://tika:9998
 
   gotenberg:
-    image: docker.io/gotenberg/gotenberg:8.7
+    image: docker.io/gotenberg/gotenberg:8.17
     restart: unless-stopped
 
     # The gotenberg chromium route is used to convert .eml files. We do not

docker/compose/docker-compose.sqlite.yml

@@ -17,7 +17,6 @@
 # - Copy this file as 'docker-compose.yml' and the files 'docker-compose.env'
 #   and '.env' into a folder.
 # - Run 'docker compose pull'.
-# - Run 'docker compose run --rm webserver createsuperuser' to create a user.
 # - Run 'docker compose up -d'.
 #
 # For more extensive installation and update instructions, refer to the

docker/docker-prepare.sh

@@ -1,120 +0,0 @@
-#!/usr/bin/env bash
-
-set -e
-
-wait_for_postgres() {
-	local attempt_num=1
-	local -r max_attempts=5
-
-	echo "Waiting for PostgreSQL to start..."
-
-	local -r host="${PAPERLESS_DBHOST:-localhost}"
-	local -r port="${PAPERLESS_DBPORT:-5432}"
-
-	# Disable warning, host and port can't have spaces
-	# shellcheck disable=SC2086
-	while [ ! "$(pg_isready --host ${host} --port ${port})" ]; do
-
-		if [ $attempt_num -eq $max_attempts ]; then
-			echo "Unable to connect to database."
-			exit 1
-		else
-			echo "Attempt $attempt_num failed! Trying again in 5 seconds..."
-		fi
-
-		attempt_num=$(("$attempt_num" + 1))
-		sleep 5
-	done
-	echo "Connected to PostgreSQL"
-}
-
-wait_for_mariadb() {
-	echo "Waiting for MariaDB to start..."
-
-	local -r host="${PAPERLESS_DBHOST:=localhost}"
-	local -r port="${PAPERLESS_DBPORT:=3306}"
-
-	local attempt_num=1
-	local -r max_attempts=5
-
-	# Disable warning, host and port can't have spaces
-	# shellcheck disable=SC2086
-	while ! true > /dev/tcp/$host/$port; do
-
-		if [ $attempt_num -eq $max_attempts ]; then
-			echo "Unable to connect to database."
-			exit 1
-		else
-			echo "Attempt $attempt_num failed! Trying again in 5 seconds..."
-
-		fi
-
-		attempt_num=$(("$attempt_num" + 1))
-		sleep 5
-	done
-	echo "Connected to MariaDB"
-}
-
-wait_for_redis() {
-	# We use a Python script to send the Redis ping
-	# instead of installing redis-tools just for 1 thing
-	if ! python3 /sbin/wait-for-redis.py; then
-		exit 1
-	fi
-}
-
-migrations() {
-	(
-		# flock is in place to prevent multiple containers from doing migrations
-		# simultaneously. This also ensures that the db is ready when the command
-		# of the current container starts.
-		flock 200
-		echo "Apply database migrations..."
-		python3 manage.py migrate --skip-checks --no-input
-	) 200>"${DATA_DIR}/migration_lock"
-}
-
-django_checks() {
-	# Explicitly run the Django system checks
-	echo "Running Django checks"
-	python3 manage.py check
-}
-
-search_index() {
-
-	local -r index_version=9
-	local -r index_version_file=${DATA_DIR}/.index_version
-
-	if [[ (! -f "${index_version_file}") || $(<"${index_version_file}") != "$index_version" ]]; then
-		echo "Search index out of date. Updating..."
-		python3 manage.py document_index reindex --no-progress-bar
-		echo ${index_version} | tee "${index_version_file}" >/dev/null
-	fi
-}
-
-superuser() {
-	if [[ -n "${PAPERLESS_ADMIN_USER}" ]]; then
-		python3 manage.py manage_superuser
-	fi
-}
-
-do_work() {
-	if [[ "${PAPERLESS_DBENGINE}" == "mariadb" ]]; then
-		wait_for_mariadb
-	elif [[ -n "${PAPERLESS_DBHOST}" ]]; then
-		wait_for_postgres
-	fi
-
-	wait_for_redis
-
-	migrations
-
-	django_checks
-
-	search_index
-
-	superuser
-
-}
-
-do_work

