2.0.0-beta.1

.codespellrc

@@ -1,3 +0,0 @@
-[codespell]
-write-changes = True
-ignore-words-list = criterias,afterall,valeu,ureue,equest,ure,assertIn

.devcontainer/Dockerfile

@@ -1,180 +0,0 @@
-# syntax=docker/dockerfile:1
-
-FROM --platform=$BUILDPLATFORM docker.io/node:20-bookworm-slim as main-app
-
-ARG DEBIAN_FRONTEND=noninteractive
-
-# Buildx provided, must be defined to use though
-ARG TARGETARCH
-
-# Can be workflow provided, defaults set for manual building
-ARG JBIG2ENC_VERSION=0.29
-ARG QPDF_VERSION=11.9.0
-ARG GS_VERSION=10.03.1
-
-# Set Python environment variables
-ENV PYTHONDONTWRITEBYTECODE=1 \
-    PYTHONUNBUFFERED=1 \
-    # Ignore warning from Whitenoise
-    PYTHONWARNINGS="ignore:::django.http.response:517" \
-    PNGX_CONTAINERIZED=1
-
-#
-# Begin installation and configuration
-# Order the steps below from least often changed to most
-#
-
-# Packages need for running
-ARG RUNTIME_PACKAGES="\
-  # General utils
-  curl \
-  # Docker specific
-  gosu \
-  # Timezones support
-  tzdata \
-  # fonts for text file thumbnail generation
-  fonts-liberation \
-  gettext \
-  ghostscript \
-  gnupg \
-  icc-profiles-free \
-  imagemagick \
-  # PostgreSQL
-  postgresql-client \
-  # MySQL / MariaDB
-  mariadb-client \
-  # OCRmyPDF dependencies
-  tesseract-ocr \
-  tesseract-ocr-eng \
-  tesseract-ocr-deu \
-  tesseract-ocr-fra \
-  tesseract-ocr-ita \
-  tesseract-ocr-spa \
-  unpaper \
-  pngquant \
-  jbig2dec \
-  # lxml
-  libxml2 \
-  libxslt1.1 \
-  # itself
-  qpdf \
-  # Mime type detection
-  file \
-  libmagic1 \
-  media-types \
-  zlib1g \
-  # Barcode splitter
-  libzbar0 \
-  poppler-utils \
-  htop \
-  sudo"
-
-# Install basic runtime packages.
-# These change very infrequently
-RUN set -eux \
-  echo "Installing system packages" \
-    && apt-get update \
-    && apt-get install --yes --quiet --no-install-recommends ${RUNTIME_PACKAGES}
-
-ARG PYTHON_PACKAGES="\
-  python3 \
-  python3-pip \
-  python3-wheel \
-  pipenv \
-  ca-certificates"
-
-RUN set -eux \
-  echo "Installing python packages" \
-    && apt-get update \
-    && apt-get install --yes --quiet ${PYTHON_PACKAGES}
-
-RUN set -eux \
-  && echo "Installing pre-built updates" \
-    && echo "Installing qpdf ${QPDF_VERSION}" \
-      && curl --fail --silent --show-error --location \
-        --output libqpdf29_${QPDF_VERSION}-1_${TARGETARCH}.deb \
-        https://github.com/paperless-ngx/builder/releases/download/qpdf-${QPDF_VERSION}/libqpdf29_${QPDF_VERSION}-1_${TARGETARCH}.deb \
-      && curl --fail --silent --show-error --location \
-        --output qpdf_${QPDF_VERSION}-1_${TARGETARCH}.deb \
-        https://github.com/paperless-ngx/builder/releases/download/qpdf-${QPDF_VERSION}/qpdf_${QPDF_VERSION}-1_${TARGETARCH}.deb \
-      && dpkg --install ./libqpdf29_${QPDF_VERSION}-1_${TARGETARCH}.deb \
-      && dpkg --install ./qpdf_${QPDF_VERSION}-1_${TARGETARCH}.deb \
-    && echo "Installing Ghostscript ${GS_VERSION}" \
-      && curl --fail --silent --show-error --location \
-          --output libgs10_${GS_VERSION}.dfsg-1_${TARGETARCH}.deb \
-          https://github.com/paperless-ngx/builder/releases/download/ghostscript-${GS_VERSION}/libgs10_${GS_VERSION}.dfsg-1_${TARGETARCH}.deb \
-      && curl --fail --silent --show-error --location \
-          --output ghostscript_${GS_VERSION}.dfsg-1_${TARGETARCH}.deb \
-          https://github.com/paperless-ngx/builder/releases/download/ghostscript-${GS_VERSION}/ghostscript_${GS_VERSION}.dfsg-1_${TARGETARCH}.deb \
-      && curl --fail --silent --show-error --location \
-          --output libgs10-common_${GS_VERSION}.dfsg-1_all.deb \
-          https://github.com/paperless-ngx/builder/releases/download/ghostscript-${GS_VERSION}/libgs10-common_${GS_VERSION}.dfsg-1_all.deb \
-        && dpkg --install ./libgs10-common_${GS_VERSION}.dfsg-1_all.deb \
-        && dpkg --install ./libgs10_${GS_VERSION}.dfsg-1_${TARGETARCH}.deb \
-        && dpkg --install ./ghostscript_${GS_VERSION}.dfsg-1_${TARGETARCH}.deb \
-    && echo "Installing jbig2enc" \
-      && curl --fail --silent --show-error --location \
-        --output jbig2enc_${JBIG2ENC_VERSION}-1_${TARGETARCH}.deb \
-        https://github.com/paperless-ngx/builder/releases/download/jbig2enc-${JBIG2ENC_VERSION}/jbig2enc_${JBIG2ENC_VERSION}-1_${TARGETARCH}.deb \
-      && dpkg --install ./jbig2enc_${JBIG2ENC_VERSION}-1_${TARGETARCH}.deb
-
-# setup docker-specific things
-# These change sometimes, but rarely
-WORKDIR /usr/src/paperless/src/docker/
-
-COPY [ \
-  "docker/imagemagick-policy.xml", \
-  "./" \
-]
-
-RUN set -eux \
-  && echo "Configuring ImageMagick" \
-    && mv imagemagick-policy.xml /etc/ImageMagick-6/policy.xml
-
-# Packages needed only for building a few quick Python
-# dependencies
-ARG BUILD_PACKAGES="\
-  build-essential \
-  git \
-  # https://www.psycopg.org/docs/install.html#prerequisites
-  libpq-dev \
-  # https://github.com/PyMySQL/mysqlclient#linux
-  default-libmysqlclient-dev \
-  pkg-config \
-  pre-commit"
-
-# hadolint ignore=DL3042
-RUN --mount=type=cache,target=/root/.cache/pip/,id=pip-cache \
-  set -eux \
-  && echo "Installing build system packages" \
-    && apt-get update \
-    && apt-get install --yes --quiet ${BUILD_PACKAGES}
-
-RUN set -eux \
-  && npm update npm -g
-
-# add users, setup scripts
-# Mount the compiled frontend to expected location
-RUN set -eux \
-  && echo "Setting up user/group" \
-    && groupmod --new-name paperless node \
-    && usermod --login paperless --home /usr/src/paperless node \
-    && usermod -s /bin/bash paperless \
-    && echo "paperless ALL=(ALL) NOPASSWD:ALL" >> /etc/sudoers \
-  && echo "Creating volume directories" \
-    && mkdir --parents --verbose /usr/src/paperless/paperless-ngx/data \
-    && mkdir --parents --verbose /usr/src/paperless/paperless-ngx/media \
-    && mkdir --parents --verbose /usr/src/paperless/paperless-ngx/consume \
-    && mkdir --parents --verbose /usr/src/paperless/paperless-ngx/export \
-    && mkdir --parents --verbose /usr/src/paperless/paperless-ngx/.venv \
-  && echo "Adjusting all permissions" \
-    && chown --from root:root --changes --recursive paperless:paperless /usr/src/paperless
-#  && echo "Collecting static files" \
-#    && gosu paperless python3 manage.py collectstatic --clear --no-input --link \
-#    && gosu paperless python3 manage.py compilemessages
-
-VOLUME ["/usr/src/paperless/paperless-ngx/data", \
-        "/usr/src/paperless/paperless-ngx/media", \
-        "/usr/src/paperless/paperless-ngx/consume", \
-        "/usr/src/paperless/paperless-ngx/export", \
-        "/usr/src/paperless/paperless-ngx/.venv"]

.devcontainer/README.md

@@ -1,117 +0,0 @@
-# Paperless NGX Development Environment
-
-## Overview
-
-Welcome to the Paperless NGX development environment! This setup uses VSCode DevContainers to provide a consistent and seamless development experience.
-
-### What are DevContainers?
-
-DevContainers are a feature in VSCode that allows you to develop within a Docker container. This ensures that your development environment is consistent across different machines and setups. By defining a containerized environment, you can eliminate the "works on my machine" problem.
-
-### Advantages of DevContainers
-
-- **Consistency**: Same environment for all developers.
-- **Isolation**: Separate development environment from your local machine.
-- **Reproducibility**: Easily recreate the environment on any machine.
-- **Pre-configured Tools**: Include all necessary tools and dependencies in the container.
-
-## DevContainer Setup
-
-The DevContainer configuration provides up all the necessary services for Paperless NGX, including:
-
-- Redis
-- Gotenberg
-- Tika
-
-Data is stored using Docker volumes to ensure persistence across container restarts.
-
-## Configuration Files
-
-The setup includes debugging configurations (`launch.json`) and tasks (`tasks.json`) to help you manage and debug various parts of the project:
-
-- **Backend Debugging:**
-  - `manage.py runserver`
-  - `manage.py document-consumer`
-  - `celery`
-- **Maintenance Tasks:**
-  - Create superuser
-  - Run migrations
-  - Recreate virtual environment (`.venv` with pipenv)
-  - Compile frontend assets
-
-## Getting Started
-
-### Step 1: Running the DevContainer
-
-To start the DevContainer:
-
-1. Open VSCode.
-2. Open the project folder.
-3. Open the command palette:
-   - **Windows/Linux**: `Ctrl+Shift+P`
-   - **Mac**: `Cmd+Shift+P`
-4. Type and select `Dev Containers: Rebuild and Reopen in Container`.
-
-VSCode will build and start the DevContainer environment.
-
-### Step 2: Initial Setup
-
-Once the DevContainer is up and running, perform the following steps:
-
-1. **Compile Frontend Assets**:
-
-   - Open the command palette:
-     - **Windows/Linux**: `Ctrl+Shift+P`
-     - **Mac**: `Cmd+Shift+P`
-   - Select `Tasks: Run Task`.
-   - Choose `Frontend Compile`.
-
-2. **Run Database Migrations**:
-
-   - Open the command palette:
-     - **Windows/Linux**: `Ctrl+Shift+P`
-     - **Mac**: `Cmd+Shift+P`
-   - Select `Tasks: Run Task`.
-   - Choose `Migrate Database`.
-
-3. **Create Superuser**:
-   - Open the command palette:
-     - **Windows/Linux**: `Ctrl+Shift+P`
-     - **Mac**: `Cmd+Shift+P`
-   - Select `Tasks: Run Task`.
-   - Choose `Create Superuser`.
-
-### Debugging and Running Services
-
-You can start and debug backend services either as debugging sessions via `launch.json` or as tasks.
-
-#### Using `launch.json`:
-
-1. Press `F5` or go to the **Run and Debug** view in VSCode.
-2. Select the desired configuration:
-   - `Runserver`
-   - `Document Consumer`
-   - `Celery`
-
-#### Using Tasks:
-
-1. Open the command palette:
-   - **Windows/Linux**: `Ctrl+Shift+P`
-   - **Mac**: `Cmd+Shift+P`
-2. Select `Tasks: Run Task`.
-3. Choose the desired task:
-   - `Runserver`
-   - `Document Consumer`
-   - `Celery`
-
-### Additional Maintenance Tasks
-
-Additional tasks are available for common maintenance operations:
-
-- **Recreate .venv**: For setting up the virtual environment using pipenv.
-- **Migrate Database**: To apply database migrations.
-- **Create Superuser**: To create an admin user for the application.
-
-## Let's Get Started!
-
-Follow the steps above to get your development environment up and running. Happy coding!

.devcontainer/devcontainer.json

@@ -1,16 +0,0 @@
-{
-    "name": "Paperless Development",
-    "dockerComposeFile": "docker-compose.devcontainer.sqlite-tika.yml",
-    "service": "paperless-development",
-    "workspaceFolder": "/usr/src/paperless/paperless-ngx",
-    "postCreateCommand": "/bin/bash -c pre-commit install && pipenv install --dev",
-    "customizations": {
-        "vscode": {
-            "extensions": [
-              "mhutchie.git-graph",
-              "ms-python.python"
-            ]
-        }
-    },
-    "remoteUser": "paperless"
-  }

.devcontainer/docker-compose.devcontainer.sqlite-tika.yml

@@ -1,84 +0,0 @@
-# Docker Compose file for developing Paperless NGX in VSCode DevContainers.
-# This file contains everything Paperless NGX needs to run.
-# Paperless supports amd64, arm, and arm64 hardware.
-# All compose files of Paperless configure it in the following way:
-#
-# - Paperless is (re)started on system boot if it was running before shutdown.
-# - Docker volumes for storing data are managed by Docker.
-# - Folders for importing and exporting files are created in the same directory
-#   as this file and mounted to the correct folders inside the container.
-# - Paperless listens on port 8000.
-#
-# SQLite is used as the database. The SQLite file is stored in the data volume.
-#
-# In addition, this Docker Compose file adds the following optional
-# configurations:
-#
-# - Apache Tika and Gotenberg servers are started with Paperless NGX and Paperless
-#   is configured to use these services. These provide support for consuming
-#   Office documents (Word, Excel, PowerPoint, and their LibreOffice counterparts).
-#
-# This file is intended only to be used through VSCOde devcontainers. See README.md
-# in the folder .devcontainer.
-
-
-services:
-  broker:
-    image: docker.io/library/redis:7
-    restart: unless-stopped
-    volumes:
-      - redisdata:/data
-
-  # No ports need to be exposed; the VSCode DevContainer plugin manages them.
-  paperless-development:
-    image: paperless-ngx
-    build:
-      context: ../    # Dockerfile cannot access files from parent directories if context is not set.
-      dockerfile: ./.devcontainer/Dockerfile
-    restart: unless-stopped
-    depends_on:
-      - broker
-      - gotenberg
-      - tika
-    volumes:
-      - ..:/usr/src/paperless/paperless-ngx:delegated
-      - ../.devcontainer/vscode:/usr/src/paperless/paperless-ngx/.vscode:delegated # VSCode config files
-      - pipenv:/usr/src/paperless/paperless-ngx/.venv # Pipenv environment persisted in volume
-      - /usr/src/paperless/paperless-ngx/src/documents/static/frontend # Static frontend files exist only in container
-      - /usr/src/paperless/paperless-ngx/src/.pytest_cache
-      - /usr/src/paperless/paperless-ngx/.ruff_cache
-      - /usr/src/paperless/paperless-ngx/htmlcov
-      - /usr/src/paperless/paperless-ngx/.coverage
-      - data:/usr/src/paperless/paperless-ngx/data
-      - media:/usr/src/paperless/paperless-ngx/media
-    environment:
-      PAPERLESS_REDIS: redis://broker:6379
-      PAPERLESS_TIKA_ENABLED: 1
-      PAPERLESS_TIKA_GOTENBERG_ENDPOINT: http://gotenberg:3000
-      PAPERLESS_TIKA_ENDPOINT: http://tika:9998
-      PAPERLESS_STATICDIR: ./src/documents/static
-      PAPERLESS_DEBUG: true
-
-    # Overrides default command so things don't shut down after the process ends.
-    command: /bin/sh -c "chown -R paperless:paperless /usr/src/paperless/paperless-ngx/src/documents/static/frontend && chown -R paperless:paperless /usr/src/paperless/paperless-ngx/.ruff_cache && while sleep 1000; do :; done"
-
-  gotenberg:
-    image: docker.io/gotenberg/gotenberg:7.10
-    restart: unless-stopped
-
-    # The Gotenberg Chromium route is used to convert .eml files. We do not
-    # want to allow external content like tracking pixels or even JavaScript.
-    command:
-      - "gotenberg"
-      - "--chromium-disable-javascript=true"
-      - "--chromium-allow-list=file:///tmp/.*"
-
-  tika:
-    image: docker.io/apache/tika:latest
-    restart: unless-stopped
-
-volumes:
-  data:
-  media:
-  redisdata:
-  pipenv:

.devcontainer/vscode/launch.json

@@ -1,43 +0,0 @@
-{
-    "version": "0.2.0",
-    "configurations": [
-        {
-            "name": "manage.py runserver",
-            "type": "python",
-            "request": "launch",
-            "program": "${workspaceFolder}/src/manage.py",
-            "console": "integratedTerminal",
-            "justMyCode": true,
-            "args": ["runserver"],
-            "django": true
-        },
-        {
-            "name": "manage.py document_consumer",
-            "type": "python",
-            "request": "launch",
-            "program": "${workspaceFolder}/src/manage.py",
-            "console": "integratedTerminal",
-            "justMyCode": true,
-            "args": ["document_consumer"],
-            "django": true
-        },
-        {
-            "name": "celery",
-            "type": "python",
-            "cwd": "${workspaceFolder}/src",
-            "request": "launch",
-            "module": "celery",
-            "console": "integratedTerminal",
-            "env": {
-                "PYTHONPATH": "${workspaceFolder}/src"
-              },
-            "args": [
-                "-A",
-                "paperless",
-                "worker",
-                "-l",
-                "DEBUG"
-            ]
-        }
-    ]
-}

.devcontainer/vscode/settings.json

@@ -1,11 +0,0 @@
-{
-    "python.testing.pytestArgs": [
-        "src"
-    ],
-    "python.testing.unittestEnabled": false,
-    "python.testing.pytestEnabled": true,
-    "files.watcherExclude": {
-        "**/.venv/**": true,
-        "**/pytest_cache/**": true
-    }
-}

.devcontainer/vscode/tasks.json

@@ -1,136 +0,0 @@
-{
-	"version": "2.0.0",
-	"tasks": [
-	{
-		"label": "manage.py document_consumer",
-		"type": "shell",
-		"command": "pipenv run python manage.py document_consumer",
-		"group": "build",
-		"presentation": {
-			"echo": true,
-			"reveal": "always",
-			"focus": false,
-			"panel": "shared",
-			"showReuseMessage": false,
-			"clear": true,
-			"revealProblems": "onProblem"
-		},
-		"options": {
-			"cwd": "${workspaceFolder}/src"
-		}
-
-		},
-		{
-			"label": "manage.py runserver",
-			"type": "shell",
-			"command": "pipenv run python manage.py runserver",
-			"group": "build",
-			"presentation": {
-				"echo": true,
-				"reveal": "always",
-				"focus": false,
-				"panel": "shared",
-				"showReuseMessage": false,
-				"clear": true,
-				"revealProblems": "onProblem"
-			},
-			"options": {
-				"cwd": "${workspaceFolder}/src"
-			}
-
-			},
-	  {
-		"label": "Maintenance: manage.py migrate",
-		"type": "shell",
-		"command": "pipenv run python manage.py migrate",
-		"group": "none",
-		"presentation": {
-			"echo": true,
-			"reveal": "always",
-			"focus": true,
-			"panel": "shared",
-			"showReuseMessage": false,
-			"clear": true,
-			"revealProblems": "onProblem"
-		},
-		"options": {
-			"cwd": "${workspaceFolder}/src"
-		}
-	  },
-	  {
-		"label": "Maintenance: manage.py createsuperuser",
-		"type": "shell",
-		"command": "pipenv run python manage.py createsuperuser",
-		"group": "none",
-		"presentation": {
-			"echo": true,
-			"reveal": "always",
-			"focus": true,
-			"panel": "shared",
-			"showReuseMessage": false,
-			"clear": true,
-			"revealProblems": "onProblem"
-		},
-		"options": {
-			"cwd": "${workspaceFolder}/src"
-		}
-	  },
-	  {
-		"label": "compile frontend",
-		"type": "shell",
-		"command": "npm ci && ./node_modules/.bin/ng build --configuration production",
-		"group": "none",
-		"presentation": {
-			"echo": true,
-			"reveal": "always",
-			"focus": true,
-			"panel": "shared",
-			"showReuseMessage": false,
-			"clear": true,
-			"revealProblems": "onProblem"
-		},
-		"options": {
-			"cwd": "${workspaceFolder}/src-ui"
-		}
-	  },
-	  {
-		"label": "Maintenance: recreate .venv",
-		"type": "shell",
-		"command": "rm -R -v .venv/* || pipenv install --dev",
-		"group": "none",
-		"presentation": {
-			"echo": true,
-			"reveal": "always",
-			"focus": true,
-			"panel": "shared",
-			"showReuseMessage": false,
-			"clear": true,
-			"revealProblems": "onProblem"
-		},
-		"options": {
-			"cwd": "${workspaceFolder}"
-		}
-	  },
-	  {
-		"label": "Celery Worker",
-		"type": "shell",
-		"command": "pipenv run celery --app paperless worker -l DEBUG",
-		"group": {
-		  "kind": "build",
-		  "isDefault": true
-		},
-		"presentation": {
-			"echo": true,
-			"reveal": "always",
-			"focus": true,
-			"panel": "shared",
-			"showReuseMessage": false,
-			"clear": true,
-			"revealProblems": "onProblem"
-		},
-		"options": {
-			"cwd": "${workspaceFolder}/src"
-		}
-	  }
-	]
-  }

.env

@@ -1 +1,2 @@
 COMPOSE_PROJECT_NAME=paperless
+export PROMPT="(pipenv-projectname)$P$G"

.github/ISSUE_TEMPLATE/bug-report.yml

@@ -9,7 +9,7 @@ body:
         ### ⚠️ Please remember: issues are for *bugs*
         That is, something you believe affects every single user of Paperless-ngx, not just you. If you're not sure, start with one of the other options below.
 
-        Also, note that **Paperless-ngx does not perform OCR or archive file creation itself**, those are handled by other tools. Problems with OCR or archive versions of specific files should likely be raised 'upstream', see https://github.com/ocrmypdf/OCRmyPDF/issues or https://github.com/tesseract-ocr/tesseract/issues
+        Also, note that **Paperless-ngx does not perform OCR itself**, that is handled by other tools. Problems with OCR of specific files should likely be raised 'upstream', see https://github.com/ocrmypdf/OCRmyPDF/issues or https://github.com/tesseract-ocr/tesseract/issues
   - type: markdown
     attributes:
       value: |
@@ -20,7 +20,7 @@ body:
         - [The troubleshooting documentation](https://docs.paperless-ngx.com/troubleshooting/).
         - [The installation instructions](https://docs.paperless-ngx.com/setup/#installation).
         - [Existing issues and discussions](https://github.com/paperless-ngx/paperless-ngx/search?q=&type=issues).
-        - Disable any custom container initialization scripts, if using
+        - Disable any customer container initialization scripts, if using
 
         If you encounter issues while installing or configuring Paperless-ngx, please post in the ["Support" section of the discussions](https://github.com/paperless-ngx/paperless-ngx/discussions/new?category=support).
   - type: textarea
@@ -86,12 +86,6 @@ body:
       description: Note there are significant differences from the official image and linuxserver.io, please check if your issue is specific to the third-party image.
     validations:
       required: true
-  - type: textarea
-    id: system-status
-    attributes:
-      label: System status
-      description: If available, copy & paste the system status output from Settings > System Status > Copy
-      render: json
   - type: input
     id: browser
     attributes:
@@ -103,14 +97,8 @@ body:
     attributes:
       label: Configuration changes
       description: Any configuration changes you made in `docker-compose.yml`, `docker-compose.env` or `paperless.conf`.
-  - type: checkboxes
-    id: required-checks
+  - type: input
+    id: other
     attributes:
-      label: Please confirm the following
-      options:
-        - label: I believe this issue is a bug that affects all users of Paperless-ngx, not something specific to my installation.
-          required: true
-        - label: I have already searched for relevant existing issues and discussions before opening this report.
-          required: true
-        - label: I have updated the title field above with a concise description.
-          required: true
+      label: Other
+      description: Any other relevant details.

.github/PULL_REQUEST_TEMPLATE.md

@@ -8,11 +8,7 @@ Note: All PRs with code changes should be targeted to the `dev` branch, pure doc
 Please include a summary of the change and which issue is fixed (if any) and any relevant motivation / context. List any dependencies that are required for this change. If appropriate, please include an explanation of how your proposed change can be tested. Screenshots and / or videos can also be helpful if appropriate.
 -->
 
-<!--
-⚠️ Important: Pull requests that implement a new feature or enhancement *should almost always target an existing feature request* with evidence of community interest and discussion. This is in order to balance the work of implementing and maintaining new features / enhancements. If that is not currently the case, please open a feature request instead of this PR to gather feedback from both users and the project maintainers.
--->
-
-Closes #(issue or discussion)
+Fixes # (issue)
 
 ## Type of change
 
@@ -21,11 +17,10 @@ What type of change does your PR introduce to Paperless-ngx?
 NOTE: Please check only one box!
 -->
 
-- [ ] Bug fix: non-breaking change which fixes an issue.
-- [ ] New feature / Enhancement: non-breaking change which adds functionality. _Please read the important note above._
-- [ ] Breaking change: fix or feature that would cause existing functionality to not work as expected.
-- [ ] Documentation only.
-- [ ] Other. Please explain:
+- [ ] Bug fix (non-breaking change which fixes an issue)
+- [ ] New feature (non-breaking change which adds functionality)
+- [ ] Breaking change (fix or feature that would cause existing functionality to not work as expected)
+- [ ] Other (please explain):
 
 ## Checklist:
 

.github/dependabot.yml

@@ -47,12 +47,11 @@ updates:
     # Add reviewers
     reviewers:
       - "paperless-ngx/backend"
-    ignore:
-      - dependency-name: "uvicorn"
     groups:
       development:
         patterns:
           - "*pytest*"
+          - "black"
           - "ruff"
           - "mkdocs-material"
       django:

.github/workflows/ci.yml

@@ -16,7 +16,7 @@ on:
 env:
   # This is the version of pipenv all the steps will use
   # If changing this, change Dockerfile
-  DEFAULT_PIP_ENV_VERSION: "2024.0.1"
+  DEFAULT_PIP_ENV_VERSION: "2023.10.24"
   # This is the default version of Python to use in most steps which aren't specific
   DEFAULT_PYTHON_VERSION: "3.10"
 
@@ -37,15 +37,15 @@ jobs:
         uses: actions/checkout@v4
       -
         name: Install python
-        uses: actions/setup-python@v5
+        uses: actions/setup-python@v4
         with:
           python-version: ${{ env.DEFAULT_PYTHON_VERSION }}
       -
         name: Check files
-        uses: pre-commit/action@v3.0.1
+        uses: pre-commit/action@v3.0.0
 
   documentation:
-    name: "Build & Deploy Documentation"
+    name: "Build Documentation"
     runs-on: ubuntu-22.04
     needs:
       - pre-commit
@@ -56,7 +56,7 @@ jobs:
       -
         name: Set up Python
         id: setup-python
-        uses: actions/setup-python@v5
+        uses: actions/setup-python@v4
         with:
           python-version: ${{ env.DEFAULT_PYTHON_VERSION }}
           cache: "pipenv"
@@ -77,22 +77,33 @@ jobs:
         name: Make documentation
         run: |
           pipenv --python ${{ steps.setup-python.outputs.python-version }} run mkdocs build --config-file ./mkdocs.yml
-      -
-        name: Deploy documentation
-        if: github.event_name == 'push' && github.ref == 'refs/heads/main'
-        run: |
-          echo "docs.paperless-ngx.com" > "${{ github.workspace }}/docs/CNAME"
-          git config --global user.name "${{ github.actor }}"
-          git config --global user.email "${{ github.actor }}@users.noreply.github.com"
-          pipenv --python ${{ steps.setup-python.outputs.python-version }} run mkdocs gh-deploy --force --no-history
       -
         name: Upload artifact
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v3
         with:
           name: documentation
           path: site/
           retention-days: 7
 
+  documentation-deploy:
+    name: "Deploy Documentation"
+    runs-on: ubuntu-22.04
+    if: github.event_name == 'push' && github.ref == 'refs/heads/main'
+    needs:
+      - documentation
+    steps:
+      -
+        name: Checkout
+        uses: actions/checkout@v4
+      -
+        name: Deploy docs
+        uses: mhausenblas/mkdocs-deploy-gh-pages@master
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+          CUSTOM_DOMAIN: docs.paperless-ngx.com
+          CONFIG_FILE: mkdocs.yml
+          EXTRA_PACKAGES: build-base
+
   tests-backend:
     name: "Backend Tests (Python ${{ matrix.python-version }})"
     runs-on: ubuntu-22.04
@@ -109,12 +120,12 @@ jobs:
       -
         name: Start containers
         run: |
-          docker compose --file ${{ github.workspace }}/docker/compose/docker-compose.ci-test.yml pull --quiet
-          docker compose --file ${{ github.workspace }}/docker/compose/docker-compose.ci-test.yml up --detach
+          docker compose --file ${GITHUB_WORKSPACE}/docker/compose/docker-compose.ci-test.yml pull --quiet
+          docker compose --file ${GITHUB_WORKSPACE}/docker/compose/docker-compose.ci-test.yml up --detach
       -
         name: Set up Python
         id: setup-python
-        uses: actions/setup-python@v5
+        uses: actions/setup-python@v4
         with:
           python-version: "${{ matrix.python-version }}"
           cache: "pipenv"
@@ -155,7 +166,7 @@ jobs:
       -
         name: Upload coverage
         if: ${{ matrix.python-version == env.DEFAULT_PYTHON_VERSION }}
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v3
         with:
           name: backend-coverage-report
           path: src/coverage.xml
@@ -165,11 +176,11 @@ jobs:
         name: Stop containers
         if: always()
         run: |
-          docker compose --file ${{ github.workspace }}/docker/compose/docker-compose.ci-test.yml logs
-          docker compose --file ${{ github.workspace }}/docker/compose/docker-compose.ci-test.yml down
+          docker compose --file ${GITHUB_WORKSPACE}/docker/compose/docker-compose.ci-test.yml logs
+          docker compose --file ${GITHUB_WORKSPACE}/docker/compose/docker-compose.ci-test.yml down
 
   install-frontend-depedendencies:
-    name: "Install Frontend Dependencies"
+    name: "Install Frontend Dependendencies"
     runs-on: ubuntu-22.04
     needs:
       - pre-commit
@@ -182,9 +193,9 @@ jobs:
           node-version: 20.x
           cache: 'npm'
           cache-dependency-path: 'src-ui/package-lock.json'
-      - name: Cache frontend dependencies
+      - name: Cache frontend depdendencies
         id: cache-frontend-deps
-        uses: actions/cache@v4
+        uses: actions/cache@v3
         with:
           path: |
             ~/.npm
@@ -219,9 +230,9 @@ jobs:
           node-version: 20.x
           cache: 'npm'
           cache-dependency-path: 'src-ui/package-lock.json'
-      - name: Cache frontend dependencies
+      - name: Cache frontend depdendencies
         id: cache-frontend-deps
-        uses: actions/cache@v4
+        uses: actions/cache@v3
         with:
           path: |
             ~/.npm
@@ -238,7 +249,7 @@ jobs:
       -
         name: Upload Jest coverage
         if: always()
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v3
         with:
           name: jest-coverage-report-${{ matrix.shard-index }}
           path: |
@@ -253,9 +264,9 @@ jobs:
       -
         name: Upload Playwright test results
         if: always()
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v3
         with:
-          name: playwright-report-${{ matrix.shard-index }}
+          name: playwright-report
           path: src-ui/playwright-report
           retention-days: 7
 
@@ -269,21 +280,13 @@ jobs:
       -
         uses: actions/checkout@v4
       -
-        name: Download frontend jest coverage
-        uses: actions/download-artifact@v4
+        name: Download frontend coverage
+        uses: actions/download-artifact@v3
         with:
           path: src-ui/coverage/
-          pattern: jest-coverage-report-*
-      -
-        name: Download frontend playwright coverage
-        uses: actions/download-artifact@v4
-        with:
-          path: src-ui/coverage/
-          pattern: playwright-report-*
-          merge-multiple: true
       -
         name: Upload frontend coverage to Codecov
-        uses: codecov/codecov-action@v4
+        uses: codecov/codecov-action@v3
         with:
           # not required for public repos, but intermittently fails otherwise
           token: ${{ secrets.CODECOV_TOKEN }}
@@ -293,13 +296,13 @@ jobs:
           files: '!coverage.xml'
       -
         name: Download backend coverage
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@v3
         with:
           name: backend-coverage-report
           path: src/
       -
         name: Upload coverage to Codecov
-        uses: codecov/codecov-action@v4
+        uses: codecov/codecov-action@v3
         with:
           # not required for public repos, but intermittently fails otherwise
           token: ${{ secrets.CODECOV_TOKEN }}
@@ -310,7 +313,7 @@ jobs:
   build-docker-image:
     name: Build Docker image for ${{ github.ref_name }}
     runs-on: ubuntu-22.04
-    if: github.event_name == 'push' && (startsWith(github.ref, 'refs/heads/feature-') || startsWith(github.ref, 'refs/heads/fix-') || github.ref == 'refs/heads/dev' || github.ref == 'refs/heads/beta' || contains(github.ref, 'beta.rc') || startsWith(github.ref, 'refs/tags/v'))
+    if: github.event_name == 'push' && (startsWith(github.ref, 'refs/heads/feature-') || github.ref == 'refs/heads/dev' || github.ref == 'refs/heads/beta' || contains(github.ref, 'beta.rc') || startsWith(github.ref, 'refs/tags/v'))
     concurrency:
       group: ${{ github.workflow }}-build-docker-image-${{ github.ref_name }}
       cancel-in-progress: true
@@ -398,7 +401,7 @@ jobs:
           password: ${{ secrets.QUAY_ROBOT_TOKEN }}
       -
         name: Build and push
-        uses: docker/build-push-action@v6
+        uses: docker/build-push-action@v5
         with:
           context: .
           file: ./Dockerfile
@@ -406,8 +409,6 @@ jobs:
           push: ${{ github.event_name != 'pull_request' }}
           tags: ${{ steps.docker-meta.outputs.tags }}
           labels: ${{ steps.docker-meta.outputs.labels }}
-          build-args: |
-            PNGX_TAG_VERSION=${{ steps.docker-meta.outputs.version }}
           # Get cache layers from this branch, then dev
           # This allows new branches to get at least some cache benefits, generally from dev
           cache-from: |
@@ -426,7 +427,7 @@ jobs:
           docker cp frontend-extract:/usr/src/paperless/src/documents/static/frontend src/documents/static/frontend/
       -
         name: Upload frontend artifact
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v3
         with:
           name: frontend-compiled
           path: src/documents/static/frontend/
@@ -436,7 +437,6 @@ jobs:
     name: "Build Release"
     needs:
       - build-docker-image
-      - documentation
     runs-on: ubuntu-22.04
     steps:
       -
@@ -445,7 +445,7 @@ jobs:
       -
         name: Set up Python
         id: setup-python
-        uses: actions/setup-python@v5
+        uses: actions/setup-python@v4
         with:
           python-version: ${{ env.DEFAULT_PYTHON_VERSION }}
           cache: "pipenv"
@@ -471,13 +471,13 @@ jobs:
           sudo apt-get install -qq --no-install-recommends gettext liblept5
       -
         name: Download frontend artifact
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@v3
         with:
           name: frontend-compiled
           path: src/documents/static/frontend/
       -
         name: Download documentation artifact
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@v3
         with:
           name: documentation
           path: docs/_build/html/
@@ -543,7 +543,7 @@ jobs:
           tar -cJf paperless-ngx.tar.xz paperless-ngx/
       -
         name: Upload release artifact
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v3
         with:
           name: release
           path: dist/paperless-ngx.tar.xz
@@ -562,7 +562,7 @@ jobs:
     steps:
       -
         name: Download release artifact
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@v3
         with:
           name: release
           path: ./
@@ -579,7 +579,7 @@ jobs:
       -
         name: Create Release and Changelog
         id: create-release
-        uses: release-drafter/release-drafter@v6
+        uses: release-drafter/release-drafter@v5
         with:
           name: Paperless-ngx ${{ steps.get_version.outputs.version }}
           tag: ${{ steps.get_version.outputs.version }}
@@ -613,7 +613,7 @@ jobs:
           ref: main
       -
         name: Set up Python
-        uses: actions/setup-python@v5
+        uses: actions/setup-python@v4
         with:
           python-version: ${{ env.DEFAULT_PYTHON_VERSION }}
           cache: "pipenv"
@@ -642,12 +642,12 @@ jobs:
           git push origin ${{ needs.publish-release.outputs.version }}-changelog
       -
         name: Create Pull Request
-        uses: actions/github-script@v7
+        uses: actions/github-script@v6
         with:
           script: |
             const { repo, owner } = context.repo;
             const result = await github.rest.pulls.create({
-              title: 'Documentation: Add ${{ needs.publish-release.outputs.version }} changelog',
+              title: '[Documentation] Add ${{ needs.publish-release.outputs.version }} changelog',
               owner,
               repo,
               head: '${{ needs.publish-release.outputs.version }}-changelog',

.github/workflows/cleanup-tags.yml

@@ -19,13 +19,9 @@ concurrency:
 
 jobs:
   cleanup-images:
-    name: Cleanup Image Tags for ${{ matrix.primary-name }}
+    name: Cleanup Image Tags for paperless-ngx
     if: github.repository_owner == 'paperless-ngx'
     runs-on: ubuntu-22.04
-    strategy:
-      fail-fast: false
-      matrix:
-        primary-name: ["paperless-ngx", "paperless-ngx/builder/cache/app"]
     env:
       # Requires a personal access token with the OAuth scope delete:packages
       TOKEN: ${{ secrets.GHA_CONTAINER_DELETE_TOKEN }}
@@ -33,15 +29,15 @@ jobs:
       -
         name: Clean temporary images
         if: "${{ env.TOKEN != '' }}"
-        uses: stumpylog/image-cleaner-action/ephemeral@v0.8.0
+        uses: stumpylog/image-cleaner-action/ephemeral@v0.3.0
         with:
           token: "${{ env.TOKEN }}"
           owner: "${{ github.repository_owner }}"
           is_org: "true"
-          package_name: "${{ matrix.primary-name }}"
+          package_name: "paperless-ngx"
           scheme: "branch"
           repo_name: "paperless-ngx"
-          match_regex: "(feature|fix)"
+          match_regex: "feature-"
           do_delete: "true"
 
   cleanup-untagged-images:
@@ -53,7 +49,18 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        primary-name: ["paperless-ngx", "paperless-ngx/builder/cache/app"]
+        include:
+          - primary-name: "paperless-ngx"
+          - primary-name: "paperless-ngx/builder/cache/app"
+          # TODO: Remove the above and replace with the below
+          # - primary-name: "builder/qpdf"
+          # - primary-name: "builder/cache/qpdf"
+          # - primary-name: "builder/pikepdf"
+          # - primary-name: "builder/cache/pikepdf"
+          # - primary-name: "builder/jbig2enc"
+          # - primary-name: "builder/cache/jbig2enc"
+          # - primary-name: "builder/psycopg2"
+          # - primary-name: "builder/cache/psycopg2"
     env:
       # Requires a personal access token with the OAuth scope delete:packages
       TOKEN: ${{ secrets.GHA_CONTAINER_DELETE_TOKEN }}
@@ -61,7 +68,7 @@ jobs:
       -
         name: Clean untagged images
         if: "${{ env.TOKEN != '' }}"
-        uses: stumpylog/image-cleaner-action/untagged@v0.8.0
+        uses: stumpylog/image-cleaner-action/untagged@v0.3.0
         with:
           token: "${{ env.TOKEN }}"
           owner: "${{ github.repository_owner }}"

.github/workflows/codeql-analysis.yml

@@ -42,7 +42,7 @@ jobs:
 
     # Initializes the CodeQL tools for scanning.
     - name: Initialize CodeQL
-      uses: github/codeql-action/init@v3
+      uses: github/codeql-action/init@v2
       with:
         languages: ${{ matrix.language }}
         # If you wish to specify custom queries, you can do so here or in a config file.
@@ -51,4 +51,4 @@ jobs:
         # queries: ./path/to/local/query, your-org/your-repo/queries@main
 
     - name: Perform CodeQL Analysis
-      uses: github/codeql-action/analyze@v3
+      uses: github/codeql-action/analyze@v2

.github/workflows/crowdin.yml

@@ -1,34 +0,0 @@
-name: Crowdin Action
-
-on:
-  workflow_dispatch:
-  schedule:
-    - cron: '2 */12 * * *'
-  push:
-    paths: [
-      'src/locale/**',
-      'src-ui/messages.xlf',
-      'src-ui/src/locale/**'
-    ]
-    branches: [ dev ]
-
-jobs:
-  synchronize-with-crowdin:
-    name: Crowdin Sync
-    runs-on: ubuntu-latest
-
-    steps:
-    - name: Checkout
-      uses: actions/checkout@v4
-    - name: crowdin action
-      uses: crowdin/github-action@v2
-      with:
-        upload_translations: false
-        download_translations: true
-        crowdin_branch_name: 'dev'
-        localization_branch_name: l10n_dev
-        pull_request_labels: 'skip-changelog, translation'
-      env:
-        GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-        CROWDIN_PROJECT_ID: ${{ secrets.CROWDIN_PROJECT_ID }}
-        CROWDIN_PERSONAL_TOKEN: ${{ secrets.CROWDIN_PERSONAL_TOKEN }}

.github/workflows/project-actions.yml

@@ -1,6 +1,10 @@
 name: Project Automations
 
 on:
+  issues:
+    types:
+      - opened
+      - reopened
   pull_request_target: #_target allows access to secrets
     types:
       - opened
@@ -12,7 +16,25 @@ on:
 permissions:
   contents: read
 
+env:
+  todo: Todo
+  done: Done
+  in_progress: In Progress
+
 jobs:
+  issue_opened_or_reopened:
+    name: issue_opened_or_reopened
+    runs-on: ubuntu-22.04
+    if: github.event_name == 'issues' && (github.event.action == 'opened' || github.event.action == 'reopened')
+    steps:
+      - name: Add issue to project and set status to ${{ env.todo }}
+        uses: leonsteinhaeuser/project-beta-automations@v2.2.1
+        with:
+          gh_token: ${{ secrets.GH_TOKEN }}
+          organization: paperless-ngx
+          project_id: 2
+          resource_node_id: ${{ github.event.issue.node_id }}
+          status_value: ${{ env.todo }} # Target status
   pr_opened_or_reopened:
     name: pr_opened_or_reopened
     runs-on: ubuntu-22.04
@@ -21,7 +43,15 @@ jobs:
       pull-requests: write
     if: github.event_name == 'pull_request_target' && (github.event.action == 'opened' || github.event.action == 'reopened') && github.event.pull_request.user.login != 'dependabot'
     steps:
+      - name: Add PR to project and set status to "Needs Review"
+        uses: leonsteinhaeuser/project-beta-automations@v2.2.1
+        with:
+          gh_token: ${{ secrets.GH_TOKEN }}
+          organization: paperless-ngx
+          project_id: 2
+          resource_node_id: ${{ github.event.pull_request.node_id }}
+          status_value: "Needs Review" # Target status
       - name: Label PR with release-drafter
-        uses: release-drafter/release-drafter@v6
+        uses: release-drafter/release-drafter@v5
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/repo-maintenance.yml

@@ -18,53 +18,41 @@ jobs:
     name: 'Stale'
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/stale@v9
+      - uses: actions/stale@v8
         with:
           days-before-stale: 7
           days-before-close: 14
-          any-of-labels: 'stale,cant-reproduce,not a bug'
+          any-of-labels: 'cant-reproduce,not a bug'
           stale-issue-label: stale
           stale-pr-label: stale
           stale-issue-message: >
             This issue has been automatically marked as stale because it has not had
             recent activity. It will be closed if no further activity occurs. Thank you
-            for your contributions. See our [contributing guidelines](https://github.com/paperless-ngx/paperless-ngx/blob/dev/CONTRIBUTING.md#automatic-repository-maintenance) for more details.
+            for your contributions.
   lock-threads:
     name: 'Lock Old Threads'
     runs-on: ubuntu-latest
     steps:
-      - uses: dessant/lock-threads@v5
+      - uses: dessant/lock-threads@v4
         with:
           issue-inactive-days: '30'
           pr-inactive-days: '30'
-          discussion-inactive-days: '30'
           log-output: true
           issue-comment: >
             This issue has been automatically locked since there
             has not been any recent activity after it was closed.
             Please open a new discussion or issue for related concerns.
-            See our [contributing guidelines](https://github.com/paperless-ngx/paperless-ngx/blob/dev/CONTRIBUTING.md#automatic-repository-maintenance) for more details.
           pr-comment: >
             This pull request has been automatically locked since there
             has not been any recent activity after it was closed.
             Please open a new discussion or issue for related concerns.
-            See our [contributing guidelines](https://github.com/paperless-ngx/paperless-ngx/blob/dev/CONTRIBUTING.md#automatic-repository-maintenance) for more details.
-          discussion-comment: >
-            This discussion has been automatically locked since there
-            has not been any recent activity after it was closed.
-            Please open a new discussion for related concerns.
-            See our [contributing guidelines](https://github.com/paperless-ngx/paperless-ngx/blob/dev/CONTRIBUTING.md#automatic-repository-maintenance) for more details.
   close-answered-discussions:
     name: 'Close Answered Discussions'
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/github-script@v7
+      - uses: actions/github-script@v6
         with:
           script: |
-            function sleep(ms) {
-              return new Promise(resolve => setTimeout(resolve, ms));
-            }
-
             const query = `query($owner:String!, $name:String!) {
               repository(owner:$owner, name:$name){
                 discussions(first:100, answered:true, states:[OPEN]) {
@@ -84,7 +72,7 @@ jobs:
             console.log(`Found ${result.repository.discussions.nodes.length} open answered discussions`)
 
             for (const discussion of result.repository.discussions.nodes) {
-              console.log(`Closing discussion #${discussion.number} (${discussion.id})`)
+              console.log(`Closing dicussion #${discussion.number} (${discussion.id})`)
 
               const addCommentMutation = `mutation($discussion:ID!, $body:String!) {
                 addDiscussionComment(input:{discussionId:$discussion, body:$body}) {
@@ -93,7 +81,7 @@ jobs:
               }`;
               const commentVariables = {
                 discussion: discussion.id,
-                body: 'This discussion has been automatically closed because it was marked as answered. Please see our [contributing guidelines](https://github.com/paperless-ngx/paperless-ngx/blob/dev/CONTRIBUTING.md#automatic-repository-maintenance) for more details.',
+                body: 'This discussion has been automatically closed because it was marked as answered.',
               }
               await github.graphql(addCommentMutation, commentVariables)
 