docker/env-from-file.sh

@@ -1,42 +0,0 @@
-#!/usr/bin/env bash
-
-# Scans the environment variables for those with the suffix _FILE
-# When located, checks the file exists, and exports the contents
-# of the file as the same name, minus the suffix
-# This allows the use of Docker secrets or mounted files
-# to fill in any of the settings configurable via environment
-# variables
-
-set -eu
-
-for line in $(printenv)
-do
-	# Extract the name of the environment variable
-	env_name=${line%%=*}
-	# Check if it starts with "PAPERLESS_" and ends in "_FILE"
-	if [[ ${env_name} == PAPERLESS_*_FILE ]]; then
-		# This should have been named different..
-		if [[ ${env_name} == "PAPERLESS_OCR_SKIP_ARCHIVE_FILE" || ${env_name} == "PAPERLESS_MODEL_FILE" ]]; then
-			continue
-		fi
-		# Extract the value of the environment
-		env_value=${line#*=}
-
-		# Check the file exists
-		if [[ -f ${env_value} ]]; then
-
-			# Trim off the _FILE suffix
-			non_file_env_name=${env_name%"_FILE"}
-			echo "Setting ${non_file_env_name} from file"
-
-			# Reads the value from th file
-			val="$(< "${!env_name}")"
-
-			# Sets the normal name to the read file contents
-			export "${non_file_env_name}"="${val}"
-
-		else
-			echo "File ${env_value} referenced by ${env_name} doesn't exist"
-		fi
-	fi
-done

docker/flower-conditional.sh

@@ -1,12 +0,0 @@
-#!/usr/bin/env bash
-
-echo "Checking if we should start flower..."
-
-if [[ -n  "${PAPERLESS_ENABLE_FLOWER}" ]]; then
-	# Small delay to allow celery to be up first
-	echo "Starting flower in 5s"
-	sleep 5
-	celery --app paperless flower --conf=/usr/src/paperless/src/paperless/flowerconfig.py
-else
-	echo "Not starting flower"
-fi

docker/install_management_commands.sh

@@ -1,5 +1,7 @@
 #!/usr/bin/env bash
 
+# Run this script to generate the management commands again (for example if a new command is create or the template is updated)
+
 set -eu
 
 for command in decrypt_documents \
@@ -16,9 +18,10 @@ for command in decrypt_documents \
 	document_fuzzy_match \
 	manage_superuser \
 	convert_mariadb_uuid \
-	prune_audit_logs;
+	prune_audit_logs \
+	createsuperuser;
 do
 	echo "installing $command..."
-	sed "s/management_command/$command/g" management_script.sh > /usr/local/bin/$command
-	chmod +x /usr/local/bin/$command
+	sed "s/management_command/$command/g" management_script.sh >"$PWD/rootfs/usr/local/bin/$command"
+	chmod u=rwx,g=rwx,o=rx "$PWD/rootfs/usr/local/bin/$command"
 done

docker/management_script.sh

@@ -1,17 +1,13 @@
-#!/usr/bin/env bash
+#!/command/with-contenv /usr/bin/bash
+# shellcheck shell=bash
 
 set -e
 
-cd /usr/src/paperless/src/
-# This ensures environment is setup
-# shellcheck disable=SC1091
-source /sbin/env-from-file.sh
+cd "${PAPERLESS_SRC_DIR}"
 
-if [[ $(id -u) == 0 ]] ;
-then
-	gosu paperless python3 manage.py management_command "$@"
-elif [[ $(id -un) == "paperless" ]] ;
-then
+if [[ $(id -u) == 0 ]]; then
+	s6-setuidgid paperless python3 manage.py management_command "$@"
+elif [[ $(id -un) == "paperless" ]]; then
 	python3 manage.py management_command "$@"
 else
 	echo "Unknown user."