@@ -108,174 +96,4 @@ jobs:
               }
               await github.graphql(closeDiscussionMutation, closeVariables)
 
-              await sleep(1000)
-            }
-  close-outdated-discussions:
-    name: 'Close Outdated Discussions'
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/github-script@v7
-        with:
-          script: |
-            function sleep(ms) {
-              return new Promise(resolve => setTimeout(resolve, ms));
-            }
-
-            const CUTOFF_DAYS = 180;
-            const cutoff = new Date();
-            cutoff.setDate(cutoff.getDate() - CUTOFF_DAYS);
-
-            const query = `query(
-                $owner:String!,
-                $name:String!,
-                $supportCategory:ID!,
-                $generalCategory:ID!,
-              ) {
-              supportDiscussions: repository(owner:$owner, name:$name){
-                discussions(
-                  categoryId:$supportCategory,
-                  last:50,
-                  answered:false,
-                  states:[OPEN],
-                ) {
-                  nodes {
-                    id,
-                    number,
-                    updatedAt
-                  }
-                },
-              },
-              generalDiscussions: repository(owner:$owner, name:$name){
-                discussions(
-                  categoryId:$generalCategory,
-                  last:50,
-                  states:[OPEN],
-                ) {
-                  nodes {
-                    id,
-                    number,
-                    updatedAt
-                  }
-                }
-              }
-            }`;
-            const variables = {
-              owner: context.repo.owner,
-              name: context.repo.repo,
-              supportCategory: "DIC_kwDOG1Zs184CBKWK",
-              generalCategory: "DIC_kwDOG1Zs184CBKWJ"
-            }
-            const result = await github.graphql(query, variables);
-            const combinedDiscussions = [
-              ...result.supportDiscussions.discussions.nodes,
-              ...result.generalDiscussions.discussions.nodes,
-            ]
-
-            console.log(`Checking ${combinedDiscussions.length} open discussions`);
-
-            for (const discussion of combinedDiscussions) {
-              if (new Date(discussion.updatedAt) < cutoff) {
-                console.log(`Closing outdated discussion #${discussion.number} (${discussion.id}), last updated at ${discussion.updatedAt}`);
-                const addCommentMutation = `mutation($discussion:ID!, $body:String!) {
-                  addDiscussionComment(input:{discussionId:$discussion, body:$body}) {
-                    clientMutationId
-                  }
-                }`;
-                const commentVariables = {
-                  discussion: discussion.id,
-                  body: 'This discussion has been automatically closed due to inactivity. Please see our [contributing guidelines](https://github.com/paperless-ngx/paperless-ngx/blob/dev/CONTRIBUTING.md#automatic-repository-maintenance) for more details.',
-                }
-                await github.graphql(addCommentMutation, commentVariables);
-
-                const closeDiscussionMutation = `mutation($discussion:ID!, $reason:DiscussionCloseReason!) {
-                  closeDiscussion(input:{discussionId:$discussion, reason:$reason}) {
-                    clientMutationId
-                  }
-                }`;
-                const closeVariables = {
-                  discussion: discussion.id,
-                  reason: "OUTDATED",
-                }
-                await github.graphql(closeDiscussionMutation, closeVariables);
-
-                await sleep(1000);
-              }
-            }
-  close-unsupported-feature-requests:
-    name: 'Close Unsupported Feature Requests'
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/github-script@v7
-        with:
-          script: |
-            function sleep(ms) {
-              return new Promise(resolve => setTimeout(resolve, ms));
-            }
-
-            const CUTOFF_1_DAYS = 180;
-            const CUTOFF_1_COUNT = 5;
-            const CUTOFF_2_DAYS = 365;
-            const CUTOFF_2_COUNT = 10;
-
-            const cutoff1Date = new Date();
-            cutoff1Date.setDate(cutoff1Date.getDate() - CUTOFF_1_DAYS);
-            const cutoff2Date = new Date();
-            cutoff2Date.setDate(cutoff2Date.getDate() - CUTOFF_2_DAYS);
-
-            const query = `query(
-                $owner:String!,
-                $name:String!,
-                $featureRequestsCategory:ID!,
-              ) {
-              repository(owner:$owner, name:$name){
-                discussions(
-                  categoryId:$featureRequestsCategory,
-                  last:100,
-                  states:[OPEN],
-                ) {
-                  nodes {
-                    id,
-                    number,
-                    updatedAt,
-                    upvoteCount,
-                  }
-                },
-              }
-            }`;
-            const variables = {
-              owner: context.repo.owner,
-              name: context.repo.repo,
-              featureRequestsCategory: "DIC_kwDOG1Zs184CBNr4"
-            }
-            const result = await github.graphql(query, variables);
-
-            for (const discussion of result.repository.discussions.nodes) {
-              const discussionDate = new Date(discussion.updatedAt);
-              if ((discussionDate < cutoff1Date && discussion.upvoteCount < CUTOFF_1_COUNT) ||
-                  (discussionDate < cutoff2Date && discussion.upvoteCount < CUTOFF_2_COUNT)) {
-                console.log(`Closing discussion #${discussion.number} (${discussion.id}), last updated at ${discussion.updatedAt} with votes ${discussion.upvoteCount}`);
-                const addCommentMutation = `mutation($discussion:ID!, $body:String!) {
-                  addDiscussionComment(input:{discussionId:$discussion, body:$body}) {
-                    clientMutationId
-                  }
-                }`;
-                const commentVariables = {
-                  discussion: discussion.id,
-                  body: 'This discussion has been automatically closed due to lack of community support. Please see our [contributing guidelines](https://github.com/paperless-ngx/paperless-ngx/blob/dev/CONTRIBUTING.md#automatic-repository-maintenance) for more details.',
-                }
-                await github.graphql(addCommentMutation, commentVariables);
-
-                const closeDiscussionMutation = `mutation($discussion:ID!, $reason:DiscussionCloseReason!) {
-                  closeDiscussion(input:{discussionId:$discussion, reason:$reason}) {
-                    clientMutationId
-                  }
-                }`;
-                const closeVariables = {
-                  discussion: discussion.id,
-                  reason: "OUTDATED",
-                }
-                await github.graphql(closeDiscussionMutation, closeVariables);
-
-                await sleep(1000);
-              }
             }

.gitignore

@@ -22,7 +22,6 @@ var/
 *.egg-info/
 .installed.cfg
 *.egg
-/src/paperless_mail/templates/node_modules
 
 # PyInstaller
 #  Usually these files are written by a python script from a template
@@ -66,8 +65,6 @@ target/
 .vscode
 /src-ui/.vscode
 /docs/.vscode
-.vscode-server
-*CommandMarker
 
 # Other stuff that doesn't belong
 .virtualenv

.pre-commit-config.yaml

@@ -5,14 +5,12 @@
 repos:
   # General hooks
   - repo: https://github.com/pre-commit/pre-commit-hooks
-    rev: v4.6.0
+    rev: v4.5.0
     hooks:
       - id: check-docstring-first
       - id: check-json
         exclude: "tsconfig.*json"
       - id: check-yaml
-        args:
-          - "--unsafe"
       - id: check-toml
       - id: check-executables-have-shebangs
       - id: end-of-file-fixer
@@ -28,14 +26,6 @@ repos:
           - svg
       - id: check-case-conflict
       - id: detect-private-key
-  - repo: https://github.com/codespell-project/codespell
-    rev: v2.3.0
-    hooks:
-      - id: codespell
-        exclude: "(^src-ui/src/locale/)|(^src-ui/e2e/)|(^src/paperless_mail/tests/samples/)"
-        exclude_types:
-          - pofile
-          - json
   - repo: https://github.com/pre-commit/mirrors-prettier
     rev: 'v3.1.0'
     hooks:
@@ -47,10 +37,13 @@ repos:
         exclude: "(^Pipfile\\.lock$)"
   # Python hooks
   - repo: https://github.com/astral-sh/ruff-pre-commit
-    rev: 'v0.6.1'
+    rev: 'v0.1.5'
     hooks:
       - id: ruff
-      - id: ruff-format
+  - repo: https://github.com/psf/black-pre-commit-mirror
+    rev: 23.11.0
+    hooks:
+      - id: black
   # Dockerfile hooks
   - repo: https://github.com/AleksaC/hadolint-py
     rev: v2.12.0.3
@@ -64,6 +57,6 @@ repos:
         args:
           - "--tab"
   - repo: https://github.com/shellcheck-py/shellcheck-py
-    rev: "v0.10.0.1"
+    rev: "v0.9.0.6"
     hooks:
       - id: shellcheck

.prettierrc

@@ -7,7 +7,7 @@
     "trailingComma": "es5",
     "overrides": [
         {
-            "files": ["index.md", "administration.md"],
+            "files": "index.md",
             "options": {
                 "tabWidth": 4
             }

.python-version

@@ -1 +1 @@
-3.9.19
+3.9.18

.ruff.toml

@@ -1,3 +1,8 @@
+# https://beta.ruff.rs/docs/settings/
+# https://beta.ruff.rs/docs/rules/
+extend-select = ["I", "W", "UP", "COM", "DJ", "EXE", "ISC", "ICN", "G201", "INP", "PIE", "RSE", "SIM", "TID", "PLC", "PLE", "RUF"]
+# TODO PTH
+ignore = ["DJ001", "SIM105", "RUF012"]
 fix = true
 line-length = 88
 respect-gitignore = true
@@ -6,42 +11,13 @@ target-version = "py39"
 output-format = "grouped"
 show-fixes = true
 
-# https://docs.astral.sh/ruff/settings/
-# https://docs.astral.sh/ruff/rules/
-[lint]
-extend-select = [
-  "W",     # https://docs.astral.sh/ruff/rules/#pycodestyle-e-w
-  "I",     # https://docs.astral.sh/ruff/rules/#isort-i
-  "UP",    # https://docs.astral.sh/ruff/rules/#pyupgrade-up
-  "COM",   # https://docs.astral.sh/ruff/rules/#flake8-commas-com
-  "DJ",    # https://docs.astral.sh/ruff/rules/#flake8-django-dj
-  "EXE",   # https://docs.astral.sh/ruff/rules/#flake8-executable-exe
-  "ISC",   # https://docs.astral.sh/ruff/rules/#flake8-implicit-str-concat-isc
-  "ICN",   # https://docs.astral.sh/ruff/rules/#flake8-import-conventions-icn
-  "G201",  # https://docs.astral.sh/ruff/rules/#flake8-logging-format-g
-  "INP",   # https://docs.astral.sh/ruff/rules/#flake8-no-pep420-inp
-  "PIE",   # https://docs.astral.sh/ruff/rules/#flake8-pie-pie
-  "Q",     # https://docs.astral.sh/ruff/rules/#flake8-quotes-q
-  "RSE",   # https://docs.astral.sh/ruff/rules/#flake8-raise-rse
-  "T20",   # https://docs.astral.sh/ruff/rules/#flake8-print-t20
-  "SIM",   # https://docs.astral.sh/ruff/rules/#flake8-simplify-sim
-  "TID",   # https://docs.astral.sh/ruff/rules/#flake8-tidy-imports-tid
-  "TCH",   # https://docs.astral.sh/ruff/rules/#flake8-type-checking-tch
-  "PLC",   # https://docs.astral.sh/ruff/rules/#pylint-pl
-  "PLE",   # https://docs.astral.sh/ruff/rules/#pylint-pl
-  "RUF",   # https://docs.astral.sh/ruff/rules/#ruff-specific-rules-ruf
-  "FLY",   # https://docs.astral.sh/ruff/rules/#flynt-fly
-]
-# TODO PTH https://docs.astral.sh/ruff/rules/#flake8-use-pathlib-pth
-ignore = ["DJ001", "SIM105", "RUF012"]
-
-[lint.per-file-ignores]
+[per-file-ignores]
 ".github/scripts/*.py" = ["E501", "INP001", "SIM117"]
-"docker/wait-for-redis.py" = ["INP001", "T201"]
+"docker/wait-for-redis.py" = ["INP001"]
 "*/tests/*.py" = ["E501", "SIM117"]
-"*/migrations/*.py" = ["E501", "SIM", "T201"]
+"*/migrations/*.py" = ["E501", "SIM"]
 "src/paperless_tesseract/tests/test_parser.py" = ["RUF001"]
 "src/documents/models.py" = ["SIM115"]
 
-[lint.isort]
+[isort]
 force-single-line = true

CODE_OF_CONDUCT.md

@@ -5,7 +5,7 @@
 We as members, contributors, and leaders pledge to make participation in our
 community a harassment-free experience for everyone, regardless of age, body
 size, visible or invisible disability, ethnicity, sex characteristics, gender
-identity and expression, level of experience, education, socioeconomic status,
+identity and expression, level of experience, education, socio-economic status,
 nationality, personal appearance, race, religion, or sexual identity
 and orientation.
 

CONTRIBUTING.md

@@ -11,7 +11,7 @@ If you want to implement something big:
 
 ## Python
 
-Paperless supports python 3.9 - 3.11 at this time. We format Python code with [ruff](https://docs.astral.sh/ruff/formatter/).
+Paperless supports python 3.9 - 3.11. We format Python code with [Black](https://github.com/psf/black).
 
 ## Branches
 
@@ -94,7 +94,7 @@ The following files need to be changed:
 
 - src-ui/angular.json (under the _projects/paperless-ui/i18n/locales_ JSON key)
 - src/paperless/settings.py (in the _LANGUAGES_ array)
-- src-ui/src/app/services/settings.service.ts (inside the _LANGUAGE_OPTIONS_ array)
+- src-ui/src/app/services/settings.service.ts (inside the _getLanguageOptions_ method)
 - src-ui/src/app/app.module.ts (import locale from _angular/common/locales_ and call _registerLocaleData_)
 
 Please add the language in the correct order, alphabetically by locale.
@@ -137,19 +137,3 @@ All team members are notified when mentioned or assigned to a relevant issue or
 We are not overly strict with inviting people to the organization. If you have read the [team permissions](#permissions) and think having additional access would enhance your contributions, please reach out to an [admin](#structure) of the team.
 
 The admins occasionally invite contributors directly if we believe having them on a team will accelerate their work.
-
-# Automatic Repository Maintenance
-
-The Paperless-ngx team appreciates all effort and interest from the community in filing bug reports, creating feature requests, sharing ideas and helping other
-community members. That said, in an effort to keep the repository organized and managebale the project uses automatic handling of certain areas:
-
-- Issues that cannot be reproduced will be marked 'stale' after 7 days of inactivity and closed after 14 further days of inactivity.
-- Issues, pull requests and discussions that are closed will be locked after 30 days of inactivity.
-- Discussions with a marked answer will be automatically closed.
-- Discussions in the 'General' or 'Support' categories will be closed after 180 days of inactivity.
-- Feature requests that do not meet the following thresholds will be closed: 5 "up-votes" after 180 days of inactivity or 10 "up-votes" after 365 days.
-
-In all cases, threads can be re-opened by project maintainers and, of course, users can always create a new discussion for related concerns.
-Finally, remember that all information remains searchable and 'closed' feature requests can still serve as inspiration for new features.
-
-Thank you all for your contributions.

Dockerfile

@@ -12,17 +12,7 @@ COPY ./src-ui /src/src-ui
 WORKDIR /src/src-ui
 RUN set -eux \
   && npm update npm -g \
-  && npm ci
-
-ARG PNGX_TAG_VERSION=
-# Add the tag to the environment file if its a tagged dev build
-RUN set -eux && \
-case "${PNGX_TAG_VERSION}" in \
-  dev|fix*|feature*) \
-    sed -i -E "s/version: '([0-9\.]+)'/version: '\1 #${PNGX_TAG_VERSION}'/g" /src/src-ui/src/environments/environment.prod.ts \
-    ;; \
-esac
-
+  && npm ci --omit=optional
 RUN set -eux \
   && ./node_modules/.bin/ng build --configuration production
 
@@ -31,7 +21,7 @@ RUN set -eux \
 # Comments:
 #  - pipenv dependencies are not left in the final image
 #  - pipenv can't touch the final image somehow
-FROM --platform=$BUILDPLATFORM docker.io/python:3.11-alpine AS pipenv-base
+FROM --platform=$BUILDPLATFORM docker.io/python:3.11-alpine as pipenv-base
 
 WORKDIR /usr/src/pipenv
 
@@ -39,7 +29,7 @@ COPY Pipfile* ./
 
 RUN set -eux \
   && echo "Installing pipenv" \
-    && python3 -m pip install --no-cache-dir --upgrade pipenv==2024.0.1 \
+    && python3 -m pip install --no-cache-dir --upgrade pipenv==2023.10.24 \
   && echo "Generating requirement.txt" \
     && pipenv requirements > requirements.txt
 
@@ -47,7 +37,7 @@ RUN set -eux \
 # Purpose: The final image
 # Comments:
 #  - Don't leave anything extra in here
-FROM docker.io/python:3.11-slim-bookworm AS main-app
+FROM docker.io/python:3.11-slim-bookworm as main-app
 
 LABEL org.opencontainers.image.authors="paperless-ngx team <hello@paperless-ngx.com>"
 LABEL org.opencontainers.image.documentation="https://docs.paperless-ngx.com/"
@@ -62,15 +52,8 @@ ARG TARGETARCH
 
 # Can be workflow provided, defaults set for manual building
 ARG JBIG2ENC_VERSION=0.29
-ARG QPDF_VERSION=11.9.0
-ARG GS_VERSION=10.03.1
-
-# Set Python environment variables
-ENV PYTHONDONTWRITEBYTECODE=1 \
-    PYTHONUNBUFFERED=1 \
-    # Ignore warning from Whitenoise
-    PYTHONWARNINGS="ignore:::django.http.response:517" \
-    PNGX_CONTAINERIZED=1
+ARG QPDF_VERSION=11.6.3
+ARG GS_VERSION=10.02.0
 
 #
 # Begin installation and configuration
@@ -93,6 +76,7 @@ ARG RUNTIME_PACKAGES="\
   icc-profiles-free \
   imagemagick \
   # PostgreSQL
+  libpq5 \
   postgresql-client \
   # MySQL / MariaDB
   mariadb-client \
@@ -138,17 +122,17 @@ RUN set -eux \
         && dpkg --install ./qpdf_${QPDF_VERSION}-1_${TARGETARCH}.deb \
       && echo "Installing Ghostscript ${GS_VERSION}" \
         && curl --fail --silent --show-error --location \
-          --output libgs10_${GS_VERSION}.dfsg-1_${TARGETARCH}.deb \
-          https://github.com/paperless-ngx/builder/releases/download/ghostscript-${GS_VERSION}/libgs10_${GS_VERSION}.dfsg-1_${TARGETARCH}.deb \
+          --output libgs10_${GS_VERSION}.dfsg-2_${TARGETARCH}.deb \
+          https://github.com/paperless-ngx/builder/releases/download/ghostscript-${GS_VERSION}/libgs10_${GS_VERSION}.dfsg-2_${TARGETARCH}.deb \
         && curl --fail --silent --show-error --location \
-          --output ghostscript_${GS_VERSION}.dfsg-1_${TARGETARCH}.deb \
-          https://github.com/paperless-ngx/builder/releases/download/ghostscript-${GS_VERSION}/ghostscript_${GS_VERSION}.dfsg-1_${TARGETARCH}.deb \
+          --output ghostscript_${GS_VERSION}.dfsg-2_${TARGETARCH}.deb \
+          https://github.com/paperless-ngx/builder/releases/download/ghostscript-${GS_VERSION}/ghostscript_${GS_VERSION}.dfsg-2_${TARGETARCH}.deb \
         && curl --fail --silent --show-error --location \
-          --output libgs10-common_${GS_VERSION}.dfsg-1_all.deb \
-          https://github.com/paperless-ngx/builder/releases/download/ghostscript-${GS_VERSION}/libgs10-common_${GS_VERSION}.dfsg-1_all.deb \
-        && dpkg --install ./libgs10-common_${GS_VERSION}.dfsg-1_all.deb \
-        && dpkg --install ./libgs10_${GS_VERSION}.dfsg-1_${TARGETARCH}.deb \
-        && dpkg --install ./ghostscript_${GS_VERSION}.dfsg-1_${TARGETARCH}.deb \
+          --output libgs10-common_${GS_VERSION}.dfsg-2_all.deb \
+          https://github.com/paperless-ngx/builder/releases/download/ghostscript-${GS_VERSION}/libgs10-common_${GS_VERSION}.dfsg-2_all.deb \
+        && dpkg --install ./libgs10-common_${GS_VERSION}.dfsg-2_all.deb \
+        && dpkg --install ./libgs10_${GS_VERSION}.dfsg-2_${TARGETARCH}.deb \
+        && dpkg --install ./ghostscript_${GS_VERSION}.dfsg-2_${TARGETARCH}.deb \
       && echo "Installing jbig2enc" \
         && curl --fail --silent --show-error --location \
           --output jbig2enc_${JBIG2ENC_VERSION}-1_${TARGETARCH}.deb \
@@ -203,7 +187,7 @@ RUN set -eux \
     && chmod 755 /usr/local/bin/paperless_cmd.sh \
     && mv flower-conditional.sh /usr/local/bin/flower-conditional.sh \
     && chmod 755 /usr/local/bin/flower-conditional.sh \
-  && echo "Installing management commands" \
+  && echo "Installing managment commands" \
     && chmod +x install_management_commands.sh \
     && ./install_management_commands.sh
 
@@ -232,13 +216,7 @@ RUN --mount=type=cache,target=/root/.cache/pip/,id=pip-cache \
     && apt-get install --yes --quiet --no-install-recommends ${BUILD_PACKAGES} \
     && python3 -m pip install --no-cache-dir --upgrade wheel \
   && echo "Installing Python requirements" \
-    && curl --fail --silent --show-error --location \
-    --output psycopg_c-3.2.1-cp311-cp311-linux_x86_64.whl \
-    https://github.com/paperless-ngx/builder/releases/download/psycopg-3.2.1/psycopg_c-3.2.1-cp311-cp311-linux_x86_64.whl \
-    && curl --fail --silent --show-error --location \
-    --output psycopg_c-3.2.1-cp311-cp311-linux_aarch64.whl  \
-    https://github.com/paperless-ngx/builder/releases/download/psycopg-3.2.1/psycopg_c-3.2.1-cp311-cp311-linux_aarch64.whl \
-    && python3 -m pip install --default-timeout=1000 --find-links . --requirement requirements.txt \
+    && python3 -m pip install --default-timeout=1000 --requirement requirements.txt \
   && echo "Patching whitenoise for compression speedup" \
     && curl --fail --silent --show-error --location --output 484.patch https://github.com/evansd/whitenoise/pull/484.patch \
     && patch -d /usr/local/lib/python3.11/site-packages --verbose -p2 < 484.patch \
@@ -251,7 +229,6 @@ RUN --mount=type=cache,target=/root/.cache/pip/,id=pip-cache \
     && apt-get --yes purge ${BUILD_PACKAGES} \
     && apt-get --yes autoremove --purge \
     && apt-get clean --yes \
-    && rm --recursive --force --verbose *.whl \
     && rm --recursive --force --verbose /var/lib/apt/lists/* \
     && rm --recursive --force --verbose /tmp/* \
     && rm --recursive --force --verbose /var/tmp/* \
@@ -291,5 +268,3 @@ ENTRYPOINT ["/sbin/docker-entrypoint.sh"]
 EXPOSE 8000
 
 CMD ["/usr/local/bin/paperless_cmd.sh"]
-
-HEALTHCHECK --interval=30s --timeout=10s --retries=5 CMD [ "curl", "-fs", "-S", "--max-time", "2", "http://localhost:8000" ]

Pipfile

@@ -4,26 +4,24 @@ verify_ssl = true
 name = "pypi"
 
 [packages]
-dateparser = "~=1.2"
+dateparser = "~=1.1"
 # WARNING: django does not use semver.
 #          Only patch versions are guaranteed to not introduce breaking changes.
-django = "~=4.2.15"
-django-allauth = {extras = ["socialaccount"], version = "*"}
+django = "~=4.2.7"
 django-auditlog = "*"
 django-celery-results = "*"
 django-compression-middleware = "*"
 django-cors-headers = "*"
 django-extensions = "*"
-django-filter = "~=24.3"
+django-filter = "~=23.3"
 django-guardian = "*"
 django-multiselectfield = "*"
-django-soft-delete = "*"
-djangorestframework = "==3.15.2"
+djangorestframework = "~=3.14"
 djangorestframework-guardian = "*"
 drf-writable-nested = "*"
 bleach = "*"
-celery = {extras = ["redis"], version = "*"}
-channels = "~=4.1"
+celery = "*"
+channels = "~=4.0"
 channels-redis = "*"
 concurrent-log-handler = "*"
 filelock = "*"
@@ -35,10 +33,10 @@ inotifyrecursive = "~=0.3"
 langdetect = "*"
 mysqlclient = "*"
 nltk = "*"
-ocrmypdf = "~=15.4"
+ocrmypdf = "~=15.0"
 pathvalidate = "*"
 pdf2image = "*"
-psycopg = {version = "*", extras = ["c"]}
+psycopg2 = "*"
 python-dateutil = "*"
 python-dotenv = "*"
 python-gnupg = "*"
@@ -47,19 +45,19 @@ python-magic = "*"
 pyzbar = "*"
 rapidfuzz = "*"
 redis = {extras = ["hiredis"], version = "*"}
-scikit-learn = "~=1.5"
+scikit-learn = "~=1.3"
 setproctitle = "*"
 tika-client = "*"
 tqdm = "*"
-# See https://github.com/paperless-ngx/paperless-ngx/issues/5494
-uvicorn = {extras = ["standard"], version = "==0.25.0"}
-watchdog = "~=4.0"
-whitenoise = "~=6.7"
-whoosh = "~=2.7"
+uvicorn = {extras = ["standard"], version = "*"}
+watchdog = "~=3.0"
+whitenoise = "~=6.6"
+whoosh="~=2.7"
 zxing-cpp = {version = "*", platform_machine = "== 'x86_64'"}
 
 [dev-packages]
 # Linting
+black = "*"
 pre-commit = "*"
 ruff = "*"
 # Testing
@@ -71,7 +69,6 @@ pytest-httpx = "*"
 pytest-env = "*"
 pytest-sugar = "*"
 pytest-xdist = "*"
-pytest-mock = "*"
 pytest-rerunfailures = "*"
 imagehash = "*"
 daphne = "*"
@@ -94,4 +91,5 @@ types-tqdm = "*"
 types-Markdown = "*"
 types-Pygments = "*"
 types-colorama = "*"
+types-psycopg2 = "*"
 types-setuptools = "*"

README.md

@@ -6,11 +6,8 @@
 [![demo](https://cronitor.io/badges/ve7ItY/production/W5E_B9jkelG9ZbDiNHUPQEVH3MY.svg)](https://demo.paperless-ngx.com)
 
 <p align="center">
-  <picture>
-    <source media="(prefers-color-scheme: dark)" srcset="https://github.com/paperless-ngx/paperless-ngx/blob/main/resources/logo/web/png/White%20logo%20-%20no%20background.png" width="50%">
-    <source media="(prefers-color-scheme: light)" srcset="https://github.com/paperless-ngx/paperless-ngx/raw/main/resources/logo/web/png/Black%20logo%20-%20no%20background.png" width="50%">
-    <img src="https://github.com/paperless-ngx/paperless-ngx/raw/main/resources/logo/web/png/Black%20logo%20-%20no%20background.png" width="50%">
-  </picture>
+<img src="https://github.com/paperless-ngx/paperless-ngx/raw/main/resources/logo/web/png/Black%20logo%20-%20no%20background.png#gh-light-mode-only" width="50%" />
+<img src="https://github.com/paperless-ngx/paperless-ngx/raw/main/resources/logo/web/png/White%20logo%20-%20no%20background.png#gh-dark-mode-only" width="50%" />
 </p>
 
 <!-- omit in toc -->
@@ -21,7 +18,7 @@ Paperless-ngx is a document management system that transforms your physical docu
 
 Paperless-ngx is the official successor to the original [Paperless](https://github.com/the-paperless-project/paperless) & [Paperless-ng](https://github.com/jonaswinkler/paperless-ng) projects and is designed to distribute the responsibility of advancing and supporting the project among a team of people. [Consider joining us!](#community-support)
 
-Thanks to the generous folks at [DigitalOcean](https://m.do.co/c/8d70b916d462), a demo is available at [demo.paperless-ngx.com](https://demo.paperless-ngx.com) using login `demo` / `demo`. _Note: demo content is reset frequently and confidential information should not be uploaded._
+A demo is available at [demo.paperless-ngx.com](https://demo.paperless-ngx.com) using login `demo` / `demo`. _Note: demo content is reset frequently and confidential information should not be uploaded._
 
 - [Features](#features)
 - [Getting started](#getting-started)
@@ -30,40 +27,27 @@ Thanks to the generous folks at [DigitalOcean](https://m.do.co/c/8d70b916d462),
   - [Translation](#translation)
   - [Feature Requests](#feature-requests)
   - [Bugs](#bugs)
-- [Related Projects](#related-projects)
+- [Affiliated Projects](#affiliated-projects)
 - [Important Note](#important-note)
 
-<p align="right">This project is supported by:<br/>
-  <a href="https://m.do.co/c/8d70b916d462" style="padding-top: 4px; display: block;">
-    <picture>
-      <source media="(prefers-color-scheme: dark)" srcset="https://opensource.nyc3.cdn.digitaloceanspaces.com/attribution/assets/SVG/DO_Logo_horizontal_white.svg" width="140px">
-      <source media="(prefers-color-scheme: light)" srcset="https://opensource.nyc3.cdn.digitaloceanspaces.com/attribution/assets/SVG/DO_Logo_horizontal_blue.svg" width="140px">
-      <img src="https://opensource.nyc3.cdn.digitaloceanspaces.com/attribution/assets/SVG/DO_Logo_horizontal_black_.svg" width="140px">
-    </picture>
-  </a>
-</p>
-
 # Features
 
-<picture>
-  <source media="(prefers-color-scheme: dark)" srcset="https://raw.githubusercontent.com/paperless-ngx/paperless-ngx/main/docs/assets/screenshots/documents-smallcards-dark.png">
-  <source media="(prefers-color-scheme: light)" srcset="https://raw.githubusercontent.com/paperless-ngx/paperless-ngx/main/docs/assets/screenshots/documents-smallcards.png">
-  <img src="https://raw.githubusercontent.com/paperless-ngx/paperless-ngx/main/docs/assets/screenshots/documents-smallcards.png">
-</picture>
+![Dashboard](https://raw.githubusercontent.com/paperless-ngx/paperless-ngx/main/docs/assets/screenshots/documents-smallcards.png#gh-light-mode-only)
+![Dashboard](https://raw.githubusercontent.com/paperless-ngx/paperless-ngx/main/docs/assets/screenshots/documents-smallcards-dark.png#gh-dark-mode-only)
 
 A full list of [features](https://docs.paperless-ngx.com/#features) and [screenshots](https://docs.paperless-ngx.com/#screenshots) are available in the [documentation](https://docs.paperless-ngx.com/).
 
 # Getting started
 
-The easiest way to deploy paperless is `docker compose`. The files in the [`/docker/compose` directory](https://github.com/paperless-ngx/paperless-ngx/tree/main/docker/compose) are configured to pull the image from GitHub Packages.
+The easiest way to deploy paperless is docker-compose. The files in the [`/docker/compose` directory](https://github.com/paperless-ngx/paperless-ngx/tree/main/docker/compose) are configured to pull the image from GitHub Packages.
 
-If you'd like to jump right in, you can configure a `docker compose` environment with our install script:
+If you'd like to jump right in, you can configure a docker-compose environment with our install script:
 
 ```bash
 bash -c "$(curl -L https://raw.githubusercontent.com/paperless-ngx/paperless-ngx/main/install-paperless-ngx.sh)"
 ```
 
-More details and step-by-step guides for alternative installation methods can be found in [the documentation](https://docs.paperless-ngx.com/setup/#installation).
+Alternatively, you can install the dependencies and setup apache and a database server yourself. The [documentation](https://docs.paperless-ngx.com/setup/#installation) has a step by step guide on how to do it.
 
 Migrating from Paperless-ng is easy, just drop in the new docker image! See the [documentation on migrating](https://docs.paperless-ngx.com/setup/#migrating-to-paperless-ngx) for more details.
 
@@ -93,9 +77,9 @@ Feature requests can be submitted via [GitHub Discussions](https://github.com/pa
 
 For bugs please [open an issue](https://github.com/paperless-ngx/paperless-ngx/issues) or [start a discussion](https://github.com/paperless-ngx/paperless-ngx/discussions) if you have questions.
 
-# Related Projects
+# Affiliated Projects
 
-Please see [the wiki](https://github.com/paperless-ngx/paperless-ngx/wiki/Related-Projects) for a user-maintained list of related projects and software that is compatible with Paperless-ngx.
+Please see [the wiki](https://github.com/paperless-ngx/paperless-ngx/wiki/Affiliated-Projects) for a user-maintained list of affiliated projects and software that is compatible with Paperless-ngx.
 
 # Important Note
 

SECURITY.md

@@ -1,9 +0,0 @@
-# Security Policy
-
-## Reporting a Vulnerability
-
-The Paperless-ngx team and community take security bugs seriously. We appreciate your efforts to responsibly disclose your findings, and will make every effort to acknowledge your contributions.
-
-To report a security issue, please use the GitHub Security Advisory ["Report a Vulnerability"](https://github.com/paperless-ngx/paperless-ngx/security/advisories/new) tab.
-
-The team will send a response indicating the next steps in handling your report. After the initial reply to your report, the security team will keep you informed of the progress towards a fix and full announcement, and may ask for additional information or guidance.

crowdin.yml

@@ -1,6 +1,8 @@
-project_id_env: CROWDIN_PROJECT_ID
-api_token_env: CROWDIN_PERSONAL_TOKEN
-preserve_hierarchy: true
+commit_message: '[ci skip]'
+pull_request_labels: [
+  "skip-changelog",
+  "translation"
+]
 files:
   - source: /src/locale/en_US/LC_MESSAGES/django.po
     translation: /src/locale/%locale_with_underscore%/LC_MESSAGES/django.po

docker/compose/docker-compose.ci-test.yml

@@ -1,11 +1,12 @@
-# Docker Compose file for running paperless testing with actual gotenberg
+# docker-compose file for running paperless testing with actual gotenberg
 # and Tika containers for a more end to end test of the Tika related functionality
-# Can be used locally or by the CI to start the necessary containers with the
+# Can be used locally or by the CI to start the nessecary containers with the
 # correct networking for the tests
 
+version: "3.7"
 services:
   gotenberg:
-    image: docker.io/gotenberg/gotenberg:8.7
+    image: docker.io/gotenberg/gotenberg:7.8
     hostname: gotenberg
     container_name: gotenberg
     network_mode: host
@@ -16,10 +17,8 @@ services:
       - "gotenberg"
       - "--chromium-disable-javascript=true"
       - "--chromium-allow-list=file:///tmp/.*"
-      - "--log-level=warn"
-      - "--log-format=text"
   tika:
-    image: docker.io/apache/tika:latest
+    image: ghcr.io/paperless-ngx/tika:latest
     hostname: tika
     container_name: tika
     network_mode: host

docker/compose/docker-compose.mariadb-tika.yml

@@ -1,4 +1,4 @@
-# docker compose file for running paperless from the Docker Hub.
+# docker-compose file for running paperless from the Docker Hub.
 # This file contains everything paperless needs to run.
 # Paperless supports amd64, arm and arm64 hardware.
 #
@@ -10,7 +10,7 @@
 #   as this file and mounted to the correct folders inside the container.
 # - Paperless listens on port 8000.
 #
-# In addition to that, this Docker Compose file adds the following optional
+# In addition to that, this docker-compose file adds the following optional
 # configurations:
 #
 # - Instead of SQLite (default), MariaDB is used as the database server.
@@ -23,13 +23,14 @@
 #
 # - Copy this file as 'docker-compose.yml' and the files 'docker-compose.env'
 #   and '.env' into a folder.
-# - Run 'docker compose pull'.
-# - Run 'docker compose run --rm webserver createsuperuser' to create a user.
-# - Run 'docker compose up -d'.
+# - Run 'docker-compose pull'.
+# - Run 'docker-compose run --rm webserver createsuperuser' to create a user.
+# - Run 'docker-compose up -d'.
 #
 # For more extensive installation and update instructions, refer to the
 # documentation.
 
+version: "3.4"
 services:
   broker:
     image: docker.io/library/redis:7
@@ -38,7 +39,7 @@ services:
       - redisdata:/data
 
   db:
-    image: docker.io/library/mariadb:11
+    image: docker.io/library/mariadb:10
     restart: unless-stopped
     volumes:
       - dbdata:/var/lib/mysql
@@ -59,6 +60,11 @@ services:
       - tika
     ports:
       - "8000:8000"
+    healthcheck:
+      test: ["CMD", "curl", "-f", "http://localhost:8000"]
+      interval: 30s
+      timeout: 10s
+      retries: 5
     volumes:
       - data:/usr/src/paperless/data
       - media:/usr/src/paperless/media
@@ -77,7 +83,7 @@ services:
       PAPERLESS_TIKA_ENDPOINT: http://tika:9998
 
   gotenberg:
-    image: docker.io/gotenberg/gotenberg:8.7
+    image: docker.io/gotenberg/gotenberg:7.8
     restart: unless-stopped
     # The gotenberg chromium route is used to convert .eml files. We do not
     # want to allow external content like tracking pixels or even javascript.
@@ -87,7 +93,7 @@ services:
       - "--chromium-allow-list=file:///tmp/.*"
 
   tika:
-    image: docker.io/apache/tika:latest
+    image: ghcr.io/paperless-ngx/tika:latest
     restart: unless-stopped
 
 volumes:

docker/compose/docker-compose.mariadb.yml

@@ -1,4 +1,4 @@
-# Docker Compose file for running paperless from the Docker Hub.
+# docker-compose file for running paperless from the Docker Hub.
 # This file contains everything paperless needs to run.
 # Paperless supports amd64, arm and arm64 hardware.
 #
@@ -10,7 +10,7 @@
 #   as this file and mounted to the correct folders inside the container.
 # - Paperless listens on port 8000.
 #
-# In addition to that, this Docker Compose file adds the following optional
+# In addition to that, this docker-compose file adds the following optional
 # configurations:
 #
 # - Instead of SQLite (default), MariaDB is used as the database server.
@@ -19,13 +19,14 @@
 #
 # - Copy this file as 'docker-compose.yml' and the files 'docker-compose.env'
 #   and '.env' into a folder.
-# - Run 'docker compose pull'.
-# - Run 'docker compose run --rm webserver createsuperuser' to create a user.
-# - Run 'docker compose up -d'.
+# - Run 'docker-compose pull'.
+# - Run 'docker-compose run --rm webserver createsuperuser' to create a user.
+# - Run 'docker-compose up -d'.
 #
 # For more extensive installation and update instructions, refer to the
 # documentation.
 
+version: "3.4"
 services:
   broker:
     image: docker.io/library/redis:7
@@ -34,7 +35,7 @@ services:
       - redisdata:/data
 
   db:
-    image: docker.io/library/mariadb:11
+    image: docker.io/library/mariadb:10
     restart: unless-stopped
     volumes:
       - dbdata:/var/lib/mysql
@@ -53,6 +54,11 @@ services:
       - broker
     ports:
       - "8000:8000"
+    healthcheck:
+      test: ["CMD", "curl", "-f", "http://localhost:8000"]
+      interval: 30s
+      timeout: 10s
+      retries: 5
     volumes:
       - data:/usr/src/paperless/data
       - media:/usr/src/paperless/media
@@ -67,6 +73,7 @@ services:
       PAPERLESS_DBPASS: paperless # only needed if non-default password
       PAPERLESS_DBPORT: 3306
 
+
 volumes:
   data:
   media:

docker/compose/docker-compose.portainer.yml

@@ -1,4 +1,4 @@
-# Docker Compose file for running paperless from the Docker Hub.
+# docker-compose file for running paperless from the Docker Hub.
 # This file contains everything paperless needs to run.
 # Paperless supports amd64, arm and arm64 hardware.
 #
@@ -10,7 +10,7 @@
 #   as this file and mounted to the correct folders inside the container.
 # - Paperless listens on port 8010.
 #
-# In addition to that, this Docker Compose file adds the following optional
+# In addition to that, this docker-compose file adds the following optional
 # configurations:
 #
 # - Instead of SQLite (default), PostgreSQL is used as the database server.
@@ -18,7 +18,7 @@
 # To install and update paperless with this file, do the following:
 #
 # - Open portainer Stacks list and click 'Add stack'
-# - Paste the contents of this file and assign a name, e.g. 'paperless'
+# - Paste the contents of this file and assign a name, e.g. 'Paperless'
 # - Click 'Deploy the stack' and wait for it to be deployed
 # - Open the list of containers, select paperless_webserver_1
 # - Click 'Console' and then 'Connect' to open the command line inside the container
@@ -28,6 +28,7 @@
 # For more extensive installation and update instructions, refer to the
 # documentation.
 
+version: "3.4"
 services:
   broker:
     image: docker.io/library/redis:7
@@ -36,7 +37,7 @@ services:
       - redisdata:/data
 
   db:
-    image: docker.io/library/postgres:16
+    image: docker.io/library/postgres:15
     restart: unless-stopped
     volumes:
       - pgdata:/var/lib/postgresql/data
@@ -53,6 +54,11 @@ services:
       - broker
     ports:
       - "8010:8000"
+    healthcheck:
+      test: ["CMD", "curl", "-fs", "-S", "--max-time", "2", "http://localhost:8000"]
+      interval: 30s
+      timeout: 10s
+      retries: 5
     volumes:
       - data:/usr/src/paperless/data
       - media:/usr/src/paperless/media

docker/compose/docker-compose.postgres-tika.yml

@@ -1,4 +1,4 @@
-# Docker Compose file for running paperless from the docker container registry.
+# docker-compose file for running paperless from the docker container registry.
 # This file contains everything paperless needs to run.
 # Paperless supports amd64, arm and arm64 hardware.
 #
@@ -10,7 +10,7 @@
 #   as this file and mounted to the correct folders inside the container.
 # - Paperless listens on port 8000.
 #
-# In addition to that, this Docker Compose file adds the following optional
+# In addition to that, this docker-compose file adds the following optional
 # configurations:
 #
 # - Instead of SQLite (default), PostgreSQL is used as the database server.
@@ -23,13 +23,14 @@
 #
 # - Copy this file as 'docker-compose.yml' and the files 'docker-compose.env'
 #   and '.env' into a folder.
-# - Run 'docker compose pull'.
-# - Run 'docker compose run --rm webserver createsuperuser' to create a user.
-# - Run 'docker compose up -d'.
+# - Run 'docker-compose pull'.
+# - Run 'docker-compose run --rm webserver createsuperuser' to create a user.
+# - Run 'docker-compose up -d'.
 #
 # For more extensive installation and update instructions, refer to the
 # documentation.
 
+version: "3.4"
 services:
   broker:
     image: docker.io/library/redis:7
@@ -38,7 +39,7 @@ services:
       - redisdata:/data
 
   db:
-    image: docker.io/library/postgres:16
+    image: docker.io/library/postgres:15
     restart: unless-stopped
     volumes:
       - pgdata:/var/lib/postgresql/data
@@ -57,6 +58,11 @@ services:
       - tika
     ports:
       - "8000:8000"
+    healthcheck:
+      test: ["CMD", "curl", "-fs", "-S", "--max-time", "2", "http://localhost:8000"]
+      interval: 30s
+      timeout: 10s
+      retries: 5
     volumes:
       - data:/usr/src/paperless/data
       - media:/usr/src/paperless/media
@@ -71,7 +77,7 @@ services:
       PAPERLESS_TIKA_ENDPOINT: http://tika:9998
 
   gotenberg:
-    image: docker.io/gotenberg/gotenberg:8.7
+    image: docker.io/gotenberg/gotenberg:7.8
     restart: unless-stopped
 
     # The gotenberg chromium route is used to convert .eml files. We do not
@@ -82,7 +88,7 @@ services:
       - "--chromium-allow-list=file:///tmp/.*"
 
   tika:
-    image: docker.io/apache/tika:latest
+    image: ghcr.io/paperless-ngx/tika:latest
     restart: unless-stopped
 
 volumes:

docker/compose/docker-compose.postgres.yml

@@ -1,4 +1,4 @@
-# Docker Compose file for running paperless from the Docker Hub.
+# docker-compose file for running paperless from the Docker Hub.
 # This file contains everything paperless needs to run.
 # Paperless supports amd64, arm and arm64 hardware.
 #
@@ -10,7 +10,7 @@
 #   as this file and mounted to the correct folders inside the container.
 # - Paperless listens on port 8000.
 #
-# In addition to that, this Docker Compose file adds the following optional
+# In addition to that, this docker-compose file adds the following optional
 # configurations:
 #
 # - Instead of SQLite (default), PostgreSQL is used as the database server.
@@ -19,13 +19,14 @@
 #
 # - Copy this file as 'docker-compose.yml' and the files 'docker-compose.env'
 #   and '.env' into a folder.
-# - Run 'docker compose pull'.
-# - Run 'docker compose run --rm webserver createsuperuser' to create a user.
-# - Run 'docker compose up -d'.
+# - Run 'docker-compose pull'.
+# - Run 'docker-compose run --rm webserver createsuperuser' to create a user.
+# - Run 'docker-compose up -d'.
 #
 # For more extensive installation and update instructions, refer to the
 # documentation.
 
+version: "3.4"
 services:
   broker:
     image: docker.io/library/redis:7
@@ -34,7 +35,7 @@ services:
       - redisdata:/data
 
   db:
-    image: docker.io/library/postgres:16
+    image: docker.io/library/postgres:15
     restart: unless-stopped
     volumes:
       - pgdata:/var/lib/postgresql/data
@@ -51,6 +52,11 @@ services:
       - broker
     ports:
       - "8000:8000"
+    healthcheck:
+      test: ["CMD", "curl", "-fs", "-S", "--max-time", "2", "http://localhost:8000"]
+      interval: 30s
+      timeout: 10s
+      retries: 5
     volumes:
       - data:/usr/src/paperless/data
       - media:/usr/src/paperless/media
@@ -61,6 +67,7 @@ services:
       PAPERLESS_REDIS: redis://broker:6379
       PAPERLESS_DBHOST: db
 
+
 volumes:
   data:
   media:

docker/compose/docker-compose.sqlite-tika.yml

@@ -1,4 +1,4 @@
-# Docker Compose file for running paperless from the docker container registry.
+# docker-compose file for running paperless from the docker container registry.
 # This file contains everything paperless needs to run.
 # Paperless supports amd64, arm and arm64 hardware.
 # All compose files of paperless configure paperless in the following way:
@@ -11,7 +11,7 @@
 #
 # SQLite is used as the database. The SQLite file is stored in the data volume.
 #
-# In addition to that, this Docker Compose file adds the following optional
+# In addition to that, this docker-compose file adds the following optional
 # configurations:
 #
 # - Apache Tika and Gotenberg servers are started with paperless and paperless
@@ -23,13 +23,14 @@
 #
 # - Copy this file as 'docker-compose.yml' and the files 'docker-compose.env'
 #   and '.env' into a folder.
-# - Run 'docker compose pull'.
-# - Run 'docker compose run --rm webserver createsuperuser' to create a user.
-# - Run 'docker compose up -d'.
+# - Run 'docker-compose pull'.
+# - Run 'docker-compose run --rm webserver createsuperuser' to create a user.
+# - Run 'docker-compose up -d'.
 #
 # For more extensive installation and update instructions, refer to the
 # documentation.
 
+version: "3.4"
 services:
   broker:
     image: docker.io/library/redis:7
@@ -46,6 +47,11 @@ services:
       - tika
     ports:
       - "8000:8000"
+    healthcheck:
+      test: ["CMD", "curl", "-fs", "-S", "--max-time", "2", "http://localhost:8000"]
+      interval: 30s
+      timeout: 10s
+      retries: 5
     volumes:
       - data:/usr/src/paperless/data
       - media:/usr/src/paperless/media
@@ -59,7 +65,7 @@ services:
       PAPERLESS_TIKA_ENDPOINT: http://tika:9998
 
   gotenberg:
-    image: docker.io/gotenberg/gotenberg:8.7
+    image: docker.io/gotenberg/gotenberg:7.8
     restart: unless-stopped
 
     # The gotenberg chromium route is used to convert .eml files. We do not
@@ -70,7 +76,7 @@ services:
       - "--chromium-allow-list=file:///tmp/.*"
 
   tika:
-    image: docker.io/apache/tika:latest
+    image: ghcr.io/paperless-ngx/tika:latest
     restart: unless-stopped
 
 volumes:

docker/compose/docker-compose.sqlite.yml

@@ -1,4 +1,4 @@
-# Docker Compose file for running paperless from the Docker Hub.
+# docker-compose file for running paperless from the Docker Hub.
 # This file contains everything paperless needs to run.
 # Paperless supports amd64, arm and arm64 hardware.
 #
@@ -16,13 +16,14 @@
 #
 # - Copy this file as 'docker-compose.yml' and the files 'docker-compose.env'
 #   and '.env' into a folder.
-# - Run 'docker compose pull'.
-# - Run 'docker compose run --rm webserver createsuperuser' to create a user.
-# - Run 'docker compose up -d'.
+# - Run 'docker-compose pull'.
+# - Run 'docker-compose run --rm webserver createsuperuser' to create a user.
+# - Run 'docker-compose up -d'.
 #
 # For more extensive installation and update instructions, refer to the
 # documentation.
 
+version: "3.4"
 services:
   broker:
     image: docker.io/library/redis:7
@@ -37,6 +38,11 @@ services:
       - broker
     ports:
       - "8000:8000"
+    healthcheck:
+      test: ["CMD", "curl", "-fs", "-S", "--max-time", "2", "http://localhost:8000"]
+      interval: 30s
+      timeout: 10s
+      retries: 5
     volumes:
       - data:/usr/src/paperless/data
       - media:/usr/src/paperless/media
@@ -46,6 +52,7 @@ services:
     environment:
       PAPERLESS_REDIS: redis://broker:6379
 
+
 volumes:
   data:
   media:

docker/docker-entrypoint.sh

@@ -10,8 +10,8 @@ map_uidgid() {
 	local -r usermap_new_gid=${USERMAP_GID:-${usermap_original_gid:-$usermap_new_uid}}
 	if [[ ${usermap_new_uid} != "${usermap_original_uid}" || ${usermap_new_gid} != "${usermap_original_gid}" ]]; then
 		echo "Mapping UID and GID for paperless:paperless to $usermap_new_uid:$usermap_new_gid"
-		usermod --non-unique --uid "${usermap_new_uid}" paperless
-		groupmod --non-unique --gid "${usermap_new_gid}" paperless
+		usermod -o -u "${usermap_new_uid}" paperless
+		groupmod -o -g "${usermap_new_gid}" paperless
 	fi
 }
 
@@ -42,7 +42,7 @@ custom_container_init() {
 		fi
 
 		# Make sure custom init directory has files in it
-		if [ -n "$(/bin/ls --almost-all "${custom_script_dir}" 2>/dev/null)" ]; then
+		if [ -n "$(/bin/ls -A "${custom_script_dir}" 2>/dev/null)" ]; then
 			echo "[custom-init] files found in ${custom_script_dir} executing"
 			# Loop over files in the directory
 			for SCRIPT in "${custom_script_dir}"/*; do
@@ -86,23 +86,23 @@ initialize() {
 		"${CONSUME_DIR}"; do
 		if [[ ! -d "${dir}" ]]; then
 			echo "Creating directory ${dir}"
-			mkdir --parents --verbose "${dir}"
+			mkdir "${dir}"
 		fi
 	done
 
-	local -r tmp_dir="${PAPERLESS_SCRATCH_DIR:=/tmp/paperless}"
-	echo "Creating directory scratch directory ${tmp_dir}"
-	mkdir --parents --verbose "${tmp_dir}"
+	local -r tmp_dir="/tmp/paperless"
+	echo "Creating directory ${tmp_dir}"
+	mkdir -p "${tmp_dir}"
 
 	set +e
 	echo "Adjusting permissions of paperless files. This may take a while."
-	chown -R paperless:paperless "${tmp_dir}"
+	chown -R paperless:paperless ${tmp_dir}
 	for dir in \
 		"${export_dir}" \
 		"${DATA_DIR}" \
 		"${MEDIA_ROOT_DIR}" \
 		"${CONSUME_DIR}"; do
-		find "${dir}" -not \( -user paperless -and -group paperless \) -exec chown --changes paperless:paperless {} +
+		find "${dir}" -not \( -user paperless -and -group paperless \) -exec chown paperless:paperless {} +
 	done
 	set -e
 
@@ -127,7 +127,7 @@ install_languages() {
 	for lang in "${langs[@]}"; do
 		pkg="tesseract-ocr-$lang"
 
-		if dpkg --status "$pkg" &>/dev/null; then
+		if dpkg -s "$pkg" &>/dev/null; then
 			echo "Package $pkg already installed!"
 			continue
 		fi
@@ -138,7 +138,7 @@ install_languages() {
 		fi
 
 		echo "Installing package $pkg..."
-		if ! apt-get --assume-yes install "$pkg" &>/dev/null; then
+		if ! apt-get -y install "$pkg" &>/dev/null; then
 			echo "Could not install $pkg"
 			exit 1
 		fi
@@ -148,7 +148,7 @@ install_languages() {
 echo "Paperless-ngx docker container starting..."
 
 gosu_cmd=(gosu paperless)
-if [ "$(id --user)" == "$(id --user paperless)" ]; then
+if [ "$(id -u)" == "$(id -u paperless)" ]; then
 	gosu_cmd=()
 fi
 

docker/docker-prepare.sh

@@ -13,7 +13,7 @@ wait_for_postgres() {
 
 	# Disable warning, host and port can't have spaces
 	# shellcheck disable=SC2086
-	while [ ! "$(pg_isready --host ${host} --port ${port})" ]; do
+	while [ ! "$(pg_isready -h ${host} -p ${port})" ]; do
 
 		if [ $attempt_num -eq $max_attempts ]; then
 			echo "Unable to connect to database."
@@ -25,7 +25,6 @@ wait_for_postgres() {
 		attempt_num=$(("$attempt_num" + 1))
 		sleep 5
 	done
-	echo "Connected to PostgreSQL"
 }
 
 wait_for_mariadb() {
@@ -52,7 +51,6 @@ wait_for_mariadb() {
 		attempt_num=$(("$attempt_num" + 1))
 		sleep 5
 	done
-	echo "Connected to MariaDB"
 }
 
 wait_for_redis() {
@@ -82,7 +80,7 @@ django_checks() {
 
 search_index() {
 
-	local -r index_version=9
+	local -r index_version=7
 	local -r index_version_file=${DATA_DIR}/.index_version
 
 	if [[ (! -f "${index_version_file}") || $(<"${index_version_file}") != "$index_version" ]]; then

docker/paperless_cmd.sh

@@ -1,15 +1,14 @@
 #!/usr/bin/env bash
 
-SUPERVISORD_WORKING_DIR="${PAPERLESS_SUPERVISORD_WORKING_DIR:-$PWD}"
 rootless_args=()
 if [ "$(id -u)" == "$(id -u paperless)" ]; then
 	rootless_args=(
 		--user
 		paperless
 		--logfile
-		"${SUPERVISORD_WORKING_DIR}/supervisord.log"
+		supervisord.log
 		--pidfile
-		"${SUPERVISORD_WORKING_DIR}/supervisord.pid"
+		supervisord.pid
 	)
 fi
 

docker/wait-for-redis.py

@@ -4,7 +4,6 @@ Simple script which attempts to ping the Redis broker as set in the environment
 a certain number of times, waiting a little bit in between
 
 """
-
 import os
 import sys
 import time

docs/administration.md

@@ -5,19 +5,17 @@
 Multiple options exist for making backups of your paperless instance,
 depending on how you installed paperless.
 
-Before making a backup, it's probably best to make sure that paperless is not actively
-consuming documents at that time.
+Before making backups, make sure that paperless is not running.
 
 Options available to any installation of paperless:
 
--   Use the [document exporter](#exporter). The document exporter exports all your documents,
-    thumbnails, metadata, and database contents to a specific folder. You may import your
-    documents and settings into a fresh instance of paperless again or store your
-    documents in another DMS with this export.
-
-    The document exporter is also able to update an already existing
-    export. Therefore, incremental backups with `rsync` are entirely
-    possible.
+- Use the [document exporter](#exporter). The document exporter exports all your documents,
+  thumbnails, metadata, and database contents to a specific folder. You may import your
+  documents and settings into a fresh instance of paperless again or store your
+  documents in another DMS with this export.
+- The document exporter is also able to update an already existing
+  export. Therefore, incremental backups with `rsync` are entirely
+  possible.
 
 !!! caution
 
@@ -27,37 +25,31 @@ Options available to any installation of paperless:
 
 Options available to docker installations:
 
--   Backup the docker volumes. These usually reside within
-    `/var/lib/docker/volumes` on the host and you need to be root in
-    order to access them.
+- Backup the docker volumes. These usually reside within
+  `/var/lib/docker/volumes` on the host and you need to be root in
+  order to access them.
 
-    Paperless uses 4 volumes:
+  Paperless uses 4 volumes:
 
-    -   `paperless_media`: This is where your documents are stored.
-    -   `paperless_data`: This is where auxiliary data is stored. This
-        folder also contains the SQLite database, if you use it.
-    -   `paperless_pgdata`: Exists only if you use PostgreSQL and
-        contains the database.
-    -   `paperless_dbdata`: Exists only if you use MariaDB and contains
-        the database.
+  - `paperless_media`: This is where your documents are stored.
+  - `paperless_data`: This is where auxillary data is stored. This
+    folder also contains the SQLite database, if you use it.
+  - `paperless_pgdata`: Exists only if you use PostgreSQL and
+    contains the database.
+  - `paperless_dbdata`: Exists only if you use MariaDB and contains
+    the database.
 
 Options available to bare-metal and non-docker installations:
 
--   Backup the entire paperless folder. This ensures that if your
-    paperless instance crashes at some point or your disk fails, you can
-    simply copy the folder back into place and it works.
+- Backup the entire paperless folder. This ensures that if your
+  paperless instance crashes at some point or your disk fails, you can
+  simply copy the folder back into place and it works.
 
-    When using PostgreSQL or MariaDB, you'll also have to backup the
-    database.
+  When using PostgreSQL or MariaDB, you'll also have to backup the
+  database.
 
 ### Restoring {#migrating-restoring}
 
-If you've backed-up Paperless-ngx using the [document exporter](#exporter),
-restoring can simply be done with the [document importer](#importer).
-
-Of course, other backup strategies require restoring any volumes, folders and database
-copies you created in the steps above.
-
 ## Updating Paperless {#updating}
 
 ### Docker Route {#docker-updating}
@@ -67,34 +59,34 @@ you installed paperless-ngx in the first place. The releases are
 available at the [release
 page](https://github.com/paperless-ngx/paperless-ngx/releases).
 
-First of all, make sure no active processes (like consumption) are running, then [make a backup](#backup).
-
-After that, ensure that paperless is stopped:
+First of all, ensure that paperless is stopped.
 
 ```shell-session
 $ cd /path/to/paperless
-$ docker compose down
+$ docker-compose down
 ```
 
+After that, [make a backup](#backup).
+
 1.  If you pull the image from the docker hub, all you need to do is:
 
     ```shell-session
-    $ docker compose pull
-    $ docker compose up
+    $ docker-compose pull
+    $ docker-compose up
     ```
 
-    The Docker Compose files refer to the `latest` version, which is
+    The docker-compose files refer to the `latest` version, which is
     always the latest stable release.
 
 1.  If you built the image yourself, do the following:
 
     ```shell-session
     $ git pull
-    $ docker compose build
-    $ docker compose up
+    $ docker-compose build
+    $ docker-compose up
     ```
 
-Running `docker compose up` will also apply any new database migrations.
+Running `docker-compose up` will also apply any new database migrations.
 If you see everything working, press CTRL+C once to gracefully stop
 paperless. Then you can start paperless-ngx with `-d` to have it run in
 the background.
@@ -102,7 +94,7 @@ the background.
 !!! note
 
     In version 0.9.14, the update process was changed. In 0.9.13 and
-    earlier, the Docker Compose files specified exact versions and pull
+    earlier, the docker-compose files specified exact versions and pull
     won't automatically update to newer versions. In order to enable
     updates as described above, either get the new `docker-compose.yml`
     file from
@@ -185,12 +177,34 @@ For PostgreSQL, refer to [Upgrading a PostgreSQL Cluster](https://www.postgresql
 
 For MariaDB, refer to [Upgrading MariaDB](https://mariadb.com/kb/en/upgrading/)
 
-You may also use the exporter and importer with the `--data-only` flag, after creating a new database with the updated version of PostgreSQL or MariaDB.
+## Downgrading Paperless {#downgrade-paperless}
 
-!!! warning
+Downgrades are possible. However, some updates also contain database
+migrations (these change the layout of the database and may move data).
+In order to move back from a version that applied database migrations,
+you'll have to revert the database migration _before_ downgrading, and
+then downgrade paperless.
 
-    You should not change any settings, especially paths, when doing this or there is a
-    risk of data loss
+This table lists the compatible versions for each database migration
+number.
+
+| Migration number | Version range   |
+| ---------------- | --------------- |
+| 1011             | 1.0.0           |
+| 1012             | 1.1.0 - 1.2.1   |
+| 1014             | 1.3.0 - 1.3.1   |
+| 1016             | 1.3.2 - current |
+
+Execute the following management command to migrate your database:
+
+```shell-session
+$ python3 manage.py migrate documents <migration number>
+```
+
+!!! note
+
+    Some migrations cannot be undone. The command will issue errors if that
+    happens.
 
 ## Management utilities {#management-commands}
 
@@ -198,11 +212,11 @@ Paperless comes with some management commands that perform various
 maintenance tasks on your paperless instance. You can invoke these
 commands in the following way:
 
-With Docker Compose, while paperless is running:
+With docker-compose, while paperless is running:
 
 ```shell-session
 $ cd /path/to/paperless
-$ docker compose exec webserver <command> <arguments>
+$ docker-compose exec webserver <command> <arguments>
 ```
 
 With docker, while paperless is running:
@@ -232,7 +246,7 @@ migration to another DMS.
 If you use the document exporter within a cronjob to backup your data
 you might use the `-T` flag behind exec to suppress "The input device
 is not a TTY" errors. For example:
-`docker compose exec -T webserver document_exporter ../export`
+`docker-compose exec -T webserver document_exporter ../export`
 
 ```
 document_exporter target [-c] [-d] [-f] [-na] [-nt] [-p] [-sm] [-z]
@@ -247,9 +261,6 @@ optional arguments:
 -sm, --split-manifest
 -z,  --zip
 -zn, --zip-name
---data-only
---no-progress-bar
---passphrase
 ```
 
 `target` is a folder to which the data gets written. This includes
@@ -308,16 +319,6 @@ If `-z` or `--zip` is provided, the export will be a zip file
 in the target directory, named according to the current local date or the
 value set in `-zn` or `--zip-name`.
 
-If `--data-only` is provided, only the database will be exported. This option is intended
-to facilitate database upgrades without needing to clean documents and thumbnails from the media directory.
-
-If `--no-progress-bar` is provided, the progress bar will be hidden, rendering the
-exporter quiet. This option is useful for scripting scenarios, such as when using the
-exporter with `crontab`.
-
-If `--passphrase` is provided, it will be used to encrypt certain fields in the export. This value
-must be provided to import. If this value is lost, the export cannot be imported.
-
 !!! warning
 
     If exporting with the file name format, there may be errors due to
@@ -332,34 +333,19 @@ exporter](#exporter) and imports it into paperless.
 The importer works just like the exporter. You point it at a directory,
 and the script does the rest of the work:
 
-```shell
+```
 document_importer source
 ```
 
-| Option              | Required | Default | Description                                                               |
-| ------------------- | -------- | ------- | ------------------------------------------------------------------------- |
-| source              | Yes      | N/A     | The directory containing an export                                        |
-| `--no-progress-bar` | No       | False   | If provided, the progress bar will be hidden                              |
-| `--data-only`       | No       | False   | If provided, only import data, do not import document files or thumbnails |
-| `--passphrase`      | No       | N/A     | If your export was encrypted with a passphrase, must be provided          |
-
 When you use the provided docker compose script, put the export inside
 the `export` folder in your paperless source directory. Specify
 `../export` as the `source`.
 
-Note that .zip files (as can be generated from the exporter) are not supported. You must unzip them into
-the target directory first.
-
 !!! note
 
     Importing from a previous version of Paperless may work, but for best
     results it is suggested to match the versions.
 
-!!! warning
-
-    The importer should be run against a completely empty installation (database and directories) of Paperless-ngx.
-    If using a data only import, only the database must be empty.
-
 ### Document retagger {#retagger}
 
 Say you've imported a few hundred documents and now want to introduce a
@@ -414,7 +400,7 @@ that don't match a document anymore get removed as well.
 ### Managing the Automatic matching algorithm
 
 The _Auto_ matching algorithm requires a trained neural network to work.
-This network needs to be updated whenever something in your data
+This network needs to be updated whenever somethings in your data
 changes. The docker image takes care of that automatically with the task
 scheduler. You can manually renew the classifier by invoking the
 following management command:
@@ -484,19 +470,19 @@ collection for issues.
 
 The issues detected by the sanity checker are as follows:
 
--   Missing original files.
--   Missing archive files.
--   Inaccessible original files due to improper permissions.
--   Inaccessible archive files due to improper permissions.
--   Corrupted original documents by comparing their checksum against
-    what is stored in the database.
--   Corrupted archive documents by comparing their checksum against what
-    is stored in the database.
--   Missing thumbnails.
--   Inaccessible thumbnails due to improper permissions.
--   Documents without any content (warning).
--   Orphaned files in the media directory (warning). These are files
-    that are not referenced by any document in paperless.
+- Missing original files.
+- Missing archive files.
+- Inaccessible original files due to improper permissions.
+- Inaccessible archive files due to improper permissions.
+- Corrupted original documents by comparing their checksum against
+  what is stored in the database.
+- Corrupted archive documents by comparing their checksum against what
+  is stored in the database.
+- Missing thumbnails.
+- Inaccessible thumbnails due to improper permissions.
+- Documents without any content (warning).
+- Orphaned files in the media directory (warning). These are files
+  that are not referenced by any document in paperless.
 
 ```
 document_sanity_checker
@@ -586,7 +572,7 @@ Enabling encryption is no longer supported.
 
 Basic usage to disable encryption of your document store:
 
-(Note: If `PAPERLESS_PASSPHRASE` isn't set already, you need to specify
+(Note: If [`PAPERLESS_PASSPHRASE`](configuration.md#PAPERLESS_PASSPHRASE) isn't set already, you need to specify
 it here)
 
 ```
@@ -603,7 +589,7 @@ This tool does a fuzzy match over document content, looking for
 those which look close according to a given ratio.
 
 At this time, other metadata (such as correspondent or type) is not
-taken into account by the detection.
+take into account by the detection.
 
 ```
 document_fuzzy_match [--ratio] [--processes N]
@@ -613,10 +599,3 @@ document_fuzzy_match [--ratio] [--processes N]
 | ----------- | -------- | ------------------- | ------------------------------------------------------------------------------------------------------------------------------ |
 | --ratio     | No       | 85.0                | a number between 0 and 100, setting how similar a document must be for it to be reported. Higher numbers mean more similarity. |
 | --processes | No       | 1/4 of system cores | Number of processes to use for matching. Setting 1 disables multiple processes                                                 |
-| --delete    | No       | False               | If provided, one document of a matched pair above the ratio will be deleted.                                                   |
-
-!!! warning
-
-    If providing the `--delete` option, it is highly recommended to have a backup.
-    While every effort has been taken to ensure proper operation, there is always the
-    chance of deletion of a file you want to keep.

docs/advanced_usage.md

@@ -36,7 +36,7 @@ The following algorithms are available:
 - **Regular expression:** Parses the match as a regular expression and
   tries to find a match within the document.
 - **Fuzzy match:** Uses a partial matching based on locating the tag text
-  inside the document, using a [partial ratio](https://rapidfuzz.github.io/RapidFuzz/Usage/fuzz.html#partial-ratio)
+  inside the document, using a [partial ratio](https://maxbachmann.github.io/RapidFuzz/Usage/fuzz.html#partial-ratio)
 - **Auto:** Tries to automatically match new documents. This does not
   require you to set a match. See the [notes below](#automatic-matching).
 
@@ -136,11 +136,6 @@ script can access the following relevant environment variables set:
     be triggered, leading to failures as two tasks work on the
     same document path
 
-!!! warning
-
-    If your script modifies `DOCUMENT_WORKING_PATH` in a non-deterministic
-    way, this may allow duplicate documents to be stored
-
 A simple but common example for this would be creating a simple script
 like this:
 
@@ -187,7 +182,6 @@ variables:
 | `DOCUMENT_THUMBNAIL_PATH`    | Path to the generated thumbnail                |
 | `DOCUMENT_DOWNLOAD_URL`      | URL for document download                      |
 | `DOCUMENT_THUMBNAIL_URL`     | URL for the document thumbnail                 |
-| `DOCUMENT_OWNER`             | Username of the document owner (if any)        |
 | `DOCUMENT_CORRESPONDENT`     | Assigned correspondent (if any)                |
 | `DOCUMENT_TAGS`              | Comma separated list of tags applied (if any)  |
 | `DOCUMENT_ORIGINAL_FILENAME` | Filename of original document                  |
@@ -242,8 +236,8 @@ webserver:
 
 Troubleshooting:
 
-- Monitor the Docker Compose log
-  `cd ~/paperless-ngx; docker compose logs -f`
+- Monitor the docker-compose log
+  `cd ~/paperless-ngx; docker-compose logs -f`
 - Check your script's permission e.g. in case of permission error
   `sudo chmod 755 post-consumption-example.sh`
 - Pipe your scripts's output to a log file e.g.
@@ -257,8 +251,7 @@ document. You will end up getting files like `0000123.pdf` in your media
 directory. This isn't necessarily a bad thing, because you normally
 don't have to access these files manually. However, if you wish to name
 your files differently, you can do that by adjusting the
-[`PAPERLESS_FILENAME_FORMAT`](configuration.md#PAPERLESS_FILENAME_FORMAT) configuration option
-or using [storage paths (see below)](#storage-paths). Paperless adds the
+[`PAPERLESS_FILENAME_FORMAT`](configuration.md#PAPERLESS_FILENAME_FORMAT) configuration option. Paperless adds the
 correct file extension e.g. `.pdf`, `.jpg` automatically.
 
 This variable allows you to configure the filename (folders are allowed)
@@ -291,15 +284,6 @@ will create a directory structure as follows:
     paperless will report your files as missing and won't be able to find
     them.
 
-!!! tip
-
-    Paperless checks the filename of a document whenever it is saved. Changing (or deleting)
-    a [storage path](#storage-paths) will automatically be reflected in the file system. However,
-    when changing `PAPERLESS_FILENAME_FORMAT` you will need to manually run the
-    [`document renamer`](administration.md#renamer) to move any existing documents.
-
-#### Placeholders
-
 Paperless provides the following placeholders within filenames:
 
 - `{asn}`: The archive serial number of the document, or "none".
@@ -332,12 +316,6 @@ Paperless provides the following placeholders within filenames:
 - `{original_name}`: Document original filename, minus the extension, if any, or "none"
 - `{doc_pk}`: The paperless identifier (primary key) for the document.
 
-!!! warning
-
-    When using file name placeholders, in particular when using `{tag_list}`,
-    you may run into the limits of your operating system's maximum path lengths.
-    In that case, files will retain the previous path instead and the issue logged.
-
 Paperless will try to conserve the information from your database as
 much as possible. However, some characters that you can use in document
 titles and correspondent names (such as `: \ /` and a couple more) are
@@ -348,12 +326,34 @@ paperless will automatically append `_01`, `_02`, etc to the filename.
 This happens if all the placeholders in a filename evaluate to the same
 value.
 
-If there are any errors in the placeholders included in `PAPERLESS_FILENAME_FORMAT`,
-paperless will fall back to using the default naming scheme instead.
+!!! tip
+
+    You can affect how empty placeholders are treated by changing the
+    following setting to `true`.
+
+    ```
+    PAPERLESS_FILENAME_FORMAT_REMOVE_NONE=True
+    ```
+
+    Doing this results in all empty placeholders resolving to "" instead
+    of "none" as stated above. Spaces before empty placeholders are
+    removed as well, empty directories are omitted.
+
+!!! tip
+
+    Paperless checks the filename of a document whenever it is saved.
+    Therefore, you need to update the filenames of your documents and move
+    them after altering this setting by invoking the
+    [`document renamer`](administration.md#renamer).
+
+!!! warning
+
+    Make absolutely sure you get the spelling of the placeholders right, or
+    else paperless will use the default naming scheme instead.
 
 !!! caution
 
-    As of now, you could potentially tell paperless to store your files anywhere
+    As of now, you could totally tell paperless to store your files anywhere
     outside the media directory by setting
 
     ```
@@ -361,25 +361,28 @@ paperless will fall back to using the default naming scheme instead.
     ```
 
     However, keep in mind that inside docker, if files get stored outside of
-    the predefined volumes, they will be lost after a restart.
+    the predefined volumes, they will be lost after a restart of paperless.
 
-##### Empty placeholders
+!!! warning
 
-You can affect how empty placeholders are treated by changing the
-[`PAPERLESS_FILENAME_FORMAT_REMOVE_NONE`](configuration.md#PAPERLESS_FILENAME_FORMAT_REMOVE_NONE) setting.
+    When file naming handling, in particular when using `{tag_list}`,
+    you may run into the limits of your operating system's maximum
+    path lengths.  Files will retain the previous path instead and
+    the issue logged.
 
-Enabling this results in all empty placeholders resolving to "" instead of "none" as stated above. Spaces
-before empty placeholders are removed as well, empty directories are omitted.
+## Storage paths
 
-### Storage paths
+One of the best things in Paperless is that you can not only access the
+documents via the web interface, but also via the file system.
 
-When a single storage layout is not sufficient for your use case, storage paths allow for more complex
-structure to set precisely where each document is stored in the file system.
+When a single storage layout is not sufficient for your use case,
+storage paths come to the rescue. Storage paths allow you to configure
+more precisely where each document is stored in the file system.
 
 - Each storage path is a [`PAPERLESS_FILENAME_FORMAT`](configuration.md#PAPERLESS_FILENAME_FORMAT) and
   follows the rules described above
-- Each document is assigned a storage path using the matching algorithms described above, but can be
-  overwritten at any time
+- Each document is assigned a storage path using the matching
+  algorithms described above, but can be overwritten at any time
 
 For example, you could define the following two storage paths:
 
@@ -426,10 +429,8 @@ to view more detailed information about the health of the celery workers
 used for asynchronous tasks. This includes details on currently running,
 queued and completed tasks, timing and more. Flower can also be used
 with Prometheus, as it exports metrics. For details on its capabilities,
-refer to the [Flower](https://flower.readthedocs.io/en/latest/index.html)
-documentation.
+refer to the Flower documentation.
 