docker/paperless_cmd.sh

@@ -1,16 +0,0 @@
-#!/usr/bin/env bash
-
-SUPERVISORD_WORKING_DIR="${PAPERLESS_SUPERVISORD_WORKING_DIR:-$PWD}"
-rootless_args=()
-if [ "$(id -u)" == "$(id -u paperless)" ]; then
-	rootless_args=(
-		--user
-		paperless
-		--logfile
-		"${SUPERVISORD_WORKING_DIR}/supervisord.log"
-		--pidfile
-		"${SUPERVISORD_WORKING_DIR}/supervisord.pid"
-	)
-fi
-
-exec /usr/local/bin/supervisord -c /etc/supervisord.conf "${rootless_args[@]}"

docker/rootfs/etc/s6-overlay/s6-rc.d/init-complete/run

@@ -0,0 +1,8 @@
+#!/command/with-contenv /usr/bin/bash
+# shellcheck shell=bash
+declare -r log_prefix="[init-complete]"
+declare -r end_time=$(date +%s)
+declare -r start_time=${PAPERLESS_START_TIME_S}
+
+echo "${log_prefix} paperless-ngx docker container init completed in $(($end_time-$start_time)) seconds"
+echo "${log_prefix} Starting services"

docker/rootfs/etc/s6-overlay/s6-rc.d/init-complete/type

@@ -0,0 +1 @@
+oneshot

docker/rootfs/etc/s6-overlay/s6-rc.d/init-complete/up

@@ -0,0 +1 @@
+/etc/s6-overlay/s6-rc.d/init-complete/run

docker/rootfs/etc/s6-overlay/s6-rc.d/init-custom-init/run

@@ -0,0 +1,44 @@
+#!/command/with-contenv /usr/bin/bash
+# shellcheck shell=bash
+
+declare -r log_prefix="[custom-init]"
+
+# Mostly borrowed from the LinuxServer.io base image
+# https://github.com/linuxserver/docker-baseimage-ubuntu/tree/bionic/root/etc/cont-init.d
+declare -r custom_script_dir="/custom-cont-init.d"
+
+# Tamper checking.
+# Don't run files which are owned by anyone except root
+# Don't run files which are writeable by others
+if [ -d "${custom_script_dir}" ]; then
+	if [ -n "$(/usr/bin/find "${custom_script_dir}" -maxdepth 1 ! -user root)" ]; then
+		echo "${log_prefix} **** Potential tampering with custom scripts detected ****"
+		echo "${log_prefix} **** The folder '${custom_script_dir}' must be owned by root ****"
+		exit 0
+	fi
+	if [ -n "$(/usr/bin/find "${custom_script_dir}" -maxdepth 1 -perm -o+w)" ]; then
+		echo "${log_prefix} **** The folder '${custom_script_dir}' or some of contents have write permissions for others, which is a security risk. ****"
+		echo "${log_prefix} **** Please review the permissions and their contents to make sure they are owned by root, and can only be modified by root. ****"
+		exit 0
+	fi
+
+	# Make sure custom init directory has files in it
+	if [ -n "$(/bin/ls --almost-all "${custom_script_dir}" 2>/dev/null)" ]; then
+		echo "${log_prefix} files found in ${custom_script_dir} executing"
+		# Loop over files in the directory
+		for SCRIPT in "${custom_script_dir}"/*; do
+			NAME="$(basename "${SCRIPT}")"
+			if [ -f "${SCRIPT}" ]; then
+				echo "${log_prefix} ${NAME}: executing..."
+				/command/with-contenv /bin/bash "${SCRIPT}"
+				echo "${log_prefix} ${NAME}: exited $?"
+			elif [ ! -f "${SCRIPT}" ]; then
+				echo "${log_prefix} ${NAME}: is not a file"
+			fi
+		done
+	else
+		echo "${log_prefix} no custom files found exiting..."
+	fi
+else
+	echo "${log_prefix} ${custom_script_dir} doesn't exist, nothing to do"
+fi