-Flower can be enabled with the setting [PAPERLESS_ENABLE_FLOWER](configuration.md#PAPERLESS_ENABLE_FLOWER).
 To configure Flower further, create a `flowerconfig.py` and
 place it into the `src/paperless` directory. For a Docker
 installation, you can use volumes to accomplish this:
@@ -438,8 +439,6 @@ installation, you can use volumes to accomplish this:
 services:
   # ...
   webserver:
-    environment:
-      - PAPERLESS_ENABLE_FLOWER
     ports:
       - 5555:5555 # (2)!
     # ...
@@ -448,7 +447,7 @@ services:
 ```
 
 1. Note the `:ro` tag means the file will be mounted as read only.
-2. By default, Flower runs on port 5555, but this can be configured.
+2. `flower` runs by default on port 5555, but this can be configured
 
 ## Custom Container Initialization
 
@@ -509,21 +508,9 @@ existing tables) with:
     an older system may fix issues that can arise while setting up Paperless-ngx but
     `utf8mb3` can cause issues with consumption (where `utf8mb4` does not).
 
-### Missing timezones
-
-MySQL as well as MariaDB do not have any timezone information by default (though some
-docker images such as the official MariaDB image take care of this for you) which will
-cause unexpected behavior with date-based queries.
-
-To fix this, execute one of the following commands:
-
-MySQL: `mysql_tzinfo_to_sql /usr/share/zoneinfo | mysql -u root mysql -p`
-
-MariaDB: `mariadb-tzinfo-to-sql /usr/share/zoneinfo | mariadb -u root mysql -p`
-
 ## Barcodes {#barcodes}
 
-Paperless is able to utilize barcodes for automatically performing some tasks.
+Paperless is able to utilize barcodes for automatically preforming some tasks.
 
 At this time, the library utilized for detection of barcodes supports the following types:
 
@@ -561,14 +548,6 @@ barcode is located. However, differing from the splitting, the page with the
 barcode _will_ be retained. This allows application of a barcode to any page, including
 one which holds data to keep in the document.
 
-### Tag Assignment
-
-When enabled, Paperless will parse barcodes and attempt to interpret and assign tags.
-
-See the relevant settings [`PAPERLESS_CONSUMER_ENABLE_TAG_BARCODE`](configuration.md#PAPERLESS_CONSUMER_ENABLE_TAG_BARCODE)
-and [`PAPERLESS_CONSUMER_TAG_BARCODE_MAPPING`](configuration.md#PAPERLESS_CONSUMER_TAG_BARCODE_MAPPING)
-for more information.
-
 ## Automatic collation of double-sided documents {#collate}
 
 !!! note
@@ -587,7 +566,7 @@ collating two separate scans into one document, reordering the pages as necessar
 
 Suppose you have a double-sided document with 6 pages (3 sheets of paper). First,
 put the stack into your ADF as normal, ensuring that page 1 is scanned first. Your ADF
-will now scan pages 1, 3, and 5. Then you (or your scanner, if it supports it) upload
+will now scan pages 1, 3, and 5. Then you (or your the scanner, if it supports it) upload
 the scan into the correct sub-directory of the consume folder (`double-sided` by default;
 keep in mind that Paperless will _not_ automatically create the directory for you.)
 Paperless will then process the scan and move it into an internal staging area.
@@ -629,7 +608,7 @@ scan a completely new "odd numbered pages" one. The old staging file will get di
 
 The collation feature can be used together with the [subdirs as tags](configuration.md#consume_config)
 feature (but this is not a requirement). Just create a correctly named double-sided subdir
-in the hierarchy and upload your scans there. For example, both `double-sided/foo/bar` as
+in the hierachy and upload your scans there. For example, both `double-sided/foo/bar` as
 well as `foo/bar/double-sided` will cause the collated document to be treated as if it
 were uploaded into `foo/bar` and receive both `foo` and `bar` tags, but not `double-sided`.
 
@@ -640,53 +619,3 @@ single-sided split marker page, the split document(s) will have an empty page at
 whatever else was on the backside of the split marker page.) You can work around that by having
 a split marker page that has the split barcode on _both_ sides. This way, the extra page will
 get automatically removed.
-
-## SSO and third party authentication with Paperless-ngx
-
-Paperless-ngx has a built-in authentication system from Django but you can easily integrate an
-external authentication solution using one of the following methods:
-
-### Remote User authentication
-
-This is a simple option that uses remote user authentication made available by certain SSO
-applications. See the relevant configuration options for more information:
-[PAPERLESS_ENABLE_HTTP_REMOTE_USER](configuration.md#PAPERLESS_ENABLE_HTTP_REMOTE_USER),
-[PAPERLESS_HTTP_REMOTE_USER_HEADER_NAME](configuration.md#PAPERLESS_HTTP_REMOTE_USER_HEADER_NAME)
-and [PAPERLESS_LOGOUT_REDIRECT_URL](configuration.md#PAPERLESS_LOGOUT_REDIRECT_URL)
-
-### OpenID Connect and social authentication
-
-Version 2.5.0 of Paperless-ngx added support for integrating other authentication systems via
-the [django-allauth](https://github.com/pennersr/django-allauth) package. Once set up, users
-can either log in or (optionally) sign up using any third party systems you integrate. See the
-relevant [configuration settings](configuration.md#PAPERLESS_SOCIALACCOUNT_PROVIDERS) and
-[django-allauth docs](https://docs.allauth.org/en/latest/socialaccount/configuration.html)
-for more information.
-
-To associate an existing Paperless-ngx account with a social account, first login with your
-regular credentials and then choose "My Profile" from the user dropdown in the app and you
-will see options to connect social account(s). If enabled, signup options will be available
-on the login page.
-
-As an example, to set up login via Github, the following environment variables would need to be
-set:
-
-```conf
-PAPERLESS_APPS="allauth.socialaccount.providers.github"
-PAPERLESS_SOCIALACCOUNT_PROVIDERS='{"github": {"APPS": [{"provider_id": "github","name": "Github","client_id": "<CLIENT_ID>","secret": "<CLIENT_SECRET>"}]}}'
-```
-
-Or, to use OpenID Connect ("OIDC"), via Keycloak in this example:
-
-```conf
-PAPERLESS_APPS="allauth.socialaccount.providers.openid_connect"
-PAPERLESS_SOCIALACCOUNT_PROVIDERS='
-{"openid_connect": {"APPS": [{"provider_id": "keycloak","name": "Keycloak","client_id": "paperless","secret": "<CLIENT_SECRET>","settings": { "server_url": "https://<KEYCLOAK_SERVER>/realms/<REALM>/.well-known/openid-configuration"}}]}}'
-```
-
-More details about configuration option for various providers can be found in the [allauth documentation](https://docs.allauth.org/en/latest/socialaccount/providers/index.html#provider-specifics).
-
-### Disabling Regular Login
-
-Once external auth is set up, 'regular' login can be disabled with the [PAPERLESS_DISABLE_REGULAR_LOGIN](configuration.md#PAPERLESS_DISABLE_REGULAR_LOGIN) setting and / or users can be automatically
-redirected with the [PAPERLESS_REDIRECT_LOGIN_TO_SSO](configuration.md#PAPERLESS_REDIRECT_LOGIN_TO_SSO) setting.

docs/api.md

@@ -8,23 +8,19 @@ most of the available filters and ordering fields.
 
 The API provides the following main endpoints:
 
-- `/api/correspondents/`: Full CRUD support.
-- `/api/custom_fields/`: Full CRUD support.
 - `/api/documents/`: Full CRUD support, except POSTing new documents.
-  See [below](#file-uploads).
+  See below.
+- `/api/correspondents/`: Full CRUD support.
 - `/api/document_types/`: Full CRUD support.
-- `/api/groups/`: Full CRUD support.
 - `/api/logs/`: Read-Only.
-- `/api/mail_accounts/`: Full CRUD support.
-- `/api/mail_rules/`: Full CRUD support.
-- `/api/profile/`: GET, PATCH
-- `/api/share_links/`: Full CRUD support.
-- `/api/storage_paths/`: Full CRUD support.
 - `/api/tags/`: Full CRUD support.
 - `/api/tasks/`: Read-only.
+- `/api/mail_accounts/`: Full CRUD support.
+- `/api/mail_rules/`: Full CRUD support.
 - `/api/users/`: Full CRUD support.
-- `/api/workflows/`: Full CRUD support.
-- `/api/search/` GET, see [below](#global-search).
+- `/api/groups/`: Full CRUD support.
+- `/api/share_links/`: Full CRUD support.
+- `/api/custom_fields/`: Full CRUD support.
 
 All of these endpoints except for the logging endpoint allow you to
 fetch (and edit and delete where appropriate) individual objects by
@@ -57,11 +53,7 @@ fields:
 - `set_permissions`: Allows setting document permissions. Optional,
   write-only. See [below](#permissions).
 - `custom_fields`: Array of custom fields & values, specified as
-  `{ field: CUSTOM_FIELD_ID, value: VALUE }`
-
-!!! note
-
-    Note that all endpoint URLs must end with a `/`slash.
+  { field: CUSTOM_FIELD_ID, value: VALUE }
 
 ## Downloading documents
 
@@ -141,11 +133,10 @@ document. Paperless only reports PDF metadata at this point.
 
 - `/api/documents/<id>/notes/`: Retrieve notes for a document.
 - `/api/documents/<id>/share_links/`: Retrieve share links for a document.
-- `/api/documents/<id>/history/`: Retrieve history of changes for a document.
 
 ## Authorization
 
-The REST api provides four different forms of authentication.
+The REST api provides three different forms of authentication.
 
 1.  Basic authentication
 
@@ -166,10 +157,6 @@ The REST api provides four different forms of authentication.
 
 3.  Token authentication
 
-    You can create (or re-create) an API token by opening the "My Profile"
-    link in the user dropdown found in the web UI and clicking the circular
-    arrow button.
-
     Paperless also offers an endpoint to acquire authentication tokens.
 
     POST a username and password as a form or json string to
@@ -181,45 +168,7 @@ The REST api provides four different forms of authentication.
     Authorization: Token <token>
     ```
 
-    Tokens can also be managed in the Django admin.
-
-4.  Remote User authentication
-
-    If enabled (see
-    [configuration](configuration.md#PAPERLESS_ENABLE_HTTP_REMOTE_USER_API)),
-    you can authenticate against the API using Remote User auth.
-
-## Global search
-
-A global search endpoint is available at `/api/search/` and requires a search term
-of > 2 characters e.g. `?query=foo`. This endpoint returns a maximum of 3 results
-across nearly all objects, e.g. documents, tags, saved views, mail rules, etc.
-Results are only included if the requesting user has the appropriate permissions.
-
-Results are returned in the following format:
-
-```json
-{
-  total: number
-  documents: []
-  saved_views: []
-  correspondents: []
-  document_types: []
-  storage_paths: []
-  tags: []
-  users: []
-  groups: []
-  mail_accounts: []
-  mail_rules: []
-  custom_fields: []
-  workflows: []
-}
-```
-
-Global search first searches objects by name (or title for documents) matching the query.
-If the optional `db_only` parameter is set, only document titles will be searched. Otherwise,
-if the amount of documents returned by a simple title string search is < 3, results from the
-search index will also be included.
+    Tokens can be managed and revoked in the paperless admin.
 
 ## Searching for documents
 
@@ -229,7 +178,7 @@ results:
 
 - `/api/documents/?query=your%20search%20query`: Search for a document
   using a full text query. For details on the syntax, see [Basic Usage - Searching](usage.md#basic-usage_searching).
-- `/api/documents/?more_like_id=1234`: Search for documents similar to
+- `/api/documents/?more_like=1234`: Search for documents similar to
   the document with id 1234.
 
 Pagination works exactly the same as it does for normal requests on this
@@ -318,12 +267,9 @@ The endpoint supports the following optional form fields:
 - `correspondent`: Specify the ID of a correspondent that the consumer
   should use for the document.
 - `document_type`: Similar to correspondent.
-- `storage_path`: Similar to correspondent.
 - `tags`: Similar to correspondent. Specify this multiple times to
   have multiple tags added to the document.
 - `archive_serial_number`: An optional archive serial number to set.
-- `custom_fields`: An array of custom field ids to assign (with an empty
-  value) to the document.
 
 The endpoint will immediately return HTTP 200 if the document consumption
 process was started successfully, with the UUID of the consumption task
@@ -370,86 +316,6 @@ granted). You can pass the parameter `full_perms=true` to API calls to view the
 full permissions of objects in a format that mirrors the `set_permissions`
 parameter above.
 
-## Bulk Editing
-
-The API supports various bulk-editing operations which are executed asynchronously.
-
-### Documents
-
-For bulk operations on documents, use the endpoint `/api/documents/bulk_edit/` which accepts
-a json payload of the format:
-
-```json
-{
-  "documents": [LIST_OF_DOCUMENT_IDS],
-  "method": METHOD, // see below
-  "parameters": args // see below
-}
-```
-
-The following methods are supported:
-
-- `set_correspondent`
-  - Requires `parameters`: `{ "correspondent": CORRESPONDENT_ID }`
-- `set_document_type`
-  - Requires `parameters`: `{ "document_type": DOCUMENT_TYPE_ID }`
-- `set_storage_path`
-  - Requires `parameters`: `{ "storage_path": STORAGE_PATH_ID }`
-- `add_tag`
-  - Requires `parameters`: `{ "tag": TAG_ID }`
-- `remove_tag`
-  - Requires `parameters`: `{ "tag": TAG_ID }`
-- `modify_tags`
-  - Requires `parameters`: `{ "add_tags": [LIST_OF_TAG_IDS] }` and / or `{ "remove_tags": [LIST_OF_TAG_IDS] }`
-- `delete`
-  - No `parameters` required
-- `reprocess`
-  - No `parameters` required
-- `set_permissions`
-  - Requires `parameters`:
-    - `"set_permissions": PERMISSIONS_OBJ` (see format [above](#permissions)) and / or
-    - `"owner": OWNER_ID or null`
-    - `"merge": true or false` (defaults to false)
-  - The `merge` flag determines if the supplied permissions will overwrite all existing permissions (including
-    removing them) or be merged with existing permissions.
-- `merge`
-  - No additional `parameters` required.
-  - The ordering of the merged document is determined by the list of IDs.
-  - Optional `parameters`:
-    - `"metadata_document_id": DOC_ID` apply metadata (tags, correspondent, etc.) from this document to the merged document.
-    - `"delete_originals": true` to delete the original documents. This requires the calling user being the owner of
-      all documents that are merged.
-- `split`
-  - Requires `parameters`:
-    - `"pages": [..]` The list should be a list of pages and/or a ranges, separated by commas e.g. `"[1,2-3,4,5-7]"`
-  - Optional `parameters`:
-    - `"delete_originals": true` to delete the original document after consumption. This requires the calling user being the owner of
-      the document.
-  - The split operation only accepts a single document.
-- `rotate`
-  - Requires `parameters`:
-    - `"degrees": DEGREES`. Must be an integer i.e. 90, 180, 270
-- `delete_pages`
-  - Requires `parameters`:
-    - `"pages": [..]` The list should be a list of integers e.g. `"[2,3,4]"`
-  - The delete_pages operation only accepts a single document.
-
-### Objects
-
-Bulk editing for objects (tags, document types etc.) currently supports set permissions or delete
-operations, using the endpoint: `/api/bulk_edit_objects/`, which requires a json payload of the format:
-
-```json
-{
-  "objects": [LIST_OF_OBJECT_IDS],
-  "object_type": "tags", "correspondents", "document_types" or "storage_paths",
-  "operation": "set_permissions" or "delete",
-  "owner": OWNER_ID, // optional
-  "permissions": { "view": { "users": [] ... }, "change": { ... } }, // (see 'set_permissions' format above)
-  "merge": true / false // defaults to false, see above
-}
-```
-
 ## API Versioning
 
 The REST API is versioned since Paperless-ngx 1.3.0.
@@ -506,13 +372,3 @@ Initial API version.
   color to use for a specific tag, which is either black or white
   depending on the brightness of `Tag.color`.
 - Removed field `Tag.colour`.
-
-#### Version 3
-
-- Permissions endpoints have been added.
-- The format of the `/api/ui_settings/` has changed.
-
-#### Version 4
-
-- Consumption templates were refactored to workflows and API endpoints
-  changed as such.

docs/configuration.md

@@ -3,11 +3,6 @@
 Paperless provides a wide range of customizations. Depending on how you
 run paperless, these settings have to be defined in different places.
 
-Certain configuration options may be set via the UI. This currently includes
-common [OCR](#ocr) related settings and some frontend settings. If set, these will take
-preference over the settings via environment variables. If not set, the environment setting
-or applicable default will be utilized instead.
-
 - If you run paperless on docker, `paperless.conf` is not used.
   Rather, configure paperless by copying necessary options to
   `docker-compose.env`.
@@ -34,8 +29,6 @@ matcher.
         `redis://<username>:<password>@<host>:<port>`
     -   With the requirepass option PAPERLESS_REDIS =
         `redis://:<password>@<host>:<port>`
-    -   To include the redis database index PAPERLESS_REDIS =
-        `redis://<username>:<password>@<host>:<port>/<DBIndex>`
 
     [More information on securing your Redis
     Instance](https://redis.io/docs/getting-started/#securing-redis).
@@ -177,18 +170,18 @@ configure their endpoints, and enable the feature.
 
 #### [`PAPERLESS_TIKA_ENDPOINT=<url>`](#PAPERLESS_TIKA_ENDPOINT) {#PAPERLESS_TIKA_ENDPOINT}
 
-: Set the endpoint URL where Paperless can reach your Tika server.
+: Set the endpoint URL were Paperless can reach your Tika server.
 
     Defaults to "<http://localhost:9998>".
 
 #### [`PAPERLESS_TIKA_GOTENBERG_ENDPOINT=<url>`](#PAPERLESS_TIKA_GOTENBERG_ENDPOINT) {#PAPERLESS_TIKA_GOTENBERG_ENDPOINT}
 
-: Set the endpoint URL where Paperless can reach your Gotenberg server.
+: Set the endpoint URL were Paperless can reach your Gotenberg server.
 
     Defaults to "<http://localhost:3000>".
 
 If you run paperless on docker, you can add those services to the
-Docker Compose file (see the provided
+docker-compose file (see the provided
 [`docker-compose.sqlite-tika.yml`](https://github.com/paperless-ngx/paperless-ngx/blob/main/docker/compose/docker-compose.sqlite-tika.yml)
 file for reference).
 
@@ -202,7 +195,7 @@ and watch out for indentation if editing the YAML file.
 
 #### [`PAPERLESS_CONSUMPTION_DIR=<path>`](#PAPERLESS_CONSUMPTION_DIR) {#PAPERLESS_CONSUMPTION_DIR}
 
-: This is where your documents should go to be consumed. Make sure that
+: This where your documents should go to be consumed. Make sure that
 it exists and that the user running the paperless service can
 read/write its contents before you start Paperless.
 
@@ -219,20 +212,16 @@ database, classification model, etc).
 
     Defaults to "../data/", relative to the "src" directory.
 
-#### [`PAPERLESS_EMPTY_TRASH_DIR=<path>`](#PAPERLESS_EMPTY_TRASH_DIR) {#PAPERLESS_EMPTY_TRASH_DIR}
+#### [`PAPERLESS_TRASH_DIR=<path>`](#PAPERLESS_TRASH_DIR) {#PAPERLESS_TRASH_DIR}
 
-: When documents are deleted (e.g. after emptying the trash) the original files will be moved here
-instead of being removed from the filesystem. Only the original version is kept.
+: Instead of removing deleted documents, they are moved to this
+directory.
 
     This must be writeable by the user running paperless. When running
     inside docker, ensure that this path is within a permanent volume
     (such as "../media/trash") so it won't get lost on upgrades.
 
-    Note that the directory must exist prior to using this setting.
-
-    Defaults to empty (i.e. really delete files).
-
-    This setting was previously named PAPERLESS_TRASH_DIR.
+    Defaults to empty (i.e. really delete documents).
 
 #### [`PAPERLESS_MEDIA_ROOT=<path>`](#PAPERLESS_MEDIA_ROOT) {#PAPERLESS_MEDIA_ROOT}
 
@@ -266,7 +255,7 @@ directory. See [File name handling](advanced_usage.md#file-name-handling) for de
 : Tells paperless to replace placeholders in
 `PAPERLESS_FILENAME_FORMAT` that would resolve to
 'none' to be omitted from the resulting filename. This also holds
-true for directory names. See [File name handling](advanced_usage.md#empty-placeholders) for
+true for directory names. See [File name handling](advanced_usage.md#file-name-handling) for
 details.
 
     Defaults to `false` which disables this feature.
@@ -290,12 +279,6 @@ this folder is no longer needed and can be removed manually.
 
 Defaults to `/usr/share/nltk_data`
 
-#### [`PAPERLESS_MODEL_FILE=<path>`](#PAPERLESS_MODEL_FILE) {#PAPERLESS_MODEL_FILE}
-
-: This is where paperless will store the classification model.
-
-    Defaults to `PAPERLESS_DATA_DIR/classification_model.pickle`.
-
 ## Logging
 
 #### [`PAPERLESS_LOGROTATE_MAX_SIZE=<num>`](#PAPERLESS_LOGROTATE_MAX_SIZE) {#PAPERLESS_LOGROTATE_MAX_SIZE}
@@ -462,32 +445,19 @@ applications.
 
         This will allow authentication by simply adding a
         `Remote-User: <username>` header to a request. Use with care! You
-        especially *must* ensure that any such header is not passed from
-        external requests to your reverse-proxy to paperless (that would
-        effectively bypass all authentication).
+        especially *must:   ensure that any such header is not passed from
+        your proxy server to paperless.
 
-        If you're exposing paperless to the internet directly (i.e.
-        without a reverse proxy), do not use this.
+        If you're exposing paperless to the internet directly, do not use
+        this.
 
         Also see the warning [in the official documentation](https://docs.djangoproject.com/en/4.1/howto/auth-remote-user/#configuration).
 
     Defaults to "false" which disables this feature.
 
-#### [`PAPERLESS_ENABLE_HTTP_REMOTE_USER_API=<bool>`](#PAPERLESS_ENABLE_HTTP_REMOTE_USER_API) {#PAPERLESS_ENABLE_HTTP_REMOTE_USER_API}
-
-: Allows authentication via HTTP_REMOTE_USER directly against the API
-
-    !!! warning
-
-        See the warning above about securing your installation when using remote user header authentication. This setting is separate from
-        `PAPERLESS_ENABLE_HTTP_REMOTE_USER` to avoid introducing a security vulnerability to existing reverse proxy setups. As above,
-        ensure that your reverse proxy does not simply pass the `Remote-User` header from the internet to paperless.
-
-    Defaults to "false" which disables this feature.
-
 #### [`PAPERLESS_HTTP_REMOTE_USER_HEADER_NAME=<str>`](#PAPERLESS_HTTP_REMOTE_USER_HEADER_NAME) {#PAPERLESS_HTTP_REMOTE_USER_HEADER_NAME}
 
-: If "PAPERLESS_ENABLE_HTTP_REMOTE_USER" or `PAPERLESS_ENABLE_HTTP_REMOTE_USER_API` are enabled, this
+: If "PAPERLESS_ENABLE_HTTP_REMOTE_USER" is enabled, this
 property allows to customize the name of the HTTP header from which
 the authenticated username is extracted. Values are in terms of
 [HttpRequest.META](https://docs.djangoproject.com/en/4.1/ref/request-response/#django.http.HttpRequest.META).
@@ -499,9 +469,8 @@ followed by the normalized actual header name.
 #### [`PAPERLESS_LOGOUT_REDIRECT_URL=<str>`](#PAPERLESS_LOGOUT_REDIRECT_URL) {#PAPERLESS_LOGOUT_REDIRECT_URL}
 
 : URL to redirect the user to after a logout. This can be used
-together with PAPERLESS_ENABLE_HTTP_REMOTE_USER and SSO to
-redirect the user back to the SSO application's logout page to
-complete the logout process.
+together with PAPERLESS_ENABLE_HTTP_REMOTE_USER to
+redirect the user back to the SSO application's logout page.
 
     Defaults to None, which disables this feature.
 
@@ -545,72 +514,6 @@ This is for use with self-signed certificates against local IMAP servers.
     Settings this value has security implications for the security of your email.
     Understand what it does and be sure you need to before setting.
 
-#### [`PAPERLESS_SOCIALACCOUNT_PROVIDERS=<json>`](#PAPERLESS_SOCIALACCOUNT_PROVIDERS) {#PAPERLESS_SOCIALACCOUNT_PROVIDERS}
-
-: This variable is used to setup login and signup via social account providers which are compatible with django-allauth.
-See the corresponding [django-allauth documentation](https://docs.allauth.org/en/latest/socialaccount/providers/index.html)
-for a list of provider configurations. You will also need to include the relevant Django 'application' inside the
-[PAPERLESS_APPS](#PAPERLESS_APPS) setting to activate that specific authentication provider (e.g. `allauth.socialaccount.providers.openid_connect` for the [OIDC Connect provider](https://docs.allauth.org/en/latest/socialaccount/providers/openid_connect.html)).
-
-    Defaults to None, which does not enable any third party authentication systems.
-
-#### [`PAPERLESS_SOCIAL_AUTO_SIGNUP=<bool>`](#PAPERLESS_SOCIAL_AUTO_SIGNUP) {#PAPERLESS_SOCIAL_AUTO_SIGNUP}
-
-: Attempt to signup the user using retrieved email, username etc from the third party authentication
-system. See the corresponding
-[django-allauth documentation](https://docs.allauth.org/en/latest/socialaccount/configuration.html)
-
-    Defaults to False
-
-#### [`PAPERLESS_SOCIALACCOUNT_ALLOW_SIGNUPS=<bool>`](#PAPERLESS_SOCIALACCOUNT_ALLOW_SIGNUPS) {#PAPERLESS_SOCIALACCOUNT_ALLOW_SIGNUPS}
-
-: Allow users to signup for a new Paperless-ngx account using any setup third party authentication systems.
-
-    Defaults to True
-
-#### [`PAPERLESS_ACCOUNT_ALLOW_SIGNUPS=<bool>`](#PAPERLESS_ACCOUNT_ALLOW_SIGNUPS) {#PAPERLESS_ACCOUNT_ALLOW_SIGNUPS}
-
-: Allow users to signup for a new Paperless-ngx account.
-
-    Defaults to False
-
-#### [`PAPERLESS_ACCOUNT_DEFAULT_HTTP_PROTOCOL=<string>`](#PAPERLESS_ACCOUNT_DEFAULT_HTTP_PROTOCOL) {#PAPERLESS_ACCOUNT_DEFAULT_HTTP_PROTOCOL}
-
-: The protocol used when generating URLs, e.g. login callback URLs. See the corresponding
-[django-allauth documentation](https://docs.allauth.org/en/latest/account/configuration.html)
-
-    Defaults to 'https'
-
-#### [`PAPERLESS_ACCOUNT_EMAIL_VERIFICATION=<string>`](#PAPERLESS_ACCOUNT_EMAIL_VERIFICATION) {#PAPERLESS_ACCOUNT_EMAIL_VERIFICATION}
-
-: Determines whether email addresses are verified during signup (as performed by Django allauth). See the relevant
-[paperless settings](#PAPERLESS_EMAIL_HOST) and [the allauth docs](https://docs.allauth.org/en/latest/account/configuration.html)
-
-    Defaults to 'optional'
-
-!!! note
-
-    If you do not have a working email server set up you should set this to 'none'.
-
-#### [`PAPERLESS_DISABLE_REGULAR_LOGIN=<bool>`](#PAPERLESS_DISABLE_REGULAR_LOGIN) {#PAPERLESS_DISABLE_REGULAR_LOGIN}
-
-: Disables the regular frontend username / password login, i.e. once you have setup SSO. Note that this setting does not disable the Django admin login nor logging in with local credentials via the API. To prevent access to the Django admin, consider blocking `/admin/` in your [web server or reverse proxy configuration](https://github.com/paperless-ngx/paperless-ngx/wiki/Using-a-Reverse-Proxy-with-Paperless-ngx).
-
-You can optionally also automatically redirect users to the SSO login with [PAPERLESS_REDIRECT_LOGIN_TO_SSO](#PAPERLESS_REDIRECT_LOGIN_TO_SSO)
-
-    Defaults to False
-
-#### [`PAPERLESS_REDIRECT_LOGIN_TO_SSO=<bool>`](#PAPERLESS_REDIRECT_LOGIN_TO_SSO) {#PAPERLESS_REDIRECT_LOGIN_TO_SSO}
-
-: When this setting is enabled users will automatically be redirected (using javascript) to the first SSO provider login. You may still want to disable the frontend login form for clarity.
-
-    Defaults to False
-
-#### [`PAPERLESS_ACCOUNT_SESSION_REMEMBER=<bool>`](#PAPERLESS_ACCOUNT_SESSION_REMEMBER) {#PAPERLESS_ACCOUNT_SESSION_REMEMBER}
-
-: See the corresponding
-[django-allauth documentation](https://docs.allauth.org/en/latest/account/configuration.html)
-
 ## OCR settings {#ocr}
 
 Paperless uses [OCRmyPDF](https://ocrmypdf.readthedocs.io/en/latest/)
@@ -632,8 +535,6 @@ parsing documents.
     Keep in mind that Tesseract uses much more CPU time with multiple
     languages enabled.
 
-    If you are including languages that are not installed by default, you will need to also set [`PAPERLESS_OCR_LANGUAGES`](configuration.md#PAPERLESS_OCR_LANGUAGES) for docker deployments or install the tesseract language packages manually for bare metal installations.
-
     Defaults to "eng".
 
     !!! note
@@ -757,13 +658,11 @@ completely.
 
     Specifying 1 here will only use the first page.
 
-    The value must be greater than or equal to 1 to be used.
-
     When combined with `PAPERLESS_OCR_MODE=redo` or
     `PAPERLESS_OCR_MODE=force`, paperless will not modify any text it
     finds on excluded pages and copy it verbatim.
 
-    Defaults to unset, which disables this feature and always uses all
+    Defaults to 0, which disables this feature and always uses all
     pages.
 
 #### [`PAPERLESS_OCR_IMAGE_DPI=<num>`](#PAPERLESS_OCR_IMAGE_DPI) {#PAPERLESS_OCR_IMAGE_DPI}
@@ -777,7 +676,7 @@ fails, it uses this value as a fallback.
 
     Set this to the DPI your scanner produces images at.
 
-    Defaults to unset, which will automatically calculate image DPI so
+    Default is none, which will automatically calculate image DPI so
     that the produced PDF documents are A4 sized.
 
 #### [`PAPERLESS_OCR_MAX_IMAGE_PIXELS=<num>`](#PAPERLESS_OCR_MAX_IMAGE_PIXELS) {#PAPERLESS_OCR_MAX_IMAGE_PIXELS}
@@ -790,8 +689,6 @@ but could result in missing text content.
     If unset, will default to the value determined by
     [Pillow](https://pillow.readthedocs.io/en/stable/reference/Image.html#PIL.Image.MAX_IMAGE_PIXELS).
 
-    Setting this value to 0 will entirely disable the limit.  See the below warning.
-
     !!! note
 
         Increasing this limit could cause Paperless to consume additional
@@ -801,24 +698,10 @@ but could result in missing text content.
     !!! warning
 
         The limit is intended to prevent malicious files from consuming
-        system resources and causing crashes and other errors. Only change
+        system resources and causing crashes and other errors. Only increase
         this value if you are certain your documents are not malicious and
         you need the text which was not OCRed
 
-#### [`PAPERLESS_OCR_COLOR_CONVERSION_STRATEGY=<RGB>`](#PAPERLESS_OCR_COLOR_CONVERSION_STRATEGY) {#PAPERLESS_OCR_COLOR_CONVERSION_STRATEGY}
-
-: Controls the Ghostscript color conversion strategy when creating the archive file. This setting
-will only be utilized if the output is a version of PDF/A.
-
-    Valid options are CMYK, Gray, LeaveColorUnchanged, RGB or UseDeviceIndependentColor.
-
-    You can find more on the settings [here](https://ghostscript.readthedocs.io/en/latest/VectorDevices.html#color-conversion-and-management) in the Ghostscript documentation.
-
-    !!! warning
-
-        Utilizing some of the options may result in errors when creating archive
-        files from PDFs.
-
 #### [`PAPERLESS_OCR_USER_ARGS=<json>`](#PAPERLESS_OCR_USER_ARGS) {#PAPERLESS_OCR_USER_ARGS}
 
 : OCRmyPDF offers many more options. Use this parameter to specify any
@@ -834,7 +717,7 @@ they use underscores instead of dashes.
         Paperless has been tested to work with the OCR options provided
         above. There are many options that are incompatible with each other,
         so specifying invalid options may prevent paperless from consuming
-        any documents.  Use with caution!
+        any documents.
 
     Specify arguments as a JSON dictionary. Keep note of lower case
     booleans and double quoted parameter names and strings. Examples:
@@ -985,28 +868,6 @@ documents.
 
     Default is none, which disables the temporary directory.
 
-#### [`PAPERLESS_APPS=<string>`](#PAPERLESS_APPS) {#PAPERLESS_APPS}
-
-: A comma-separated list of Django apps to be included in Django's
-[`INSTALLED_APPS`](https://docs.djangoproject.com/en/5.0/ref/applications/). This setting should
-be used with caution!
-
-    Defaults to None, which does not add any additional apps.
-
-#### [`PAPERLESS_MAX_IMAGE_PIXELS=<number>`](#PAPERLESS_MAX_IMAGE_PIXELS) {#PAPERLESS_MAX_IMAGE_PIXELS}
-
-: Configures the maximum size of an image PIL will allow to load without warning or error.
-
-: If unset, will default to the value determined by
-[Pillow](https://pillow.readthedocs.io/en/stable/reference/Image.html#PIL.Image.MAX_IMAGE_PIXELS).
-
-    Defaults to None, which does change the limit
-
-    !!! warning
-
-        This limit is designed to prevent denial of service from malicious files.
-        It should only be raised or disabled in certain circumstances and with great care.
-
 ## Document Consumption {#consume_config}
 
 #### [`PAPERLESS_CONSUMER_DELETE_DUPLICATES=<bool>`](#PAPERLESS_CONSUMER_DELETE_DUPLICATES) {#PAPERLESS_CONSUMER_DELETE_DUPLICATES}
@@ -1054,7 +915,7 @@ or hidden folders some tools use to store data.
     `._foo.pdf` and `._bar/foo.pdf`
 
     Defaults to
-    `[".DS_Store", ".DS_STORE", "._*", ".stfolder/*", ".stversions/*", ".localized/*", "desktop.ini", "@eaDir/*", "Thumbs.db"]`.
+    `[".DS_STORE/*", "._*", ".stfolder/*", ".stversions/*", ".localized/*", "desktop.ini", "@eaDir/*"]`.
 
 #### [`PAPERLESS_CONSUMER_BARCODE_SCANNER=<string>`](#PAPERLESS_CONSUMER_BARCODE_SCANNER) {#PAPERLESS_CONSUMER_BARCODE_SCANNER}
 
@@ -1104,7 +965,7 @@ document text will be checked as normal.
 
 : Paperless searches an entire document for dates. The first date
 found will be used as the initial value for the created date. When
-this variable is greater than 0 (or left to its default value),
+this variable is greater than 0 (or left to it's default value),
 paperless will also suggest other dates found in the document, up to
 a maximum of this setting. Note that duplicates will be removed,
 which can result in fewer dates displayed in the frontend than this
@@ -1129,11 +990,11 @@ This font can be changed here.
 
 #### [`PAPERLESS_IGNORE_DATES=<string>`](#PAPERLESS_IGNORE_DATES) {#PAPERLESS_IGNORE_DATES}
 
-: Paperless parses a document's creation date from filename and file
+: Paperless parses a documents creation date from filename and file
 content. You may specify a comma separated list of dates that should
 be ignored during this process. This is useful for special dates
 (like date of birth) that appear in documents regularly but are very
-unlikely to be the document's creation date.
+unlikely to be the documents creation date.
 
     The date is parsed using the order specified in PAPERLESS_DATE_ORDER
 
@@ -1165,10 +1026,8 @@ system changes with `inotify`.
 
 #### [`PAPERLESS_CONSUMER_POLLING_RETRY_COUNT=<num>`](#PAPERLESS_CONSUMER_POLLING_RETRY_COUNT) {#PAPERLESS_CONSUMER_POLLING_RETRY_COUNT}
 
-: If consumer polling is enabled, sets the maximum number of times
-paperless will check for a file to remain unmodified. If a file's
-modification time and size are identical for two consecutive checks, it
-will be consumed.
+: If consumer polling is enabled, sets the number of times paperless
+will check for a file to remain unmodified.
 
     Defaults to 5.
 
@@ -1260,7 +1119,7 @@ barcode.
 
 : Defines the upscale factor used in barcode detection.
 Improves the detection of small barcodes, i.e. with a value of 1.5 by
-upscaling the document before the detection process. Upscaling will
+upscaling the document beforce the detection process. Upscaling will
 only take place if value is bigger than 1.0. Otherwise upscaling will
 not be performed to save resources. Try using in combination with
 PAPERLESS_CONSUMER_BARCODE_DPI set to a value higher than default.
@@ -1277,62 +1136,14 @@ combination with PAPERLESS_CONSUMER_BARCODE_UPSCALE bigger than 1.0.
 
     Defaults to "300"
 
-#### [`PAPERLESS_CONSUMER_ENABLE_TAG_BARCODE=<bool>`](#PAPERLESS_CONSUMER_ENABLE_TAG_BARCODE) {#PAPERLESS_CONSUMER_ENABLE_TAG_BARCODE}
-
-: Enables the detection of barcodes in the scanned document and
-assigns or creates tags if a properly formatted barcode is detected.
-
-    The barcode must match one of the (configurable) regular expressions.
-    If the barcode text contains ',' (comma), it is split into multiple
-    barcodes which are individually processed for tagging.
-
-    Matching is case insensitive.
-
-    Defaults to false.
-
-#### [`PAPERLESS_CONSUMER_TAG_BARCODE_MAPPING=<json dict>`](#PAPERLESS_CONSUMER_TAG_BARCODE_MAPPING) {#PAPERLESS_CONSUMER_TAG_BARCODE_MAPPING}
-
-: Defines a dictionary of filter regex and substitute expressions.
-
-    Syntax: `{"<regex>": "<substitute>" [,...]]}`
-
-    A barcode is considered for tagging if the barcode text matches
-    at least one of the provided <regex> pattern.
-
-    If a match is found, the <substitute> rule is applied. This allows very
-    versatile reformatting and mapping of barcode pattern to tag values.
-
-    If a tag is not found it will be created.
-
-    Defaults to:
-
-    `{"TAG:(.*)": "\\g<1>"}` which defines
-    - a regex TAG:(.*) which includes barcodes beginning with TAG:
-      followed by any text that gets stored into match group #1 and
-    - a substitute `\\g<1>` that replaces the original barcode text
-      by the content in match group #1.
-    Consequently, the tag is the barcode text without its TAG: prefix.
-
-    More examples:
-
-    `{"ASN12.*": "JOHN", "ASN13.*": "SMITH"}` for example maps
-    - ASN12nnnn barcodes to the tag JOHN and
-    - ASN13nnnn barcodes to the tag SMITH.
-
-    `{"T-J": "JOHN", "T-S": "SMITH", "T-D": "DOE"}` directly maps
-    - T-J barcodes to the tag JOHN,
-    - T-S barcodes to the tag SMITH and
-    - T-D barcodes to the tag DOE.
-
-    Please refer to the Python regex documentation for more information.
-
 ## Audit Trail
 
-#### [`PAPERLESS_AUDIT_LOG_ENABLED=<bool>`](#PAPERLESS_AUDIT_LOG_ENABLED) {#PAPERLESS_AUDIT_LOG_ENABLED}
+#### [`PAPERLESS_AUDIT_LOG_ENABLED=<bool>`](#PAPERLESS_AUDIT_LOG_ENABLED){#PAPERLESS_AUDIT_LOG_ENABLED}
 
-: Enables the audit trail for documents, document types, correspondents, and tags.
+: Enables an audit trail for documents, document types, correspondents, and tags. Log entries can be viewed in the Django backend only.
 
-    Defaults to true.
+    !!! warning
+    Once enabled cannot be disabled
 
 ## Collate Double-Sided Documents {#collate}
 
@@ -1372,20 +1183,6 @@ processing. This only has an effect if
 
     Defaults to false.
 
-## Trash
-
-#### [`PAPERLESS_EMPTY_TRASH_DELAY=<num>`](#PAPERLESS_EMPTY_TRASH_DELAY) {#PAPERLESS_EMPTY_TRASH_DELAY}
-
-: Sets how long in days documents remain in the 'trash' before they are permanently deleted.
-
-    Defaults to 30 days, minimum of 1 day.
-
-#### [`PAPERLESS_EMPTY_TRASH_TASK_CRON=<cron expression>`](#PAPERLESS_EMPTY_TRASH_TASK_CRON) {#PAPERLESS_EMPTY_TRASH_TASK_CRON}
-
-: Configures the schedule to empty the trash of expired deleted documents.
-
-    Defaults to `0 1 * * *`, once per day.
-
 ## Binaries
 
 There are a few external software packages that Paperless expects to
@@ -1485,7 +1282,7 @@ specified as "chi-tra".
     PAPERLESS_OCR_LANGUAGES=tur ces chi-tra
     ```
 
-    Make sure it's a space-separated list when using several values.
+    Make sure it's a space separated list when using several values.
 
     To actually use these languages, also set the default OCR language
     of paperless:
@@ -1496,10 +1293,6 @@ specified as "chi-tra".
 
     Defaults to none, which does not install any additional languages.
 
-    !!! warning
-
-         This option must not be used in rootless containers.
-
 #### [`PAPERLESS_ENABLE_FLOWER=<defined>`](#PAPERLESS_ENABLE_FLOWER) {#PAPERLESS_ENABLE_FLOWER}
 
 : If this environment variable is defined, the Celery monitoring tool
@@ -1508,21 +1301,7 @@ started by the container.
 
     You can read more about this in the [advanced documentation](advanced_usage.md#celery-monitoring).
 
-#### [`PAPERLESS_SUPERVISORD_WORKING_DIR=<defined>`](#PAPERLESS_SUPERVISORD_WORKING_DIR) {#PAPERLESS_SUPERVISORD_WORKING_DIR}
-
-: If this environment variable is defined, the `supervisord.log` and `supervisord.pid` file will be created under the specified path in `PAPERLESS_SUPERVISORD_WORKING_DIR`. Setting `PAPERLESS_SUPERVISORD_WORKING_DIR=/tmp` and `PYTHONPYCACHEPREFIX=/tmp/pycache` would allow paperless to work on a read-only filesystem.
-
-    Please take note that the `PAPERLESS_DATA_DIR` and `PAPERLESS_MEDIA_ROOT` paths still have to be writable, just like the `PAPERLESS_SUPERVISORD_WORKING_DIR`. The can be archived by using bind or volume mounts. Only works in the container is run as user *paperless*
-
-## Frontend Settings
-
-#### [`PAPERLESS_APP_TITLE=<str>`](#PAPERLESS_APP_TITLE) {#PAPERLESS_APP_TITLE}
-
-: If set, overrides the default name "Paperless-ngx"
-
-#### [`PAPERLESS_APP_LOGO=<path>`](#PAPERLESS_APP_LOGO) {#PAPERLESS_APP_LOGO}
-
-: Path to an image file in the /media/logo directory, must include 'logo', e.g. `/logo/Atari_logo.svg`
+## Update Checking {#update-checking}
 
 #### [`PAPERLESS_ENABLE_UPDATE_CHECK=<bool>`](#PAPERLESS_ENABLE_UPDATE_CHECK) {#PAPERLESS_ENABLE_UPDATE_CHECK}
 
@@ -1550,10 +1329,6 @@ password. All of these options come from their similarly-named [Django settings]
 
 : Defaults to ''.
 
-#### [`PAPERLESS_EMAIL_FROM=<str>`](#PAPERLESS_EMAIL_FROM) {#PAPERLESS_EMAIL_FROM}
-
-: Defaults to PAPERLESS_EMAIL_HOST_USER if not set.
-
 #### [`PAPERLESS_EMAIL_HOST_PASSWORD=<str>`](#PAPERLESS_EMAIL_HOST_PASSWORD) {#PAPERLESS_EMAIL_HOST_PASSWORD}
 
 : Defaults to ''.

docs/development.md

@@ -9,7 +9,7 @@ following way:
 - `main` always represents the latest release and will only see
   changes when a new release is made.
 - `dev` contains the code that will be in the next release.
-- `feature-X` contains bigger changes that will be in some release, but
+- `feature-X` contain bigger changes that will be in some release, but
   not necessarily the next one.
 
 When making functional changes to Paperless-ngx, _always_ make your changes
@@ -47,7 +47,7 @@ early on.
 Once installed, hooks will run when you commit. If the formatting isn't
 quite right or a linter catches something, the commit will be rejected.
 You'll need to look at the output and fix the issue. Some hooks, such
-as the Python linting and formatting tool `ruff`, will format failing
+as the Python formatting tool `black`, will format failing
 files, so all you need to do is `git add` those files again
 and retry your commit.
 
@@ -81,6 +81,10 @@ first-time setup.
     !!! note
 
         Using a virtual environment is highly recommended. You can spawn one via `pipenv shell`.
+        Make sure you're using Python 3.10.x or lower. Otherwise you might
+        get issues with building dependencies. You can use
+        [pyenv](https://github.com/pyenv/pyenv) to install a specific
+        Python version.
 
 5.  Install pre-commit hooks:
 
@@ -273,17 +277,27 @@ Adding new languages requires adding the translated files in the
     }
     ```
 
-2.  Add the language to the `LANGUAGE_OPTIONS` array in
+2.  Add the language to the available options in
     `src-ui/src/app/services/settings.service.ts`:
 
+    ```typescript
+    getLanguageOptions(): LanguageOption[] {
+        return [
+            {code: "en-us", name: $localize`English (US)`, englishName: "English (US)", dateInputFormat: "mm/dd/yyyy"},
+            {code: "en-gb", name: $localize`English (GB)`, englishName: "English (GB)", dateInputFormat: "dd/mm/yyyy"},
+            {code: "de", name: $localize`German`, englishName: "German", dateInputFormat: "dd.mm.yyyy"},
+            {code: "nl", name: $localize`Dutch`, englishName: "Dutch", dateInputFormat: "dd-mm-yyyy"},
+            {code: "fr", name: $localize`French`, englishName: "French", dateInputFormat: "dd/mm/yyyy"},
+            {code: "pt-br", name: $localize`Portuguese (Brazil)`, englishName: "Portuguese (Brazil)", dateInputFormat: "dd/mm/yyyy"}
+            // Add your new language here
+        ]
+    }
     ```
 
     `dateInputFormat` is a special string that defines the behavior of
     the date input fields and absolutely needs to contain "dd", "mm"
     and "yyyy".
 
-    ```
-
 3.  Import and register the Angular data for this locale in
     `src-ui/src/app/app.module.ts`:
 

docs/faq.md

@@ -83,11 +83,11 @@ has to do much less work to serve the data.
 ## _How do I install paperless-ngx on Raspberry Pi?_
 
 **A:** Docker images are available for arm64 hardware, so just
-follow the [Docker Compose instructions](https://docs.paperless-ngx.com/setup/#installation). Apart from more required disk
+follow the [docker-compose instructions](https://docs.paperless-ngx.com/setup/#installation). Apart from more required disk
 space compared to a bare metal installation, docker comes with close to
 zero overhead, even on Raspberry Pi.
 
-If you decide to go with the bare metal route, be aware that some of
+If you decide to got with the bare metal route, be aware that some of
 the python requirements do not have precompiled packages for ARM /
 ARM64. Installation of these will require additional development
 libraries and compilation will take a long time.

docs/index.md

@@ -8,13 +8,6 @@ physical documents into a searchable online archive so you can keep, well, _less
 [Get started](setup.md){ .md-button .md-button--primary .index-callout }
 [Demo](https://demo.paperless-ngx.com){ .md-button .md-button--secondary target=\_blank }
 
-<div style="display: flex; justify-content: end; margin-top: -1.5rem;">
-  <a href="https://m.do.co/c/8d70b916d462" target="_blank">
-    <img src="https://opensource.nyc3.cdn.digitaloceanspaces.com/attribution/assets/PoweredByDO/DO_Powered_by_Badge_white.svg#only-dark" class="no-lightbox" width="150px">
-    <img src="https://opensource.nyc3.cdn.digitaloceanspaces.com/attribution/assets/PoweredByDO/DO_Powered_by_Badge_black.svg#only-light" class="no-lightbox" width="150px">
-  </a>
-</div>
-
 </div>
 <div class="grid-right" markdown>
 ![image](assets/screenshots/documents-smallcards.png#only-light){.index-screenshot}
@@ -25,10 +18,7 @@ physical documents into a searchable online archive so you can keep, well, _less
 ## Features
 
 -   **Organize and index** your scanned documents with tags, correspondents, types, and more.
--   _Your_ data is stored locally on _your_ server and is never transmitted or shared in any way.
--   Performs **OCR** on your documents, adding searchable and selectable text, even to documents scanned with only images.
--   Utilizes the open-source Tesseract engine to recognize more than 100 languages.
--   Documents are saved as PDF/A format which is designed for long term storage, alongside the unaltered originals.
+-   Performs **OCR** on your documents, adding selectable text to image-only documents.
 -   Uses machine-learning to automatically add tags, correspondents and document types to your documents.
 -   Supports PDF documents, images, plain text files, Office documents (Word, Excel, Powerpoint, and LibreOffice equivalents)[^1] and more.
 -   Paperless stores your documents plain on disk. Filenames and folders are managed by paperless and their format can be configured freely with different configurations assigned to different documents.
@@ -49,7 +39,7 @@ physical documents into a searchable online archive so you can keep, well, _less
     -   Configure multiple accounts and rules for each account.
     -   After processing, paperless can perform actions on the messages such as marking as read, deleting and more.
 -   A built-in robust **multi-user permissions** system that supports 'global' permissions as well as per document or object.
--   A powerful workflow system that gives you even more control.
+-   A powerful templating system that gives you more control over the consumption pipeline.
 -   **Optimized** for multi core systems: Paperless-ngx consumes multiple documents in parallel.
 -   The integrated sanity checker makes sure that your document archive is in good health.
 
@@ -164,9 +154,9 @@ Tag, correspondent, document type and storage path editing.
 
 </div>
 <div class="grid-half-right" markdown>
-  Workflows provide finer control over the document pipeline and trigger actions.
+  Consumption templates provide finer control over the document pipeline.
 
-![image](assets/screenshots/workflow.png)
+![image](assets/screenshots/consumption_template.png)
 
 </div>
 <div class="clear"></div>

docs/setup.md

@@ -6,7 +6,6 @@ You can go multiple routes to setup and run Paperless:
 - [Pull the image from Docker Hub](#docker_hub)
 - [Build the Docker image yourself](#docker_build)
 - [Install Paperless directly on your system manually (bare metal)](#bare_metal)
-- A user-maintained list of commercial hosting providers can be found [in the wiki](https://github.com/paperless-ngx/paperless-ngx/wiki/Related-Projects)
 
 The Docker routes are quick & easy. These are the recommended routes.
 This configures all the stuff from the above automatically so that it
@@ -26,11 +25,7 @@ necessary configuration files, pull the docker image, start paperless
 and create your user account. This script essentially performs all the
 steps described in [Docker setup](#docker_hub) automatically.
 
-1.  Make sure that Docker and Docker Compose are installed.
-
-    !!! tip
-
-        See the Docker installation instructions at https://docs.docker.com/engine/install/
+1.  Make sure that docker and docker-compose are installed.
 
 2.  Download and run the installation script:
 
@@ -67,19 +62,19 @@ steps described in [Docker setup](#docker_hub) automatically.
         For new installations, it is recommended to use PostgreSQL as the
         database backend.
 
-3.  Install [Docker](https://docs.docker.com/engine/install/) and
-    [Docker Compose](https://docs.docker.com/compose/install/).
+3.  Install [Docker](https://www.docker.com/) and
+    [docker-compose](https://docs.docker.com/compose/install/).
 
     !!! warning
 
         If you want to use the included `docker-compose.*.yml` file, you
-        need to have at least Docker version **17.09.0** and Docker Compose
-        version **v2**. To check do: `docker compose version` or `docker -v`
+        need to have at least Docker version **17.09.0** and docker-compose
+        version **1.17.0**. To check do: `docker-compose -v` or `docker -v`
 
         See the [Docker installation guide](https://docs.docker.com/engine/install/) on how to install the current
         version of Docker for your operating system or Linux distribution of
-        choice. To get the latest version of Docker Compose, follow the
-        [Docker Compose installation guide](https://docs.docker.com/compose/install/linux/) if your package repository
+        choice. To get the latest version of docker-compose, follow the
+        [docker-compose installation guide](https://docs.docker.com/compose/install/linux/) if your package repository
         doesn't include it.
 
 4.  Modify `docker-compose.yml` to your preferences. You may want to
@@ -97,7 +92,7 @@ steps described in [Docker setup](#docker_hub) automatically.
     - /home/jonaswinkler/paperless-inbox:/usr/src/paperless/consume
     ```
 
-    Don't change the part after the colon or paperless won't find your
+    Don't change the part after the colon or paperless wont find your
     documents.
 
     You may also need to change the default port that the webserver will
@@ -122,10 +117,6 @@ steps described in [Docker setup](#docker_hub) automatically.
 
     **Rootless**
 
-    !!! warning
-
-        It is currently not possible to run the container rootless if additional languages are specified via `PAPERLESS_OCR_LANGUAGES`.
-
     If you want to run Paperless as a rootless container, you will need
     to do the following in your `docker-compose.yml`:
 
@@ -174,13 +165,13 @@ steps described in [Docker setup](#docker_hub) automatically.
         [`PAPERLESS_CONSUMER_POLLING`](configuration.md#PAPERLESS_CONSUMER_POLLING), which will disable inotify. See
         [here](configuration.md#polling).
 
-6.  Run `docker compose pull`. This will pull the image.
+6.  Run `docker-compose pull`. This will pull the image.
 
 7.  To be able to login, you will need a super user. To create it,
     execute the following command:
 
     ```shell-session
-    $ docker compose run --rm webserver createsuperuser
+    $ docker-compose run --rm webserver createsuperuser
     ```
 
     or using docker exec from within the container:
@@ -192,7 +183,7 @@ steps described in [Docker setup](#docker_hub) automatically.
     This will prompt you to set a username, an optional e-mail address
     and finally a password (at least 8 characters).
 
-8.  Run `docker compose up -d`. This will create and start the necessary containers.
+8.  Run `docker-compose up -d`. This will create and start the necessary containers.
 
 9.  The default `docker-compose.yml` exports the webserver on your local
     port
@@ -218,14 +209,14 @@ steps described in [Docker setup](#docker_hub) automatically.
     root as well.
 
 3.  In the `docker-compose.yml` file, find the line that instructs
-    Docker Compose to pull the paperless image from Docker Hub:
+    docker-compose to pull the paperless image from Docker Hub:
 
     ```yaml
     webserver:
       image: ghcr.io/paperless-ngx/paperless-ngx:latest
     ```
 
-    and replace it with a line that instructs Docker Compose to build
+    and replace it with a line that instructs docker-compose to build
     the image from the current working directory instead:
 
     ```yaml
@@ -235,10 +226,10 @@ steps described in [Docker setup](#docker_hub) automatically.
     ```
 
 4.  Follow steps 3 to 8 of [Docker Setup](#docker_hub). When asked to run
-    `docker compose pull` to pull the image, do
+    `docker-compose pull` to pull the image, do
 
     ```shell-session
-    $ docker compose build
+    $ docker-compose build
     ```
 
     instead to build the image.
@@ -250,14 +241,9 @@ a minimal installation of Debian/Buster, which is the current stable
 release at the time of writing. Windows is not and will never be
 supported.
 
-Paperless requires Python 3. At this time, 3.9 - 3.11 are tested versions.
-Newer versions may work, but some dependencies may not fully support newer versions.
-Support for older Python versions may be dropped as they reach end of life or as newer versions
-are released, dependency support is confirmed, etc.
-
 1.  Install dependencies. Paperless requires the following packages.
 
-    - `python3`
+    - `python3` - 3.9 - 3.11 are supported
     - `python3-pip`
     - `python3-dev`
     - `default-libmysqlclient-dev` for MariaDB
@@ -305,17 +291,8 @@ are released, dependency support is confirmed, etc.
     - `libatlas-base-dev`
     - `libxslt1-dev`
 
-    You will also need these for installing some of the python dependencies:
-
-    - `build-essential`
-    - `python3-setuptools`
-    - `python3-wheel`
-
-    Use this list for your preferred package management:
-
-    ```
-    build-essential python3-setuptools python3-wheel
-    ```
+    You will also need `build-essential`, `python3-setuptools` and
+    `python3-wheel` for installing some of the python dependencies.
 
 2.  Install `redis` >= 6.0 and configure it to start automatically.
 
@@ -415,7 +392,8 @@ are released, dependency support is confirmed, etc.
     sudo chown paperless:paperless /opt/paperless/consume
     ```
 
-8.  Install python requirements from the `requirements.txt` file.
+8.  Install python requirements from the `requirements.txt` file. It is
+    up to you if you wish to use a virtual environment or not. First you should update your pip, so it gets the actual packages.
 
     ```shell-session
     sudo -Hu paperless pip3 install -r requirements.txt
@@ -424,12 +402,6 @@ are released, dependency support is confirmed, etc.
     This will install all python dependencies in the home directory of
     the new paperless user.
 
-    !!! tip
-
-        It is up to you if you wish to use a virtual environment or not for the Python
-        dependencies.  This is an alternative to the above and may require adjusting
-        the example scripts to utilize the virtual environment paths
-
 9.  Go to `/opt/paperless/src`, and execute the following commands:
 
     ```bash
@@ -540,7 +512,8 @@ are released, dependency support is confirmed, etc.
 15. Optional: If using the NLTK machine learning processing (see
     [`PAPERLESS_ENABLE_NLTK`](configuration.md#PAPERLESS_ENABLE_NLTK) for details),
     download the NLTK data for the Snowball
-    Stemmer, Stopwords and Punkt tokenizer to `/usr/share/nltk_data`. Refer to the [NLTK
+    Stemmer, Stopwords and Punkt tokenizer to your
+    `PAPERLESS_DATA_DIR/nltk`. Refer to the [NLTK
     instructions](https://www.nltk.org/data.html) for details on how to
     download the data.
 
@@ -568,7 +541,7 @@ to
 image: ghcr.io/paperless-ngx/paperless-ngx:latest
 ```
 
-and then run `docker compose up -d` which will pull the new image
+and then run `docker-compose up -d` which will pull the new image
 recreate the container. That's it!
 
 Users who installed with the bare-metal route should also update their
@@ -597,7 +570,7 @@ installation. The important things to keep in mind are as follows:
 - The task scheduler of paperless, which is used to execute periodic
   tasks such as email checking and maintenance, requires a
   [redis](https://redis.io/) message broker instance. The
-  Docker Compose route takes care of that.
+  docker-compose route takes care of that.
 - The layout of the folder structure for your documents and data
   remains the same, so you can just plug your old docker volumes into
   paperless-ngx and expect it to find everything where it should be.
@@ -608,7 +581,7 @@ Migration to paperless-ngx is then performed in a few simple steps:
 
     ```bash
     $ cd /path/to/current/paperless
-    $ docker compose down
+    $ docker-compose down
     ```
 
 2.  Do a backup for two purposes: If something goes wrong, you still
@@ -616,7 +589,7 @@ Migration to paperless-ngx is then performed in a few simple steps:
     switch back to paperless.
 
 3.  Download the latest release of paperless-ngx. You can either go with
-    the Docker Compose files from
+    the docker-compose files from
     [here](https://github.com/paperless-ngx/paperless-ngx/tree/main/docker/compose)
     or clone the repository to build the image yourself (see
     [above](#docker_build)). You can
@@ -653,7 +626,7 @@ Migration to paperless-ngx is then performed in a few simple steps:
     the search index:
 
     ```shell-session
-    $ docker compose run --rm webserver document_index reindex
+    $ docker-compose run --rm webserver document_index reindex
     ```
 
     This will migrate your database and create the search index. After
@@ -662,7 +635,7 @@ Migration to paperless-ngx is then performed in a few simple steps:
 8.  Start paperless-ngx.
 
     ```bash
-    $ docker compose up -d
+    $ docker-compose up -d
     ```
 
     This will run paperless in the background and automatically start it
@@ -685,46 +658,120 @@ commands as well.
 1.  Stop and remove the paperless container
 2.  If using an external database, stop the container
 3.  Update Redis configuration
-
-    1. If `REDIS_URL` is already set, change it to [`PAPERLESS_REDIS`](configuration.md#PAPERLESS_REDIS)
-       and continue to step 4.
-
-    1. Otherwise, in the `docker-compose.yml` add a new service for
-       Redis, following [the example compose
-       files](https://github.com/paperless-ngx/paperless-ngx/tree/main/docker/compose)
-
-    1. Set the environment variable [`PAPERLESS_REDIS`](configuration.md#PAPERLESS_REDIS) so it points to
-       the new Redis container
-
+    a) If `REDIS_URL` is already set, change it to [`PAPERLESS_REDIS`](configuration.md#PAPERLESS_REDIS)
+    and continue to step 4.
+    b) Otherwise, in the `docker-compose.yml` add a new service for
+    Redis, following [the example compose
+    files](https://github.com/paperless-ngx/paperless-ngx/tree/main/docker/compose)
+    c) Set the environment variable [`PAPERLESS_REDIS`](configuration.md#PAPERLESS_REDIS) so it points to
+    the new Redis container
 4.  Update user mapping
-
-    1. If set, change the environment variable `PUID` to `USERMAP_UID`
-
-    1. If set, change the environment variable `PGID` to `USERMAP_GID`
-
+    a) If set, change the environment variable `PUID` to `USERMAP_UID`
+    b) If set, change the environment variable `PGID` to `USERMAP_GID`
 5.  Update configuration paths
-
-    1. Set the environment variable [`PAPERLESS_DATA_DIR`](configuration.md#PAPERLESS_DATA_DIR) to `/config`
-
+    a) Set the environment variable [`PAPERLESS_DATA_DIR`](configuration.md#PAPERLESS_DATA_DIR) to `/config`
 6.  Update media paths
-
-    1. Set the environment variable [`PAPERLESS_MEDIA_ROOT`](configuration.md#PAPERLESS_MEDIA_ROOT) to
-       `/data/media`
-
+    a) Set the environment variable [`PAPERLESS_MEDIA_ROOT`](configuration.md#PAPERLESS_MEDIA_ROOT) to
+    `/data/media`
 7.  Update timezone
-
-    1. Set the environment variable [`PAPERLESS_TIME_ZONE`](configuration.md#PAPERLESS_TIME_ZONE) to the same
-       value as `TZ`
-
+    a) Set the environment variable [`PAPERLESS_TIME_ZONE`](configuration.md#PAPERLESS_TIME_ZONE) to the same
+    value as `TZ`
 8.  Modify the `image:` to point to
     `ghcr.io/paperless-ngx/paperless-ngx:latest` or a specific version
     if preferred.
-9.  Start the containers as before, using `docker compose`.
+9.  Start the containers as before, using `docker-compose`.
 
 ## Moving data from SQLite to PostgreSQL or MySQL/MariaDB {#sqlite_to_psql}
 
-The best way to migrate between database types is to perform an [export](administration.md#exporter) and then
-[import](administration.md#importer) into a clean installation of Paperless-ngx.
+Moving your data from SQLite to PostgreSQL or MySQL/MariaDB is done via
+executing a series of django management commands as below. The commands
+below use PostgreSQL, but are applicable to MySQL/MariaDB with the
+
+!!! warning
+
+    Make sure that your SQLite database is migrated to the latest version.
+    Starting paperless will make sure that this is the case. If your try to
+    load data from an old database schema in SQLite into a newer database
+    schema in PostgreSQL, you will run into trouble.
+
+!!! warning
+
+    On some database fields, PostgreSQL enforces predefined limits on
+    maximum length, whereas SQLite does not. The fields in question are the
+    title of documents (128 characters), names of document types, tags and
+    correspondents (128 characters), and filenames (1024 characters). If you
+    have data in these fields that surpasses these limits, migration to
+    PostgreSQL is not possible and will fail with an error.
+
+!!! warning
+
+    MySQL is case insensitive by default, treating values like "Name" and
+    "NAME" as identical. See [MySQL caveats](advanced_usage.md#mysql-caveats) for details.
+
+!!! warning
+
+    MySQL also enforces limits on maximum lengths, but does so differently than
+    PostgreSQL.  It may not be possible to migrate to MySQL due to this.
+
+!!! warning
+
+    Using mariadb version 10.4+ is recommended. Using the `utf8mb3` character set on
+    an older system may fix issues that can arise while setting up Paperless-ngx but
+    `utf8mb3` can cause issues with consumption (where `utf8mb4` does not).
+
+1.  Stop paperless, if it is running.
+
+2.  Tell paperless to use PostgreSQL:
+
+    a) With docker, copy the provided `docker-compose.postgres.yml`
+    file to `docker-compose.yml`. Remember to adjust the consumption
+    directory, if necessary.
+    b) Without docker, configure the database in your `paperless.conf`
+    file. See [configuration](configuration.md) for
+    details.
+
+3.  Open a shell and initialize the database:
+
+    a) With docker, run the following command to open a shell within
+    the paperless container:
+
+        ``` shell-session
+        $ cd /path/to/paperless
+        $ docker-compose run --rm webserver /bin/bash
+        ```
+
+        This will launch the container and initialize the PostgreSQL
+        database.
+
+    b) Without docker, remember to activate any virtual environment,
+    switch to the `src` directory and create the database schema:
+
+        ``` shell-session
+        $ cd /path/to/paperless/src
+        $ python3 manage.py migrate
+        ```
+
+        This will not copy any data yet.
+
+4.  Dump your data from SQLite:
+
+    ```shell-session
+    $ python3 manage.py dumpdata --database=sqlite --exclude=contenttypes --exclude=auth.Permission > data.json
+    ```
+
+5.  Load your data into PostgreSQL:
+
+    ```shell-session
+    $ python3 manage.py loaddata data.json
+    ```
+
+6.  If operating inside Docker, you may exit the shell now.
+
+    ```shell-session
+    $ exit
+    ```
+
+7.  Start paperless.
 
 ## Moving back to Paperless
 
@@ -743,7 +790,7 @@ Execute this:
 
 ```shell-session
 $ cd /path/to/paperless
-$ docker compose run --rm webserver migrate documents 0023
+$ docker-compose run --rm webserver migrate documents 0023
 ```
 
 Or without docker:

docs/troubleshooting.md

@@ -6,7 +6,7 @@ Check for the following issues:
 
 - Ensure that the directory you're putting your documents in is the
   folder paperless is watching. With docker, this setting is performed
-  in the `docker-compose.yml` file. Without Docker, look at the
+  in the `docker-compose.yml` file. Without docker, look at the
   `CONSUMPTION_DIR` setting. Don't adjust this setting if you're
   using docker.
 
@@ -120,7 +120,7 @@ Gotenberg raises this error.
 
 You can increase the timeout by configuring a command flag for Gotenberg
 (see also [here](https://gotenberg.dev/docs/modules/api#properties)). If
-using Docker Compose, this is achieved by the following configuration
+using docker-compose, this is achieved by the following configuration
 change in the `docker-compose.yml` file:
 
 ```yaml
@@ -138,7 +138,7 @@ command:
 You might encounter errors such as:
 