docker/rootfs/etc/s6-overlay/s6-rc.d/init-custom-init/type

@@ -0,0 +1 @@
+oneshot

docker/rootfs/etc/s6-overlay/s6-rc.d/init-custom-init/up

@@ -0,0 +1 @@
+/etc/s6-overlay/s6-rc.d/init-custom-init/run

docker/rootfs/etc/s6-overlay/s6-rc.d/init-env-file/run

@@ -0,0 +1,30 @@
+#!/command/with-contenv /usr/bin/bash
+# shellcheck shell=bash
+
+declare -r log_prefix="[env-init]"
+
+echo "${log_prefix} Checking for environment from files"
+
+if find /run/s6/container_environment/*"_FILE" -maxdepth 1 > /dev/null 2>&1; then
+	for FILENAME in /run/s6/container_environment/*; do
+		if [[ "${FILENAME##*/}" == PAPERLESS_*_FILE ]]; then
+			# This should have been named different..
+			if [[ ${FILENAME} == "PAPERLESS_OCR_SKIP_ARCHIVE_FILE" || ${FILENAME} == "PAPERLESS_MODEL_FILE" ]]; then
+				continue
+			fi
+			SECRETFILE=$(cat "${FILENAME}")
+			# Check the file exists
+			if [[ -f ${SECRETFILE} ]]; then
+				# Trim off trailing _FILE
+				FILESTRIP=${FILENAME//_FILE/}
+				# Set environment variable
+				cat "${SECRETFILE}" > "${FILESTRIP}"
+				echo "${log_prefix} ${FILESTRIP##*/} set from ${FILENAME##*/}"
+			else
+				echo "${log_prefix} cannot find secret in ${FILENAME##*/}"
+			fi
+		fi
+	done
+else
+		echo "${log_prefix} No *_FILE environment found"
+fi

docker/rootfs/etc/s6-overlay/s6-rc.d/init-env-file/type

@@ -0,0 +1 @@
+oneshot

docker/rootfs/etc/s6-overlay/s6-rc.d/init-env-file/up

@@ -0,0 +1 @@
+/etc/s6-overlay/s6-rc.d/init-env-file/run

docker/rootfs/etc/s6-overlay/s6-rc.d/init-folders/run

@@ -0,0 +1,33 @@
+#!/command/with-contenv /usr/bin/bash
+# shellcheck shell=bash
+
+declare -r log_prefix="[init-folders]"
+
+declare -r export_dir="/usr/src/paperless/export"
+declare -r data_dir="${PAPERLESS_DATA_DIR:-/usr/src/paperless/data}"
+declare -r media_root_dir="${PAPERLESS_MEDIA_ROOT:-/usr/src/paperless/media}"
+declare -r consume_dir="${PAPERLESS_CONSUMPTION_DIR:-/usr/src/paperless/consume}"
+declare -r tmp_dir="${PAPERLESS_SCRATCH_DIR:=/tmp/paperless}"
+
+echo "${log_prefix} Checking for folder existence"
+
+for dir in \
+	"${export_dir}" \
+	"${data_dir}" "${data_dir}/index" \
+	"${media_root_dir}" "${media_root_dir}/documents" "${media_root_dir}/documents/originals" "${media_root_dir}/documents/thumbnails" \
+	"${consume_dir}" \
+	"${tmp_dir}"; do
+	if [[ ! -d "${dir}" ]]; then
+		mkdir --parents --verbose "${dir}"
+	fi
+done
+
+echo "${log_prefix} Adjusting file and folder permissions"
+for dir in \
+	"${export_dir}" \
+	"${data_dir}" \
+	"${media_root_dir}" \
+	"${consume_dir}" \
+	"${tmp_dir}"; do
+	find "${dir}" -not \( -user paperless -and -group paperless \) -exec chown --changes paperless:paperless {} +
+done

docker/rootfs/etc/s6-overlay/s6-rc.d/init-folders/type

@@ -0,0 +1 @@
+oneshot

docker/rootfs/etc/s6-overlay/s6-rc.d/init-folders/up

@@ -0,0 +1 @@
+/etc/s6-overlay/s6-rc.d/init-folders/run

docker/rootfs/etc/s6-overlay/s6-rc.d/init-migrations/run

@@ -0,0 +1,20 @@
+#!/command/with-contenv /usr/bin/bash
+# shellcheck shell=bash
+declare -r log_prefix="[init-migrations]"
+declare -r data_dir="${PAPERLESS_DATA_DIR:-/usr/src/paperless/data}"
+
+(
+	# flock is in place to prevent multiple containers from doing migrations
+	# simultaneously. This also ensures that the db is ready when the command
+	# of the current container starts.
+	flock 200
+	echo "${log_prefix} Apply database migrations..."
+	cd "${PAPERLESS_SRC_DIR}"
+
+	if [[ -n "${USER_IS_NON_ROOT}" ]]; then
+		exec python3 manage.py migrate --skip-checks --no-input
+	else
+		exec s6-setuidgid paperless python3 manage.py migrate --skip-checks --no-input
+	fi
+
+) 200>"${data_dir}/migration_lock"