 ```shell-session
-The following error occurred while consuming document.pdf: [Errno 13] Permission denied: '/usr/src/paperless/src/../consume/document.pdf'
+The following error occured while consuming document.pdf: [Errno 13] Permission denied: '/usr/src/paperless/src/../consume/document.pdf'
 ```
 
 This happens when paperless does not have permission to delete files

docs/usage.md

@@ -109,7 +109,7 @@ process.
 
 ### Mobile upload {#usage-mobile_upload}
 
-Please see [the wiki](https://github.com/paperless-ngx/paperless-ngx/wiki/Related-Projects) for a user-maintained list of related projects and
+Please see [the wiki](https://github.com/paperless-ngx/paperless-ngx/wiki/Affiliated-Projects) for a user-maintained list of affiliated projects and
 software (e.g. for mobile devices) that is compatible with Paperless-ngx.
 
 ### IMAP (Email) {#usage-email}
@@ -149,7 +149,7 @@ different means. These are as follows:
 - **Flag:** Sets the 'important' flag on mails with consumed
   documents. Paperless will not consume flagged mails.
 - **Move to folder:** Moves consumed mails out of the way so that
-  paperless won't consume them again.
+  paperless wont consume them again.
 - **Add custom Tag:** Adds a custom tag to mails with consumed
   documents (the IMAP standard calls these "keywords"). Paperless
   will not consume mails already tagged. Not all mail servers support
@@ -206,12 +206,12 @@ for details.
 
 ## Permissions
 
-Permissions in Paperless-ngx are based around ['global' permissions](#global-permissions) as well as
-['object-level' permissions](#object-permissions). Global permissions determine which parts of the
-application a user can access (e.g. Documents, Tags, Settings) and object-level determine which
-objects are visible or editable. All objects have an 'owner' and 'view' and 'edit' permissions which
-can be granted to other users or groups. The paperless-ngx permissions system uses the built-in user
-model of the backend framework, Django.
+As of version 1.14.0 Paperless-ngx added core support for user / group permissions. Permissions is
+based around 'global' permissions as well as 'object-level' permissions. Global permissions designate
+which parts of the application a user can access (e.g. Documents, Tags, Settings) and object-level
+determine which objects are visible or editable. All objects have an 'owner' and 'view' and 'edit'
+permissions which can be granted to other users or groups. The paperless-ngx permissions system uses
+the built-in user model of the backend framework, Django.
 
 !!! tip
 
@@ -219,170 +219,86 @@ model of the backend framework, Django.
     for a Tag will _not_ affect the permissions of documents that have the Tag.
 
 Permissions can be set using the new "Permissions" tab when editing documents, or bulk-applied
-in the UI by selecting documents and choosing the "Permissions" button.
+in the UI by selecting documents and choosing the "Permissions" button. Owner can also optionally
+be set for documents uploaded via the API. Documents consumed via the consumption dir currently
+do not have an owner set.
+
+!!! note
+
+    After migration to version 1.14.0 all existing documents, tags etc. will have no explicit owner
+    set which means they will be visible / editable by all users. Once an object has an owner set,
+    only the owner can explicitly grant / revoke permissions.
+
+!!! note
+
+    When first migrating to permissions it is recommended to use a 'superuser' account (which
+    would usually have been setup during installation) to ensure you have full permissions.
+
+    Note that superusers have access to all objects.
 
 ### Default permissions
 
-[Workflows](#workflows) provide advanced ways to control permissions.
+Default permissions for documents can be set using consumption templates.
 
 For objects created via the web UI (tags, doc types, etc.) the default is to set the current user
-as owner and no extra permissions, but you can explicitly set these under Settings > Permissions.
-
-Documents consumed via the consumption directory do not have an owner or additional permissions set by default, but again, can be controlled with [Workflows](#workflows).
+as owner and no extra permissions, but you explicitly set these under Settings > Permissions.
 
 ### Users and Groups
 
-Paperless-ngx supports editing users and groups via the 'frontend' UI, which can be found under
-Settings > Users & Groups, assuming the user has access. If a user is designated
+Paperless-ngx versions after 1.14.0 allow creating and editing users and groups via the 'frontend' UI.
+These can be found under Settings > Users & Groups, assuming the user has access. If a user is designated
 as a member of a group those permissions will be inherited and this is reflected in the UI. Explicit
 permissions can be granted to limit access to certain parts of the UI (and corresponding API endpoints).
 
-!!! tip
-
-    By default, new users are not granted any permissions, except those inherited from any group(s) of which they are a member.
-
-#### Superusers
-
-Superusers can access all parts of the front and backend application as well as any and all objects.
-
-#### Admin Status
-
-Admin status (Django 'staff status') grants access to viewing the paperless logs and the system status dialog
-as well as accessing the Django backend.
-
-#### Detailed Explanation of Global Permissions {#global-permissions}
-
-Global permissions define what areas of the app and API endpoints users can access. For example, they
-determine if a user can create, edit, delete or view _any_ documents, but individual documents themselves
-still have "object-level" permissions.
-
-| Type          | Details                                                                                                                                                                  |
-| ------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
-| AppConfig     | _Change_ or higher permissions grants access to the "Application Configuration" area.                                                                                    |
-| Correspondent | Add, edit, delete or view Correspondents.                                                                                                                                |
-| CustomField   | Add, edit, delete or view Custom Fields.                                                                                                                                 |
-| Document      | Add, edit, delete or view Documents.                                                                                                                                     |
-| DocumentType  | Add, edit, delete or view Document Types.                                                                                                                                |
-| Group         | Add, edit, delete or view Groups.                                                                                                                                        |
-| MailAccount   | Add, edit, delete or view Mail Accounts.                                                                                                                                 |
-| MailRule      | Add, edit, delete or view Mail Rules.                                                                                                                                    |
-| Note          | Add, edit, delete or view Notes.                                                                                                                                         |
-| PaperlessTask | View or dismiss (_Change_) File Tasks.                                                                                                                                   |
-| SavedView     | Add, edit, delete or view Saved Views.                                                                                                                                   |
-| ShareLink     | Add, delete or view Share Links.                                                                                                                                         |
-| StoragePath   | Add, edit, delete or view Storage Paths.                                                                                                                                 |
-| Tag           | Add, edit, delete or view Tags.                                                                                                                                          |
-| UISettings    | Add, edit, delete or view the UI settings that are used by the web app.<br/>:warning: **Users that will access the web UI must be granted at least _View_ permissions.** |
-| User          | Add, edit, delete or view Users.                                                                                                                                         |
-| Workflow      | Add, edit, delete or view Workflows.<br/>Note that Workflows are global, in other words all users who can access workflows have access to the same set of them.          |
-
-#### Detailed Explanation of Object Permissions {#object-permissions}
-
-| Type  | Details                                                                                                                                                                                                                                                                                                                                  |
-| ----- | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
-| Owner | By default objects are only visible and editable by their owner.<br/>Only the object owner can grant permissions to other users or groups.<br/>Additionally, only document owners can create share links and add / remove custom fields.<br/>For backwards compatibility objects can have no owner which makes them visible to any user. |
-| View  | Confers the ability to view (not edit) a document, tag, etc.<br/>Users without 'view' (or higher) permissions will be shown _'Private'_ in place of the object name for example when viewing a document with a tag for which the user doesn't have permissions.                                                                          |
-| Edit  | Confers the ability to edit (and view) a document, tag, etc.                                                                                                                                                                                                                                                                             |
-
 ### Password reset
 
 In order to enable the password reset feature you will need to setup an SMTP backend, see
-[`PAPERLESS_EMAIL_HOST`](configuration.md#PAPERLESS_EMAIL_HOST). If your installation does not have
-[`PAPERLESS_URL`](configuration.md#PAPERLESS_URL) set, the reset link included in emails will use the server host.
+[`PAPERLESS_EMAIL_HOST`](configuration.md#PAPERLESS_EMAIL_HOST)
 
-## Workflows
+## Consumption templates
 
-!!! note
+Consumption templates were introduced in v2.0 and allow for finer control over what metadata (tags, doc
+types) and permissions (owner, privileges) are assigned to documents during consumption. In general,
+templates are applied sequentially (by sort order) but subsequent templates will never override an
+assignment from a preceding template. The same is true for mail rules, e.g. if you set the correspondent
+in a mail rule any subsequent consumption templates that are applied _will not_ overwrite this. The
+exception to this is assignments that can be multiple e.g. tags and permissions, which will be merged.
 
-    v2.3 added "Workflows" and existing "Consumption Templates" were converted automatically to the new more powerful format.
-
-Workflows allow hooking into the Paperless-ngx document pipeline, for example to alter what metadata (tags, doc types) and
-permissions (owner, privileges) are assigned to documents. Workflows can have multiple 'triggers' and 'actions'. Triggers
-are events (with optional filtering rules) that will cause the workflow to be run and actions are the set of sequential
-actions to apply.
-
-In general, workflows and any actions they contain are applied sequentially by sort order. For "assignment" actions, subsequent
-workflow actions will override previous assignments, except for assignments that accept multiple items e.g. tags, custom
-fields and permissions, which will be merged.
-
-### Workflow Triggers
-
-Currently, there are three events that correspond to workflow trigger 'types':
-
-1. **Consumption Started**: _before_ a document is consumed, so events can include filters by source (mail, consumption
-   folder or API), file path, file name, mail rule
-2. **Document Added**: _after_ a document is added. At this time, file path and source information is no longer available,
-   but the document content has been extracted and metadata such as document type, tags, etc. have been set, so these can now
-   be used for filtering.
-3. **Document Updated**: when a document is updated. Similar to 'added' events, triggers can include filtering by content matching,
-   tags, doc type, or correspondent.
-
-The following flow diagram illustrates the three trigger types:
-
-```mermaid
-flowchart TD
-    consumption{"Matching
-    'Consumption'
-    trigger(s)"}
-
-    added{"Matching
-    'Added'
-    trigger(s)"}
-
-    updated{"Matching
-    'Updated'
-    trigger(s)"}
-
-    A[New Document] --> consumption
-    consumption --> |Yes| C[Workflow Actions Run]
-    consumption --> |No| D
-    C --> D[Document Added]
-    D -- Paperless-ngx 'matching' of tags, etc. --> added
-    added --> |Yes| F[Workflow Actions Run]
-    added --> |No| G
-    F --> G[Document Finalized]
-    H[Existing Document Changed] --> updated
-    updated --> |Yes| J[Workflow Actions Run]
-    updated --> |No| K
-    J --> K[Document Saved]
-```
-
-#### Filters {#workflow-trigger-filters}
-
-Workflows allow you to filter by:
+Consumption templates allow you to filter by:
 
 - Source, e.g. documents uploaded via consume folder, API (& the web UI) and mail fetch
 - File name, including wildcards e.g. \*.pdf will apply to all pdfs
 - File path, including wildcards. Note that enabling `PAPERLESS_CONSUMER_RECURSIVE` would allow, for
   example, automatically assigning documents to different owners based on the upload directory.
-- Mail rule. Choosing this option will force 'mail fetch' to be the workflow source.
-- Content matching (`Added` and `Updated` triggers only). Filter document content using the matching settings.
-- Tags (`Added` and `Updated` triggers only). Filter for documents with any of the specified tags
-- Document type (`Added` and `Updated` triggers only). Filter documents with this doc type
-- Correspondent (`Added` and `Updated` triggers only). Filter documents with this correspondent
+- Mail rule. Choosing this option will force 'mail fetch' to be the template source.
 
-### Workflow Actions
+!!! note
 
-There are currently two types of workflow actions, "Assignment", which can assign:
+    You must include a file name filter, a path filter or a mail rule filter. Use * for either to apply
+    to all files.
 
-- Title, see [title placeholders](usage.md#title-placeholders) below
-- Tags, correspondent, document type and storage path
+Consumption templates can assign:
+
+- Title, see [title placeholders](usage.md#title_placeholders) below
+- Tags, correspondent, document types
 - Document owner
 - View and / or edit permissions to users or groups
-- Custom fields. Note that no value for the field will be set
 
-and "Removal" actions, which can remove either all of or specific sets of the following:
+### Consumption template permissions
 
-- Tags, correspondents, document types or storage paths
-- Document owner
-- View and / or edit permissions
-- Custom fields
+All users who have application permissions for editing consumption templates can see the same set
+of templates. In other words, templates themselves intentionally do not have an owner or permissions.
 
-#### Title placeholders
+Given their potentially far-reaching capabilities, you may want to restrict access to templates.
 
-Workflow titles can include placeholders but the available options differ depending on the type of
-workflow trigger. This is because at the time of consumption (when the title is to be set), no automatic tags etc. have been
-applied. You can use the following placeholders with any trigger type:
+Upon migration, existing installs will grant access to consumption templates to users who can add
+documents (and superusers who can always access all parts of the app).
+
+### Title placeholders
+
+Consumption template titles can include placeholders, _only for items that are assigned within the template_.
+This is because at the time of consumption (when the title is to be set), no automatic tags etc. have been
+applied. You can use the following placeholders:
 
 - `{correspondent}`: assigned correspondent name
 - `{document_type}`: assigned document type name
@@ -394,29 +310,6 @@ applied. You can use the following placeholders with any trigger type:
 - `{added_month_name}`: added month name
 - `{added_month_name_short}`: added month short name
 - `{added_day}`: added day
-- `{added_time}`: added time in HH:MM format
-- `{original_filename}`: original file name without extension
-
-The following placeholders are only available for "added" or "updated" triggers
-
-- `{created}`: created datetime
-- `{created_year}`: created year
-- `{created_year_short}`: created year
-- `{created_month}`: created month
-- `{created_month_name}`: created month name
-- `{created_month_name_short}`: created month short name
-- `{created_day}`: created day
-- `{created_time}`: created time in HH:MM format
-
-### Workflow permissions
-
-All users who have application permissions for editing workflows can see the same set
-of workflows. In other words, workflows themselves intentionally do not have an owner or permissions.
-
-Given their potentially far-reaching capabilities, you may want to restrict access to workflows.
-
-Upon migration, existing installs will grant access to workflows to users who can add
-documents (and superusers who can always access all parts of the app).
 
 ## Custom Fields {#custom-fields}
 
@@ -425,12 +318,13 @@ to optionally attach data to documents which does not fit in the existing set of
 Paperless-ngx provides.
 
 1. First, create a custom field (under "Manage"), with a given name and data type. This could be something like "Invoice Number" or "Date Paid", with a data type of "Number", "Date", "String", etc.
-2. Once created, a field can be used with documents and data stored. To do so, use the "Custom Fields" menu on the document detail page, choose your existing field from the dropdown. Once the field is visible in the form you can enter the appropriate data which will be validated according to the custom field "data type".
+2. Once created, a field can be used with documents and data stored. To do so, use the "Custom Fields" menu on the document detail page, choose your existing field and click "Add". Once the field is visible in the form you can enter the appropriate
+   data which will be validated according to the custom field "data type".
 3. Fields can be removed by hovering over the field name revealing a "Remove" button.
 
 !!! important
 
-    Added / removed fields, as well as any data, is not saved to the document until you
+    Added / removed fields, as well as any data is not saved to the document until you
     actually hit the "Save" button, similar to other changes on the document details page.
 
 !!! note
@@ -447,13 +341,11 @@ The following custom field types are supported:
 - `URL`: a valid url
 - `Integer`: integer number e.g. 12
 - `Number`: float number e.g. 12.3456
-- `Monetary`: [ISO 4217 currency code](https://en.wikipedia.org/wiki/ISO_4217#List_of_ISO_4217_currency_codes) and a number with exactly two decimals, e.g. USD12.30
-- `Document Link`: reference(s) to other document(s) displayed as links, automatically creates a symmetrical link in reverse
-- `Select`: a pre-defined list of strings from which the user can choose
+- `Monetary`: float number with exactly two decimals, e.g. 12.30
 
 ## Share Links
 
-Paperless-ngx added the ability to create shareable links to files in version 2.0. You can find the button for this on the document detail screen.
+Paperless-ngx added the abiltiy to create shareable links to files in version 2.0. You can find the button for this on the document detail screen.
 
 - Share links do not require a user to login and thus link directly to a file.
 - Links are unique and are of the form `{paperless-url}/share/{randomly-generated-slug}`.
@@ -464,34 +356,6 @@ Paperless-ngx added the ability to create shareable links to files in version 2.
 
     If your paperless-ngx instance is behind a reverse-proxy you may want to create an exception to bypass any authentication layers that are part of your setup in order to make links truly publicly-accessible. Of course, do so with caution.
 
-## PDF Actions
-
-Paperless-ngx supports four basic editing operations for PDFs (these operations currently cannot be performed on non-PDF files):
-
-- Merging documents: available when selecting multiple documents for 'bulk editing'.
-- Rotating documents: available when selecting multiple documents for 'bulk editing' and from an individual document's details page.
-- Splitting documents: available from an individual document's details page.
-- Deleting pages: available from an individual document's details page.
-
-!!! important
-
-    Note that rotation and deleting pages alter the Paperless-ngx _original_ file, which would, for example, invalidate a digital signature.
-
-## Document History
-
-As of version 2.7, Paperless-ngx automatically records all changes to a document and records this in an audit log. The feature requires [`PAPERLESS_AUDIT_LOG_ENABLED`](configuration.md#PAPERLESS_AUDIT_LOG_ENABLED) be enabled, which it is by default as of version 2.7.
-Changes to documents are visible under the "History" tab. Note that certain changes such as those made by workflows, record the 'actor'
-as "System".
-
-## Document Trash
-
-When you first delete a document it is moved to the 'trash' until either it is explicitly deleted or it is automatically removed after a set amount of time has passed.
-You can set how long documents remain in the trash before being automatically deleted with [`PAPERLESS_EMPTY_TRASH_DELAY`](configuration.md#PAPERLESS_EMPTY_TRASH_DELAY), which defaults
-to 30 days. Until the file is actually deleted (e.g. the trash is emptied), all files and database content remains intact and can be restored at any point up until that time.
-
-Additionally you may configure a directory where deleted files are moved to when they the trash is emptied with [`PAPERLESS_EMPTY_TRASH_DIR`](configuration.md#PAPERLESS_EMPTY_TRASH_DIR).
-Note that the empty trash directory only stores the original file, the archive file and all database information is permanently removed once a document is fully deleted.
-
 ## Best practices {#basic-searching}
 
 Paperless offers a couple tools that help you organize your document
@@ -564,16 +428,6 @@ collection.
 
 ## Searching {#basic-usage_searching}
 
-### Global search
-
-The top search bar in the web UI performs a "global" search of the various
-objects Paperless-ngx uses, including documents, tags, workflows, etc. Only
-objects for which the user has appropriate permissions are returned. For
-documents, if there are < 3 results, "advanced" search results (which use
-the document index) will also be included. This can be disabled under settings.
-
-### Document searches
-
 Paperless offers an extensive searching mechanism that is designed to
 allow you to quickly find a document you're looking for (for example,
 that thing that just broke and you bought a couple months ago, that
@@ -629,12 +483,6 @@ language](https://whoosh.readthedocs.io/en/latest/querylang.html). For
 details on what date parsing utilities are available, see [Date
 parsing](https://whoosh.readthedocs.io/en/latest/dates.html#parsing-date-queries).
 
-## Keyboard shortcuts / hotkeys
-
-A list of available hotkeys can be shown on any page using <kbd>Shift</kbd> +
-<kbd>?</kbd>. The help dialog shows only the keys that are currently available
-based on which area of Paperless-ngx you are using.
-
 ## The recommended workflow {#usage-recommended-workflow}
 
 Once you have familiarized yourself with paperless and are ready to use

gunicorn.conf.py

@@ -37,11 +37,11 @@ def worker_int(worker):
     id2name = {th.ident: th.name for th in threading.enumerate()}
     code = []
     for threadId, stack in sys._current_frames().items():
-        code.append(f"\n# Thread: {id2name.get(threadId, '')}({threadId})")
+        code.append("\n# Thread: %s(%d)" % (id2name.get(threadId, ""), threadId))
         for filename, lineno, name, line in traceback.extract_stack(stack):
-            code.append(f'File: "{filename}", line {lineno}, in {name}')
+            code.append('File: "%s", line %d, in %s' % (filename, lineno, name))
             if line:
-                code.append(f"  {line.strip()}")
+                code.append("  %s" % (line.strip()))
     worker.log.debug("\n".join(code))
 
 

install-paperless-ngx.sh

@@ -56,9 +56,14 @@ if ! command -v docker &> /dev/null ; then
 	exit 1
 fi
 
-if ! docker compose &> /dev/null ; then
-	echo "docker compose plugin not found. Is docker compose installed?"
-	exit 1
+DOCKER_COMPOSE_CMD="docker-compose"
+if ! command -v ${DOCKER_COMPOSE_CMD} &> /dev/null ; then
+	if docker compose version &> /dev/null ; then
+		DOCKER_COMPOSE_CMD="docker compose"
+	else
+		echo "docker-compose executable not found. Is docker-compose installed?"
+		exit 1
+	fi
 fi
 
 # Check if user has permissions to run Docker by trying to get the status of Docker (docker status).
@@ -71,17 +76,7 @@ if ! docker stats --no-stream &> /dev/null ; then
 	sleep 3
 fi
 
-# Added handling for timezone for busybox based linux, not having timedatectl available (i.e. QNAP QTS)
-# if neither timedatectl nor /etc/TZ is succeeding, defaulting to GMT.
-if  command -v timedatectl &> /dev/null ; then
-	default_time_zone=$(timedatectl show -p Timezone --value)
-elif [ -f /etc/TZ ] && [ -f /etc/tzlist ] ; then
-	TZ=$(cat /etc/TZ)
-	default_time_zone=$(grep -B 1 -m 1 "$TZ" /etc/tzlist | head -1 | cut -f 2 -d =)
-else
-	echo "WARN: unable to detect timezone, defaulting to Etc/UTC"
-	default_time_zone="Etc/UTC"
-fi
+default_time_zone=$(timedatectl show -p Timezone --value)
 
 set -e
 
@@ -325,7 +320,7 @@ fi
 wget "https://raw.githubusercontent.com/paperless-ngx/paperless-ngx/main/docker/compose/docker-compose.$DOCKER_COMPOSE_VERSION.yml" -O docker-compose.yml
 wget "https://raw.githubusercontent.com/paperless-ngx/paperless-ngx/main/docker/compose/.env" -O .env
 
-SECRET_KEY=$(LC_ALL=C tr -dc 'a-zA-Z0-9!#$%&()*+,-./:;<=>?@[\]^_`{|}~' < /dev/urandom | dd bs=1 count=64 2>/dev/null)
+SECRET_KEY=$(LC_ALL=C tr -dc 'a-zA-Z0-9!"#$%&'\''()*+,-./:;<=>?@[\]^_`{|}~' < /dev/urandom | head --bytes 64)
 
 
 DEFAULT_LANGUAGES=("deu eng fra ita spa")
@@ -345,7 +340,7 @@ read -r -a OCR_LANGUAGES_ARRAY <<< "${_split_langs}"
 	fi
 	echo "PAPERLESS_TIME_ZONE=$TIME_ZONE"
 	echo "PAPERLESS_OCR_LANGUAGE=$OCR_LANGUAGE"
-	echo "PAPERLESS_SECRET_KEY='$SECRET_KEY'"
+	echo "PAPERLESS_SECRET_KEY=$SECRET_KEY"
 	if [[ ! ${DEFAULT_LANGUAGES[*]} =~ ${OCR_LANGUAGES_ARRAY[*]} ]] ; then
 		echo "PAPERLESS_OCR_LANGUAGES=${OCR_LANGUAGES_ARRAY[*]}"
 	fi
@@ -387,16 +382,16 @@ if [ "$l1" -eq "$l2" ] ; then
 fi
 
 
-docker compose pull
+${DOCKER_COMPOSE_CMD} pull
 
 if [ "$DATABASE_BACKEND" == "postgres" ] || [ "$DATABASE_BACKEND" == "mariadb" ] ; then
-	echo "Starting DB first for initialization"
-	docker compose up --detach db
+	echo "Starting DB first for initilzation"
+	${DOCKER_COMPOSE_CMD} up --detach db
 	# hopefully enough time for even the slower systems
 	sleep 15
-	docker compose stop
+	${DOCKER_COMPOSE_CMD} stop
 fi
 
-docker compose run --rm -e DJANGO_SUPERUSER_PASSWORD="$PASSWORD" webserver createsuperuser --noinput --username "$USERNAME" --email "$EMAIL"
+${DOCKER_COMPOSE_CMD} run --rm -e DJANGO_SUPERUSER_PASSWORD="$PASSWORD" webserver createsuperuser --noinput --username "$USERNAME" --email "$EMAIL"
 
-docker compose up --detach
+${DOCKER_COMPOSE_CMD} up --detach

mkdocs.yml

@@ -44,14 +44,6 @@ markdown_extensions:
   - pymdownx.inlinehilite
   - pymdownx.snippets
   - footnotes
-  - pymdownx.superfences:
-      custom_fences:
-        - name: mermaid
-          class: mermaid
-          format: !!python/name:pymdownx.superfences.fence_code_format
-  - pymdownx.emoji:
-      emoji_index: !!python/name:material.extensions.emoji.twemoji
-      emoji_generator: !!python/name:material.extensions.emoji.to_svg
 strict: true
 nav:
     - index.md
@@ -75,7 +67,4 @@ extra:
     - icon: material/chat
       link: https://matrix.to/#/#paperless:matrix.org
 plugins:
-  - search
-  - glightbox:
-       skip_classes:
-         - no-lightbox
+  - glightbox

paperless-ngx.code-workspace

@@ -1,41 +0,0 @@
-{
-	"folders": [
-		{
-			"path": "."
-		},
-		{
-			"path": "./src",
-			"name": "Backend"
-		},
-		{
-			"path": "./src-ui",
-			"name": "Frontend"
-		},
-		{
-			"path": "./.github",
-			"name": "CI/CD"
-		},
-		{
-			"path": "./docs",
-			"name": "Documentation"
-		}
-
-	],
-	"settings": {
-		"files.exclude": {
-			"**/__pycache__": true,
-			"**/.mypy_cache": true,
-			"**/.ruff_cache": true,
-			"**/.pytest_cache": true,
-			"**/.idea": true,
-			"**/.venv": true,
-			"**/.coverage": true,
-			"**/coverage.json": true
-		},
-		"python.defaultInterpreterPath": ".venv/bin/python3",
-	},
-	"extensions": {
-		"recommendations": ["ms-python.python", "charliermarsh.ruff", "editorconfig.editorconfig"],
-		"unwantedRecommendations": ["ms-python.black-formatter"]
-	}
-}

paperless.conf.example

@@ -19,7 +19,7 @@
 
 #PAPERLESS_CONSUMPTION_DIR=../consume
 #PAPERLESS_DATA_DIR=../data
-#PAPERLESS_EMPTY_TRASH_DIR=
+#PAPERLESS_TRASH_DIR=
 #PAPERLESS_MEDIA_ROOT=../media
 #PAPERLESS_STATICDIR=../static
 #PAPERLESS_FILENAME_FORMAT=
@@ -68,8 +68,6 @@
 #PAPERLESS_CONSUMER_BARCODE_STRING=PATCHT
 #PAPERLESS_CONSUMER_BARCODE_UPSCALE=0.0
 #PAPERLESS_CONSUMER_BARCODE_DPI=300
-#PAPERLESS_CONSUMER_ENABLE_TAG_BARCODE=false
-#PAPERLESS_CONSUMER_TAG_BARCODE_MAPPING={"TAG:(.*)": "\\g<1>"}
 #PAPERLESS_CONSUMER_ENABLE_COLLATE_DOUBLE_SIDED=false
 #PAPERLESS_CONSUMER_COLLATE_DOUBLE_SIDED_SUBDIR_NAME=double-sided
 #PAPERLESS_CONSUMER_COLLATE_DOUBLE_SIDED_TIFF_SUPPORT=false

scripts/post-consumption-example.sh

@@ -14,7 +14,6 @@ following additional information about it:
 * Thumbnail Path: ${DOCUMENT_THUMBNAIL_PATH}
 * Download URL: ${DOCUMENT_DOWNLOAD_URL}
 * Thumbnail URL: ${DOCUMENT_THUMBNAIL_URL}
-* Owner Name: ${DOCUMENT_OWNER}
 * Correspondent: ${DOCUMENT_CORRESPONDENT}
 * Tags: ${DOCUMENT_TAGS}
 

scripts/start_services.sh

@@ -3,4 +3,4 @@
 docker run -p 5432:5432 -e POSTGRES_PASSWORD=password -v paperless_pgdata:/var/lib/postgresql/data -d postgres:15
 docker run -d -p 6379:6379 redis:latest
 docker run -p 3000:3000 -d gotenberg/gotenberg:7.8 gotenberg --chromium-disable-javascript=true --chromium-allow-list="file:///tmp/.*"
-docker run -p 9998:9998 -d docker.io/apache/tika:latest
+docker run -p 9998:9998 -d ghcr.io/paperless-ngx/tika:latest

src-ui/.eslintrc.json

@@ -1,8 +1,7 @@
 {
   "root": true,
   "ignorePatterns": [
-    "projects/**/*",
-    "/src/app/components/common/pdf-viewer/**"
+    "projects/**/*"
   ],
   "overrides": [
     {

src-ui/angular.json

@@ -31,7 +31,6 @@
           "fr-FR": "src/locale/messages.fr_FR.xlf",
           "hu-HU": "src/locale/messages.hu_HU.xlf",
           "it-IT": "src/locale/messages.it_IT.xlf",
-          "ja-JP": "src/locale/messages.ja_JP.xlf",
           "lb-LU": "src/locale/messages.lb_LU.xlf",
           "nl-NL": "src/locale/messages.nl_NL.xlf",
           "no-NO": "src/locale/messages.no_NO.xlf",
@@ -66,7 +65,7 @@
               "src/assets",
               "src/manifest.webmanifest",
               {
-                "glob": "{pdf.worker.min.js,pdf.min.js}",
+                "glob": "pdf.worker.min.js",
                 "input": "node_modules/pdfjs-dist/build/",
                 "output": "/assets/js/"
               }
@@ -76,8 +75,7 @@
             ],
             "scripts": [],
             "allowedCommonJsDependencies": [
-              "ng2-pdf-viewer",
-              "file-saver"
+              "ng2-pdf-viewer"
             ],
             "vendorChunk": true,
             "extractLicenses": false,
@@ -111,7 +109,7 @@
                 {
                   "type": "anyComponentStyle",
                   "maximumWarning": "6kb",
-                  "maximumError": "30kb"
+                  "maximumError": "10kb"
                 }
               ]
             },
@@ -126,18 +124,18 @@
         "serve": {
           "builder": "@angular-devkit/build-angular:dev-server",
           "options": {
-            "buildTarget": "paperless-ui:build:en-US"
+            "browserTarget": "paperless-ui:build:en-US"
           },
           "configurations": {
             "production": {
-              "buildTarget": "paperless-ui:build:production"
+              "browserTarget": "paperless-ui:build:production"
             }
           }
         },
         "extract-i18n": {
           "builder": "@angular-devkit/build-angular:extract-i18n",
           "options": {
-            "buildTarget": "paperless-ui:build"
+            "browserTarget": "paperless-ui:build"
           }
         },
         "test": {

src-ui/e2e/dashboard/dashboard.spec.ts

@@ -9,7 +9,7 @@ test('dashboard inbox link', async ({ page }) => {
   await page.routeFromHAR(REQUESTS_HAR1, { notFound: 'fallback' })
   await page.goto('/dashboard')
   await page.getByRole('link', { name: 'Documents in inbox' }).click()
-  await expect(page).toHaveURL(/tags__id__in=9/)
+  await expect(page).toHaveURL(/tags__id__all=9/)
   await expect(page.locator('pngx-document-list')).toHaveText(/8 documents/)
 })
 

src-ui/e2e/dashboard/requests/api-dashboard1.har

@@ -124,7 +124,7 @@
           "content": {
             "size": -1,
             "mimeType": "application/json",
-            "text": "{\"count\":6,\"next\":null,\"previous\":null,\"all\":[8,17,7,4,11,15],\"results\":[{\"id\":8,\"name\":\"Correspondent 2\",\"show_on_dashboard\":false,\"show_in_sidebar\":false,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":3,\"value\":\"2\"}],\"owner\":\"2\",\"user_can_change\":true,\"page_size\":10,\"display_mode\":\"table\",\"display_fields\":[\"created\",\"title\",\"tag\",\"documenttype\"]},{\"id\":17,\"name\":\"In the Last Month\",\"show_on_dashboard\":false,\"show_in_sidebar\":false,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":20,\"value\":\"created:[-1 month to now]\"}],\"owner\":\"2\",\"user_can_change\":true,\"page_size\":10,\"display_mode\":\"table\",\"display_fields\":[\"created\",\"title\",\"tag\",\"documenttype\"]},{\"id\":7,\"name\":\"Inbox\",\"show_on_dashboard\":true,\"show_in_sidebar\":true,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":6,\"value\":\"9\"}],\"owner\":\"2\",\"user_can_change\":true,\"page_size\":10,\"display_mode\":\"table\",\"display_fields\":[\"created\",\"title\",\"tag\",\"documenttype\"]},{\"id\":4,\"name\":\"Recently Added\",\"show_on_dashboard\":true,\"show_in_sidebar\":true,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[],\"owner\":\"2\",\"user_can_change\":true,\"page_size\":10,\"display_mode\":\"table\",\"display_fields\":[\"created\",\"title\",\"tag\",\"documenttype\"]},{\"id\":11,\"name\":\"Tag: Another Sample Tag\",\"show_on_dashboard\":false,\"show_in_sidebar\":true,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":6,\"value\":\"4\"}],\"owner\":\"2\",\"user_can_change\":true,\"page_size\":10,\"display_mode\":\"table\",\"display_fields\":[\"created\",\"title\",\"tag\",\"documenttype\"]},{\"id\":15,\"name\":\"View ASN not empty\",\"show_on_dashboard\":false,\"show_in_sidebar\":false,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":18,\"value\":\"false\"}],\"owner\":\"2\",\"user_can_change\":true,\"page_size\":10,\"display_mode\":\"table\",\"display_fields\":[\"created\",\"title\",\"tag\",\"documenttype\"]}]}"
+            "text": "{\"count\":6,\"next\":null,\"previous\":null,\"all\":[8,17,7,4,11,15],\"results\":[{\"id\":8,\"name\":\"Correspondent 2\",\"show_on_dashboard\":false,\"show_in_sidebar\":false,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":3,\"value\":\"2\"}],\"owner\":\"2\",\"user_can_change\":true},{\"id\":17,\"name\":\"In the Last Month\",\"show_on_dashboard\":false,\"show_in_sidebar\":false,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":20,\"value\":\"created:[-1 month to now]\"}],\"owner\":\"2\",\"user_can_change\":true},{\"id\":7,\"name\":\"Inbox\",\"show_on_dashboard\":true,\"show_in_sidebar\":true,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":6,\"value\":\"9\"}],\"owner\":\"2\",\"user_can_change\":true},{\"id\":4,\"name\":\"Recently Added\",\"show_on_dashboard\":true,\"show_in_sidebar\":true,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[],\"owner\":\"2\",\"user_can_change\":true},{\"id\":11,\"name\":\"Tag: Another Sample Tag\",\"show_on_dashboard\":false,\"show_in_sidebar\":true,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":6,\"value\":\"4\"}],\"owner\":\"2\",\"user_can_change\":true},{\"id\":15,\"name\":\"View ASN not empty\",\"show_on_dashboard\":false,\"show_in_sidebar\":false,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":18,\"value\":\"false\"}],\"owner\":\"2\",\"user_can_change\":true}]}"
           },
           "headersSize": -1,
           "bodySize": -1,
@@ -236,7 +236,7 @@
           "content": {
             "size": -1,
             "mimeType": "application/json",
-            "text": "{\"documents_total\":61,\"documents_inbox\":8,\"inbox_tags\":[9],\"document_file_type_counts\":[{\"mime_type\":\"application/pdf\",\"mime_type_count\":57},{\"mime_type\":\"text/plain\",\"mime_type_count\":3},{\"mime_type\":\"text/csv\",\"mime_type_count\":1}],\"character_count\":2407053}"
+            "text": "{\"documents_total\":61,\"documents_inbox\":8,\"inbox_tag\":9,\"document_file_type_counts\":[{\"mime_type\":\"application/pdf\",\"mime_type_count\":57},{\"mime_type\":\"text/plain\",\"mime_type_count\":3},{\"mime_type\":\"text/csv\",\"mime_type_count\":1}],\"character_count\":2407053}"
           },
           "headersSize": -1,
           "bodySize": -1,
@@ -250,7 +250,7 @@
         "time": 0.609,
         "request": {
           "method": "GET",
-          "url": "http://localhost:8000/api/documents/?page=1&page_size=10&ordering=-created&truncate_content=true&tags__id__in=9",
+          "url": "http://localhost:8000/api/documents/?page=1&page_size=10&ordering=-created&truncate_content=true&tags__id__all=9",
           "httpVersion": "HTTP/1.1",
           "cookies": [],
           "headers": [
@@ -284,7 +284,7 @@
               "value": "true"
             },
             {
-              "name": "tags__id__in",
+              "name": "tags__id__all",
               "value": "9"
             }
           ],
@@ -468,7 +468,7 @@
         "time": 0.951,
         "request": {
           "method": "GET",
-          "url": "http://localhost:8000/api/documents/?page=1&page_size=50&ordering=-created&truncate_content=true&tags__id__in=9",
+          "url": "http://localhost:8000/api/documents/?page=1&page_size=50&ordering=-created&truncate_content=true&tags__id__all=9",
           "httpVersion": "HTTP/1.1",
           "cookies": [],
           "headers": [
@@ -502,7 +502,7 @@
               "value": "true"
             },
             {
-              "name": "tags__id__in",
+              "name": "tags__id__all",
               "value": "9"
             }
           ],

src-ui/e2e/dashboard/requests/api-dashboard2.har

@@ -124,7 +124,7 @@
           "content": {
             "size": -1,
             "mimeType": "application/json",
-            "text": "{\"count\":6,\"next\":null,\"previous\":null,\"all\":[8,17,7,4,11,15],\"results\":[{\"id\":8,\"name\":\"Correspondent 2\",\"show_on_dashboard\":false,\"show_in_sidebar\":false,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":3,\"value\":\"2\"}],\"owner\":\"2\",\"user_can_change\":true,\"page_size\":10,\"display_mode\":\"table\",\"display_fields\":[\"created\",\"title\",\"tag\",\"documenttype\"]},{\"id\":17,\"name\":\"In the Last Month\",\"show_on_dashboard\":false,\"show_in_sidebar\":false,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":20,\"value\":\"created:[-1 month to now]\"}],\"owner\":\"2\",\"user_can_change\":true,\"page_size\":10,\"display_mode\":\"table\",\"display_fields\":[\"created\",\"title\",\"tag\",\"documenttype\"]},{\"id\":7,\"name\":\"Inbox\",\"show_on_dashboard\":true,\"show_in_sidebar\":true,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":6,\"value\":\"9\"}],\"owner\":\"2\",\"user_can_change\":true,\"page_size\":10,\"display_mode\":\"table\",\"display_fields\":[\"created\",\"title\",\"tag\",\"documenttype\"]},{\"id\":4,\"name\":\"Recently Added\",\"show_on_dashboard\":true,\"show_in_sidebar\":true,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[],\"owner\":\"2\",\"user_can_change\":true,\"page_size\":10,\"display_mode\":\"table\",\"display_fields\":[\"created\",\"title\",\"tag\",\"documenttype\"]},{\"id\":11,\"name\":\"Tag: Another Sample Tag\",\"show_on_dashboard\":false,\"show_in_sidebar\":true,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":6,\"value\":\"4\"}],\"owner\":\"2\",\"user_can_change\":true,\"page_size\":10,\"display_mode\":\"table\",\"display_fields\":[\"created\",\"title\",\"tag\",\"documenttype\"]},{\"id\":15,\"name\":\"View ASN not empty\",\"show_on_dashboard\":false,\"show_in_sidebar\":false,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":18,\"value\":\"false\"}],\"owner\":\"2\",\"user_can_change\":true,\"page_size\":10,\"display_mode\":\"table\",\"display_fields\":[\"created\",\"title\",\"tag\",\"documenttype\"]}]}"
+            "text": "{\"count\":6,\"next\":null,\"previous\":null,\"all\":[8,17,7,4,11,15],\"results\":[{\"id\":8,\"name\":\"Correspondent 2\",\"show_on_dashboard\":false,\"show_in_sidebar\":false,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":3,\"value\":\"2\"}],\"owner\":\"2\",\"user_can_change\":true},{\"id\":17,\"name\":\"In the Last Month\",\"show_on_dashboard\":false,\"show_in_sidebar\":false,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":20,\"value\":\"created:[-1 month to now]\"}],\"owner\":\"2\",\"user_can_change\":true},{\"id\":7,\"name\":\"Inbox\",\"show_on_dashboard\":true,\"show_in_sidebar\":true,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":6,\"value\":\"9\"}],\"owner\":\"2\",\"user_can_change\":true},{\"id\":4,\"name\":\"Recently Added\",\"show_on_dashboard\":true,\"show_in_sidebar\":true,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[],\"owner\":\"2\",\"user_can_change\":true},{\"id\":11,\"name\":\"Tag: Another Sample Tag\",\"show_on_dashboard\":false,\"show_in_sidebar\":true,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":6,\"value\":\"4\"}],\"owner\":\"2\",\"user_can_change\":true},{\"id\":15,\"name\":\"View ASN not empty\",\"show_on_dashboard\":false,\"show_in_sidebar\":false,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":18,\"value\":\"false\"}],\"owner\":\"2\",\"user_can_change\":true}]}"
           },
           "headersSize": -1,
           "bodySize": -1,
@@ -236,7 +236,7 @@
           "content": {
             "size": -1,
             "mimeType": "application/json",
-            "text": "{\"documents_total\":61,\"documents_inbox\":8,\"inbox_tags\":[9],\"document_file_type_counts\":[{\"mime_type\":\"application/pdf\",\"mime_type_count\":57},{\"mime_type\":\"text/plain\",\"mime_type_count\":3},{\"mime_type\":\"text/csv\",\"mime_type_count\":1}],\"character_count\":2407053}"
+            "text": "{\"documents_total\":61,\"documents_inbox\":8,\"inbox_tag\":9,\"document_file_type_counts\":[{\"mime_type\":\"application/pdf\",\"mime_type_count\":57},{\"mime_type\":\"text/plain\",\"mime_type_count\":3},{\"mime_type\":\"text/csv\",\"mime_type_count\":1}],\"character_count\":2407053}"
           },
           "headersSize": -1,
           "bodySize": -1,
@@ -250,7 +250,7 @@
         "time": 0.622,
         "request": {
           "method": "GET",
-          "url": "http://localhost:8000/api/documents/?page=1&page_size=10&ordering=-created&truncate_content=true&tags__id__in=9",
+          "url": "http://localhost:8000/api/documents/?page=1&page_size=10&ordering=-created&truncate_content=true&tags__id__all=9",
           "httpVersion": "HTTP/1.1",
           "cookies": [],
           "headers": [
@@ -284,7 +284,7 @@
               "value": "true"
             },
             {
-              "name": "tags__id__in",
+              "name": "tags__id__all",
               "value": "9"
             }
           ],

src-ui/e2e/dashboard/requests/api-dashboard3.har

@@ -124,7 +124,7 @@
           "content": {
             "size": -1,
             "mimeType": "application/json",
-            "text": "{\"count\":6,\"next\":null,\"previous\":null,\"all\":[8,17,7,4,11,15],\"results\":[{\"id\":8,\"name\":\"Correspondent 2\",\"show_on_dashboard\":false,\"show_in_sidebar\":false,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":3,\"value\":\"2\"}],\"owner\":\"2\",\"user_can_change\":true,\"page_size\":10,\"display_mode\":\"table\",\"display_fields\":[\"created\",\"title\",\"tag\",\"documenttype\"]},{\"id\":17,\"name\":\"In the Last Month\",\"show_on_dashboard\":false,\"show_in_sidebar\":false,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":20,\"value\":\"created:[-1 month to now]\"}],\"owner\":\"2\",\"user_can_change\":true,\"page_size\":10,\"display_mode\":\"table\",\"display_fields\":[\"created\",\"title\",\"tag\",\"documenttype\"]},{\"id\":7,\"name\":\"Inbox\",\"show_on_dashboard\":true,\"show_in_sidebar\":true,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":6,\"value\":\"9\"}],\"owner\":\"2\",\"user_can_change\":true,\"page_size\":10,\"display_mode\":\"table\",\"display_fields\":[\"created\",\"title\",\"tag\",\"documenttype\"]},{\"id\":4,\"name\":\"Recently Added\",\"show_on_dashboard\":true,\"show_in_sidebar\":true,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[],\"owner\":\"2\",\"user_can_change\":true,\"page_size\":10,\"display_mode\":\"table\",\"display_fields\":[\"created\",\"title\",\"tag\",\"documenttype\"]},{\"id\":11,\"name\":\"Tag: Another Sample Tag\",\"show_on_dashboard\":false,\"show_in_sidebar\":true,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":6,\"value\":\"4\"}],\"owner\":\"2\",\"user_can_change\":true,\"page_size\":10,\"display_mode\":\"table\",\"display_fields\":[\"created\",\"title\",\"tag\",\"documenttype\"]},{\"id\":15,\"name\":\"View ASN not empty\",\"show_on_dashboard\":false,\"show_in_sidebar\":false,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":18,\"value\":\"false\"}],\"owner\":\"2\",\"user_can_change\":true,\"page_size\":10,\"display_mode\":\"table\",\"display_fields\":[\"created\",\"title\",\"tag\",\"documenttype\"]}]}"
+            "text": "{\"count\":6,\"next\":null,\"previous\":null,\"all\":[8,17,7,4,11,15],\"results\":[{\"id\":8,\"name\":\"Correspondent 2\",\"show_on_dashboard\":false,\"show_in_sidebar\":false,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":3,\"value\":\"2\"}],\"owner\":\"2\",\"user_can_change\":true},{\"id\":17,\"name\":\"In the Last Month\",\"show_on_dashboard\":false,\"show_in_sidebar\":false,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":20,\"value\":\"created:[-1 month to now]\"}],\"owner\":\"2\",\"user_can_change\":true},{\"id\":7,\"name\":\"Inbox\",\"show_on_dashboard\":true,\"show_in_sidebar\":true,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":6,\"value\":\"9\"}],\"owner\":\"2\",\"user_can_change\":true},{\"id\":4,\"name\":\"Recently Added\",\"show_on_dashboard\":true,\"show_in_sidebar\":true,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[],\"owner\":\"2\",\"user_can_change\":true},{\"id\":11,\"name\":\"Tag: Another Sample Tag\",\"show_on_dashboard\":false,\"show_in_sidebar\":true,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":6,\"value\":\"4\"}],\"owner\":\"2\",\"user_can_change\":true},{\"id\":15,\"name\":\"View ASN not empty\",\"show_on_dashboard\":false,\"show_in_sidebar\":false,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":18,\"value\":\"false\"}],\"owner\":\"2\",\"user_can_change\":true}]}"
           },
           "headersSize": -1,
           "bodySize": -1,
@@ -236,7 +236,7 @@
           "content": {
             "size": -1,
             "mimeType": "application/json",
-            "text": "{\"documents_total\":61,\"documents_inbox\":8,\"inbox_tags\":[9],\"document_file_type_counts\":[{\"mime_type\":\"application/pdf\",\"mime_type_count\":57},{\"mime_type\":\"text/plain\",\"mime_type_count\":3},{\"mime_type\":\"text/csv\",\"mime_type_count\":1}],\"character_count\":2407053}"
+            "text": "{\"documents_total\":61,\"documents_inbox\":8,\"inbox_tag\":9,\"document_file_type_counts\":[{\"mime_type\":\"application/pdf\",\"mime_type_count\":57},{\"mime_type\":\"text/plain\",\"mime_type_count\":3},{\"mime_type\":\"text/csv\",\"mime_type_count\":1}],\"character_count\":2407053}"
           },
           "headersSize": -1,
           "bodySize": -1,

src-ui/e2e/dashboard/requests/api-dashboard4.har

@@ -124,7 +124,7 @@
           "content": {
             "size": -1,
             "mimeType": "application/json",
-            "text": "{\"count\":6,\"next\":null,\"previous\":null,\"all\":[8,17,7,4,11,15],\"results\":[{\"id\":8,\"name\":\"Correspondent 2\",\"show_on_dashboard\":false,\"show_in_sidebar\":false,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":3,\"value\":\"2\"}],\"owner\":\"2\",\"user_can_change\":true,\"page_size\":10,\"display_mode\":\"table\",\"display_fields\":[\"created\",\"title\",\"tag\",\"documenttype\"]},{\"id\":17,\"name\":\"In the Last Month\",\"show_on_dashboard\":false,\"show_in_sidebar\":false,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":20,\"value\":\"created:[-1 month to now]\"}],\"owner\":\"2\",\"user_can_change\":true,\"page_size\":10,\"display_mode\":\"table\",\"display_fields\":[\"created\",\"title\",\"tag\",\"documenttype\"]},{\"id\":7,\"name\":\"Inbox\",\"show_on_dashboard\":true,\"show_in_sidebar\":true,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":6,\"value\":\"9\"}],\"owner\":\"2\",\"user_can_change\":true,\"page_size\":10,\"display_mode\":\"table\",\"display_fields\":[\"created\",\"title\",\"tag\",\"documenttype\"]},{\"id\":4,\"name\":\"Recently Added\",\"show_on_dashboard\":true,\"show_in_sidebar\":true,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[],\"owner\":\"2\",\"user_can_change\":true,\"page_size\":10,\"display_mode\":\"table\",\"display_fields\":[\"created\",\"title\",\"tag\",\"documenttype\"]},{\"id\":11,\"name\":\"Tag: Another Sample Tag\",\"show_on_dashboard\":false,\"show_in_sidebar\":true,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":6,\"value\":\"4\"}],\"owner\":\"2\",\"user_can_change\":true,\"page_size\":10,\"display_mode\":\"table\",\"display_fields\":[\"created\",\"title\",\"tag\",\"documenttype\"]},{\"id\":15,\"name\":\"View ASN not empty\",\"show_on_dashboard\":false,\"show_in_sidebar\":false,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":18,\"value\":\"false\"}],\"owner\":\"2\",\"user_can_change\":true,\"page_size\":10,\"display_mode\":\"table\",\"display_fields\":[\"created\",\"title\",\"tag\",\"documenttype\"]}]}"
+            "text": "{\"count\":6,\"next\":null,\"previous\":null,\"all\":[8,17,7,4,11,15],\"results\":[{\"id\":8,\"name\":\"Correspondent 2\",\"show_on_dashboard\":false,\"show_in_sidebar\":false,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":3,\"value\":\"2\"}],\"owner\":\"2\",\"user_can_change\":true},{\"id\":7,\"name\":\"Inbox\",\"show_on_dashboard\":true,\"show_in_sidebar\":true,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":6,\"value\":\"9\"}],\"owner\":\"2\",\"user_can_change\":true},{\"id\":11,\"name\":\"Tag: Another Sample Tag\",\"show_on_dashboard\":false,\"show_in_sidebar\":true,\"sort_field\":\"created\",\"sort_reverse\":true,\"filter_rules\":[{\"rule_type\":6,\"value\":\"4\"}],\"owner\":\"2\",\"user_can_change\":true}]}"
           },
           "headersSize": -1,
           "bodySize": -1,
@@ -236,7 +236,7 @@
           "content": {
             "size": -1,
             "mimeType": "application/json",
-            "text": "{\"documents_total\":61,\"documents_inbox\":8,\"inbox_tags\":[9],\"document_file_type_counts\":[{\"mime_type\":\"application/pdf\",\"mime_type_count\":57},{\"mime_type\":\"text/plain\",\"mime_type_count\":3},{\"mime_type\":\"text/csv\",\"mime_type_count\":1}],\"character_count\":2407053}"
+            "text": "{\"documents_total\":61,\"documents_inbox\":8,\"inbox_tag\":9,\"document_file_type_counts\":[{\"mime_type\":\"application/pdf\",\"mime_type_count\":57},{\"mime_type\":\"text/plain\",\"mime_type_count\":3},{\"mime_type\":\"text/csv\",\"mime_type_count\":1}],\"character_count\":2407053}"
           },
           "headersSize": -1,
           "bodySize": -1,

src-ui/e2e/document-detail/document-detail.spec.ts

@@ -12,9 +12,13 @@ test('should activate / deactivate save button when changes are saved', async ({
   await expect(page.getByTitle('Storage path', { exact: true })).toHaveText(
     /\w+/
   )
-  await expect(page.getByRole('button', { name: 'Save' }).nth(1)).toBeDisabled()
+  await expect(
+    page.getByRole('button', { name: 'Save', exact: true })
+  ).toBeDisabled()
   await page.getByTitle('Storage path').getByTitle('Clear all').click()
-  await expect(page.getByRole('button', { name: 'Save' }).nth(1)).toBeEnabled()
+  await expect(
+    page.getByRole('button', { name: 'Save', exact: true })
+  ).toBeEnabled()
 })
 
 test('should warn on unsaved changes', async ({ page }) => {
@@ -23,12 +27,16 @@ test('should warn on unsaved changes', async ({ page }) => {
   await expect(page.getByTitle('Correspondent', { exact: true })).toHaveText(
     /\w+/
   )
-  await expect(page.getByRole('button', { name: 'Save' }).nth(1)).toBeDisabled()
+  await expect(
+    page.getByRole('button', { name: 'Save', exact: true })
+  ).toBeDisabled()
   await page
     .getByTitle('Storage path', { exact: true })
     .getByTitle('Clear all')
     .click()
-  await expect(page.getByRole('button', { name: 'Save' }).nth(1)).toBeEnabled()
+  await expect(
+    page.getByRole('button', { name: 'Save', exact: true })
+  ).toBeEnabled()
   await page.getByRole('button', { name: 'Close', exact: true }).click()
   await expect(page.getByRole('dialog')).toHaveText(/unsaved changes/)
   await page.getByRole('button', { name: 'Cancel' }).click()

src-ui/e2e/document-list/document-list.spec.ts

@@ -45,8 +45,8 @@ test('basic filtering', async ({ page }) => {
 test('text filtering', async ({ page }) => {
   await page.routeFromHAR(REQUESTS_HAR2, { notFound: 'fallback' })
   await page.goto('/documents')
-  await page.getByRole('main').getByRole('combobox').click()
-  await page.getByRole('main').getByRole('combobox').fill('test')
+  await page.getByRole('textbox').click()
+  await page.getByRole('textbox').fill('test')
   await expect(page.locator('pngx-document-list')).toHaveText(/32 documents/)
   await expect(page).toHaveURL(/title_content=test/)
   await page.getByRole('button', { name: 'Title & content' }).click()
@@ -59,12 +59,12 @@ test('text filtering', async ({ page }) => {
   await expect(page.locator('pngx-document-list')).toHaveText(/26 documents/)
   await page.getByRole('button', { name: 'Advanced search' }).click()
   await page.getByRole('button', { name: 'ASN' }).click()
-  await page.getByRole('main').getByRole('combobox').nth(1).fill('1123')
+  await page.getByRole('textbox').fill('1123')
   await expect(page).toHaveURL(/archive_serial_number=1123/)
   await expect(page.locator('pngx-document-list')).toHaveText(/one document/i)
   await page.locator('select').selectOption('greater')
-  await page.getByRole('main').getByRole('combobox').nth(1).click()
-  await page.getByRole('main').getByRole('combobox').nth(1).fill('1123')
+  await page.getByRole('textbox').click()
+  await page.getByRole('textbox').fill('1123')
   await expect(page).toHaveURL(/archive_serial_number__gt=1123/)
   await expect(page.locator('pngx-document-list')).toHaveText(/5 documents/)
   await page.locator('select').selectOption('less')
@@ -81,11 +81,15 @@ test('text filtering', async ({ page }) => {
 test('date filtering', async ({ page }) => {
   await page.routeFromHAR(REQUESTS_HAR3, { notFound: 'fallback' })
   await page.goto('/documents')
-  await page.getByRole('button', { name: 'Dates' }).click()
-  await page.getByRole('menuitem', { name: 'Last 3 months' }).first().click()
+  await page.getByRole('button', { name: 'Created' }).click()
+  await page.getByRole('menuitem', { name: 'Last 3 months' }).click()
   await expect(page.locator('pngx-document-list')).toHaveText(/one document/i)
-  await page.getByRole('menuitem', { name: 'Last 3 months' }).first().click()
-  await page.getByLabel('Datesselected').getByRole('button').first().click()
+  await page.getByRole('button', { name: 'Created Clear selected' }).click()
+  await page.getByRole('button', { name: 'Created' }).click()
+  await page
+    .getByRole('menuitem', { name: 'After mm/dd/yyyy' })
+    .getByRole('button')
+    .click()
   await page.getByRole('combobox', { name: 'Select month' }).selectOption('12')
   await page.getByRole('combobox', { name: 'Select year' }).selectOption('2022')
   await page.getByText('11', { exact: true }).click()
@@ -127,18 +131,18 @@ test('sorting', async ({ page }) => {
   await page.getByRole('button', { name: 'Notes' }).click()
   await expect(page).toHaveURL(/sort=num_notes/)
   await page.getByRole('button', { name: 'Sort' }).click()
-  await page.locator('.w-100 > label > i-bs').first().click()
+  await page.locator('.w-100 > label > .toolbaricon').first().click()
   await expect(page).not.toHaveURL(/reverse=1/)
 })
 
 test('change views', async ({ page }) => {
   await page.routeFromHAR(REQUESTS_HAR5, { notFound: 'fallback' })
   await page.goto('/documents')
-  await page.locator('.btn-group label').first().click()
+  await page.locator('pngx-page-header label').first().click()
   await expect(page.locator('pngx-document-list table')).toBeVisible()
-  await page.locator('.btn-group label').nth(1).click()