docker/rootfs/etc/s6-overlay/s6-rc.d/init-migrations/type

@@ -0,0 +1 @@
+oneshot

docker/rootfs/etc/s6-overlay/s6-rc.d/init-migrations/up

@@ -0,0 +1 @@
+/etc/s6-overlay/s6-rc.d/init-migrations/run

docker/rootfs/etc/s6-overlay/s6-rc.d/init-modify-user/run

@@ -0,0 +1,22 @@
+#!/command/with-contenv /usr/bin/bash
+# shellcheck shell=bash
+declare -r log_prefix="[init-user]"
+
+declare -r usermap_original_uid=$(id -u paperless)
+declare -r usermap_original_gid=$(id -g paperless)
+declare -r usermap_new_uid=${USERMAP_UID:-$usermap_original_uid}
+declare -r usermap_new_gid=${USERMAP_GID:-${usermap_original_gid:-$usermap_new_uid}}
+
+if [[ ${usermap_new_uid} != "${usermap_original_uid}" ]]; then
+	echo "${log_prefix} Mapping UID for paperless to $usermap_new_uid"
+	usermod --non-unique --uid "${usermap_new_uid}" paperless
+else
+	echo "${log_prefix} No UID changes for paperless"
+fi
+
+if [[ ${usermap_new_gid} != "${usermap_original_gid}" ]]; then
+	echo "${log_prefix} Mapping GID for paperless to $usermap_new_gid"
+	groupmod --non-unique --gid "${usermap_new_gid}" paperless
+else
+	echo "${log_prefix} No GID changes for paperless"
+fi

docker/rootfs/etc/s6-overlay/s6-rc.d/init-modify-user/type

@@ -0,0 +1 @@
+oneshot

docker/rootfs/etc/s6-overlay/s6-rc.d/init-modify-user/up

@@ -0,0 +1 @@
+/etc/s6-overlay/s6-rc.d/init-modify-user/run

docker/rootfs/etc/s6-overlay/s6-rc.d/init-search-index/run

@@ -0,0 +1,28 @@
+#!/command/with-contenv /usr/bin/bash
+# shellcheck shell=bash
+
+declare -r log_prefix="[init-index]"
+
+declare -r index_version=9
+declare -r data_dir="${PAPERLESS_DATA_DIR:-/usr/src/paperless/data}"
+declare -r index_version_file="${data_dir}/.index_version"
+
+update_index () {
+	echo "${log_prefix} Search index out of date. Updating..."
+	cd "${PAPERLESS_SRC_DIR}"
+	if [[ -n "${USER_IS_NON_ROOT}" ]]; then
+		python3 manage.py document_index reindex --no-progress-bar
+		echo ${index_version} | tee "${index_version_file}" > /dev/null
+	else
+		s6-setuidgid paperless python3 manage.py document_index reindex --no-progress-bar
+		echo ${index_version} | s6-setuidgid paperless tee "${index_version_file}" > /dev/null
+	fi
+}
+
+if [[ (! -f "${index_version_file}") ]]; then
+	echo "${log_prefix} No index version file found"
+	update_index
+elif [[ $(<"${index_version_file}") != "$index_version" ]]; then
+	echo "${log_prefix} index version updated"
+	update_index
+fi