+  await page.locator('pngx-page-header label').nth(1).click()
   await expect(page.locator('pngx-document-card-small').first()).toBeAttached()
-  await page.locator('.btn-group label').nth(2).click()
+  await page.locator('pngx-page-header label').nth(2).click()
   await expect(page.locator('pngx-document-card-large').first()).toBeAttached()
 })
 

src-ui/package.json

@@ -11,60 +11,56 @@
   },
   "private": true,
   "dependencies": {
-    "@angular/cdk": "^18.1.3",
-    "@angular/common": "~18.1.3",
-    "@angular/compiler": "~18.1.3",
-    "@angular/core": "~18.1.3",
-    "@angular/forms": "~18.1.3",
-    "@angular/localize": "~18.1.3",
-    "@angular/platform-browser": "~18.1.3",
-    "@angular/platform-browser-dynamic": "~18.1.3",
-    "@angular/router": "~18.1.3",
-    "@ng-bootstrap/ng-bootstrap": "^17.0.0",
-    "@ng-select/ng-select": "^13.5.0",
+    "@angular/cdk": "^16.2.11",
+    "@angular/common": "~16.2.11",
+    "@angular/compiler": "~16.2.11",
+    "@angular/core": "~16.2.11",
+    "@angular/forms": "~16.2.11",
+    "@angular/localize": "~16.2.11",
+    "@angular/platform-browser": "~16.2.11",
+    "@angular/platform-browser-dynamic": "~16.2.11",
+    "@angular/router": "~16.2.11",
+    "@ng-bootstrap/ng-bootstrap": "^15.1.2",
+    "@ng-select/ng-select": "^11.2.0",
     "@ngneat/dirty-check-forms": "^3.0.3",
     "@popperjs/core": "^2.11.8",
-    "bootstrap": "^5.3.3",
+    "bootstrap": "^5.3.2",
     "file-saver": "^2.0.5",
     "mime-names": "^1.0.0",
-    "ng2-pdf-viewer": "^10.2.2",
-    "ngx-bootstrap-icons": "^1.9.3",
+    "ng2-pdf-viewer": "^10.0.0",
     "ngx-color": "^9.0.0",
-    "ngx-cookie-service": "^18.0.0",
+    "ngx-cookie-service": "^16.0.1",
     "ngx-file-drop": "^16.0.0",
-    "ngx-ui-tour-ng-bootstrap": "^15.0.0",
+    "ngx-ui-tour-ng-bootstrap": "^13.0.6",
     "rxjs": "^7.8.1",
     "tslib": "^2.6.2",
-    "uuid": "^10.0.0",
-    "zone.js": "^0.14.8"
+    "uuid": "^9.0.1",
+    "zone.js": "^0.13.3"
   },
   "devDependencies": {
-    "@angular-builders/jest": "^18.0.0",
-    "@angular-devkit/build-angular": "^18.1.3",
-    "@angular-devkit/core": "^18.1.3",
-    "@angular-devkit/schematics": "^18.1.3",
-    "@angular-eslint/builder": "18.2.0",
-    "@angular-eslint/eslint-plugin": "18.2.0",
-    "@angular-eslint/eslint-plugin-template": "18.2.0",
-    "@angular-eslint/schematics": "18.2.0",
-    "@angular-eslint/template-parser": "18.2.0",
-    "@angular/cli": "~18.1.3",
-    "@angular/compiler-cli": "~18.1.3",
-    "@playwright/test": "^1.45.3",
-    "@types/jest": "^29.5.12",
-    "@types/node": "^22.0.2",
-    "@typescript-eslint/eslint-plugin": "^8.0.0",
-    "@typescript-eslint/parser": "^8.0.0",
-    "@typescript-eslint/utils": "^8.0.0",
+    "@angular-builders/jest": "16.0.1",
+    "@angular-devkit/build-angular": "~16.2.9",
+    "@angular-eslint/builder": "16.2.0",
+    "@angular-eslint/eslint-plugin": "16.2.0",
+    "@angular-eslint/eslint-plugin-template": "16.2.0",
+    "@angular-eslint/schematics": "16.2.0",
+    "@angular-eslint/template-parser": "16.2.0",
+    "@angular/cli": "~16.2.9",
+    "@angular/compiler-cli": "~16.2.3",
+    "@playwright/test": "^1.39.0",
+    "@types/jest": "^29.5.7",
+    "@types/node": "^20.8.10",
+    "@typescript-eslint/eslint-plugin": "^6.9.1",
+    "@typescript-eslint/parser": "^6.9.1",
     "concurrently": "^8.2.2",
-    "eslint": "^9.8.0",
+    "eslint": "^8.52.0",
     "jest": "29.7.0",
     "jest-environment-jsdom": "^29.7.0",
-    "jest-preset-angular": "^14.2.2",
+    "jest-preset-angular": "^13.1.1",
     "jest-websocket-mock": "^2.5.0",
     "patch-package": "^8.0.0",
     "ts-node": "~10.9.1",
-    "typescript": "^5.3.3",
-    "wait-on": "^7.2.0"
+    "typescript": "^5.1.6",
+    "wait-on": "^7.0.1"
   }
 }

src-ui/setup-jest.ts

@@ -23,7 +23,6 @@ import localeFi from '@angular/common/locales/fi'
 import localeFr from '@angular/common/locales/fr'
 import localeHu from '@angular/common/locales/hu'
 import localeIt from '@angular/common/locales/it'
-import localeJa from '@angular/common/locales/ja'
 import localeLb from '@angular/common/locales/lb'
 import localeNl from '@angular/common/locales/nl'
 import localeNo from '@angular/common/locales/no'
@@ -54,7 +53,6 @@ registerLocaleData(localeFi)
 registerLocaleData(localeFr)
 registerLocaleData(localeHu)
 registerLocaleData(localeIt)
-registerLocaleData(localeJa)
 registerLocaleData(localeLb)
 registerLocaleData(localeNl)
 registerLocaleData(localeNo)
@@ -76,16 +74,12 @@ const mock = () => {
   let storage: { [key: string]: string } = {}
   return {
     getItem: (key: string) => (key in storage ? storage[key] : null),
-    setItem: (key: string, value: string) => {
-      if (value.length > 1000000) throw new Error('localStorage overflow')
-      storage[key] = value || ''
-    },
+    setItem: (key: string, value: string) => (storage[key] = value || ''),
     removeItem: (key: string) => delete storage[key],
     clear: () => (storage = {}),
   }
 }
 
-Object.defineProperty(window, 'open', { value: jest.fn() })
 Object.defineProperty(window, 'localStorage', { value: mock() })
 Object.defineProperty(window, 'sessionStorage', { value: mock() })
 Object.defineProperty(window, 'getComputedStyle', {
@@ -98,10 +92,6 @@ Object.defineProperty(navigator, 'clipboard', {
 })
 Object.defineProperty(navigator, 'canShare', { value: () => true })
 Object.defineProperty(window, 'ResizeObserver', { value: mock() })
-Object.defineProperty(window, 'location', {
-  configurable: true,
-  value: { reload: jest.fn() },
-})
 
 HTMLCanvasElement.prototype.getContext = <
   typeof HTMLCanvasElement.prototype.getContext

src-ui/src/app/app-routing.module.ts

@@ -21,12 +21,10 @@ import {
   PermissionAction,
   PermissionType,
 } from './services/permissions.service'
-import { WorkflowsComponent } from './components/manage/workflows/workflows.component'
+import { ConsumptionTemplatesComponent } from './components/manage/consumption-templates/consumption-templates.component'
 import { MailComponent } from './components/manage/mail/mail.component'
 import { UsersAndGroupsComponent } from './components/admin/users-groups/users-groups.component'
 import { CustomFieldsComponent } from './components/manage/custom-fields/custom-fields.component'
-import { ConfigComponent } from './components/admin/config/config.component'
-import { TrashComponent } from './components/admin/trash/trash.component'
 
 export const routes: Routes = [
   { path: '', redirectTo: 'dashboard', pathMatch: 'full' },
@@ -141,18 +139,10 @@ export const routes: Routes = [
         path: 'logs',
         component: LogsComponent,
         canActivate: [PermissionsGuard],
-        data: {
-          requireAdmin: true,
-        },
-      },
-      {
-        path: 'trash',
-        component: TrashComponent,
-        canActivate: [PermissionsGuard],
         data: {
           requiredPermission: {
-            action: PermissionAction.Delete,
-            type: PermissionType.Document,
+            action: PermissionAction.View,
+            type: PermissionType.Admin,
           },
         },
       },
@@ -172,7 +162,7 @@ export const routes: Routes = [
         canActivate: [PermissionsGuard],
         data: {
           requiredPermission: {
-            action: PermissionAction.Change,
+            action: PermissionAction.View,
             type: PermissionType.UISettings,
           },
         },
@@ -189,17 +179,6 @@ export const routes: Routes = [
           },
         },
       },
-      {
-        path: 'config',
-        component: ConfigComponent,
-        canActivate: [PermissionsGuard],
-        data: {
-          requiredPermission: {
-            action: PermissionAction.Change,
-            type: PermissionType.AppConfig,
-          },
-        },
-      },
       {
         path: 'tasks',
         component: TasksComponent,
@@ -223,13 +202,13 @@ export const routes: Routes = [
         },
       },
       {
-        path: 'workflows',
-        component: WorkflowsComponent,
+        path: 'templates',
+        component: ConsumptionTemplatesComponent,
         canActivate: [PermissionsGuard],
         data: {
           requiredPermission: {
             action: PermissionAction.View,
-            type: PermissionType.Workflow,
+            type: PermissionType.ConsumptionTemplate,
           },
         },
       },

src-ui/src/app/app.component.html

@@ -1,36 +1,32 @@
 <pngx-toasts></pngx-toasts>
 
 <pngx-file-drop>
-  <ng-container content>
-    <router-outlet></router-outlet>
-  </ng-container>
+    <ng-container content>
+        <router-outlet></router-outlet>
+    </ng-container>
 </pngx-file-drop>
 
 <tour-step-template>
-  <ng-template #tourStep let-step="step">
-    <p class="tour-step-content" [innerHTML]="step?.content"></p>
-    <hr/>
-    <div class="d-flex justify-content-between align-items-center">
-      <span class="badge bg-light text-dark">{{ tourService.steps?.indexOf(step) + 1 }} / {{ tourService.steps?.length }}</span>
-      <div class="tour-step-navigation btn-toolbar" role="toolbar" aria-label="Controls">
-        <div class="btn-group btn-group-sm me-2" role="group" aria-label="Dismiss">
-          <button class="btn btn-outline-danger" (click)="tourService.end()">
-            {{ step?.endBtnTitle }}
-          </button>
+    <ng-template #tourStep let-step="step">
+        <p class="tour-step-content" [innerHTML]="step?.content"></p>
+        <hr/>
+        <div class="d-flex justify-content-between align-items-center">
+            <span class="badge bg-light text-dark">{{ tourService.steps?.indexOf(step) + 1 }} / {{ tourService.steps?.length }}</span>
+            <div class="tour-step-navigation btn-toolbar" role="toolbar" aria-label="Controls">
+                <div class="btn-group btn-group-sm me-2" role="group" aria-label="Dismiss">
+                    <button class="btn btn-outline-danger" (click)="tourService.end()">
+                        {{ step?.endBtnTitle }}
+                    </button>
+                </div>
+                <div class="btn-group btn-group-sm align-self-end" role="group" aria-label="Previous / Next">
+                    <button *ngIf="tourService.hasPrev(step)" class="btn btn-outline-primary" (click)="tourService.prev()">
+                        « {{ step?.prevBtnTitle }}
+                    </button>
+                    <button *ngIf="tourService.hasNext(step)" class="btn btn-outline-primary" (click)="tourService.next()">
+                        {{ step?.nextBtnTitle }} »
+                    </button>
+                </div>
+            </div>
         </div>
-        <div class="btn-group btn-group-sm align-self-end" role="group" aria-label="Previous / Next">
-          @if (tourService.hasPrev(step)) {
-            <button class="btn btn-outline-primary" (click)="tourService.prev()">
-              « {{ step?.prevBtnTitle }}
-            </button>
-          }
-          @if (tourService.hasNext(step)) {
-            <button class="btn btn-outline-primary" (click)="tourService.next()">
-              {{ step?.nextBtnTitle }} »
-            </button>
-          }
-        </div>
-      </div>
-    </div>
-  </ng-template>
+    </ng-template>
 </tour-step-template>

src-ui/src/app/app.component.spec.ts

@@ -1,11 +1,12 @@
-import { provideHttpClientTesting } from '@angular/common/http/testing'
+import { HttpClientTestingModule } from '@angular/common/http/testing'
 import {
   ComponentFixture,
   TestBed,
   fakeAsync,
   tick,
 } from '@angular/core/testing'
-import { Router, RouterModule } from '@angular/router'
+import { Router } from '@angular/router'
+import { RouterTestingModule } from '@angular/router/testing'
 import { TourService, TourNgBootstrapModule } from 'ngx-ui-tour-ng-bootstrap'
 import { Subject } from 'rxjs'
 import { routes } from './app-routing.module'
@@ -20,11 +21,6 @@ import { ToastService, Toast } from './services/toast.service'
 import { SettingsService } from './services/settings.service'
 import { FileDropComponent } from './components/file-drop/file-drop.component'
 import { NgxFileDropModule } from 'ngx-file-drop'
-import { NgbModalModule } from '@ng-bootstrap/ng-bootstrap'
-import { HotKeyService } from './services/hot-key.service'
-import { PermissionsGuard } from './guards/permissions.guard'
-import { DirtySavedViewGuard } from './guards/dirty-saved-view.guard'
-import { provideHttpClient, withInterceptorsFromDi } from '@angular/common/http'
 
 describe('AppComponent', () => {
   let component: AppComponent
@@ -35,22 +31,16 @@ describe('AppComponent', () => {
   let toastService: ToastService
   let router: Router
   let settingsService: SettingsService
-  let hotKeyService: HotKeyService
 
   beforeEach(async () => {
     TestBed.configureTestingModule({
       declarations: [AppComponent, ToastsComponent, FileDropComponent],
+      providers: [],
       imports: [
+        HttpClientTestingModule,
         TourNgBootstrapModule,
-        RouterModule.forRoot(routes),
+        RouterTestingModule.withRoutes(routes),
         NgxFileDropModule,
-        NgbModalModule,
-      ],
-      providers: [
-        PermissionsGuard,
-        DirtySavedViewGuard,
-        provideHttpClient(withInterceptorsFromDi()),
-        provideHttpClientTesting(),
       ],
     }).compileComponents()
 
@@ -60,7 +50,6 @@ describe('AppComponent', () => {
     settingsService = TestBed.inject(SettingsService)
     toastService = TestBed.inject(ToastService)
     router = TestBed.inject(Router)
-    hotKeyService = TestBed.inject(HotKeyService)
     fixture = TestBed.createComponent(AppComponent)
     component = fixture.componentInstance
   })
@@ -150,20 +139,4 @@ describe('AppComponent', () => {
     fileStatusSubject.next(new FileStatus())
     expect(toastSpy).toHaveBeenCalled()
   })
-
-  it('should support hotkeys', () => {
-    const addShortcutSpy = jest.spyOn(hotKeyService, 'addShortcut')
-    const routerSpy = jest.spyOn(router, 'navigate')
-    // prevent actual navigation
-    routerSpy.mockReturnValue(new Promise(() => {}))
-    jest.spyOn(permissionsService, 'currentUserCan').mockReturnValue(true)
-    component.ngOnInit()
-    expect(addShortcutSpy).toHaveBeenCalled()
-    document.dispatchEvent(new KeyboardEvent('keydown', { key: 'h' }))
-    expect(routerSpy).toHaveBeenCalledWith(['/dashboard'])
-    document.dispatchEvent(new KeyboardEvent('keydown', { key: 'd' }))
-    expect(routerSpy).toHaveBeenCalledWith(['/documents'])
-    document.dispatchEvent(new KeyboardEvent('keydown', { key: 's' }))
-    expect(routerSpy).toHaveBeenCalledWith(['/settings'])
-  })
 })

src-ui/src/app/app.component.ts

@@ -1,5 +1,5 @@
 import { SettingsService } from './services/settings.service'
-import { SETTINGS_KEYS } from './data/ui-settings'
+import { SETTINGS_KEYS } from './data/paperless-uisettings'
 import { Component, OnDestroy, OnInit, Renderer2 } from '@angular/core'
 import { Router } from '@angular/router'
 import { Subscription, first } from 'rxjs'
@@ -12,7 +12,6 @@ import {
   PermissionsService,
   PermissionType,
 } from './services/permissions.service'
-import { HotKeyService } from './services/hot-key.service'
 
 @Component({
   selector: 'pngx-root',
@@ -32,8 +31,7 @@ export class AppComponent implements OnInit, OnDestroy {
     private tasksService: TasksService,
     public tourService: TourService,
     private renderer: Renderer2,
-    private permissionsService: PermissionsService,
-    private hotKeyService: HotKeyService
+    private permissionsService: PermissionsService
   ) {
     let anyWindow = window as any
     anyWindow.pdfWorkerSrc = 'assets/js/pdf.worker.min.js'
@@ -127,36 +125,6 @@ export class AppComponent implements OnInit, OnDestroy {
         }
       })
 
-    this.hotKeyService
-      .addShortcut({ keys: 'h', description: $localize`Dashboard` })
-      .subscribe(() => {
-        this.router.navigate(['/dashboard'])
-      })
-    if (
-      this.permissionsService.currentUserCan(
-        PermissionAction.View,
-        PermissionType.Document
-      )
-    ) {
-      this.hotKeyService
-        .addShortcut({ keys: 'd', description: $localize`Documents` })
-        .subscribe(() => {
-          this.router.navigate(['/documents'])
-        })
-    }
-    if (
-      this.permissionsService.currentUserCan(
-        PermissionAction.Change,
-        PermissionType.UISettings
-      )
-    ) {
-      this.hotKeyService
-        .addShortcut({ keys: 's', description: $localize`Settings` })
-        .subscribe(() => {
-          this.router.navigate(['/settings'])
-        })
-    }
-
     const prevBtnTitle = $localize`Prev`
     const nextBtnTitle = $localize`Next`
     const endBtnTitle = $localize`End`
@@ -210,9 +178,9 @@ export class AppComponent implements OnInit, OnDestroy {
           },
         },
         {
-          anchorId: 'tour.workflows',
-          content: $localize`Workflows give you more control over the document pipeline.`,
-          route: '/workflows',
+          anchorId: 'tour.consumption-templates',
+          content: $localize`Consumption templates give you finer control over the document ingestion process.`,
+          route: '/templates',
           backdropConfig: {
             offset: 0,
           },

src-ui/src/app/app.module.ts

@@ -7,11 +7,7 @@ import {
   NgbDateParserFormatter,
   NgbModule,
 } from '@ng-bootstrap/ng-bootstrap'
-import {
-  HTTP_INTERCEPTORS,
-  provideHttpClient,
-  withInterceptorsFromDi,
-} from '@angular/common/http'
+import { HttpClientModule, HTTP_INTERCEPTORS } from '@angular/common/http'
 import { DocumentListComponent } from './components/document-list/document-list.component'
 import { DocumentDetailComponent } from './components/document-detail/document-detail.component'
 import { DashboardComponent } from './components/dashboard/dashboard.component'
@@ -35,7 +31,7 @@ import { ToastsComponent } from './components/common/toasts/toasts.component'
 import { FilterEditorComponent } from './components/document-list/filter-editor/filter-editor.component'
 import { FilterableDropdownComponent } from './components/common/filterable-dropdown/filterable-dropdown.component'
 import { ToggleableDropdownButtonComponent } from './components/common/filterable-dropdown/toggleable-dropdown-button/toggleable-dropdown-button.component'
-import { DatesDropdownComponent } from './components/common/dates-dropdown/dates-dropdown.component'
+import { DateDropdownComponent } from './components/common/date-dropdown/date-dropdown.component'
 import { DocumentCardLargeComponent } from './components/document-list/document-card-large/document-card-large.component'
 import { DocumentCardSmallComponent } from './components/document-list/document-card-small/document-card-small.component'
 import { BulkEditorComponent } from './components/document-list/bulk-editor/bulk-editor.component'
@@ -55,6 +51,7 @@ import { SavedViewWidgetComponent } from './components/dashboard/widgets/saved-v
 import { StatisticsWidgetComponent } from './components/dashboard/widgets/statistics-widget/statistics-widget.component'
 import { UploadFileWidgetComponent } from './components/dashboard/widgets/upload-file-widget/upload-file-widget.component'
 import { WidgetFrameComponent } from './components/dashboard/widgets/widget-frame/widget-frame.component'
+import { PdfViewerModule } from 'ng2-pdf-viewer'
 import { WelcomeWidgetComponent } from './components/dashboard/widgets/welcome-widget/welcome-widget.component'
 import { YesNoPipe } from './pipes/yes-no.pipe'
 import { FileSizePipe } from './pipes/file-size.pipe'
@@ -99,8 +96,8 @@ import { UsernamePipe } from './pipes/username.pipe'
 import { LogoComponent } from './components/common/logo/logo.component'
 import { IsNumberPipe } from './pipes/is-number.pipe'
 import { ShareLinksDropdownComponent } from './components/common/share-links-dropdown/share-links-dropdown.component'
-import { WorkflowsComponent } from './components/manage/workflows/workflows.component'
-import { WorkflowEditDialogComponent } from './components/common/edit-dialog/workflow-edit-dialog/workflow-edit-dialog.component'
+import { ConsumptionTemplatesComponent } from './components/manage/consumption-templates/consumption-templates.component'
+import { ConsumptionTemplateEditDialogComponent } from './components/common/edit-dialog/consumption-template-edit-dialog/consumption-template-edit-dialog.component'
 import { MailComponent } from './components/manage/mail/mail.component'
 import { UsersAndGroupsComponent } from './components/admin/users-groups/users-groups.component'
 import { DragDropModule } from '@angular/cdk/drag-drop'
@@ -108,228 +105,6 @@ import { FileDropComponent } from './components/file-drop/file-drop.component'
 import { CustomFieldsComponent } from './components/manage/custom-fields/custom-fields.component'
 import { CustomFieldEditDialogComponent } from './components/common/edit-dialog/custom-field-edit-dialog/custom-field-edit-dialog.component'
 import { CustomFieldsDropdownComponent } from './components/common/custom-fields-dropdown/custom-fields-dropdown.component'
-import { ProfileEditDialogComponent } from './components/common/profile-edit-dialog/profile-edit-dialog.component'
-import { PdfViewerModule } from 'ng2-pdf-viewer'
-import { DocumentLinkComponent } from './components/common/input/document-link/document-link.component'
-import { PreviewPopupComponent } from './components/common/preview-popup/preview-popup.component'
-import { SwitchComponent } from './components/common/input/switch/switch.component'
-import { ConfigComponent } from './components/admin/config/config.component'
-import { FileComponent } from './components/common/input/file/file.component'
-import { NgxBootstrapIconsModule } from 'ngx-bootstrap-icons'
-import { ConfirmButtonComponent } from './components/common/confirm-button/confirm-button.component'
-import { MonetaryComponent } from './components/common/input/monetary/monetary.component'
-import { SystemStatusDialogComponent } from './components/common/system-status-dialog/system-status-dialog.component'
-import { RotateConfirmDialogComponent } from './components/common/confirm-dialog/rotate-confirm-dialog/rotate-confirm-dialog.component'
-import { MergeConfirmDialogComponent } from './components/common/confirm-dialog/merge-confirm-dialog/merge-confirm-dialog.component'
-import { SplitConfirmDialogComponent } from './components/common/confirm-dialog/split-confirm-dialog/split-confirm-dialog.component'
-import { DocumentHistoryComponent } from './components/document-history/document-history.component'
-import { DragDropSelectComponent } from './components/common/input/drag-drop-select/drag-drop-select.component'
-import { CustomFieldDisplayComponent } from './components/common/custom-field-display/custom-field-display.component'
-import { GlobalSearchComponent } from './components/app-frame/global-search/global-search.component'
-import { HotkeyDialogComponent } from './components/common/hotkey-dialog/hotkey-dialog.component'
-import { DeletePagesConfirmDialogComponent } from './components/common/confirm-dialog/delete-pages-confirm-dialog/delete-pages-confirm-dialog.component'
-import { TrashComponent } from './components/admin/trash/trash.component'
-import {
-  airplane,
-  archive,
-  arrowClockwise,
-  arrowCounterclockwise,
-  arrowDown,
-  arrowLeft,
-  arrowRepeat,
-  arrowRight,
-  arrowRightShort,
-  arrowUpRight,
-  asterisk,
-  bodyText,
-  boxArrowUp,
-  boxArrowUpRight,
-  boxes,
-  calendar,
-  calendarEvent,
-  calendarEventFill,
-  cardChecklist,
-  cardHeading,
-  caretDown,
-  caretUp,
-  chatLeftText,
-  check,
-  check2All,
-  checkAll,
-  checkCircleFill,
-  checkLg,
-  chevronDoubleLeft,
-  chevronDoubleRight,
-  clipboard,
-  clipboardCheck,
-  clipboardCheckFill,
-  clipboardFill,
-  dash,
-  dashCircle,
-  diagram3,
-  dice5,
-  doorOpen,
-  download,
-  envelope,
-  envelopeAt,
-  exclamationCircleFill,
-  exclamationTriangle,
-  exclamationTriangleFill,
-  eye,
-  fileEarmark,
-  fileEarmarkCheck,
-  fileEarmarkFill,
-  fileEarmarkLock,
-  fileEarmarkMinus,
-  files,
-  fileText,
-  filter,
-  folder,
-  folderFill,
-  funnel,
-  gear,
-  grid,
-  gripVertical,
-  hash,
-  hddStack,
-  house,
-  infoCircle,
-  journals,
-  link,
-  listTask,
-  listUl,
-  pencil,
-  people,
-  peopleFill,
-  person,
-  personCircle,
-  personFill,
-  personFillLock,
-  personLock,
-  personSquare,
-  plus,
-  plusCircle,
-  questionCircle,
-  scissors,
-  search,
-  slashCircle,
-  sliders2Vertical,
-  sortAlphaDown,
-  sortAlphaUpAlt,
-  tagFill,
-  tag,
-  tags,
-  textIndentLeft,
-  textLeft,
-  threeDots,
-  threeDotsVertical,
-  trash,
-  uiRadios,
-  upcScan,
-  x,
-  xLg,
-} from 'ngx-bootstrap-icons'
-
-const icons = {
-  airplane,
-  archive,
-  arrowClockwise,
-  arrowCounterclockwise,
-  arrowDown,
-  arrowLeft,
-  arrowRepeat,
-  arrowRight,
-  arrowRightShort,
-  arrowUpRight,
-  asterisk,
-  bodyText,
-  boxArrowUp,
-  boxArrowUpRight,
-  boxes,
-  calendar,
-  calendarEvent,
-  calendarEventFill,
-  cardChecklist,
-  cardHeading,
-  caretDown,
-  caretUp,
-  chatLeftText,
-  check,
-  check2All,
-  checkAll,
-  checkCircleFill,
-  checkLg,
-  chevronDoubleLeft,
-  chevronDoubleRight,
-  clipboard,
-  clipboardCheck,
-  clipboardCheckFill,
-  clipboardFill,
-  dash,
-  dashCircle,
-  diagram3,
-  dice5,
-  doorOpen,
-  download,
-  envelope,
-  envelopeAt,
-  exclamationCircleFill,
-  exclamationTriangle,
-  exclamationTriangleFill,
-  eye,
-  fileEarmark,
-  fileEarmarkCheck,
-  fileEarmarkFill,
-  fileEarmarkLock,
-  fileEarmarkMinus,
-  files,
-  fileText,
-  filter,
-  folder,
-  folderFill,
-  funnel,
-  gear,
-  grid,
-  gripVertical,
-  hash,
-  hddStack,
-  house,
-  infoCircle,
-  journals,
-  link,
-  listTask,
-  listUl,
-  pencil,
-  people,
-  peopleFill,
-  person,
-  personCircle,
-  personFill,
-  personFillLock,
-  personLock,
-  personSquare,
-  plus,
-  plusCircle,
-  questionCircle,
-  scissors,
-  search,
-  slashCircle,
-  sliders2Vertical,
-  sortAlphaDown,
-  sortAlphaUpAlt,
-  tagFill,
-  tag,
-  tags,
-  textIndentLeft,
-  textLeft,
-  threeDots,
-  threeDotsVertical,
-  trash,
-  uiRadios,
-  upcScan,
-  x,
-  xLg,
-}
 
 import localeAf from '@angular/common/locales/af'
 import localeAr from '@angular/common/locales/ar'
@@ -346,7 +121,6 @@ import localeFi from '@angular/common/locales/fi'
 import localeFr from '@angular/common/locales/fr'
 import localeHu from '@angular/common/locales/hu'
 import localeIt from '@angular/common/locales/it'
-import localeJa from '@angular/common/locales/ja'
 import localeLb from '@angular/common/locales/lb'
 import localeNl from '@angular/common/locales/nl'
 import localeNo from '@angular/common/locales/no'
@@ -377,7 +151,6 @@ registerLocaleData(localeFi)
 registerLocaleData(localeFr)
 registerLocaleData(localeHu)
 registerLocaleData(localeIt)
-registerLocaleData(localeJa)
 registerLocaleData(localeLb)
 registerLocaleData(localeNl)
 registerLocaleData(localeNo)
@@ -426,7 +199,7 @@ function initializeApp(settings: SettingsService) {
     FilterEditorComponent,
     FilterableDropdownComponent,
     ToggleableDropdownButtonComponent,
-    DatesDropdownComponent,
+    DateDropdownComponent,
     DocumentCardLargeComponent,
     DocumentCardSmallComponent,
     BulkEditorComponent,
@@ -475,48 +248,28 @@ function initializeApp(settings: SettingsService) {
     LogoComponent,
     IsNumberPipe,
     ShareLinksDropdownComponent,
-    WorkflowsComponent,
-    WorkflowEditDialogComponent,
+    ConsumptionTemplatesComponent,
+    ConsumptionTemplateEditDialogComponent,
     MailComponent,
     UsersAndGroupsComponent,
     FileDropComponent,
     CustomFieldsComponent,
     CustomFieldEditDialogComponent,
     CustomFieldsDropdownComponent,
-    ProfileEditDialogComponent,
-    DocumentLinkComponent,
-    PreviewPopupComponent,
-    SwitchComponent,
-    ConfigComponent,
-    FileComponent,
-    ConfirmButtonComponent,
-    MonetaryComponent,
-    SystemStatusDialogComponent,
-    RotateConfirmDialogComponent,
-    MergeConfirmDialogComponent,
-    SplitConfirmDialogComponent,
-    DocumentHistoryComponent,
-    DragDropSelectComponent,
-    CustomFieldDisplayComponent,
-    GlobalSearchComponent,
-    HotkeyDialogComponent,
-    DeletePagesConfirmDialogComponent,
-    TrashComponent,
   ],
-  bootstrap: [AppComponent],
   imports: [
     BrowserModule,
     AppRoutingModule,
     NgbModule,
+    HttpClientModule,
     FormsModule,
     ReactiveFormsModule,
-    PdfViewerModule,
     NgxFileDropModule,
+    PdfViewerModule,
     NgSelectModule,
     ColorSliderModule,
     TourNgBootstrapModule,
     DragDropModule,
-    NgxBootstrapIconsModule.pick(icons),
   ],
   providers: [
     {
@@ -545,7 +298,7 @@ function initializeApp(settings: SettingsService) {
     DirtyDocGuard,
     DirtySavedViewGuard,
     UsernamePipe,
-    provideHttpClient(withInterceptorsFromDi()),
   ],
+  bootstrap: [AppComponent],
 })
 export class AppModule {}

src-ui/src/app/components/admin/config/config.component.html

@@ -1,59 +0,0 @@
-<pngx-page-header
-    title="Application Configuration"
-    i18n-title
-    info="Global app configuration options which apply to <strong>every</strong> user of this install of Paperless-ngx. Options can also be set using environment variables or the configuration file but the value here will always take precedence."
-    i18n-info
-    infoLink="configuration">
-</pngx-page-header>
-
-<form [formGroup]="configForm" (ngSubmit)="saveConfig()" class="pb-4">
-
-    <ul ngbNav #nav="ngbNav" class="nav-tabs">
-        @for (category of optionCategories; track category) {
-            <li [ngbNavItem]="category">
-                <a ngbNavLink>{{category}}</a>
-                <ng-template ngbNavContent>
-                    <div class="p-3">
-                        <div class="row row-cols-1 row-cols-md-2 row-cols-lg-3 g-2">
-                            @for (option of getCategoryOptions(category); track option.key) {
-                                <div class="col">
-                                    <div class="card bg-light">
-                                        <div class="card-body">
-                                            <div class="card-title">
-                                                <h6>
-                                                    {{option.title}}
-                                                    <a class="btn btn-sm btn-link" title="Read the documentation about this setting" i18n-title [href]="getDocsUrl(option.config_key)" target="_blank" referrerpolicy="no-referrer">
-                                                        <i-bs  name="info-circle"></i-bs>
-                                                    </a>
-                                                </h6>
-                                            </div>
-                                            <div class="mb-n3">
-                                                @switch (option.type) {
-                                                    @case (ConfigOptionType.Select) { <pngx-input-select [formControlName]="option.key" [error]="errors[option.key]" [items]="option.choices" [allowNull]="true"></pngx-input-select> }
-                                                    @case (ConfigOptionType.Number) { <pngx-input-number [formControlName]="option.key" [error]="errors[option.key]" [showAdd]="false"></pngx-input-number> }
-                                                    @case (ConfigOptionType.Boolean) { <pngx-input-switch [formControlName]="option.key" [error]="errors[option.key]" [showUnsetNote]="true" [horizontal]="true" title="Enable" i18n-title></pngx-input-switch> }
-                                                    @case (ConfigOptionType.String) { <pngx-input-text [formControlName]="option.key" [error]="errors[option.key]"></pngx-input-text> }
-                                                    @case (ConfigOptionType.JSON) { <pngx-input-text [formControlName]="option.key" [error]="errors[option.key]"></pngx-input-text> }
-                                                    @case (ConfigOptionType.File) { <pngx-input-file [formControlName]="option.key" (upload)="uploadFile($event, option.key)" [error]="errors[option.key]"></pngx-input-file> }
-                                                }
-                                            </div>
-                                        </div>
-                                    </div>
-                                </div>
-                            }
-                        </div>
-                    </div>
-                </ng-template>
-            </li>
-        }
-    </ul>
-    <div [ngbNavOutlet]="nav" class="border-start border-end border-bottom p-3 mb-3 shadow-sm"></div>
-    <div class="btn-toolbar" role="toolbar">
-        <div class="btn-group me-2">
-            <button type="button" (click)="discardChanges()" class="btn btn-secondary" [disabled]="loading || (isDirty$ | async) === false" i18n>Discard</button>
-        </div>
-        <div class="btn-group">
-            <button type="submit" class="btn btn-primary" [disabled]="loading || !configForm.valid || (isDirty$ | async) === false" i18n>Save</button>
-        </div>
-    </div>
-</form>

src-ui/src/app/components/admin/config/config.component.spec.ts

@@ -1,149 +0,0 @@
-import { ComponentFixture, TestBed } from '@angular/core/testing'
-
-import { ConfigComponent } from './config.component'
-import { ConfigService } from 'src/app/services/config.service'
-import { ToastService } from 'src/app/services/toast.service'
-import { of, throwError } from 'rxjs'
-import { OutputTypeConfig } from 'src/app/data/paperless-config'
-import { provideHttpClientTesting } from '@angular/common/http/testing'
-import { BrowserModule } from '@angular/platform-browser'
-import { NgbModule } from '@ng-bootstrap/ng-bootstrap'
-import { NgSelectModule } from '@ng-select/ng-select'
-import { TextComponent } from '../../common/input/text/text.component'
-import { NumberComponent } from '../../common/input/number/number.component'
-import { SwitchComponent } from '../../common/input/switch/switch.component'
-import { FormsModule, ReactiveFormsModule } from '@angular/forms'
-import { PageHeaderComponent } from '../../common/page-header/page-header.component'
-import { SelectComponent } from '../../common/input/select/select.component'
-import { FileComponent } from '../../common/input/file/file.component'
-import { SettingsService } from 'src/app/services/settings.service'
-import { NgxBootstrapIconsModule, allIcons } from 'ngx-bootstrap-icons'
-import { provideHttpClient, withInterceptorsFromDi } from '@angular/common/http'
-
-describe('ConfigComponent', () => {
-  let component: ConfigComponent
-  let fixture: ComponentFixture<ConfigComponent>
-  let configService: ConfigService
-  let toastService: ToastService
-  let settingService: SettingsService
-
-  beforeEach(async () => {
-    await TestBed.configureTestingModule({
-      declarations: [
-        ConfigComponent,
-        TextComponent,
-        SelectComponent,
-        NumberComponent,
-        SwitchComponent,
-        FileComponent,
-        PageHeaderComponent,
-      ],
-      imports: [
-        BrowserModule,
-        NgbModule,
-        NgSelectModule,
-        FormsModule,
-        ReactiveFormsModule,
-        NgxBootstrapIconsModule.pick(allIcons),
-      ],
-      providers: [
-        provideHttpClient(withInterceptorsFromDi()),
-        provideHttpClientTesting(),
-      ],
-    }).compileComponents()
-
-    configService = TestBed.inject(ConfigService)
-    toastService = TestBed.inject(ToastService)
-    settingService = TestBed.inject(SettingsService)
-    fixture = TestBed.createComponent(ConfigComponent)
-    component = fixture.componentInstance
-    fixture.detectChanges()
-  })
-
-  it('should load config on init, show error if necessary', () => {
-    const getSpy = jest.spyOn(configService, 'getConfig')
-    const errorSpy = jest.spyOn(toastService, 'showError')
-    getSpy.mockReturnValueOnce(
-      throwError(() => new Error('Error getting config'))
-    )
-    component.ngOnInit()
-    expect(getSpy).toHaveBeenCalled()
-    expect(errorSpy).toHaveBeenCalled()
-    getSpy.mockReturnValueOnce(
-      of({ output_type: OutputTypeConfig.PDF_A } as any)
-    )
-    component.ngOnInit()
-    expect(component.initialConfig).toEqual({
-      output_type: OutputTypeConfig.PDF_A,
-    })
-  })
-
-  it('should save config, show error if necessary', () => {
-    const saveSpy = jest.spyOn(configService, 'saveConfig')
-    const errorSpy = jest.spyOn(toastService, 'showError')
-    saveSpy.mockReturnValueOnce(
-      throwError(() => new Error('Error saving config'))
-    )
-    component.saveConfig()
-    expect(saveSpy).toHaveBeenCalled()
-    expect(errorSpy).toHaveBeenCalled()
-    saveSpy.mockReturnValueOnce(
-      of({ output_type: OutputTypeConfig.PDF_A } as any)
-    )
-    component.saveConfig()
-    expect(component.initialConfig).toEqual({
-      output_type: OutputTypeConfig.PDF_A,
-    })
-  })
-
-  it('should support discard changes', () => {
-    component.initialConfig = { output_type: OutputTypeConfig.PDF_A2 } as any
-    component.configForm.patchValue({ output_type: OutputTypeConfig.PDF_A })
-    component.discardChanges()
-    expect(component.configForm.get('output_type').value).toEqual(
-      OutputTypeConfig.PDF_A2
-    )
-  })
-
-  it('should support JSON validation for e.g. user_args', () => {
-    component.configForm.patchValue({ user_args: '{ foo bar }' })
-    expect(component.errors).toEqual({ user_args: 'Invalid JSON' })
-    component.configForm.patchValue({ user_args: '{ "foo": "bar" }' })
-    expect(component.errors).toEqual({ user_args: null })
-  })
-
-  it('should upload file, show error if necessary', () => {
-    const uploadSpy = jest.spyOn(configService, 'uploadFile')
-    const errorSpy = jest.spyOn(toastService, 'showError')
-    uploadSpy.mockReturnValueOnce(
-      throwError(() => new Error('Error uploading file'))
-    )
-    component.uploadFile(new File([], 'test.png'), 'app_logo')
-    expect(uploadSpy).toHaveBeenCalled()
-    expect(errorSpy).toHaveBeenCalled()
-    uploadSpy.mockReturnValueOnce(
-      of({ app_logo: 'https://example.com/logo/test.png' } as any)
-    )
-    component.uploadFile(new File([], 'test.png'), 'app_logo')
-    expect(component.initialConfig).toEqual({
-      app_logo: 'https://example.com/logo/test.png',
-    })
-  })
-
-  it('should refresh ui settings after save or upload', () => {
-    const saveSpy = jest.spyOn(configService, 'saveConfig')
-    const initSpy = jest.spyOn(settingService, 'initializeSettings')
-    saveSpy.mockReturnValueOnce(
-      of({ output_type: OutputTypeConfig.PDF_A } as any)
-    )
-    component.saveConfig()
-    expect(initSpy).toHaveBeenCalled()
-
-    const uploadSpy = jest.spyOn(configService, 'uploadFile')
-    uploadSpy.mockReturnValueOnce(
-      of({ app_logo: 'https://example.com/logo/test.png' } as any)
-    )
-    component.uploadFile(new File([], 'test.png'), 'app_logo')
-    expect(initSpy).toHaveBeenCalled()
-  })
-})

src-ui/src/app/components/admin/config/config.component.ts

@@ -1,189 +0,0 @@
-import { Component, OnDestroy, OnInit } from '@angular/core'
-import { AbstractControl, FormControl, FormGroup } from '@angular/forms'
-import {
-  BehaviorSubject,
-  Observable,
-  Subject,
-  Subscription,
-  first,
-  takeUntil,
-} from 'rxjs'
-import {
-  PaperlessConfigOptions,
-  ConfigCategory,
-  ConfigOption,
-  ConfigOptionType,
-  PaperlessConfig,
-} from 'src/app/data/paperless-config'
-import { ConfigService } from 'src/app/services/config.service'
-import { ToastService } from 'src/app/services/toast.service'
-import { ComponentWithPermissions } from '../../with-permissions/with-permissions.component'
-import { DirtyComponent, dirtyCheck } from '@ngneat/dirty-check-forms'
-import { SettingsService } from 'src/app/services/settings.service'
-
-@Component({
-  selector: 'pngx-config',
-  templateUrl: './config.component.html',
-  styleUrl: './config.component.scss',
-})
-export class ConfigComponent
-  extends ComponentWithPermissions
-  implements OnInit, OnDestroy, DirtyComponent
-{
-  public readonly ConfigOptionType = ConfigOptionType
-
-  // generated dynamically
-  public configForm = new FormGroup({})
-
-  public errors = {}
-
-  get optionCategories(): string[] {
-    return Object.values(ConfigCategory)
-  }
-
-  getCategoryOptions(category: string): ConfigOption[] {
-    return PaperlessConfigOptions.filter((o) => o.category === category)
-  }
-
-  public loading: boolean = false
-
-  initialConfig: PaperlessConfig
-  store: BehaviorSubject<any>
-  storeSub: Subscription
-  isDirty$: Observable<boolean>
-
-  private unsubscribeNotifier: Subject<any> = new Subject()
-
-  constructor(
-    private configService: ConfigService,
-    private toastService: ToastService,
-    private settingsService: SettingsService
-  ) {
-    super()
-    this.configForm.addControl('id', new FormControl())
-    PaperlessConfigOptions.forEach((option) => {
-      this.configForm.addControl(option.key, new FormControl())
-    })
-  }
-
-  ngOnInit(): void {
-    this.loading = true
-    this.configService
-      .getConfig()
-      .pipe(takeUntil(this.unsubscribeNotifier))
-      .subscribe({
-        next: (config) => {
-          this.loading = false
-          this.initialize(config)
-        },
-        error: (e) => {
-          this.loading = false
-          this.toastService.showError($localize`Error retrieving config`, e)
-        },
-      })
-
-    // validate JSON inputs
-    PaperlessConfigOptions.filter(
-      (o) => o.type === ConfigOptionType.JSON
-    ).forEach((option) => {
-      this.configForm
-        .get(option.key)
-        .addValidators((control: AbstractControl) => {
-          if (!control.value || control.value.toString().length === 0)
-            return null
-          try {
-            JSON.parse(control.value)
-          } catch (e) {
-            return [
-              {
-                user_args: e,
-              },
-            ]
-          }
-          return null
-        })
-      this.configForm.get(option.key).statusChanges.subscribe((status) => {
-        this.errors[option.key] =
-          status === 'INVALID' ? $localize`Invalid JSON` : null
-      })
-      this.configForm.get(option.key).updateValueAndValidity()
-    })
-  }
-
-  ngOnDestroy(): void {
-    this.unsubscribeNotifier.next(true)
-    this.unsubscribeNotifier.complete()
-  }
-
-  private initialize(config: PaperlessConfig) {
-    if (!this.store) {
-      this.store = new BehaviorSubject(config)
-
-      this.store
-        .asObservable()
-        .pipe(takeUntil(this.unsubscribeNotifier))
-        .subscribe((state) => {
-          this.configForm.patchValue(state, { emitEvent: false })
-        })
-
-      this.isDirty$ = dirtyCheck(this.configForm, this.store.asObservable())
-    }
-    this.configForm.patchValue(config)
-
-    this.initialConfig = config
-  }
-
-  getDocsUrl(key: string) {
-    return `https://docs.paperless-ngx.com/configuration/#${key}`
-  }
-
-  public saveConfig() {
-    this.loading = true
-    this.configService
-      .saveConfig(this.configForm.value as PaperlessConfig)
-      .pipe(takeUntil(this.unsubscribeNotifier), first())
-      .subscribe({
-        next: (config) => {
-          this.loading = false
-          this.initialize(config)
-          this.store.next(config)
-          this.settingsService.initializeSettings().subscribe()
-          this.toastService.showInfo($localize`Configuration updated`)
-        },
-        error: (e) => {
-          this.loading = false
-          this.toastService.showError(
-            $localize`An error occurred updating configuration`,
-            e
-          )
-        },
-      })
-  }
-
-  public discardChanges() {
-    this.configForm.reset(this.initialConfig)
-  }
-
-  public uploadFile(file: File, key: string) {
-    this.loading = true
-    this.configService
-      .uploadFile(file, this.configForm.value['id'], key)
-      .pipe(takeUntil(this.unsubscribeNotifier), first())
-      .subscribe({
-        next: (config) => {
-          this.loading = false
-          this.initialize(config)
-          this.store.next(config)
-          this.settingsService.initializeSettings().subscribe()
-          this.toastService.showInfo($localize`File successfully updated`)
-        },
-        error: (e) => {
-          this.loading = false
-          this.toastService.showError(
-            $localize`An error occurred uploading file`,
-            e
-          )
-        },
-      })
-  }
-}

src-ui/src/app/components/admin/logs/logs.component.html

@@ -1,44 +1,25 @@
-<pngx-page-header
-  title="Logs"
-  i18n-title
-  info="Review the log files for the application and for email checking."
-  i18n-info>
-  <div class="form-check form-switch">
-    <input class="form-check-input" type="checkbox" role="switch" id="autoRefreshSwitch" (click)="toggleAutoRefresh()" [attr.checked]="autoRefreshInterval">
-    <label class="form-check-label" for="autoRefreshSwitch" i18n>Auto refresh</label>
-  </div>
+<pngx-page-header title="Logs" i18n-title>
+
 </pngx-page-header>
 
 <ul ngbNav #nav="ngbNav" [(activeId)]="activeLog" (activeIdChange)="reloadLogs()" class="nav-tabs">
-  @for (logFile of logFiles; track logFile) {
-    <li [ngbNavItem]="logFile">
-      <a ngbNavLink>
-        {{logFile}}.log
-      </a>
-    </li>
-  }
-  @if (isLoading || !logFiles.length) {
-    <div class="ps-2 d-flex align-items-center">
-      <div class="spinner-border spinner-border-sm me-2" role="status"></div>
-      @if (!logFiles.length) {
-        <ng-container i18n>Loading...</ng-container>
-      }
-    </div>
-  }
+  <li *ngFor="let logFile of logFiles" [ngbNavItem]="logFile">
+    <a ngbNavLink>{{logFile}}.log</a>
+  </li>
+  <div *ngIf="isLoading && !logFiles.length" class="pb-2">
+    <div class="spinner-border spinner-border-sm me-2" role="status"></div>
+    <ng-container i18n>Loading...</ng-container>
+  </div>
 </ul>
 
 <div [ngbNavOutlet]="nav" class="mt-2"></div>
 
 <div class="bg-dark p-3 text-light font-monospace log-container" #logContainer>
-  @if (isLoading && logFiles.length) {
-    <div>
-      <div class="spinner-border spinner-border-sm me-2" role="status"></div>
-      <ng-container i18n>Loading...</ng-container>
-    </div>
-  }
-  @for (log of logs; track log) {
-    <p
-      class="m-0 p-0 log-entry-{{getLogLevel(log)}}"
-    >{{log}}</p>
-  }
+  <div *ngIf="isLoading && logFiles.length">
+    <div class="spinner-border spinner-border-sm me-2" role="status"></div>
+    <ng-container i18n>Loading...</ng-container>
+  </div>
+  <p
+    class="m-0 p-0 log-entry-{{getLogLevel(log)}}"
+    *ngFor="let log of logs">{{log}}</p>
 </div>

src-ui/src/app/components/admin/logs/logs.component.spec.ts

@@ -1,18 +1,11 @@
-import {
-  ComponentFixture,
-  TestBed,
-  fakeAsync,
-  tick,
-} from '@angular/core/testing'
+import { ComponentFixture, TestBed } from '@angular/core/testing'
 import { LogService } from 'src/app/services/rest/log.service'
 import { PageHeaderComponent } from '../../common/page-header/page-header.component'
 import { LogsComponent } from './logs.component'
 import { of, throwError } from 'rxjs'
-import { provideHttpClientTesting } from '@angular/common/http/testing'
+import { HttpClientTestingModule } from '@angular/common/http/testing'
 import { NgbModule, NgbNavLink } from '@ng-bootstrap/ng-bootstrap'
 import { BrowserModule, By } from '@angular/platform-browser'
-import { NgxBootstrapIconsModule, allIcons } from 'ngx-bootstrap-icons'
-import { provideHttpClient, withInterceptorsFromDi } from '@angular/common/http'
 
 const paperless_logs = [
   '[2023-05-29 03:05:01,224] [DEBUG] [paperless.tasks] Training data unchanged.',
@@ -33,20 +26,12 @@ describe('LogsComponent', () => {
   let fixture: ComponentFixture<LogsComponent>
   let logService: LogService
   let logSpy
-  let reloadSpy
 
   beforeEach(async () => {
     TestBed.configureTestingModule({
       declarations: [LogsComponent, PageHeaderComponent],
-      imports: [
-        BrowserModule,
-        NgbModule,
-        NgxBootstrapIconsModule.pick(allIcons),
-      ],
-      providers: [
-        provideHttpClient(withInterceptorsFromDi()),
-        provideHttpClientTesting(),
-      ],
+      providers: [],
+      imports: [HttpClientTestingModule, BrowserModule, NgbModule],
     }).compileComponents()
 
     logService = TestBed.inject(LogService)
@@ -57,9 +42,7 @@ describe('LogsComponent', () => {
     })
     fixture = TestBed.createComponent(LogsComponent)
     component = fixture.componentInstance
-    reloadSpy = jest.spyOn(component, 'reloadLogs')
     window.HTMLElement.prototype.scroll = function () {} // mock scroll
-    jest.useFakeTimers()
     fixture.detectChanges()
   })
 
@@ -85,14 +68,4 @@ describe('LogsComponent', () => {
     component.reloadLogs()
     expect(component.logs).toHaveLength(0)
   })
-
-  it('should auto refresh, allow toggle', () => {
-    jest.advanceTimersByTime(6000)
-    expect(reloadSpy).toHaveBeenCalledTimes(2)
-
-    component.toggleAutoRefresh()
-    expect(component.autoRefreshInterval).toBeNull()
-    jest.advanceTimersByTime(6000)
-    expect(reloadSpy).toHaveBeenCalledTimes(2)
-  })
 })

src-ui/src/app/components/admin/logs/logs.component.ts

@@ -2,9 +2,9 @@ import {
   Component,
   ElementRef,
   OnInit,
+  AfterViewChecked,
   ViewChild,
   OnDestroy,
-  ChangeDetectorRef,
 } from '@angular/core'
 import { Subject, takeUntil } from 'rxjs'
 import { LogService } from 'src/app/services/rest/log.service'
@@ -14,11 +14,8 @@ import { LogService } from 'src/app/services/rest/log.service'
   templateUrl: './logs.component.html',
   styleUrls: ['./logs.component.scss'],
 })
-export class LogsComponent implements OnInit, OnDestroy {
-  constructor(
-    private logService: LogService,
-    private changedetectorRef: ChangeDetectorRef
-  ) {}
+export class LogsComponent implements OnInit, AfterViewChecked, OnDestroy {
+  constructor(private logService: LogService) {}
 
   public logs: string[] = []
 
@@ -30,8 +27,6 @@ export class LogsComponent implements OnInit, OnDestroy {
 
   public isLoading: boolean = false
 
-  public autoRefreshInterval: any
-
   @ViewChild('logContainer') logContainer: ElementRef
 
   ngOnInit(): void {
@@ -46,14 +41,16 @@ export class LogsComponent implements OnInit, OnDestroy {
           this.activeLog = this.logFiles[0]
           this.reloadLogs()
         }
-        this.toggleAutoRefresh()
       })
   }
 
+  ngAfterViewChecked() {
+    this.scrollToBottom()
+  }
+
   ngOnDestroy(): void {
     this.unsubscribeNotifier.next(true)
     this.unsubscribeNotifier.complete()
-    clearInterval(this.autoRefreshInterval)
   }
 
   reloadLogs() {
@@ -65,7 +62,6 @@ export class LogsComponent implements OnInit, OnDestroy {
         next: (result) => {
           this.logs = result
           this.isLoading = false
-          this.scrollToBottom()
         },
         error: () => {
           this.logs = []
@@ -89,22 +85,10 @@ export class LogsComponent implements OnInit, OnDestroy {
   }
 
   scrollToBottom(): void {
-    this.changedetectorRef.detectChanges()
     this.logContainer?.nativeElement.scroll({
       top: this.logContainer.nativeElement.scrollHeight,
       left: 0,
       behavior: 'auto',
     })
   }
-
-  toggleAutoRefresh(): void {
-    if (this.autoRefreshInterval) {
-      clearInterval(this.autoRefreshInterval)
-      this.autoRefreshInterval = null
-    } else {
-      this.autoRefreshInterval = setInterval(() => {
-        this.reloadLogs()
-      }, 5000)
-    }
-  }
 }

src-ui/src/app/components/admin/settings/settings.component.html

@@ -1,36 +1,11 @@
-<pngx-page-header
-  title="Settings"
-  i18n-title
-  info="Options to customize appearance, notifications, saved views and more. Settings apply to the <strong>current user only</strong>."
-  i18n-info
-  >
-  <button class="btn btn-sm btn-outline-primary" (click)="tourService.start()">
-    <i-bs class="me-1" name="airplane"></i-bs>&nbsp;<ng-container i18n>Start tour</ng-container>
-  </button>
-  @if (permissionsService.isAdmin()) {
-    <button class="btn btn-sm btn-outline-primary position-relative ms-md-5 me-1" (click)="showSystemStatus()"
-      [disabled]="!systemStatus">
-      @if (!systemStatus) {
-        <div class="spinner-border spinner-border-sm me-1 h-75" role="status"></div>
-      } @else {
-        <i-bs class="me-2" name="card-checklist"></i-bs>
-        @if (systemStatusHasErrors) {
-          <span class="badge bg-body position-absolute top-0 start-100 translate-middle rounded-pill p-0">
-            <i-bs name="exclamation-circle-fill" class="text-danger" width="1.75em" height="1.75em"></i-bs>
-          </span>
-        } @else {
-          <span class="badge bg-body position-absolute top-0 start-100 translate-middle rounded-pill p-0">
-            <i-bs name="check-circle-fill" class="text-primary" width="1.75em" height="1.75em"></i-bs>
-          </span>
-        }
-      }
-      <ng-container i18n>System Status</ng-container>
-    </button>
-    <a class="btn btn-sm btn-primary" href="admin/" target="_blank">
+<pngx-page-header title="Settings" i18n-title>
+  <button class="btn btn-sm btn-outline-primary" (click)="tourService.start()"><ng-container i18n>Start tour</ng-container></button>
+  <a *pngxIfPermissions="{ action: PermissionAction.View, type: PermissionType.Admin }" class="btn btn-sm btn-primary ms-3" href="admin/" target="_blank">
       <ng-container i18n>Open Django Admin</ng-container>
-      &nbsp;<i-bs name="arrow-up-right"></i-bs>
-    </a>
-  }
+      <svg class="sidebaricon ms-1" fill="currentColor">
+        <use xlink:href="assets/bootstrap-icons.svg#arrow-up-right"/>
+      </svg>
+  </a>
 </pngx-page-header>
 
 <form [formGroup]="settingsForm" (ngSubmit)="saveSettings()">
@@ -49,16 +24,10 @@
           <div class="col">
 
             <select class="form-select" formControlName="displayLanguage">
-              @for (lang of displayLanguageOptions; track lang) {
-                <option [ngValue]="lang.code">{{lang.name}}@if (lang.code && currentLocale !== 'en-US') {
-                  <span> - {{lang.englishName}}</span>
-                }</option>
-              }
+              <option *ngFor="let lang of displayLanguageOptions" [ngValue]="lang.code">{{lang.name}}<span *ngIf="lang.code && currentLocale !== 'en-US'"> - {{lang.englishName}}</span></option>
             </select>
 
-            @if (displayLanguageIsDirty) {
-              <small class="form-text text-primary" i18n>You need to reload the page after applying a new language.</small>
-            }
+            <small *ngIf="displayLanguageIsDirty" class="form-text text-primary" i18n>You need to reload the page after applying a new language.</small>
 
           </div>
         </div>
@@ -70,11 +39,7 @@
           <div class="col">
 
             <select class="form-select" formControlName="dateLocale">
-              @for (lang of dateLocaleOptions; track lang) {
-                <option [ngValue]="lang.code">{{lang.name}}@if (lang.code) {
-                  <span> - {{today | customDate:'shortDate':null:lang.code}}</span>
-                }</option>
-              }
+              <option *ngFor="let lang of dateLocaleOptions" [ngValue]="lang.code">{{lang.name}}<span *ngIf="lang.code"> - {{today | customDate:'shortDate':null:lang.code}}</span></option>
             </select>
 
           </div>
@@ -160,7 +125,9 @@
           </div>
           <div class="col-2">
             <button class="btn btn-link btn-sm pt-2 ps-0" [disabled]="!this.settingsForm.get('themeColor').value" (click)="clearThemeColor()">
-              <i-bs width="1em" height="1em" name="x"></i-bs><ng-container i18n>Reset</ng-container>
+              <svg fill="currentColor" class="buttonicon-sm me-1">
+                <use xlink:href="assets/bootstrap-icons.svg#x"/>
+              </svg><ng-container i18n>Reset</ng-container>
             </button>
           </div>
         </div>
@@ -170,57 +137,25 @@
         <div class="row mb-3">
           <div class="offset-md-3 col">
             <p i18n>
-            Update checking works by pinging the public <a href="https://api.github.com/repos/paperless-ngx/paperless-ngx/releases/latest" target="_blank" rel="noopener noreferrer">GitHub API</a> for the latest release to determine whether a new version is available.<br/>
-            Actual updating of the app must still be performed manually.
-          </p>
+              Update checking works by pinging the public <a href="https://api.github.com/repos/paperless-ngx/paperless-ngx/releases/latest" target="_blank" rel="noopener noreferrer">GitHub API</a> for the latest release to determine whether a new version is available.<br/>
+              Actual updating of the app must still be performed manually.
+            </p>
             <p i18n>
-            <em>No tracking data is collected by the app in any way.</em>
-          </p>
+              <em>No tracking data is collected by the app in any way.</em>
+            </p>
             <pngx-input-check i18n-title title="Enable update checking" formControlName="updateCheckingEnabled"></pngx-input-check>
           </div>
         </div>
 
-        <h4 class="mt-4" i18n>Document editing</h4>
-
-        <div class="row mb-3">
-          <div class="offset-md-3 col">
-            <pngx-input-check i18n-title title="Automatically remove inbox tag(s) on save" formControlName="documentEditingRemoveInboxTags"></pngx-input-check>
-          </div>
-        </div>
-
         <h4 class="mt-4" i18n>Bulk editing</h4>
 
         <div class="row mb-3">
           <div class="offset-md-3 col">
-            <pngx-input-check i18n-title title="Show confirmation dialogs" formControlName="bulkEditConfirmationDialogs"></pngx-input-check>
+            <pngx-input-check i18n-title title="Show confirmation dialogs" formControlName="bulkEditConfirmationDialogs" i18n-hint hint="Deleting documents will always ask for confirmation."></pngx-input-check>
             <pngx-input-check i18n-title title="Apply on close" formControlName="bulkEditApplyOnClose"></pngx-input-check>
           </div>
         </div>
 
-        <h4 class="mt-4" i18n>Global search</h4>
-
-        <div class="row mb-3">
-          <div class="offset-md-3 col">
-            <pngx-input-check i18n-title title="Do not include advanced search results" formControlName="searchDbOnly"></pngx-input-check>
-          </div>
-        </div>
-
-        <div class="row mb-3">
-          <div class="offset-md-3 col">
-            <div class="row">
-              <div class="col-md-2 col-form-label pt-0">
-                <span i18n>Full search links to</span>
-              </div>
-              <div class="col">
-                <select class="form-select" formControlName="searchLink">
-                  <option [ngValue]="GlobalSearchType.TITLE_CONTENT" i18n>Title and content search</option>
-                  <option [ngValue]="GlobalSearchType.ADVANCED" i18n>Advanced search</option>
-                </select>
-              </div>
-            </div>
-          </div>
-        </div>
-
         <h4 class="mt-4" i18n>Notes</h4>
 
         <div class="row mb-3">
@@ -241,15 +176,15 @@
         <div class="row mb-3">
           <div class="offset-md-3 col">
             <p i18n>
-            Settings apply to this user account for objects (Tags, Mail Rules, etc.) created via the web UI
-          </p>
+              Settings apply to this user account for objects (Tags, Mail Rules, etc.) created via the web UI
+            </p>
           </div>
         </div>
         <div class="row mb-3">
           <div class="col-md-3 col-form-label pt-0">
             <span i18n>Default Owner</span>
           </div>
-          <div class="col-md-5">
+          <div class="col-md-4">
             <pngx-input-select [items]="users" bindLabel="username" formControlName="defaultPermsOwner" [allowNull]="true"></pngx-input-select>
             <small class="form-text text-muted text-end d-block mt-n2" i18n>Objects without an owner can be viewed and edited by all users</small>
           </div>
@@ -258,9 +193,9 @@
           <div class="col-md-3 col-form-label pt-0">
             <span i18n>Default View Permissions</span>
           </div>
-          <div class="col-md-5">
+          <div class="col-md-4">
             <div class="row">
-              <div class="col-3">
+              <div class="col-2">
                 <span class="d-block pt-1" i18n>Users:</span>
               </div>
               <div class="col">
@@ -270,7 +205,7 @@
               </div>
             </div>
             <div class="row">
-              <div class="col-3">
+              <div class="col-2">
                 <span class="d-block pt-1" i18n>Groups:</span>
               </div>
               <div class="col">
@@ -285,9 +220,9 @@
           <div class="col-md-3 col-form-label pt-0">
             <span i18n>Default Edit Permissions</span>
           </div>
-          <div class="col-md-5">
+          <div class="col-md-4">
             <div class="row">
-              <div class="col-3">
+              <div class="col-2">
                 <span class="d-block pt-1" i18n>Users:</span>
               </div>
               <div class="col">
@@ -297,7 +232,7 @@
               </div>
             </div>
             <div class="row">
-              <div class="col-3">
+              <div class="col-2">
                 <span class="d-block pt-1" i18n>Groups:</span>
               </div>
               <div class="col">
@@ -344,71 +279,40 @@
         </div>
 
         <h4 i18n>Views</h4>
-        <ul class="list-group" formGroupName="savedViews">
+        <div formGroupName="savedViews">
 
-          @for (view of savedViews; track view) {
-            <li class="list-group-item py-3">
-            <div [formGroupName]="view.id">
-              <div class="row">
-                <div class="col">
-                  <pngx-input-text title="Name" formControlName="name"></pngx-input-text>
+            <div *ngFor="let view of savedViews" [formGroupName]="view.id" class="row">
+              <div class="mb-3 col">
+                <label class="form-label" for="name_{{view.id}}" i18n>Name</label>
+                <input type="text" class="form-control" formControlName="name" id="name_{{view.id}}">
+              </div>
+
+              <div class="mb-2 col">
+                <label class="form-label" for="show_on_dashboard_{{view.id}}" i18n>&nbsp;<span class="visually-hidden">Appears on</span></label>
+                <div class="form-check form-switch">
+                  <input type="checkbox" class="form-check-input" id="show_on_dashboard_{{view.id}}" formControlName="show_on_dashboard">
+                  <label class="form-check-label" for="show_on_dashboard_{{view.id}}" i18n>Show on dashboard</label>
                 </div>
-                <div class="col">
-                  <div class="form-check form-switch mt-3">
-                    <input type="checkbox" class="form-check-input" id="show_on_dashboard_{{view.id}}" formControlName="show_on_dashboard">
-                    <label class="form-check-label" for="show_on_dashboard_{{view.id}}" i18n>Show on dashboard</label>
-                  </div>
-                  <div class="form-check form-switch">
-                    <input type="checkbox" class="form-check-input" id="show_in_sidebar_{{view.id}}" formControlName="show_in_sidebar">
-                    <label class="form-check-label" for="show_in_sidebar_{{view.id}}" i18n>Show in sidebar</label>
-                  </div>
-                </div>
-                <div class="col-auto">
-                  <label class="form-label" for="name_{{view.id}}" i18n>Actions</label>
-                  <pngx-confirm-button
-                    label="Delete"
-                    i18n-label
-                    (confirm)="deleteSavedView(view)"
-                    *pngxIfPermissions="{ action: PermissionAction.Delete, type: PermissionType.SavedView }"
-                    buttonClasses="btn-sm btn-outline-danger form-control"
-                    iconName="trash">
-                  </pngx-confirm-button>
+                <div class="form-check form-switch">
+                  <input type="checkbox" class="form-check-input" id="show_in_sidebar_{{view.id}}" formControlName="show_in_sidebar">
+                  <label class="form-check-label" for="show_in_sidebar_{{view.id}}" i18n>Show in sidebar</label>
                 </div>
               </div>
-              <div class="row">
-                <div class="col">
-                  <pngx-input-number i18n-title title="Documents page size" [showAdd]="false" formControlName="page_size"></pngx-input-number>
-                </div>
-                <div class="col">
-                  <label class="form-label" for="display_mode_{{view.id}}" i18n>Display as</label>
-                  <select class="form-select" formControlName="display_mode">
-                    <option [ngValue]="DisplayMode.TABLE" i18n>Table</option>
-                    <option [ngValue]="DisplayMode.SMALL_CARDS" i18n>Small Cards</option>
-                    <option [ngValue]="DisplayMode.LARGE_CARDS" i18n>Large Cards</option>
-                  </select>
-                </div>
-                  @if (displayFields) {
-                    <pngx-input-drag-drop-select i18n-title title="Show" i18n-emptyText emptyText="Default" [items]="displayFields" formControlName="display_fields"></pngx-input-drag-drop-select>
-                  }
-                </div>
+
+              <div class="mb-2 col-auto">
+                <label class="form-label" for="name_{{view.id}}" i18n>Actions</label>
+                <button type="button" class="btn btn-sm btn-outline-danger form-control" (click)="deleteSavedView(view)" *pngxIfPermissions="{ action: PermissionAction.Delete, type: PermissionType.SavedView }" i18n>Delete</button>
+              </div>
             </div>
-            </li>
-          }
 
-          @if (savedViews && savedViews.length === 0) {
-            <li class="list-group-item">
-              <div i18n>No saved views defined.</div>
-            </li>
-          }
+            <div *ngIf="savedViews && savedViews.length === 0" i18n>No saved views defined.</div>
 
-          @if (!savedViews) {
-            <li class="list-group-item">
+            <div *ngIf="!savedViews">
               <div class="spinner-border spinner-border-sm fw-normal ms-2 me-auto" role="status"></div>
               <div class="visually-hidden" i18n>Loading...</div>
-            </li>
-          }
+            </div>
 
-        </ul>
+        </div>
 
       </ng-template>
     </li>
@@ -416,6 +320,5 @@
 
   <div [ngbNavOutlet]="nav" class="border-start border-end border-bottom p-3 mb-3 shadow-sm"></div>
 
-  <button type="submit" class="btn btn-primary mb-2" [disabled]="(isDirty$ | async) === false" i18n>Save</button>
-  <button type="button" (click)="reset()" class="btn btn-secondary ms-2 mb-2" [disabled]="(isDirty$ | async) === false" i18n>Cancel</button>
+  <button type="submit" class="btn btn-primary mb-2" *pngxIfPermissions="{ action: PermissionAction.Change, type: PermissionType.UISettings }" [disabled]="(isDirty$ | async) === false" i18n>Save</button>
 </form>

src-ui/src/app/components/admin/settings/settings.component.spec.ts

@@ -1,5 +1,5 @@
 import { ViewportScroller, DatePipe } from '@angular/common'
-import { provideHttpClientTesting } from '@angular/common/http/testing'
+import { HttpClientTestingModule } from '@angular/common/http/testing'
 import { ComponentFixture, TestBed } from '@angular/core/testing'
 import { FormsModule, ReactiveFormsModule } from '@angular/forms'
 import { By } from '@angular/platform-browser'
@@ -9,14 +9,12 @@ import {
   NgbModule,
   NgbAlertModule,
   NgbNavLink,
-  NgbModal,
-  NgbModalModule,
 } from '@ng-bootstrap/ng-bootstrap'
 import { NgSelectModule } from '@ng-select/ng-select'
 import { of, throwError } from 'rxjs'
 import { routes } from 'src/app/app-routing.module'
-import { SavedView } from 'src/app/data/saved-view'
-import { SETTINGS_KEYS } from 'src/app/data/ui-settings'
+import { PaperlessSavedView } from 'src/app/data/paperless-saved-view'
+import { SETTINGS_KEYS } from 'src/app/data/paperless-uisettings'
 import { IfPermissionsDirective } from 'src/app/directives/if-permissions.directive'
 import { PermissionsGuard } from 'src/app/guards/permissions.guard'
 import { CustomDatePipe } from 'src/app/pipes/custom-date.pipe'
@@ -39,18 +37,6 @@ import { TextComponent } from '../../common/input/text/text.component'
 import { PageHeaderComponent } from '../../common/page-header/page-header.component'
 import { SettingsComponent } from './settings.component'
 import { IfOwnerDirective } from 'src/app/directives/if-owner.directive'
-import { NgxBootstrapIconsModule, allIcons } from 'ngx-bootstrap-icons'
-import { ConfirmButtonComponent } from '../../common/confirm-button/confirm-button.component'
-import { SystemStatusDialogComponent } from '../../common/system-status-dialog/system-status-dialog.component'
-import { SystemStatusService } from 'src/app/services/system-status.service'
-import {
-  SystemStatus,
-  InstallType,
-  SystemStatusItemStatus,
-} from 'src/app/data/system-status'
-import { DragDropSelectComponent } from '../../common/input/drag-drop-select/drag-drop-select.component'
-import { DragDropModule } from '@angular/cdk/drag-drop'
-import { provideHttpClient, withInterceptorsFromDi } from '@angular/common/http'
 
 const savedViews = [
   { id: 1, name: 'view1', show_in_sidebar: true, show_on_dashboard: true },
@@ -77,8 +63,6 @@ describe('SettingsComponent', () => {
   let userService: UserService
   let permissionsService: PermissionsService
   let groupService: GroupService
-  let modalService: NgbModal
-  let systemStatusService: SystemStatusService
 
   beforeEach(async () => {
     TestBed.configureTestingModule({
@@ -98,26 +82,16 @@ describe('SettingsComponent', () => {
         PermissionsUserComponent,
         PermissionsGroupComponent,
         IfOwnerDirective,
-        ConfirmButtonComponent,
-        DragDropSelectComponent,
       ],
+      providers: [CustomDatePipe, DatePipe, PermissionsGuard],
       imports: [
         NgbModule,
+        HttpClientTestingModule,
         RouterTestingModule.withRoutes(routes),
         FormsModule,
         ReactiveFormsModule,
         NgbAlertModule,
         NgSelectModule,
-        NgxBootstrapIconsModule.pick(allIcons),
-        NgbModalModule,
-        DragDropModule,
-      ],
-      providers: [
-        CustomDatePipe,
-        DatePipe,
-        PermissionsGuard,
-        provideHttpClient(withInterceptorsFromDi()),
-        provideHttpClientTesting(),
       ],
     }).compileComponents()
 
@@ -129,8 +103,6 @@ describe('SettingsComponent', () => {
     settingsService.currentUser = users[0]
     userService = TestBed.inject(UserService)
     permissionsService = TestBed.inject(PermissionsService)
-    modalService = TestBed.inject(NgbModal)
-    systemStatusService = TestBed.inject(SystemStatusService)
     jest.spyOn(permissionsService, 'currentUserCan').mockReturnValue(true)
     jest
       .spyOn(permissionsService, 'currentUserHasObjectPermissions')
@@ -166,7 +138,7 @@ describe('SettingsComponent', () => {
         of({
           all: savedViews.map((v) => v.id),
           count: savedViews.length,
-          results: (savedViews as SavedView[]).concat([]),
+          results: (savedViews as PaperlessSavedView[]).concat([]),
         })
       )
     }
@@ -254,7 +226,9 @@ describe('SettingsComponent', () => {
     savedViewPatchSpy.mockClear()
 
     // succeed saved views
-    savedViewPatchSpy.mockReturnValueOnce(of(savedViews as SavedView[]))
+    savedViewPatchSpy.mockReturnValueOnce(
+      of(savedViews as PaperlessSavedView[])
+    )
     component.saveSettings()
     expect(toastErrorSpy).not.toHaveBeenCalled()
     expect(savedViewPatchSpy).toHaveBeenCalled()
@@ -315,7 +289,7 @@ describe('SettingsComponent', () => {
     expect(toastErrorSpy).toHaveBeenCalled()
     expect(storeSpy).toHaveBeenCalled()
     expect(appearanceSettingsSpy).not.toHaveBeenCalled()
-    expect(setSpy).toHaveBeenCalledTimes(27)
+    expect(setSpy).toHaveBeenCalledTimes(24)
 
     // succeed
     storeSpy.mockReturnValueOnce(of(true))
@@ -333,15 +307,10 @@ describe('SettingsComponent', () => {
     component.store.getValue()['displayLanguage'] = 'en-US'
     component.store.getValue()['updateCheckingEnabled'] = false
     component.settingsForm.value.displayLanguage = 'en-GB'
-    jest.spyOn(settingsService, 'storeSettings').mockReturnValue(of(true))
-    component.saveSettings()
-    expect(toast.actionName).toEqual('Reload now')
-
     component.settingsForm.value.updateCheckingEnabled = true
+    jest.spyOn(settingsService, 'storeSettings').mockReturnValueOnce(of(true))
     component.saveSettings()
-
     expect(toast.actionName).toEqual('Reload now')
-    toast.action()
   })
 
   it('should allow setting theme color, visually apply change immediately but not save', () => {
@@ -366,7 +335,7 @@ describe('SettingsComponent', () => {
     const toastSpy = jest.spyOn(toastService, 'showInfo')
     const deleteSpy = jest.spyOn(savedViewService, 'delete')
     deleteSpy.mockReturnValue(of(true))
-    component.deleteSavedView(savedViews[0] as SavedView)
+    component.deleteSavedView(savedViews[0] as PaperlessSavedView)
     expect(deleteSpy).toHaveBeenCalled()
     expect(toastSpy).toHaveBeenCalledWith(
       `Saved view "${savedViews[0].name}" deleted.`
@@ -396,62 +365,4 @@ describe('SettingsComponent', () => {
     fixture.detectChanges()
     expect(toastErrorSpy).toBeCalled()
   })
-
-  it('should load system status on initialize, show errors if needed', () => {
-    const status: SystemStatus = {
-      pngx_version: '2.4.3',
-      server_os: 'macOS-14.1.1-arm64-arm-64bit',
-      install_type: InstallType.BareMetal,
-      storage: { total: 494384795648, available: 13573525504 },
-      database: {
-        type: 'sqlite',
-        url: '/paperless-ngx/data/db.sqlite3',
-        status: SystemStatusItemStatus.ERROR,
-        error: null,
-        migration_status: {
-          latest_migration: 'socialaccount.0006_alter_socialaccount_extra_data',
-          unapplied_migrations: [],
-        },
-      },
-      tasks: {
-        redis_url: 'redis://localhost:6379',
-        redis_status: SystemStatusItemStatus.ERROR,
-        redis_error:
-          'Error 61 connecting to localhost:6379. Connection refused.',
-        celery_status: SystemStatusItemStatus.ERROR,
-        index_status: SystemStatusItemStatus.OK,
-        index_last_modified: new Date().toISOString(),
-        index_error: null,
-        classifier_status: SystemStatusItemStatus.OK,
-        classifier_last_trained: new Date().toISOString(),
-        classifier_error: null,
-      },
-    }
-    jest.spyOn(systemStatusService, 'get').mockReturnValue(of(status))
-    jest.spyOn(permissionsService, 'isAdmin').mockReturnValue(true)
-    completeSetup()
-    expect(component['systemStatus']).toEqual(status) // private
-    expect(component.systemStatusHasErrors).toBeTruthy()
-    // coverage
-    component['systemStatus'].database.status = SystemStatusItemStatus.OK
-    component['systemStatus'].tasks.redis_status = SystemStatusItemStatus.OK
-    component['systemStatus'].tasks.celery_status = SystemStatusItemStatus.OK
-    expect(component.systemStatusHasErrors).toBeFalsy()
-  })
-
-  it('should open system status dialog', () => {
-    const modalOpenSpy = jest.spyOn(modalService, 'open')
-    completeSetup()
-    component.showSystemStatus()
-    expect(modalOpenSpy).toHaveBeenCalledWith(SystemStatusDialogComponent, {
-      size: 'xl',
-    })
-  })
-
-  it('should support reset', () => {
-    completeSetup()
-    component.settingsForm.get('themeColor').setValue('#ff0000')
-    component.reset()
-    expect(component.settingsForm.get('themeColor').value).toEqual('')
-  })
 })

src-ui/src/app/components/admin/settings/settings.component.ts

@@ -9,11 +9,7 @@ import {
 } from '@angular/core'
 import { FormGroup, FormControl } from '@angular/forms'
 import { ActivatedRoute, Router } from '@angular/router'
-import {
-  NgbModal,
-  NgbModalRef,
-  NgbNavChangeEvent,
-} from '@ng-bootstrap/ng-bootstrap'
+import { NgbNavChangeEvent } from '@ng-bootstrap/ng-bootstrap'
 import { DirtyComponent, dirtyCheck } from '@ngneat/dirty-check-forms'
 import { TourService } from 'ngx-ui-tour-ng-bootstrap'
 import {
@@ -25,10 +21,10 @@ import {
   takeUntil,
   tap,
 } from 'rxjs'
-import { Group } from 'src/app/data/group'
-import { SavedView } from 'src/app/data/saved-view'
-import { GlobalSearchType, SETTINGS_KEYS } from 'src/app/data/ui-settings'
-import { User } from 'src/app/data/user'
+import { PaperlessGroup } from 'src/app/data/paperless-group'
+import { PaperlessSavedView } from 'src/app/data/paperless-saved-view'
+import { SETTINGS_KEYS } from 'src/app/data/paperless-uisettings'
+import { PaperlessUser } from 'src/app/data/paperless-user'
 import { DocumentListViewService } from 'src/app/services/document-list-view.service'
 import {
   PermissionsService,
@@ -44,13 +40,6 @@ import {
 } from 'src/app/services/settings.service'
 import { ToastService, Toast } from 'src/app/services/toast.service'
 import { ComponentWithPermissions } from '../../with-permissions/with-permissions.component'
-import { SystemStatusDialogComponent } from '../../common/system-status-dialog/system-status-dialog.component'
-import { SystemStatusService } from 'src/app/services/system-status.service'
-import {
-  SystemStatusItemStatus,
-  SystemStatus,
-} from 'src/app/data/system-status'
-import { DisplayMode } from 'src/app/data/document'
 
 enum SettingsNavIDs {
   General = 1,
@@ -59,12 +48,6 @@ enum SettingsNavIDs {
   SavedViews = 4,
 }
 
-const systemLanguage = { code: '', name: $localize`Use system language` }
-const systemDateFormat = {
-  code: '',
-  name: $localize`Use date format of display language`,
-}
-
 @Component({
   selector: 'pngx-settings',
   templateUrl: './settings.component.html',
@@ -74,8 +57,8 @@ export class SettingsComponent
   extends ComponentWithPermissions
   implements OnInit, AfterViewInit, OnDestroy, DirtyComponent
 {
+  SettingsNavIDs = SettingsNavIDs
   activeNavID: number
-  DisplayMode = DisplayMode
 
   savedViewGroup = new FormGroup({})
 
@@ -99,9 +82,6 @@ export class SettingsComponent
     defaultPermsViewGroups: new FormControl(null),
     defaultPermsEditUsers: new FormControl(null),
     defaultPermsEditGroups: new FormControl(null),
-    documentEditingRemoveInboxTags: new FormControl(null),
-    searchDbOnly: new FormControl(null),
-    searchLink: new FormControl(null),
 
     notificationsConsumerNewDocument: new FormControl(null),
     notificationsConsumerSuccess: new FormControl(null),
@@ -112,11 +92,7 @@ export class SettingsComponent
     savedViews: this.savedViewGroup,
   })
 
-  savedViews: SavedView[]
-  SettingsNavIDs = SettingsNavIDs
-  get displayFields() {
-    return this.settings.allDisplayFields
-  }
+  savedViews: PaperlessSavedView[]
 
   store: BehaviorSubject<any>
   storeSub: Subscription
@@ -125,22 +101,8 @@ export class SettingsComponent
   unsubscribeNotifier: Subject<any> = new Subject()
   savePending: boolean = false
 
-  users: User[]
-  groups: Group[]
-
-  public systemStatus: SystemStatus
-
-  public readonly GlobalSearchType = GlobalSearchType
-
-  get systemStatusHasErrors(): boolean {
-    return (
-      this.systemStatus.database.status === SystemStatusItemStatus.ERROR ||
-      this.systemStatus.tasks.redis_status === SystemStatusItemStatus.ERROR ||
-      this.systemStatus.tasks.celery_status === SystemStatusItemStatus.ERROR ||
-      this.systemStatus.tasks.index_status === SystemStatusItemStatus.ERROR ||
-      this.systemStatus.tasks.classifier_status === SystemStatusItemStatus.ERROR
-    )
-  }
+  users: PaperlessUser[]
+  groups: PaperlessGroup[]
 
   get computedDateLocale(): string {
     return (
@@ -162,9 +124,7 @@ export class SettingsComponent
     private usersService: UserService,
     private groupsService: GroupService,
     private router: Router,
-    public permissionsService: PermissionsService,
-    private modalService: NgbModal,
-    private systemStatusService: SystemStatusService
+    public permissionsService: PermissionsService
   ) {
     super()
     this.settings.settingsSaved.subscribe(() => {
@@ -305,11 +265,6 @@ export class SettingsComponent
       defaultPermsEditGroups: this.settings.get(
         SETTINGS_KEYS.DEFAULT_PERMS_EDIT_GROUPS
       ),
-      documentEditingRemoveInboxTags: this.settings.get(
-        SETTINGS_KEYS.DOCUMENT_EDITING_REMOVE_INBOX_TAGS
-      ),
-      searchDbOnly: this.settings.get(SETTINGS_KEYS.SEARCH_DB_ONLY),
-      searchLink: this.settings.get(SETTINGS_KEYS.SEARCH_FULL_TYPE),
       savedViews: {},
     }
   }
@@ -351,9 +306,6 @@ export class SettingsComponent
           name: view.name,
           show_on_dashboard: view.show_on_dashboard,
           show_in_sidebar: view.show_in_sidebar,
-          page_size: view.page_size,
-          display_mode: view.display_mode,
-          display_fields: view.display_fields,
         }
         this.savedViewGroup.addControl(
           view.id.toString(),
@@ -362,9 +314,6 @@ export class SettingsComponent
             name: new FormControl(null),
             show_on_dashboard: new FormControl(null),
             show_in_sidebar: new FormControl(null),
-            page_size: new FormControl(null),
-            display_mode: new FormControl(null),
-            display_fields: new FormControl([]),
           })
         )
       }
@@ -401,12 +350,6 @@ export class SettingsComponent
       // prevents loss of unsaved changes
       this.settingsForm.patchValue(currentFormValue)
     }
-
-    if (this.permissionsService.isAdmin()) {
-      this.systemStatusService.get().subscribe((status) => {
-        this.systemStatus = status
-      })
-    }
   }
 
   private emptyGroup(group: FormGroup) {
@@ -414,12 +357,12 @@ export class SettingsComponent
   }
 
   ngOnDestroy() {
-    if (this.isDirty) this.settings.updateAppearanceSettings() // in case user changed appearance but didn't save
+    if (this.isDirty) this.settings.updateAppearanceSettings() // in case user changed appearance but didnt save
     this.storeSub && this.storeSub.unsubscribe()
     this.settings.organizingSidebarSavedViews = false
   }
 
-  deleteSavedView(savedView: SavedView) {
+  deleteSavedView(savedView: PaperlessSavedView) {
     this.savedViewService.delete(savedView).subscribe(() => {
       this.savedViewGroup.removeControl(savedView.id.toString())
       this.savedViews.splice(this.savedViews.indexOf(savedView), 1)
@@ -473,7 +416,7 @@ export class SettingsComponent
     )
     this.settings.set(
       SETTINGS_KEYS.THEME_COLOR,
-      this.settingsForm.value.themeColor
+      this.settingsForm.value.themeColor.toString()
     )
     this.settings.set(
       SETTINGS_KEYS.USE_NATIVE_PDF_VIEWER,
@@ -535,18 +478,6 @@ export class SettingsComponent
       SETTINGS_KEYS.DEFAULT_PERMS_EDIT_GROUPS,
       this.settingsForm.value.defaultPermsEditGroups
     )
-    this.settings.set(
-      SETTINGS_KEYS.DOCUMENT_EDITING_REMOVE_INBOX_TAGS,
-      this.settingsForm.value.documentEditingRemoveInboxTags
-    )
-    this.settings.set(
-      SETTINGS_KEYS.SEARCH_DB_ONLY,
-      this.settingsForm.value.searchDbOnly
-    )
-    this.settings.set(
-      SETTINGS_KEYS.SEARCH_FULL_TYPE,
-      this.settingsForm.value.searchLink
-    )
     this.settings.setLanguage(this.settingsForm.value.displayLanguage)
     this.settings
       .storeSettings()
@@ -555,8 +486,8 @@ export class SettingsComponent
       .subscribe({
         next: () => {
           this.store.next(this.settingsForm.value)
+          this.documentListViewService.updatePageSize()
           this.settings.updateAppearanceSettings()
-          this.settings.initializeDisplayFields()
           let savedToast: Toast = {
             content: $localize`Settings were saved successfully.`,
             delay: 5000,
@@ -581,11 +512,15 @@ export class SettingsComponent
   }
 
   get displayLanguageOptions(): LanguageOption[] {
-    return [systemLanguage].concat(this.settings.getLanguageOptions())
+    return [{ code: '', name: $localize`Use system language` }].concat(
+      this.settings.getLanguageOptions()
+    )
   }
 
   get dateLocaleOptions(): LanguageOption[] {
-    return [systemDateFormat].concat(this.settings.getDateLocaleOptions())
+    return [
+      { code: '', name: $localize`Use date format of display language` },
+    ].concat(this.settings.getDateLocaleOptions())
   }
 
   get today() {
@@ -594,7 +529,7 @@ export class SettingsComponent
 
   saveSettings() {
     // only patch views that have actually changed
-    const changed: SavedView[] = []
+    const changed: PaperlessSavedView[] = []
     Object.values(this.savedViewGroup.controls)
       .filter((g: FormGroup) => !g.pristine)
       .forEach((group: FormGroup) => {
@@ -617,21 +552,7 @@ export class SettingsComponent
     }
   }
 
-  reset() {
-    this.settingsForm.patchValue(this.store.getValue())
-  }
-
   clearThemeColor() {
     this.settingsForm.get('themeColor').patchValue('')
   }
-
-  showSystemStatus() {
-    const modal: NgbModalRef = this.modalService.open(
-      SystemStatusDialogComponent,
-      {
-        size: 'xl',
-      }
-    )
-    modal.componentInstance.status = this.systemStatus
-  }
 }

src-ui/src/app/components/admin/tasks/tasks.component.html

@@ -1,27 +1,31 @@
-<pngx-page-header
-  title="File Tasks"
-  i18n-title
-  info="File Tasks shows you documents that have been consumed, are waiting to be, or may have failed during the process."
-  i18n-info
-  >
-  <div class="btn-toolbar col col-md-auto align-items-center">
+<pngx-page-header title="File Tasks" i18n-title>
+  <div class="btn-toolbar col col-md-auto">
     <button class="btn btn-sm btn-outline-secondary me-2" (click)="clearSelection()" [hidden]="selectedTasks.size === 0">
-      <i-bs name="x"></i-bs>&nbsp;<ng-container i18n>Clear selection</ng-container>
+      <svg class="sidebaricon" fill="currentColor">
+        <use xlink:href="assets/bootstrap-icons.svg#x"/>
+      </svg>&nbsp;<ng-container i18n>Clear selection</ng-container>
     </button>
     <button class="btn btn-sm btn-outline-primary me-4" (click)="dismissTasks()" *pngxIfPermissions="{ action: PermissionAction.Change, type: PermissionType.PaperlessTask }" [disabled]="tasksService.total === 0">
-      <i-bs name="check2-all"></i-bs>&nbsp;{{dismissButtonText}}
+      <svg class="sidebaricon" fill="currentColor">
+        <use xlink:href="assets/bootstrap-icons.svg#check2-all"/>
+      </svg>&nbsp;<ng-container i18n>{{dismissButtonText}}</ng-container>
+    </button>
+    <button class="btn btn-sm btn-outline-primary" (click)="tasksService.reload()">
+      <svg *ngIf="!tasksService.loading" class="sidebaricon" fill="currentColor">
+        <use xlink:href="assets/bootstrap-icons.svg#arrow-clockwise"/>
+      </svg>
+      <ng-container *ngIf="tasksService.loading">
+        <div class="spinner-border spinner-border-sm fw-normal" role="status"></div>
+        <div class="visually-hidden" i18n>Loading...</div>
+      </ng-container>&nbsp;<ng-container i18n>Refresh</ng-container>
     </button>
-    <div class="form-check form-switch mb-0">
-      <input class="form-check-input" type="checkbox" role="switch" id="autoRefreshSwitch" (click)="toggleAutoRefresh()" [attr.checked]="autoRefreshInterval">
-      <label class="form-check-label" for="autoRefreshSwitch" i18n>Auto refresh</label>
-    </div>
   </div>
 </pngx-page-header>
 
-@if (!tasksService.completedFileTasks && tasksService.loading) {
+<ng-container *ngIf="!tasksService.completedFileTasks && tasksService.loading">
   <div class="spinner-border spinner-border-sm fw-normal ms-2 me-auto" role="status"></div>
   <div class="visually-hidden" i18n>Loading...</div>
-}
+</ng-container>
 
 <ng-template let-tasks="tasks" #tasksTemplate>
   <table class="table table-striped align-middle border shadow-sm">
@@ -29,124 +33,99 @@
       <tr>
         <th scope="col">
           <div class="form-check">
-            <input type="checkbox" class="form-check-input" id="all-tasks" [disabled]="currentTasks.length === 0" [(ngModel)]="togggleAll" (click)="toggleAll($event); $event.stopPropagation();">
+            <input type="checkbox" class="form-check-input" id="all-tasks" [disabled]="currentTasks.length === 0" (click)="toggleAll($event); $event.stopPropagation();">
             <label class="form-check-label" for="all-tasks"></label>
           </div>
         </th>
         <th scope="col" i18n>Name</th>
         <th scope="col" class="d-none d-lg-table-cell" i18n>Created</th>
-        @if (activeTab !== 'started' && activeTab !== 'queued') {
-          <th scope="col" class="d-none d-lg-table-cell" i18n>Results</th>
-        }
+        <th scope="col" class="d-none d-lg-table-cell" *ngIf="activeTab !== 'started' && activeTab !== 'queued'" i18n>Results</th>
         <th scope="col" class="d-table-cell d-lg-none" i18n>Info</th>
         <th scope="col" i18n>Actions</th>
       </tr>
     </thead>
     <tbody>
-      @for (task of tasks | slice: (page-1) * pageSize : page * pageSize; track task) {
-        <tr (click)="toggleSelected(task, $event); $event.stopPropagation();">
-          <td>
-            <div class="form-check">
-              <input type="checkbox" class="form-check-input" id="task{{task.id}}" [checked]="selectedTasks.has(task.id)" (click)="toggleSelected(task, $event); $event.stopPropagation();">
-              <label class="form-check-label" for="task{{task.id}}"></label>
-            </div>
-          </td>
-          <td class="overflow-auto name-col">{{ task.task_file_name }}</td>
-          <td class="d-none d-lg-table-cell">{{ task.date_created | customDate:'short' }}</td>
-          @if (activeTab !== 'started' && activeTab !== 'queued') {
-            <td class="d-none d-lg-table-cell">
-              @if (task.result?.length > 50) {
-                <div class="result" (click)="expandTask(task); $event.stopPropagation();"
-                  [ngbPopover]="resultPopover" popoverClass="shadow small mobile" triggers="mouseenter:mouseleave" container="body">
-                  <span class="small d-none d-md-inline-block font-monospace text-muted">{{ task.result | slice:0:50 }}&hellip;</span>
-                </div>
-              }
-              @if (task.result?.length <= 50) {
-                <span class="small d-none d-md-inline-block font-monospace text-muted">{{ task.result }}</span>
-              }
-              <ng-template #resultPopover>
-                <pre class="small mb-0">{{ task.result | slice:0:300 }}@if (task.result.length > 300) {
-                  &hellip;
-                }</pre>
-                @if (task.result?.length > 300) {
-                  <br/><em>(<ng-container i18n>click for full output</ng-container>)</em>
-                }
-              </ng-template>
-            </td>
-          }
-          <td class="d-lg-none">
-            <button class="btn btn-link" (click)="expandTask(task); $event.stopPropagation();">
-              <i-bs width="1.2em" height="1.2em" name="info-circle"></i-bs>
+      <ng-container *ngFor="let task of tasks | slice: (page-1) * pageSize : page * pageSize">
+      <tr (click)="toggleSelected(task, $event); $event.stopPropagation();">
+        <td>
+          <div class="form-check">
+            <input type="checkbox" class="form-check-input" id="task{{task.id}}" [checked]="selectedTasks.has(task.id)" (click)="toggleSelected(task, $event); $event.stopPropagation();">
+            <label class="form-check-label" for="task{{task.id}}"></label>
+          </div>
+        </td>
+        <td class="overflow-auto name-col">{{ task.task_file_name }}</td>
+        <td class="d-none d-lg-table-cell">{{ task.date_created | customDate:'short' }}</td>
+        <td class="d-none d-lg-table-cell" *ngIf="activeTab !== 'started' && activeTab !== 'queued'">
+          <div *ngIf="task.result?.length > 50" class="result" (click)="expandTask(task); $event.stopPropagation();"
+            [ngbPopover]="resultPopover" popoverClass="shadow small mobile" triggers="mouseenter:mouseleave" container="body">
+            <span class="small d-none d-md-inline-block font-monospace text-muted">{{ task.result | slice:0:50 }}&hellip;</span>
+          </div>
+          <span *ngIf="task.result?.length <= 50" class="small d-none d-md-inline-block font-monospace text-muted">{{ task.result }}</span>
+          <ng-template #resultPopover>
+            <pre class="small mb-0">{{ task.result | slice:0:300 }}<ng-container *ngIf="task.result.length > 300">&hellip;</ng-container></pre>
+            <ng-container *ngIf="task.result?.length > 300"><br/><em>(<ng-container i18n>click for full output</ng-container>)</em></ng-container>
+          </ng-template>
+        </td>
+        <td class="d-lg-none">
+          <button class="btn btn-link" (click)="expandTask(task); $event.stopPropagation();">
+            <svg fill="currentColor" class="" width="1.2em" height="1.2em" style="vertical-align: text-top;" viewBox="0 0 16 16">
+              <use xlink:href="assets/bootstrap-icons.svg#info-circle" />
+            </svg>
+          </button>
+        </td>
+        <td scope="row">
+          <div class="btn-group" role="group">
+            <button class="btn btn-sm btn-outline-secondary" (click)="dismissTask(task); $event.stopPropagation();" *pngxIfPermissions="{ action: PermissionAction.Change, type: PermissionType.PaperlessTask }">
+              <svg class="sidebaricon" fill="currentColor">
+                <use xlink:href="assets/bootstrap-icons.svg#check"/>
+              </svg>&nbsp;<ng-container i18n>Dismiss</ng-container>
             </button>
-          </td>
-          <td scope="row">
-            <div class="btn-group" role="group">
-              <button class="btn btn-sm btn-outline-secondary" (click)="dismissTask(task); $event.stopPropagation();" *pngxIfPermissions="{ action: PermissionAction.Change, type: PermissionType.PaperlessTask }">
-                <i-bs name="check"></i-bs>&nbsp;<ng-container i18n>Dismiss</ng-container>
+            <ng-container *pngxIfPermissions="{ action: PermissionAction.View, type: PermissionType.Document }">
+              <button *ngIf="task.related_document" class="btn btn-sm btn-outline-primary" (click)="dismissAndGo(task); $event.stopPropagation();">
+                <svg class="sidebaricon" fill="currentColor">
+                  <use xlink:href="assets/bootstrap-icons.svg#file-text"/>
+                </svg>&nbsp;<ng-container i18n>Open Document</ng-container>
               </button>
-              <ng-container *pngxIfPermissions="{ action: PermissionAction.View, type: PermissionType.Document }">
-                @if (task.related_document) {
-                  <button class="btn btn-sm btn-outline-primary" (click)="dismissAndGo(task); $event.stopPropagation();">
-                    <i-bs name="file-text"></i-bs>&nbsp;<ng-container i18n>Open Document</ng-container>
-                  </button>
-                }
-              </ng-container>
-            </div>
-          </td>
-        </tr>
-        <tr>
-          <td class="p-0" [class.border-0]="expandedTask !== task.id" colspan="5">
-            <pre #collapse="ngbCollapse" [ngbCollapse]="expandedTask !== task.id" class="small mb-0"><div class="small p-1 p-lg-3 ms-lg-3">{{ task.result }}</div></pre>
-          </td>
-        </tr>
-      }
+            </ng-container>
+          </div>
+        </td>
+      </tr>
+      <tr>
+        <td class="p-0" [class.border-0]="expandedTask !== task.id" colspan="5">
+          <pre #collapse="ngbCollapse" [ngbCollapse]="expandedTask !== task.id" class="small mb-0"><div class="small p-1 p-lg-3 ms-lg-3">{{ task.result }}</div></pre>
+        </td>
+      </tr>
+      </ng-container>
     </tbody>
   </table>
 
   <div class="pb-3 d-sm-flex justify-content-between align-items-center">
-    @if (tasks.length > 0) {
-      <div class="pb-2 pb-sm-0">
-        <ng-container i18n>{tasks.length, plural, =1 {One {{this.activeTabLocalized}} task} other {{{tasks.length || 0}} total {{this.activeTabLocalized}} tasks}}</ng-container>
-        @if (selectedTasks.size > 0) {
-          <ng-container i18n>&nbsp;({{selectedTasks.size}} selected)</ng-container>
-        }
-      </div>
-    }
-    @if (tasks.length > pageSize) {
-      <ngb-pagination [(page)]="page" [pageSize]="pageSize" [collectionSize]="tasks.length" maxSize="8" size="sm"></ngb-pagination>
-    }
+    <div class="pb-2 pb-sm-0" i18n *ngIf="tasks.length > 0">{tasks.length, plural, =1 {One {{this.activeTabLocalized}} task} other {{{tasks.length || 0}} total {{this.activeTabLocalized}} tasks}}</div>
+    <ngb-pagination *ngIf="tasks.length > pageSize" [(page)]="page" [pageSize]="pageSize" [collectionSize]="tasks.length" maxSize="8" size="sm"></ngb-pagination>
   </div>
 </ng-template>
 
 <ul ngbNav #nav="ngbNav" [(activeId)]="activeTab" class="nav-tabs" (hidden)="duringTabChange($event)">
   <li ngbNavItem="failed">
-    <a ngbNavLink i18n>Failed@if (tasksService.failedFileTasks.length > 0) {
-      <span class="badge bg-danger ms-2">{{tasksService.failedFileTasks.length}}</span>
-    }</a>
+    <a ngbNavLink i18n>Failed<span *ngIf="tasksService.failedFileTasks.length > 0" class="badge bg-danger ms-2">{{tasksService.failedFileTasks.length}}</span></a>
     <ng-template ngbNavContent>
       <ng-container [ngTemplateOutlet]="tasksTemplate" [ngTemplateOutletContext]="{tasks:tasksService.failedFileTasks}"></ng-container>
     </ng-template>
   </li>
   <li ngbNavItem="completed">
-    <a ngbNavLink i18n>Complete@if (tasksService.completedFileTasks.length > 0) {
-      <span class="badge bg-secondary ms-2">{{tasksService.completedFileTasks.length}}</span>
-    }</a>
+    <a ngbNavLink i18n>Complete<span *ngIf="tasksService.completedFileTasks.length > 0" class="badge bg-secondary ms-2">{{tasksService.completedFileTasks.length}}</span></a>
     <ng-template ngbNavContent>
       <ng-container [ngTemplateOutlet]="tasksTemplate" [ngTemplateOutletContext]="{tasks:tasksService.completedFileTasks}"></ng-container>
     </ng-template>
   </li>
   <li ngbNavItem="started">
-    <a ngbNavLink i18n>Started@if (tasksService.startedFileTasks.length > 0) {
-      <span class="badge bg-secondary ms-2">{{tasksService.startedFileTasks.length}}</span>
-    }</a>
+    <a ngbNavLink i18n>Started<span *ngIf="tasksService.startedFileTasks.length > 0" class="badge bg-secondary ms-2">{{tasksService.startedFileTasks.length}}</span></a>
     <ng-template ngbNavContent>
       <ng-container [ngTemplateOutlet]="tasksTemplate" [ngTemplateOutletContext]="{tasks:tasksService.startedFileTasks}"></ng-container>
     </ng-template>
   </li>
   <li ngbNavItem="queued">
-    <a ngbNavLink i18n>Queued@if (tasksService.queuedFileTasks.length > 0) {
-      <span class="badge bg-secondary ms-2">{{tasksService.queuedFileTasks.length}}</span>
-    }</a>
+    <a ngbNavLink i18n>Queued<span *ngIf="tasksService.queuedFileTasks.length > 0" class="badge bg-secondary ms-2">{{tasksService.queuedFileTasks.length}}</span></a>
     <ng-template ngbNavContent>
       <ng-container [ngTemplateOutlet]="tasksTemplate" [ngTemplateOutletContext]="{tasks:tasksService.queuedFileTasks}"></ng-container>
     </ng-template>

src-ui/src/app/components/admin/tasks/tasks.component.spec.ts

@@ -1,7 +1,7 @@
 import { DatePipe } from '@angular/common'
 import {
   HttpTestingController,
-  provideHttpClientTesting,
+  HttpClientTestingModule,
 } from '@angular/common/http/testing'
 import { ComponentFixture, TestBed } from '@angular/core/testing'
 import { By } from '@angular/platform-browser'
@@ -28,9 +28,6 @@ import { ConfirmDialogComponent } from '../../common/confirm-dialog/confirm-dial
 import { PageHeaderComponent } from '../../common/page-header/page-header.component'
 import { TasksComponent } from './tasks.component'
 import { PermissionsGuard } from 'src/app/guards/permissions.guard'
-import { NgxBootstrapIconsModule, allIcons } from 'ngx-bootstrap-icons'
-import { FormsModule } from '@angular/forms'
-import { provideHttpClient, withInterceptorsFromDi } from '@angular/common/http'
 
 const tasks: PaperlessTask[] = [
   {
@@ -115,7 +112,6 @@ describe('TasksComponent', () => {
   let modalService: NgbModal
   let router: Router
   let httpTestingController: HttpTestingController
-  let reloadSpy
 
   beforeEach(async () => {
     TestBed.configureTestingModule({
@@ -126,12 +122,6 @@ describe('TasksComponent', () => {
         CustomDatePipe,
         ConfirmDialogComponent,
       ],
-      imports: [
-        NgbModule,
-        RouterTestingModule.withRoutes(routes),
-        NgxBootstrapIconsModule.pick(allIcons),
-        FormsModule,
-      ],
       providers: [
         {
           provide: PermissionsService,
@@ -142,19 +132,20 @@ describe('TasksComponent', () => {
         CustomDatePipe,
         DatePipe,
         PermissionsGuard,
-        provideHttpClient(withInterceptorsFromDi()),
-        provideHttpClientTesting(),
+      ],
+      imports: [
+        NgbModule,
+        HttpClientTestingModule,
+        RouterTestingModule.withRoutes(routes),
       ],
     }).compileComponents()
 
     tasksService = TestBed.inject(TasksService)
-    reloadSpy = jest.spyOn(tasksService, 'reload')
     httpTestingController = TestBed.inject(HttpTestingController)
     modalService = TestBed.inject(NgbModal)
     router = TestBed.inject(Router)
     fixture = TestBed.createComponent(TasksComponent)
     component = fixture.componentInstance
-    jest.useFakeTimers()
     fixture.detectChanges()
     httpTestingController
       .expectOne(`${environment.apiBaseUrl}tasks/`)
@@ -173,7 +164,7 @@ describe('TasksComponent', () => {
       `Failed${currentTasksLength}`
     )
     expect(
-      fixture.debugElement.queryAll(By.css('table input[type="checkbox"]'))
+      fixture.debugElement.queryAll(By.css('input[type="checkbox"]'))
     ).toHaveLength(currentTasksLength + 1)
 
     currentTasksLength = tasks.filter(
@@ -254,7 +245,7 @@ describe('TasksComponent', () => {
 
   it('should support toggle all tasks', () => {
     const toggleCheck = fixture.debugElement.query(
-      By.css('table input[type=checkbox]')
+      By.css('input[type=checkbox]')
     )
     toggleCheck.nativeElement.dispatchEvent(new MouseEvent('click'))
     fixture.detectChanges()
@@ -278,15 +269,4 @@ describe('TasksComponent', () => {
       tasks[3].related_document,
     ])
   })
-
-  it('should auto refresh, allow toggle', () => {
-    expect(reloadSpy).toHaveBeenCalledTimes(1)
-    jest.advanceTimersByTime(5000)
-    expect(reloadSpy).toHaveBeenCalledTimes(2)
-
-    component.toggleAutoRefresh()
-    expect(component.autoRefreshInterval).toBeNull()
-    jest.advanceTimersByTime(6000)
-    expect(reloadSpy).toHaveBeenCalledTimes(2)
-  })
 })

src-ui/src/app/components/admin/tasks/tasks.component.ts

@@ -18,14 +18,11 @@ export class TasksComponent
 {
   public activeTab: string
   public selectedTasks: Set<number> = new Set()
-  public togggleAll: boolean = false
   public expandedTask: number
 
   public pageSize: number = 25
   public page: number = 1
 
-  public autoRefreshInterval: any
-
   get dismissButtonText(): string {
     return this.selectedTasks.size > 0
       ? $localize`Dismiss selected`
@@ -42,12 +39,10 @@ export class TasksComponent
 
   ngOnInit() {
     this.tasksService.reload()
-    this.toggleAutoRefresh()
   }
 
   ngOnDestroy() {
     this.tasksService.cancelPending()
-    clearInterval(this.autoRefreshInterval)
   }
 
   dismissTask(task: PaperlessTask) {
@@ -121,7 +116,6 @@ export class TasksComponent
   }
 
   clearSelection() {
-    this.togggleAll = false
     this.selectedTasks.clear()
   }
 
@@ -141,15 +135,4 @@ export class TasksComponent
         return $localize`failed`
     }
   }
-
-  toggleAutoRefresh(): void {
-    if (this.autoRefreshInterval) {
-      clearInterval(this.autoRefreshInterval)
-      this.autoRefreshInterval = null
-    } else {
-      this.autoRefreshInterval = setInterval(() => {
-        this.tasksService.reload()
-      }, 5000)
-    }
-  }
 }

src-ui/src/app/components/admin/trash/trash.component.html

@@ -1,98 +0,0 @@
-<pngx-page-header
-    title="Trash"
-    i18n-title
-    info="Manage trashed documents that are pending deletion."
-    i18n-info
-    infoLink="usage/#document-trash">
-    <button class="btn btn-sm btn-outline-secondary" (click)="clearSelection()" [hidden]="selectedDocuments.size === 0">
-        <i-bs name="x"></i-bs>&nbsp;<ng-container i18n>Clear selection</ng-container>
-    </button>
-    <button type="button" class="btn btn-sm btn-outline-primary" (click)="restoreAll(selectedDocuments)" [disabled]="selectedDocuments.size === 0">
-        <i-bs name="arrow-counterclockwise"></i-bs>&nbsp;<ng-container i18n>Restore selected</ng-container>
-    </button>
-    <button type="button" class="btn btn-sm btn-outline-danger" (click)="emptyTrash(selectedDocuments)" [disabled]="selectedDocuments.size === 0">
-        <i-bs name="trash"></i-bs>&nbsp;<ng-container i18n>Delete selected</ng-container>
-    </button>
-    <button type="button" class="btn btn-sm btn-outline-danger" (click)="emptyTrash()" [disabled]="documentsInTrash.length === 0">
-        <i-bs name="trash"></i-bs>&nbsp;<ng-container i18n>Empty trash</ng-container>
-    </button>
-</pngx-page-header>
-
-<div class="row mb-3">
-    <ngb-pagination class="col-auto" [pageSize]="25" [collectionSize]="totalDocuments" [(page)]="page" [maxSize]="5" (pageChange)="reload()" size="sm" aria-label="Pagination"></ngb-pagination>
-</div>
-
-<div class="card border table-responsive mb-3">
-    <table class="table table-striped align-middle shadow-sm mb-0">
-        <thead>
-            <tr>
-            <th scope="col">
-                <div class="form-check m-0 ms-2 me-n2">
-                <input type="checkbox" class="form-check-input" id="all-objects" [(ngModel)]="allToggled" [disabled]="documentsInTrash.length === 0" (click)="toggleAll($event); $event.stopPropagation();">
-                <label class="form-check-label" for="all-objects"></label>
-                </div>
-            </th>
-            <th scope="col" class="fw-normal" i18n>Name</th>
-            <th scope="col" class="fw-normal d-none d-sm-table-cell" i18n>Remaining</th>
-            <th scope="col" class="fw-normal" i18n>Actions</th>
-            </tr>
-        </thead>
-        <tbody>
-            @if (isLoading) {
-                <tr>
-                    <td colspan="5">
-                    <div class="spinner-border spinner-border-sm me-2" role="status"></div>
-                    <ng-container i18n>Loading...</ng-container>
-                    </td>
-                </tr>
-            }
-            @for (document of documentsInTrash; track document.id) {
-                <tr (click)="toggleSelected(document); $event.stopPropagation();">
-                    <td>
-                    <div class="form-check m-0 ms-2 me-n2">
-                        <input type="checkbox" class="form-check-input" id="{{document.id}}" [checked]="selectedDocuments.has(document.id)" (click)="toggleSelected(document); $event.stopPropagation();">
-                        <label class="form-check-label" for="{{document.id}}"></label>
-                    </div>
-                    </td>
-                    <td scope="row">{{ document.title }}</td>
-                    <td scope="row" i18n>{{ getDaysRemaining(document) }} days</td>
-                    <td scope="row">
-                    <div class="btn-group d-block d-sm-none">
-                        <div ngbDropdown container="body" class="d-inline-block">
-                        <button type="button" class="btn btn-link" id="actionsMenuMobile" (click)="$event.stopPropagation()" ngbDropdownToggle>
-                            <i-bs name="three-dots-vertical"></i-bs>
-                        </button>
-                        <div ngbDropdownMenu aria-labelledby="actionsMenuMobile">
-                            <button (click)="restore(document)" ngbDropdownItem i18n>Restore</button>
-                            <button (click)="delete(document)" ngbDropdownItem i18n>Delete</button>
-                        </div>
-                        </div>
-                    </div>
-                    <div class="btn-group d-none d-sm-block">
-                        <button class="btn btn-sm btn-outline-secondary" (click)="restore(document); $event.stopPropagation();">
-                            <i-bs width="1em" height="1em" name="arrow-counterclockwise"></i-bs>&nbsp;<ng-container i18n>Restore</ng-container>
-                        </button>
-                        <button class="btn btn-sm btn-outline-danger" (click)="delete(document); $event.stopPropagation();">
-                            <i-bs width="1em" height="1em" name="trash"></i-bs>&nbsp;<ng-container i18n>Delete</ng-container>
-                        </button>
-                    </div>
-                    </td>
-                </tr>
-            }
-        </tbody>
-    </table>
-</div>
-
-@if (!isLoading) {
-    <div class="d-flex mb-2">
-        <div>
-            <ng-container i18n>{totalDocuments, plural, =1 {One document in trash} other {{{totalDocuments || 0}} total documents in trash}}</ng-container>
-            @if (selectedDocuments.size > 0) {
-                &nbsp;({{selectedDocuments.size}} selected)
-            }
-        </div>
-        @if (documentsInTrash.length > 20) {
-            <ngb-pagination class="ms-auto" [pageSize]="25" [collectionSize]="totalDocuments" [(page)]="page" [maxSize]="5" (pageChange)="reload()" size="sm" aria-label="Pagination"></ngb-pagination>
-        }
-    </div>
-}

src-ui/src/app/components/admin/trash/trash.component.spec.ts

@@ -1,200 +0,0 @@
-import { ComponentFixture, TestBed } from '@angular/core/testing'
-
-import { TrashComponent } from './trash.component'
-import { HttpClientTestingModule } from '@angular/common/http/testing'
-import { PageHeaderComponent } from '../../common/page-header/page-header.component'
-import {
-  NgbModal,
-  NgbPaginationModule,
-  NgbPopoverModule,
-} from '@ng-bootstrap/ng-bootstrap'
-import { NgxBootstrapIconsModule, allIcons } from 'ngx-bootstrap-icons'
-import { FormsModule, ReactiveFormsModule } from '@angular/forms'
-import { TrashService } from 'src/app/services/trash.service'
-import { of, throwError } from 'rxjs'
-import { ConfirmDialogComponent } from '../../common/confirm-dialog/confirm-dialog.component'
-import { By } from '@angular/platform-browser'
-import { SafeHtmlPipe } from 'src/app/pipes/safehtml.pipe'
-import { ToastService } from 'src/app/services/toast.service'
-
-const documentsInTrash = [
-  {
-    id: 1,
-    name: 'test1',
-    created: new Date('2023-03-01T10:26:03.093116Z'),
-    deleted_at: new Date('2023-03-01T10:26:03.093116Z'),
-  },
-  {
-    id: 2,
-    name: 'test2',
-    created: new Date('2023-03-01T10:26:03.093116Z'),
-    deleted_at: new Date('2023-03-01T10:26:03.093116Z'),
-  },
-]
-
-describe('TrashComponent', () => {
-  let component: TrashComponent
-  let fixture: ComponentFixture<TrashComponent>
-  let trashService: TrashService
-  let modalService: NgbModal
-  let toastService: ToastService
-
-  beforeEach(async () => {
-    await TestBed.configureTestingModule({
-      declarations: [
-        TrashComponent,
-        PageHeaderComponent,
-        ConfirmDialogComponent,
-        SafeHtmlPipe,
-      ],
-      imports: [
-        HttpClientTestingModule,
-        FormsModule,
-        ReactiveFormsModule,
-        NgbPopoverModule,
-        NgbPaginationModule,
-        NgxBootstrapIconsModule.pick(allIcons),
-      ],
-    }).compileComponents()
-
-    fixture = TestBed.createComponent(TrashComponent)
-    trashService = TestBed.inject(TrashService)
-    modalService = TestBed.inject(NgbModal)
-    toastService = TestBed.inject(ToastService)
-    component = fixture.componentInstance
-    fixture.detectChanges()
-  })
-
-  it('should call correct service method on reload', () => {
-    const trashSpy = jest.spyOn(trashService, 'getTrash')
-    trashSpy.mockReturnValue(
-      of({
-        count: 2,
-        all: documentsInTrash.map((d) => d.id),
-        results: documentsInTrash,
-      })
-    )
-    component.reload()
-    expect(trashSpy).toHaveBeenCalled()
-    expect(component.documentsInTrash).toEqual(documentsInTrash)
-  })
-
-  it('should support delete document, show error if needed', () => {
-    const trashSpy = jest.spyOn(trashService, 'emptyTrash')
-    let modal
-    modalService.activeInstances.subscribe((instances) => {
-      modal = instances[0]
-    })
-    const toastErrorSpy = jest.spyOn(toastService, 'showError')
-
-    // fail first
-    trashSpy.mockReturnValue(throwError(() => 'Error'))
-    component.delete(documentsInTrash[0])
-    modal.componentInstance.confirmClicked.next()
-    expect(toastErrorSpy).toHaveBeenCalled()
-
-    trashSpy.mockReturnValue(of('OK'))
-    component.delete(documentsInTrash[0])
-    expect(modal).toBeDefined()
-    modal.componentInstance.confirmClicked.next()
-    expect(trashSpy).toHaveBeenCalled()
-  })
-
-  it('should support empty trash, show error if needed', () => {
-    const trashSpy = jest.spyOn(trashService, 'emptyTrash')
-    let modal
-    modalService.activeInstances.subscribe((instances) => {
-      modal = instances[instances.length - 1]
-    })
-    const toastErrorSpy = jest.spyOn(toastService, 'showError')
-
-    // fail first
-    trashSpy.mockReturnValue(throwError(() => 'Error'))
-    component.emptyTrash()
-    modal.componentInstance.confirmClicked.next()
-    expect(toastErrorSpy).toHaveBeenCalled()
-
-    trashSpy.mockReturnValue(of('OK'))
-    component.emptyTrash()
-    expect(modal).toBeDefined()
-    modal.componentInstance.confirmClicked.next()
-    expect(trashSpy).toHaveBeenCalled()
-    modal.close()
-    component.emptyTrash(new Set([1, 2]))
-    modal.componentInstance.confirmClicked.next()
-    expect(trashSpy).toHaveBeenCalledWith([1, 2])
-  })
-
-  it('should support restore document, show error if needed', () => {
-    const restoreSpy = jest.spyOn(trashService, 'restoreDocuments')
-    const reloadSpy = jest.spyOn(component, 'reload')
-    const toastErrorSpy = jest.spyOn(toastService, 'showError')
-
-    // fail first
-    restoreSpy.mockReturnValue(throwError(() => 'Error'))
-    component.restore(documentsInTrash[0])
-    expect(toastErrorSpy).toHaveBeenCalled()
-    expect(reloadSpy).not.toHaveBeenCalled()
-
-    restoreSpy.mockReturnValue(of('OK'))
-    component.restore(documentsInTrash[0])
-    expect(restoreSpy).toHaveBeenCalledWith([documentsInTrash[0].id])
-    expect(reloadSpy).toHaveBeenCalled()
-  })
-
-  it('should support restore all documents, show error if needed', () => {
-    const restoreSpy = jest.spyOn(trashService, 'restoreDocuments')
-    const reloadSpy = jest.spyOn(component, 'reload')
-    const toastErrorSpy = jest.spyOn(toastService, 'showError')
-
-    // fail first
-    restoreSpy.mockReturnValue(throwError(() => 'Error'))
-    component.restoreAll()
-    expect(toastErrorSpy).toHaveBeenCalled()
-    expect(reloadSpy).not.toHaveBeenCalled()
-
-    restoreSpy.mockReturnValue(of('OK'))
-    component.restoreAll()
-    expect(restoreSpy).toHaveBeenCalled()
-    expect(reloadSpy).toHaveBeenCalled()
-    component.restoreAll(new Set([1, 2]))
-    expect(restoreSpy).toHaveBeenCalledWith([1, 2])
-  })
-
-  it('should support toggle all items in view', () => {
-    component.documentsInTrash = documentsInTrash
-    expect(component.selectedDocuments.size).toEqual(0)
-    const toggleAllSpy = jest.spyOn(component, 'toggleAll')
-    const checkButton = fixture.debugElement.queryAll(
-      By.css('input.form-check-input')
-    )[0]
-    checkButton.nativeElement.dispatchEvent(new Event('click'))
-    checkButton.nativeElement.checked = true
-    checkButton.nativeElement.dispatchEvent(new Event('click'))
-    expect(toggleAllSpy).toHaveBeenCalled()
-    expect(component.selectedDocuments.size).toEqual(documentsInTrash.length)
-  })
-
-  it('should support toggle item', () => {
-    component.selectedDocuments = new Set([1])
-    component.toggleSelected(documentsInTrash[0])
-    expect(component.selectedDocuments.size).toEqual(0)
-    component.toggleSelected(documentsInTrash[0])
-    expect(component.selectedDocuments.size).toEqual(1)
-  })
-
-  it('should support clear selection', () => {
-    component.selectedDocuments = new Set([1])
-    component.clearSelection()
-    expect(component.selectedDocuments.size).toEqual(0)
-  })
-
-  it('should correctly display days remaining', () => {
-    expect(component.getDaysRemaining(documentsInTrash[0])).toBeLessThan(0)
-    const tenDaysAgo = new Date()
-    tenDaysAgo.setDate(tenDaysAgo.getDate() - 10)
-    expect(
-      component.getDaysRemaining({ deleted_at: tenDaysAgo })
-    ).toBeGreaterThan(0) // 10 days ago but depends on month
-  })
-})