docker/rootfs/etc/s6-overlay/s6-rc.d/init-search-index/type

@@ -0,0 +1 @@
+oneshot

docker/rootfs/etc/s6-overlay/s6-rc.d/init-search-index/up

@@ -0,0 +1 @@
+/etc/s6-overlay/s6-rc.d/init-search-index/run

docker/rootfs/etc/s6-overlay/s6-rc.d/init-start/run

@@ -0,0 +1,19 @@
+#!/command/with-contenv /usr/bin/bash
+# shellcheck shell=bash
+
+declare -r log_prefix="[init-start]"
+
+echo "${log_prefix} paperless-ngx docker container starting..."
+
+# Set some directories into environment for other steps to access via environment
+# Sort of like variables for later
+printf "/usr/src/paperless/src" > /var/run/s6/container_environment/PAPERLESS_SRC_DIR
+echo $(date +%s) > /var/run/s6/container_environment/PAPERLESS_START_TIME_S
+
+# Check if we're starting as a non-root user
+if [ $(id -u) == $(id -u paperless) ]; then
+	printf "true" > /var/run/s6/container_environment/USER_IS_NON_ROOT
+	echo "${log_prefix}  paperless-ngx docker container running under a user"
+else
+	echo "${log_prefix}  paperless-ngx docker container starting init as root"
+fi

docker/rootfs/etc/s6-overlay/s6-rc.d/init-start/type

@@ -0,0 +1 @@
+oneshot

docker/rootfs/etc/s6-overlay/s6-rc.d/init-start/up

@@ -0,0 +1 @@
+/etc/s6-overlay/s6-rc.d/init-start/run

docker/rootfs/etc/s6-overlay/s6-rc.d/init-superuser/run

@@ -0,0 +1,20 @@
+#!/command/with-contenv /usr/bin/bash
+# shellcheck shell=bash
+
+declare -r log_prefix="[init-superuser]"
+
+if [[ -n "${PAPERLESS_ADMIN_USER}" ]]; then
+	echo "${log_prefix} Creating superuser..."
+	cd "${PAPERLESS_SRC_DIR}"
+
+	if [[ -n "${USER_IS_NON_ROOT}" ]]; then
+		python3 manage.py manage_superuser
+	else
+		s6-setuidgid paperless python3 manage.py manage_superuser
+	fi
+
+	echo "${log_prefix} Superuser creation done"
+
+else
+	echo "${log_prefix} Not creating superuser"
+fi

docker/rootfs/etc/s6-overlay/s6-rc.d/init-superuser/type

@@ -0,0 +1 @@
+oneshot

docker/rootfs/etc/s6-overlay/s6-rc.d/init-superuser/up

@@ -0,0 +1 @@
+/etc/s6-overlay/s6-rc.d/init-superuser/run

docker/rootfs/etc/s6-overlay/s6-rc.d/init-system-checks/run

@@ -0,0 +1,15 @@
+#!/command/with-contenv /usr/bin/bash
+# shellcheck shell=bash
+
+declare -r log_prefix="[init-checks]"
+
+# Explicitly run the Django system checks
+echo "${log_prefix} Running Django checks"
+
+cd "${PAPERLESS_SRC_DIR}"
+
+if [[ -n "${USER_IS_NON_ROOT}" ]]; then
+	python3 manage.py check
+else
+	s6-setuidgid paperless python3 manage.py check
+fi

docker/rootfs/etc/s6-overlay/s6-rc.d/init-system-checks/type

@@ -0,0 +1 @@
+oneshot

docker/rootfs/etc/s6-overlay/s6-rc.d/init-system-checks/up

@@ -0,0 +1 @@
+/etc/s6-overlay/s6-rc.d/init-system-checks/run

docker/rootfs/etc/s6-overlay/s6-rc.d/init-tesseract-langs/run

@@ -0,0 +1,65 @@
+#!/command/with-contenv /usr/bin/bash
+# shellcheck shell=bash
+
+declare -r log_prefix="[init-tesseract-langs]"
+
+install_languages() {
+	echo "Installing languages..."
+
+	read -ra langs <<<"$1"
+
+	# Check that it is not empty
+	if [ ${#langs[@]} -eq 0 ]; then
+		return
+	fi
+
+	# Build list of packages to install
+	to_install=()
+	for lang in "${langs[@]}"; do
+		pkg="tesseract-ocr-$lang"
+
+		if dpkg --status "$pkg" &>/dev/null; then
+			echo "${log_prefix} Package $pkg already installed!"
+			continue
+		else
+			to_install+=("$pkg")
+		fi
+	done
+
+	# Use apt only when we install packages
+	if [ ${#to_install[@]} -gt 0 ]; then
+
+		# Warn the user if they're not root, but try anyway
+		if [[ -n "${USER_IS_NON_ROOT}" ]]; then
+			echo "${log_prefix} ERROR: Unable to install language ${pkg} as non-root, startup may fail"
+		fi
+
+		apt-get --quiet update &>/dev/null
+
+		for pkg in "${to_install[@]}"; do
+			if ! apt-cache --quiet show "$pkg" &>/dev/null; then
+				echo "${log_prefix} Skipped $pkg: Package not found! :("
+				continue
+			fi
+			echo "${log_prefix} Installing package $pkg..."
+			if ! apt-get --quiet --assume-yes install "$pkg" &>/dev/null; then
+				echo "${log_prefix} Could not install $pkg"
+				exit 1
+			else
+				echo "${log_prefix} Installed $pkg"
+			fi
+		done
+
+	fi
+}
+
+echo "${log_prefix} Checking if additional teseract languages needed"
+
+# Install additional languages if specified
+if [[ -n "$PAPERLESS_OCR_LANGUAGES" ]]; then
+
+	install_languages "$PAPERLESS_OCR_LANGUAGES"
+	echo "${log_prefix} Additional packages installed"
+else
+	echo "${log_prefix} No additional installs requested"
+fi

docker/rootfs/etc/s6-overlay/s6-rc.d/init-tesseract-langs/type

@@ -0,0 +1 @@
+oneshot

docker/rootfs/etc/s6-overlay/s6-rc.d/init-tesseract-langs/up

@@ -0,0 +1 @@
+/etc/s6-overlay/s6-rc.d/init-tesseract-langs/run

docker/rootfs/etc/s6-overlay/s6-rc.d/init-wait-for-db/run

@@ -0,0 +1,70 @@
+#!/command/with-contenv /usr/bin/bash
+# shellcheck shell=bash
+
+declare -r log_prefix="[init-db-wait]"
+
+wait_for_postgres() {
+	local attempt_num=1
+	local -r max_attempts=5
+
+	echo "${log_prefix} Waiting for PostgreSQL to start..."
+
+	local -r host="${PAPERLESS_DBHOST:-localhost}"
+	local -r port="${PAPERLESS_DBPORT:-5432}"
+	local -r user="${PAPERLESS_DBUSER:-paperless}"
+
+	# Disable warning, host and port can't have spaces
+	# shellcheck disable=SC2086
+	while [ ! "$(pg_isready -h ${host} -p ${port} --username ${user})" ]; do
+
+		if [ $attempt_num -eq $max_attempts ]; then
+			echo "${log_prefix} Unable to connect to database."
+			exit 1
+		else
+			echo "${log_prefix} Attempt $attempt_num failed! Trying again in 5 seconds..."
+		fi
+
+		attempt_num=$(("$attempt_num" + 1))
+		sleep 5
+	done
+	# Extra in case this is a first start
+	sleep 5
+	echo "Connected to PostgreSQL"
+}
+
+wait_for_mariadb() {
+	echo "${log_prefix} Waiting for MariaDB to start..."
+
+	local -r host="${PAPERLESS_DBHOST:=localhost}"
+	local -r port="${PAPERLESS_DBPORT:=3306}"
+
+	local attempt_num=1
+	local -r max_attempts=5
+
+	# Disable warning, host and port can't have spaces
+	# shellcheck disable=SC2086
+	while ! true > /dev/tcp/$host/$port; do
+
+		if [ $attempt_num -eq $max_attempts ]; then
+			echo "${log_prefix} Unable to connect to database."
+			exit 1
+		else
+			echo "${log_prefix} Attempt $attempt_num failed! Trying again in 5 seconds..."
+
+		fi
+
+		attempt_num=$(("$attempt_num" + 1))
+		sleep 5
+	done
+	echo "Connected to MariaDB"
+}
+
+if [[ "${PAPERLESS_DBENGINE}" == "mariadb" ]]; then
+	echo "${log_prefix} Waiting for MariaDB to report ready"
+	wait_for_mariadb
+elif [[ -n "${PAPERLESS_DBHOST}" ]]; then
+	echo "${log_prefix} Waiting for postgresql to report ready"
+	wait_for_postgres
+fi
+
+	echo "${log_prefix} Database is ready"

docker/rootfs/etc/s6-overlay/s6-rc.d/init-wait-for-db/type

@@ -0,0 +1 @@
+oneshot